iOS绘画之UIBezierPath

叁歲伎倆 2022-07-15 08:59 238阅读 0赞

### 概述 ###

UIBezierPath用于定义一个由直线/曲线组合而成的路径, 并且可以在自定义视图中渲染该路径. 在使用的过程中, 我们只需要先指定好路径的结构, 比如一条直线、一条贝塞尔曲线、一个矩形、一个椭圆、一个圆弧等, 然后使用系统为我们提供的方法将构建好的路径渲染出来即可

UIBezierPath位于UIKit库中, 是针对Core Graphics库中的CGPathRef的封装, 其已经可以帮助我们实现一般需求, 下面让我们一起学习一下UIBezierPath的使用方法

> 注: 使用UIBezierPath绘画的代码写在自定义视图的drawRect:方法中

- (void)drawRect:(CGRect)rect
    {
        // Drawing code
    }

### 关于初始化 ###

##### \+ (instancetype)bezierPath #####

初始化一个UIBezierPath对象

UIBezierPath *path = [UIBezierPath bezierPath];

##### \+ (instancetype)bezierPathWithRect:(CGRect)rect #####

以”矩形路径”初始化一个UIBezierPath对象

// 参数一: 矩形范围 UIBezierPath *path = [UIBezierPath bezierPathWithRect:CGRectMake(20, 20, 200, 100)];

##### \+ (instancetype)bezierPathWithOvalInRect:(CGRect)rect #####

以”内切于一个矩形的椭圆路径”初始化一个UIBezierPath对象

// 参数一: 矩形范围 UIBezierPath *path = [UIBezierPath bezierPathWithOvalInRect:CGRectMake(20, 20, 200, 100)];

##### \+ (instancetype)bezierPathWithRoundedRect:(CGRect)rect cornerRadius:(CGFloat)cornerRadius #####

以”圆角矩形路径”初始化一个UIBezierPath对象

// 参数一: 矩形范围 
    // 参数二: 圆角半径, 如果半径大于矩形短边的一半, 则按照一半处理
    UIBezierPath *path = [UIBezierPath bezierPathWithRoundedRect:CGRectMake(20, 20, 200, 100) cornerRadius:30];

##### \+ (instancetype)bezierPathWithRoundedRect:(CGRect)rect byRoundingCorners:(UIRectCorner)corners cornerRadii:(CGSize)cornerRadii #####

以”可选圆弧位置的圆角矩形路径”初始化一个UIBezierPath对象

// 参数一: 矩形范围
    // 参数二: 圆弧位置, 可以多选
    // 参数三: 圆弧半径, 如果半径大于矩形短边的一半, 则按照一半处理, CGSize以小的为准(自己试的, 文档没说)
    UIBezierPath *path = [UIBezierPath bezierPathWithRoundedRect:CGRectMake(20, 20, 200, 100) byRoundingCorners:UIRectCornerAllCorners cornerRadii:CGSizeMake(30, 50)];

##### \+ (instancetype)bezierPathWithArcCenter:(CGPoint)center radius:(CGFloat)radius startAngle:(CGFloat)startAngle endAngle:(CGFloat)endAngle clockwise:(BOOL)clockwise #####

以”圆弧路径”初始化一个UIBezierPath对象

// 参数一: 圆弧圆心
    // 参数二: 圆弧半径
    // 参数三: 开始弧度
    // 参数四: 结束弧度
    // 参数五: 是否为顺时针
    UIBezierPath *path = [UIBezierPath bezierPathWithArcCenter:CGPointMake(100, 100) radius:50 startAngle:0 endAngle:M_PI clockwise:YES];

![坐标系统.jpg][.jpg]

### 关于构造一个路径 ###

##### \- (void)moveToPoint:(CGPoint)point #####

将当前点移动到指定的位置

UIBezierPath *path = [UIBezierPath bezierPath]; // 参数一: 指定的位置 [path moveToPoint:CGPointMake(20, 20)];

##### \- (void)addLineToPoint:(CGPoint)point #####

在路径中增加一条直线

UIBezierPath *path = [UIBezierPath bezierPath]; [path moveToPoint:CGPointMake(20, 20)]; // 参数一: 直线的终点位置 [path addLineToPoint:CGPointMake(100, 100)];

##### \- (void)addArcWithCenter:(CGPoint)center radius:(CGFloat)radius startAngle:(CGFloat)startAngle endAngle:(CGFloat)endAngle clockwise:(BOOL)clockwise #####

在路径中增加一条圆弧

UIBezierPath *path = [UIBezierPath bezierPath];
    [path moveToPoint:CGPointMake(20, 20)];
    [path addLineToPoint:CGPointMake(100, 20)];
    // 参数一: 圆弧圆心
    // 参数二: 圆弧半径
    // 参数三: 开始弧度
    // 参数四: 结束弧度
    // 参数五: 是否为顺时针
    [path addArcWithCenter:CGPointMake(60, 20) radius:40 startAngle:0 endAngle:M_PI clockwise:YES];

