用VS2019编译重新编译ncnn

太过爱你忘了你带给我的痛 2022-08-28 05:44 329阅读 0赞

好久没碰NCNN了，以前的编译早就丢到爪哇国去了 ，想要编译一下，完全没有头绪。本着硬着头皮上的精神，再编译一遍，顺便把过程记录下来。作个备忘录。

平台：Windows10

编译工具：VS2019 community

# Protobuf3.4.0的编译与安装 #

这个Protobuf经常用，但没仔细研究过，总之，凭经验碰上了就是一个麻烦的过程。老老实实一步步来吧。

### 安装MSYS2 + mingw-w64-install.exe ###

下载Windows下的安装包，到这里去下载

[Downloads - Mingw-w64][]

(1)  安装 msys2-x86\_64-20210725.exe

(2)  安装完MSYS2后，再安装mingw-w64-install.exe，注意界面下的几个选项，

version为版本号，一般软件都是自上向下兼容的，选择最高版本就好；

Architecture指的是电脑系统为多少位，其中i686为32位，x86\_64为64位和32位交叉编译。

Threads为操作系统接口协议，符合 posix 协议的，和 Windows，如果你想要开发 Windows 程序，需要选择 win32 ，而开发 Linux、Unix、Mac OS 等其他操作系统下的程序，则需要选择 posix ；

Exception为选择异常处理模型，异常处理在开发中非常重要，你在开发的过程中，大部分的时间会耗在处理各种异常情况上。如果你之前选择了 64位，则这里有两个异常处理模型供你选择，seh 是新发明的，而 sjlj 则是古老的。seh 性能比较好，但不支持 32位。 sjlj 稳定性好，支持 32位。

Build revision构建版本号，选择最大即可。

(3)  选择路径，在MSYS2安装路径下找到/mingw64/bin，复制其路径。

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_8_color_FFFFFF_t_70_g_se_x_16][]

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_8_color_FFFFFF_t_70_g_se_x_16 1][]

安装完了后，可以启动MSYS2看一下，

$pacman -Ss (该命令会列出所有的安装工具，开发工具包等)

然后，可以直接运行一下我们的protobuf/autogen.sh，

没安装autoconf话会报错：autoconf command not found

因此，我们需要安装一下，

$pacman -S autoconf

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_7_color_FFFFFF_t_70_g_se_x_16][]

没安装automake的话会报错误：

Can't exec "aclocal": No such file or directory at /usr/share/autoconf/Autom4te/FileUtils.pm line 274.

