LAMP环境搭建YUM安装+源码编译安装

红太狼 2022-05-21 12:48 241阅读 0赞

yum安装很愉快：

yum install httpd mysql mysql-server php php-mysql

但是yum安装的版本可能会很低达不到要求，接下来就是编译安装。

在进行编译安装之前先yum安装httpd，将/etc/init.d/httpd该文件备份为httpd.bak备用，在利用yum卸载httpd

[root@localhost src]# yum install httpd
    [root@localhost src]# cp /etc/init.d/httpd /etc/init.d/httpd.bak
    [root@localhost src]# yum remove httpd

apache源码下载地址：http://archive.apache.org/dist/httpd

依赖包apr,apr-util下载地址：http://archive.apache.org/dist/apr

依赖包pcre下载地址：https://ftp.pcre.org/pub/pcre/

安装apr包:

[root@localhost src]# wget http://archive.apache.org/dist/apr/apr-1.5.2.tar.bz2
    [root@localhost src]# tar -jx -f apr-1.5.2.tar.bz2  apr-1.5.2
    [root@localhost src]# cd apr-1.5.2
    [root@localhost apr-1.5.2]# ./configure --prefix=/usr/local/apr
    [root@localhost apr-1.5.2]# make clean && make && make install

安装apr-util包：

[root@localhost src]# wget http://archive.apache.org/dist/apr/apr-util-1.5.2.tar.bz2
    [root@localhost src]# tar -jx -f apr-util-1.5.2.tar.bz2  apr-util-1.5.2
    [root@localhost src]# cd apr-util-1.5.2
    [root@localhost apr-util-1.5.2]# ./configure --prefix=/usr/local/apr-util  --with-apr=/usr/local/apr
    [root@localhost apr-util-1.5.2]# make clean && make && make install

安装pcre包：

[root@localhost src]# wget --no-check-certificate https://ftp.pcre.org/pub/pcre/pcre-8.42.tar.bz2
    [root@localhost src]# tar -jx -f pcre-8.42.tar.bz2  pcre-8.42
    [root@localhost src]# cd pcre-8.42
    [root@localhost pcre-8.42]# ./configure --prefix=/usr/local/pcre
    [root@localhost pcre-8.42]# make clean && make && make install

在安装pcre之前如果没有安装gcc,gcc-c++先用yum自行安装，否则不能进行编译安装！

yum 安装openssl-devel,否则可能会因为openssl版本太旧不能安装httpd

yum install openssl-devel

安装httpd

root@localhost src]# wget http://archive.apache.org/dist/httpd/httpd-2.4.29.tar.bz2
    [root@localhost src]# tar -jx -f httpd-2.4.29.tar.bz2  httpd-2.4.29
    [root@localhost src]# cd httpd-2.4.29
    [root@localhost httpd-2.4.29]# ./configure --prefix=/usr/local/apache  --sysconfdir=/etc/httpd \ 
    --with-apr=/usr/local/apr --with-apr-util=/usr/local/apr-util --with-pcre=/usr/local/pcre \ 
    --enable-mods-shared=most --enable-cgi --enable-rewrite --enable-so --enable-ssl --with-mpm=event
    [root@localhost httpd-2.4.29]# make clean && make && make install

修改/etc/httpd/httpd.conf文件,在模块mime\_module里增加

AddType application/x-httpd-php  .php

在模块dir\_module里DirectoryIndex后面添加 index.php

测试是否安装成功：

[root@localhost bin]# ./apachectl start
    [root@localhost bin]# curl http://localhost  //修改/etc/httpd/httpd.conf里面的ServerName 为localhost

将httpd加到服务列表中：

[root@localhost bin]# mv /etc/init.d/httpd.bak /etc/init.d/httpd
    [root@localhost bin]# vim /etc/init.d/httpd  //修改 apachectl、httpd的值
    apachectl=/usr/local/apache/bin/apachectl
    httpd=${HTTPD-/usr/local/apache/bin/httpd}
    pidfile=${PIDFILE-/usr/local/apache/logs/httpd.pid}
    [root@localhost bin]# chmod 755 /etc/init.d/httpd
    [root@localhost bin]# service httpd start
    [root@localhost bin]# chkconfig httpd on
    [root@localhost bin]# chkconfig --list httpd

将/usr/local/apache/bin添加到PATH中

[root@localhost bin]# vim /root/.bash_profile  //在PATH下面一行添加
    PATH=$PATH:/usr/local/apache/bin
    [root@localhost bin]# source /root/.bash_profile