##### \- (void)addQuadCurveToPoint:(CGPoint)endPoint controlPoint:(CGPoint)controlPoint #####

在路径中增加一条二次贝塞尔曲线

UIBezierPath *path = [UIBezierPath bezierPath];
    [path moveToPoint:CGPointMake(20, 20)];
    // 参数一: 曲线的终点位置
    // 参数二: 控制点
    [path addQuadCurveToPoint:CGPointMake(100, 20) controlPoint:CGPointMake(100, 60)];

![二次贝塞尔曲线.jpg][.jpg 1]

##### \- (void)addCurveToPoint:(CGPoint)endPoint controlPoint1:(CGPoint)controlPoint1 controlPoint2:(CGPoint)controlPoint2 #####

在路径中增加一条三次贝塞尔曲线

UIBezierPath *path = [UIBezierPath bezierPath];
    [path moveToPoint:CGPointMake(20, 20)];
    // 参数一: 曲线的终点位置
    // 参数二: 第一控制点
    // 参数三: 第二控制点
    [path addCurveToPoint:CGPointMake(100, 20) controlPoint1:CGPointMake(30, 60) controlPoint2:CGPointMake(100, 100)];

![三次贝塞尔曲线.jpg][.jpg 2]

### 关于路径信息 ###

##### @property(readonly,getter=isEmpty) BOOL empty #####

是否路径信息为空, 即使通过moveToPoint:移动到指定的位置也算不为空

UIBezierPath *path = [UIBezierPath bezierPath];
    BOOL isEmpty = path.empty;

##### @property(nonatomic,readonly) CGRect bounds #####

可以封闭所有路径点的最小矩形范围, 包括多次贝塞尔曲线的控制点在内

UIBezierPath *path = [UIBezierPath bezierPath]; CGRect bounds = path.bounds;

##### @property(nonatomic,readonly) CGPoint currentPoint #####

路径当前所在点

UIBezierPath *path = [UIBezierPath bezierPath]; CGPoint currentPoint = path.currentPoint;

##### \- (BOOL)containsPoint:(CGPoint)point #####

是否包含指定点

UIBezierPath *path = [UIBezierPath bezierPath]; BOOL isContainsPoint = [path containsPoint:CGPointMake(20, 30)];

### 关于路径操作 ###

##### \- (void)closePath #####

使用一条直线闭合路径的起点和终点, 该方法同时也会更新当前点到新直线的终点(即路径的起点)

UIBezierPath *path = [UIBezierPath bezierPath]; [path moveToPoint:CGPointMake(20, 20)]; [path addLineToPoint:CGPointMake(100, 100)]; [path addLineToPoint:CGPointMake(100, 200)]; [path closePath];

##### \- (void)removeAllPoints #####

移除路径中所有的点

UIBezierPath *path = [UIBezierPath bezierPath]; [path removeAllPoints];

##### \- (void)appendPath:(UIBezierPath \*)bezierPath #####

路径中增加一个已有路径

UIBezierPath *path = [UIBezierPath bezierPath];
    UIBezierPath *path2 = [UIBezierPath bezierPath];
    [path appendPath:path2];

##### \- (UIBezierPath \*)bezierPathByReversingPath #####

返回一个翻转已有路径的新路径

UIBezierPath *path = [UIBezierPath bezierPath];
    UIBezierPath *path2 = [path bezierPathByReversingPath];

### 关于绘图 ###

##### \- (void)fill #####

利用当前绘画属性填充路径封闭范围, 该方法在绘画之前会自动将开放子路径封闭, 填充部分不包含路径本身, 所以对于线宽较大的路径, 填充部分会跟部分路径重合

UIBezierPath *path = [UIBezierPath bezierPath];
    // do something....
    [path fill];

##### \- (void)fillWithBlendMode:(CGBlendMode)blendMode alpha:(CGFloat)alpha #####

利用指定模式填充路径封闭范围, 该方法在绘画之前会自动将开放子路径封闭, 填充部分不包含路径本身, 所以对于线宽较大的路径, 填充部分会跟部分路径重合

UIBezierPath *path = [UIBezierPath bezierPath];
    // do something....
    [path fillWithBlendMode:kCGBlendModeNormal alpha:0.8];

##### \- (void)stroke #####

利用当前绘画属性沿着路径画线

UIBezierPath *path = [UIBezierPath bezierPath];
    // do something....
    [path stroke];

##### \- (void)strokeWithBlendMode:(CGBlendMode)blendMode alpha:(CGFloat)alpha #####

利用指定模式沿着路径画线

UIBezierPath *path = [UIBezierPath bezierPath];
    // do something....
    [path strokeWithBlendMode:kCGBlendModeNormal alpha:0.8];

### 关于绘画属性 ###

##### @property(nonatomic) CGFloat lineWidth #####

路径的线宽

UIBezierPath *path = [UIBezierPath bezierPath]; path.lineWidth = 10;