因此，也要安装这个，

$pacman -S automake

还有，没安装libtool的话会报告

configure.ac:30: error: possibly undefined macro: AC\_PROG\_LIBTOOL

$pacman -S libtool

安装好上面三个脚本（也可以说是程序：autoconf, automake, libtool），然后就可以autogen.sh了，我的结果如下，

Administrator@XTZJ-20210830FE MINGW64 /d/vsncnn/protobuf340
    # ./autogen.sh
    + autoreconf -f -i -Wall,no-obsolete
    libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
    libtoolize: copying file 'build-aux/ltmain.sh'
    libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
    libtoolize: copying file 'm4/libtool.m4'
    libtoolize: copying file 'm4/ltoptions.m4'
    libtoolize: copying file 'm4/ltsugar.m4'
    libtoolize: copying file 'm4/ltversion.m4'
    libtoolize: copying file 'm4/lt~obsolete.m4'
    configure.ac:30: warning: The macro `AC_PROG_LIBTOOL' is obsolete.
    configure.ac:30: You should run autoupdate.
    m4/libtool.m4:99: AC_PROG_LIBTOOL is expanded from...
    configure.ac:30: the top level
    configure.ac:51: warning: The macro `AC_LANG_C' is obsolete.
    configure.ac:51: You should run autoupdate.
    ../autoconf-2.71/lib/autoconf/c.m4:72: AC_LANG_C is expanded from...
    m4/acx_pthread.m4:63: ACX_PTHREAD is expanded from...
    ../autoconf-2.71/lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
    configure.ac:51: the top level
    configure.ac:51: warning: The macro `AC_TRY_LINK' is obsolete.
    configure.ac:51: You should run autoupdate.
    ../autoconf-2.71/lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
    m4/acx_pthread.m4:63: ACX_PTHREAD is expanded from...
    ../autoconf-2.71/lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
    configure.ac:51: the top level
    configure.ac:27: installing 'build-aux/compile'
    configure.ac:30: installing 'build-aux/config.guess'
    configure.ac:30: installing 'build-aux/config.sub'
    configure.ac:24: installing 'build-aux/install-sh'
    configure.ac:24: installing 'build-aux/missing'
    Makefile.am: installing 'build-aux/depcomp'
    parallel-tests: installing 'build-aux/test-driver'
    libtoolize: putting auxiliary files in AC_CONFIG_AUX_DIR, 'build-aux'.
    libtoolize: copying file 'build-aux/ltmain.sh'
    libtoolize: Consider adding 'AC_CONFIG_MACRO_DIRS([m4])' to configure.ac,
    libtoolize: and rerunning libtoolize and aclocal.
    libtoolize: Consider adding '-I m4' to ACLOCAL_AMFLAGS in Makefile.am.
    configure.ac:25: warning: The macro `AC_PROG_LIBTOOL' is obsolete.
    configure.ac:25: You should run autoupdate.
    aclocal.m4:121: AC_PROG_LIBTOOL is expanded from...
    configure.ac:25: the top level
    configure.ac:48: warning: The macro `AC_LANG_C' is obsolete.
    configure.ac:48: You should run autoupdate.
    ../autoconf-2.71/lib/autoconf/c.m4:72: AC_LANG_C is expanded from...
    gtest/m4/acx_pthread.m4:63: ACX_PTHREAD is expanded from...
    ../autoconf-2.71/lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
    configure.ac:48: the top level
    configure.ac:48: warning: The macro `AC_TRY_LINK' is obsolete.
    configure.ac:48: You should run autoupdate.
    ../autoconf-2.71/lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
    gtest/m4/acx_pthread.m4:63: ACX_PTHREAD is expanded from...
    ../autoconf-2.71/lib/m4sugar/m4sh.m4:699: AS_IF is expanded from...
    configure.ac:48: the top level
    configure.ac:22: installing 'build-aux/compile'
    configure.ac:25: installing 'build-aux/config.guess'
    configure.ac:25: installing 'build-aux/config.sub'
    configure.ac:19: installing 'build-aux/install-sh'
    configure.ac:19: installing 'build-aux/missing'
    Makefile.am: installing 'build-aux/depcomp'
    parallel-tests: installing 'build-aux/test-driver'
    libtoolize: putting auxiliary files in '.'.
    libtoolize: copying file './ltmain.sh'
    libtoolize: putting macros in AC_CONFIG_MACRO_DIRS, 'm4'.
    libtoolize: copying file 'm4/libtool.m4'
    libtoolize: copying file 'm4/ltoptions.m4'
    libtoolize: copying file 'm4/ltsugar.m4'
    libtoolize: copying file 'm4/ltversion.m4'
    libtoolize: copying file 'm4/lt~obsolete.m4'
    configure.ac:63: warning: The macro `AC_PROG_CXX_FOR_BUILD' is obsolete.
    configure.ac:63: You should run autoupdate.
    m4/ax_prog_cxx_for_build.m4:36: AC_PROG_CXX_FOR_BUILD is expanded from...
    configure.ac:63: the top level
    configure.ac:94: warning: The macro `AC_PROG_LIBTOOL' is obsolete.
    configure.ac:94: You should run autoupdate.
    m4/libtool.m4:99: AC_PROG_LIBTOOL is expanded from...
    configure.ac:94: the top level
    configure.ac:116: warning: The macro `AC_HEADER_STDC' is obsolete.
    configure.ac:116: You should run autoupdate.
    ../autoconf-2.71/lib/autoconf/headers.m4:704: AC_HEADER_STDC is expanded from...
    configure.ac:116: the top level
    configure.ac:177: warning: The macro `AC_LANG_C' is obsolete.
    configure.ac:177: You should run autoupdate.
    ../autoconf-2.71/lib/autoconf/c.m4:72: AC_LANG_C is expanded from...
    m4/acx_pthread.m4:63: ACX_PTHREAD is expanded from...
    configure.ac:177: the top level
    configure.ac:177: warning: The macro `AC_TRY_LINK' is obsolete.
    configure.ac:177: You should run autoupdate.
    ../autoconf-2.71/lib/autoconf/general.m4:2920: AC_TRY_LINK is expanded from...
    m4/acx_pthread.m4:63: ACX_PTHREAD is expanded from...
    configure.ac:177: the top level
    configure.ac:181: warning: The macro `AC_LANG_CPLUSPLUS' is obsolete.
    configure.ac:181: You should run autoupdate.
    ../autoconf-2.71/lib/autoconf/c.m4:262: AC_LANG_CPLUSPLUS is expanded from...
    m4/stl_hash.m4:10: AC_CXX_STL_HASH is expanded from...
    configure.ac:181: the top level
    configure.ac:181: warning: The macro `AC_TRY_COMPILE' is obsolete.
    configure.ac:181: You should run autoupdate.
    ../autoconf-2.71/lib/autoconf/general.m4:2847: AC_TRY_COMPILE is expanded from...
    m4/stl_hash.m4:10: AC_CXX_STL_HASH is expanded from...
    configure.ac:181: the top level
    configure.ac:66: installing './ar-lib'
    configure.ac:61: installing './compile'
    configure.ac:46: installing './config.guess'
    configure.ac:46: installing './config.sub'
    configure.ac:48: installing './install-sh'
    configure.ac:48: installing './missing'
    benchmarks/Makefile.am: installing './depcomp'
    parallel-tests: installing './test-driver'
    + rm -rf autom4te.cache config.h.in~
    + exit 0