接下来安装Mysql

在MySQL5.5开始就需要用cmake来进行编译安装，所以要先安装cmake，可以直接yum安装

yum install cmake

5.7.5以上版本还需要boost，但是可以不用安装，解压即可

[root@localhost src]# wget --no-check-certificate \
     https://jaist.dl.sourceforge.net/project/boost/boost/1.59.0/boost_1_59_0.tar.gz
    [root@localhost src]# tar -xz -f boost_1_59_0.tar.gz  boost_1_59_0

在安装Mysql之前需要创建mysql的用户组、用户、数据存放目录

[root@localhost /]# groupadd mysql
    [root@localhost /]# useradd -r -g mysql -s /bin/false mysql
    [root@localhost /]# mkdir -p /data/mysql_data
    [root@localhost /]# cd /data
    [root@localhost data]# chown mysql.mysql mysql_data

安装Mysql

[root@localhost src]# wget --no-check-certificate \
     https://dev.mysql.com/get/Downloads/MySQL-5.7/mysql-5.7.22.tar.gz
    [root@localhost src]# tar -zx -f mysql-5.7.22.tar.gz mysql-5.7.22
    [root@localhost src]# cd mysql-5.7.22
    [root@localhost mysql-5.7.22]# cmake . -DCMAKE_INSTALL_PREFIX=/usr/local/mysql \
     -DMYSQL_DATADIR=/mydata/mysql_data/ \
    -DDOWNLOAD_BOOST=1 -DWITH_BOOST=/usr/local/src/boost_1_59_0 -DSYSCONFDIR=/etc \
    -DENABLED_LOCAL_INFILE=1 -DENABLE_DOWNLOADS=1 -DWITH_EXTRA_CHARSETS=all \ 
    -DDEFAULT_CHARSET=utf8 -DDEFAULT_COLLATION=utf8_general_ci
    [root@localhost mysql-5.7.22]# make clean && make && make install

Mysql配置参数：https://dev.mysql.com/doc/refman/5.7/en/source-configuration-options.html

如果没有安装ncurses-devel会报错：Curses library not found. Please install appropriate package.

可以直接yum安装

yum install ncurses-devel

将mysqld加到服务列表中

[root@localhost mysql-5.7.22]# cd /usr/local/mysql/support-files
    [root@localhost support-files]# cp mysql.server /etc/init.d/mysqld
    [root@localhost support-files]# chmod 755 /etc/init.d/mysqld
    [root@localhost support-files]# chkconfig mysqld on
    [root@localhost support-files]# chkconfig --list mysqld

将/usr/local/mysql/bin添加到PATH中

[root@localhost support-files]# vim /root/.bash_profile  //在PATH下面一行添加
    PATH=$PATH:/usr/local/mysql/bin
    [root@localhost support-files]# source /root/.bash_profile

修改mysql配置文件

[root@localhost support-files]# vim /etc/my.cnf  //修改
    [client]
    port=3306
    socket=/tmp/mysql.sock
    default-character-set=utf8
    [mysqld]
    port=3306
    socket=/tmp/mysql.sock
    user=mysql
    character-set-server=utf8
    default_storage_engine=InnoDB
    pid-file=/data/mysql_data/mysql.pid
    log_error=/data/mysql_data/mysql-error.log
    [mysqldump]
    quick
    max_allowed_packet=16M

初始化Mysql数据库

[root@localhost support-files]# cd /usr/local/mysql/bin
    [root@localhost bin]# ./mysqld --initialize-insecure --user=mysql --basedir=/usr/local/mysql \
     --datadir=/data/mysql_data

启动Mysql数据库

[root@localhost bin]# /etc/init.d/mysqld start

最后是PHP安装

[root@localhost src]# wget http://hk1.php.net/get/php-5.6.36.tar.bz2/from/this/mirror
    [root@localhost src]# tar -jx -f php-5.6.36.tar.bz2 php-5.6.36
    [root@localhost src]# cd php-5.6.36
    [root@localhost php-5.6.36]# ./configure --prefix=/usr/local/php --with-config-file-path=/etc/  \
     --with-config-file-scan-dir=/etc/php.d --with-mysql=mysqlnd \
    --with-mysqli=mysqlnd --with-apxs2=/usr/local/apache/bin/apxs  --enable-sockets \
    --with-openssl --enable-mbstring --enable-xml --with-libxml-dir=/usr/ --with-freetype-dir  \
    --with-jpeg-dir --with-png-dir 
    [root@localhost php-5.6.36]# make clean && make && make install

如果没有安装libxml2、libxml2-devel会报错：

libxml2 configure: error: xml2-config not found. Please check your libxml2 installation.

直接yum安装即可：

yum install libxml2 libxml2-devel

将配置文件拷贝致/etc

[root@localhost php-5.6.36]# cp php.ini-production /etc/php.ini

至此LAMP编译安装结束，就可以到/usr/local/apache/htdocs去编辑你的php文件了!