##### \- (void)setFill #####

路径的填充颜色

[[UIColor orangeColor] setFill];

##### \- (void)setStroke #####

路径的画线颜色

[[UIColor orangeColor] setStroke];

##### @property(nonatomic) CGLineCap lineCapStyle #####

路径的终点形状, 该属性适用于开放路径的起点和终点, 默认为kCGLineCapButt(方形结束, 结束位置正好为精确位置), 其他可选项为kCGLineCapRound(圆形结束, 结束位置超过精确位置半个线宽)和kCGLineCapSquare(方形结束, 结束位置超过精确位置半个线宽)

UIBezierPath *path = [UIBezierPath bezierPath]; path.lineCapStyle = kCGLineCapButt;

##### @property(nonatomic) CGLineJoin lineJoinStyle #####

路径的连接点形状, 默认为kCGLineJoinMiter(全部连接), 其他可选项为kCGLineJoinRound(圆形连接)和kCGLineJoinBevel(斜角连接)

UIBezierPath *path = [UIBezierPath bezierPath]; path.lineJoinStyle = kCGLineJoinMiter;

### 关于二维形变 ###

##### \- (void)applyTransform:(CGAffineTransform)transform #####

对路径中的所有点进行二维形变, 该变化立即生效, 且为永久性改变所有点

UIBezierPath *path = [UIBezierPath bezierPath]; [path applyTransform:CGAffineTransformMakeTranslation(20, 20)];

### 示例 ###

以”今日头条下拉刷新效果”为例, 练习一下绘画方式

CGAffineTransform transform = CGAffineTransformMakeTranslation((self.bounds.size.width-50*5)/2, 100);
    transform = CGAffineTransformScale(transform, 5, 5);
    
    UIBezierPath *path1 = [UIBezierPath bezierPathWithRoundedRect:CGRectMake(0, 0, 50, 50) cornerRadius:10];
    [path1 applyTransform:transform];
    [[UIColor colorWithRed:198/255.0f green:198/255.0f blue:198/255.0f alpha:1.0f] setStroke];
    [path1 stroke];
    
    UIBezierPath *path2 = [UIBezierPath bezierPathWithRect:CGRectMake(7, 10, 14, 12)];
    [path2 applyTransform:transform];
    [[UIColor colorWithRed:224/255.0f green:224/255.0f blue:224/255.0f alpha:1.0f] setFill];
    [path2 fill];
    
    UIBezierPath *path3 = [UIBezierPath bezierPathWithRect:CGRectMake(7, 10, 14, 12)];
    [path3 applyTransform:transform];
    [[UIColor colorWithRed:189/255.0f green:189/255.0f blue:189/255.0f alpha:1.0f] setStroke];
    [path3 stroke];
    
    UIBezierPath *path11 = [UIBezierPath bezierPath];
    [path11 moveToPoint:CGPointMake(28, 10)];
    [path11 addLineToPoint:CGPointMake(43, 10)];
    [path11 applyTransform:transform];
    [[UIColor colorWithRed:153/255.0f green:153/255.0f blue:153/255.0f alpha:1.0f] setStroke];
    [path11 stroke];
    
    UIBezierPath *path12 = [UIBezierPath bezierPath];
    [path12 moveToPoint:CGPointMake(28, 16)];
    [path12 addLineToPoint:CGPointMake(43, 16)];
    [path12 applyTransform:transform];
    [path12 stroke];
    
    UIBezierPath *path13 = [UIBezierPath bezierPath];
    [path13 moveToPoint:CGPointMake(28, 22)];
    [path13 addLineToPoint:CGPointMake(43, 22)];
    [path13 applyTransform:transform];
    [path13 stroke];
    
    UIBezierPath *path21 = [UIBezierPath bezierPath];
    [path21 moveToPoint:CGPointMake(7, 28)];
    [path21 addLineToPoint:CGPointMake(43, 28)];
    [path21 applyTransform:transform];
    [path21 stroke];
    
    UIBezierPath *path22 = [UIBezierPath bezierPath];
    [path22 moveToPoint:CGPointMake(7, 34)];
    [path22 addLineToPoint:CGPointMake(43, 34)];
    [path22 applyTransform:transform];
    [path22 stroke];
    
    UIBezierPath *path23 = [UIBezierPath bezierPath];
    [path23 moveToPoint:CGPointMake(7, 40)];
    [path23 addLineToPoint:CGPointMake(43, 40)];
    [path23 applyTransform:transform];
    [path23 stroke];

![今日头条示例.png][.png]

[.jpg]: /images/20220715/3cd5d5c8433a4768b5c1767100eb2824.png
[.jpg 1]: /images/20220715/50a2b167fada4856bc8d09d8d540ff1c.png
[.jpg 2]: /images/20220715/67afd6848bf740ac86771538caac8739.png
[.png]: /images/20220715/08f76fe27b0345328f3e8c422d9d723c.png