到这里，protobuf的准备工作基本结束。下一步，我们用cmake-gui来编译probobuf。

### Cmake-gui生成protobuf项目 ###

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_9_color_FFFFFF_t_70_g_se_x_16][]

点击1，弹出对话框，选择你的编译器，这里是VS2019；然后， 如果一切正常的话，再configure一下，你会看到下面这样的界面；接下来Generate, Open Project。

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_10_color_FFFFFF_t_70_g_se_x_16][]

Open Project后，进入VS2019的界面。再接下来就没什么可说的了，直接生成项目就好了。当然，Debug和Release的都要生成。

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_11_color_FFFFFF_t_70_g_se_x_16][]

## Cmake-GUI配置NCNN并编译 ##

到这里去下载

[https://github.com/tencent/ncnn][https_github.com_tencent_ncnn]

可以说，安装好那个protobuf后， 90%的工作就完成了，@nihui女神的NCNN工作做得还是蛮到位的，很好编译。

完事后有两个问题，有两个工具没能生成，

已启动生成…
    1>------ 已启动生成: 项目: caffe2ncnn, 配置: Debug x64 ------
    2>------ 已启动生成: 项目: onnx2ncnn, 配置: Debug x64 ------
    2>onnx2ncnn.obj : error LNK2001: 无法解析的外部符号 "private: static int google::protobuf::io::CodedInputStream::default_recursion_limit_" (?default_recursion_limit_@CodedInputStream@io@protobuf@google@@0HA)
    2>onnx2ncnn.obj : error LNK2001: 无法解析的外部符号 "class google::protobuf::internal::ExplicitlyConstructed<class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > > google::protobuf::internal::fixed_address_empty_string" (?fixed_address_empty_string@internal@protobuf@google@@3V?$ExplicitlyConstructed@V?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@123@A)
    2>onnx.pb.obj : error LNK2001: 无法解析的外部符号 "class google::protobuf::internal::ExplicitlyConstructed<class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > > google::protobuf::internal::fixed_address_empty_string" (?fixed_address_empty_string@internal@protobuf@google@@3V?$ExplicitlyConstructed@V?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@123@A)
    2>D:\vsNCNN\ncnn-master\dev\tools\onnx\Debug\onnx2ncnn.exe : fatal error LNK1120: 2 个无法解析的外部命令
    2>已完成生成项目“onnx2ncnn.vcxproj”的操作 - 失败。
    1>caffe2ncnn.obj : error LNK2001: 无法解析的外部符号 "private: static int google::protobuf::io::CodedInputStream::default_recursion_limit_" (?default_recursion_limit_@CodedInputStream@io@protobuf@google@@0HA)
    1>caffe.pb.obj : error LNK2001: 无法解析的外部符号 "class google::protobuf::internal::ExplicitlyConstructed<class std::basic_string<char,struct std::char_traits<char>,class std::allocator<char> > > google::protobuf::internal::fixed_address_empty_string" (?fixed_address_empty_string@internal@protobuf@google@@3V?$ExplicitlyConstructed@V?$basic_string@DU?$char_traits@D@std@@V?$allocator@D@2@@std@@@123@A)
    1>D:\vsNCNN\ncnn-master\dev\tools\caffe\Debug\caffe2ncnn.exe : fatal error LNK1120: 2 个无法解析的外部命令
    1>已完成生成项目“caffe2ncnn.vcxproj”的操作 - 失败。
    3>------ 已跳过生成: 项目: INSTALL, 配置: Debug x64 ------
    3>没有为此解决方案配置选中要生成的项目 
    ========== 生成: 成功 0 个，失败 2 个，最新 33 个，跳过 1 个 ==========

按道理不应该呀，检查 一下，看不出什么问题。只好Search，这里有个办法，同时也给出了原因，

[Visual Studio 2010 C++ /w Google Protocol Buffers. Cannot find 60 externals. Cannot compile - Stack Overflow][Visual Studio 2010 C_ _w Google Protocol Buffers. Cannot find 60 externals. Cannot compile - Stack Overflow]

If you are building protobufs as a DLL then you will also need to define PROTOBUF_USE_DLLS in your client application to get it to pull in the DLL import __declspec stuff properly.
    
    See https://code.google.com/p/protobuf/issues/detail?id=308#c9 for details.

所以，我们只需要在caffe2ncnn和onnx2ncc的项目属性中，也就是在预处理器 -> 预处理器定义中添加PROTOBUF\_USE\_DLLS，再重新编译，问题解决。

![watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_20_color_FFFFFF_t_70_g_se_x_16][]

好了，到这里，NCNN在Windows10下的编译就完成了。

## 使用NCNN ##

NCNN官方就是采用静态库的方式编译的，下面这官方可执行文件的下载地址（前一个），

[https://github.com/Tencent/ncnn/releases/download/20210720/ncnn-20210720-windows-vs2019.zip][https_github.com_Tencent_ncnn_releases_download_20210720_ncnn-20210720-windows-vs2019.zip]

[https://github.com/Tencent/ncnn/releases/download/20210720/ncnn-20210720-windows-vs2019-shared.zip][https_github.com_Tencent_ncnn_releases_download_20210720_ncnn-20210720-windows-vs2019-shared.zip]

需要注意的是，和官方的不同时，我们因为这里的编译是采用默认的MD/DLL的方式，所以库函数是没有编译到可执行文件中的，因此，生成exe文件后，执行时需要把下面的依赖库和exe文件放到一起，

libprotobuf.dll
    libprotobuf-lite.dll
    libprotoc.dll

如果是Debug版本，则需要下面的依赖库，

libprotobufd.dll
    libprotobuf-lited.dll
    libprotocd.dll

然后就可以正常使用了。

如果你嫌麻烦，可以直接编译成MT/Static静态库的方式。

[Downloads - Mingw-w64]: https://www.mingw-w64.org/downloads/
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_8_color_FFFFFF_t_70_g_se_x_16]: /images/20220828/d886d7a6d3f9461f8d22304da40a9d4c.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_8_color_FFFFFF_t_70_g_se_x_16 1]: /images/20220828/c03000bb830e41ccb4c99dea08ee1a44.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_7_color_FFFFFF_t_70_g_se_x_16]: /images/20220828/86ccbf2c53b64f9596611c65c93926c0.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_9_color_FFFFFF_t_70_g_se_x_16]: /images/20220828/23f1a90ad1424e12b753db9a5a75f35b.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_10_color_FFFFFF_t_70_g_se_x_16]: /images/20220828/6d29945885864200a6af769b95a7a4fc.png
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_11_color_FFFFFF_t_70_g_se_x_16]: /images/20220828/d9f088c6ff3443cbaa88bd84a772deb0.png
[https_github.com_tencent_ncnn]: https://github.com/tencent/ncnn
[Visual Studio 2010 C_ _w Google Protocol Buffers. Cannot find 60 externals. Cannot compile - Stack Overflow]: https://stackoverflow.com/questions/13733604/visual-studio-2010-c-w-google-protocol-buffers-cannot-find-60-externals-can/16065204#16065204
[watermark_type_ZHJvaWRzYW5zZmFsbGJhY2s_shadow_50_text_Q1NETiBA5Lid6LSd6KeG5YOPLemrmOeyvuW6puiuoeeul-acuuinhuiniQ_size_20_color_FFFFFF_t_70_g_se_x_16]: /images/20220828/a42535efe10b4c9aae8116bd2cf2943b.png
[https_github.com_Tencent_ncnn_releases_download_20210720_ncnn-20210720-windows-vs2019.zip]: https://github.com/Tencent/ncnn/releases/download/20210720/ncnn-20210720-windows-vs2019.zip
[https_github.com_Tencent_ncnn_releases_download_20210720_ncnn-20210720-windows-vs2019-shared.zip]: https://github.com/Tencent/ncnn/releases/download/20210720/ncnn-20210720-windows-vs2019-shared.zip