swift开放一个容器供公共下载

àì夳堔傛蜴生んèń 2024-04-17 22:29 49阅读 0赞

### swift开放一个容器供公共下载   ###

I'm testing swift 1.3 with the last swift-saio.sh (on one VM) + staticweb configuration.

The goal is to provide static web content.

I did "st" commands to allow public view of a container as follow:

\#\# let's allow everyone read acces  
\# st -v -A [http://192.168.0.10:8080/auth/v1.0][http_192.168.0.10_8080_auth_v1.0] -U swiftops:swiftops -K swiftops post -r '.r:\*' test

\#\# Configure web listings  
\# st -v -A [http://192.168.0.10:8080/auth/v1.0][http_192.168.0.10_8080_auth_v1.0] -U swiftops:swiftops -K swiftops post -m 'web-listings: true' test

\#\# let's view stats for test container  
\# st -v -A [http://192.168.0.10:8080/auth/v1.0][http_192.168.0.10_8080_auth_v1.0] -U swiftops:swiftops -K swiftops stat test  
\----  
  Account: AUTH\_38d1a353-377a-480c-9188-d703e6e20dcd  
Container: test  
  Objects: 1  
    Bytes: 8988  
 Read ACL: .r:\*  
Write ACL:  
Meta Web-Listings: true  
\---

\#\# let's view stats for account  
\# st -v -A [http://192.168.0.10:8080/auth/v1.0][http_192.168.0.10_8080_auth_v1.0] -U swiftops:swiftops -K swiftops stat  
\----  
StorageURL: [http://192.168.0.10:8080/v1/AUTH\_38d1a353-377a-480c-9188-d703e6e20dcd][http_192.168.0.10_8080_v1_AUTH_38d1a353-377a-480c-9188-d703e6e20dcd]  
Auth Token: AUTH\_tk50297fbd597444a787e72baecc16e5db  
   Account: AUTH\_38d1a353-377a-480c-9188-d703e6e20dcd  
Containers: 2  
   Objects: 4  
     Bytes: 74809

要能够出现列表，还需要配置staticweb。

修改/etc/swift/proxy-server.conf。

里面增加

# Note: Put staticweb just after your auth filter(s) in the pipeline
     
      
     
      
      
       [filter:staticweb]
     
      
     
      
      
       use = egg:swift#staticweb
     
      
     
      
      
       # Seconds to cache container x-container-meta-web-* header values.
     
      
     
      
      
       # cache_timeout = 300
     
      
     
      
      
       # You can override the default log routing for this filter here:
     
      
     
      
      
       # set log_name = staticweb
     
      
     
      
      
       # set log_facility = LOG_LOCAL0
     
      
     
      
      
       # set log_level = INFO
     
      
     
      
      
       # set access_log_name = staticweb
     
      
     
      
      
       # set access_log_facility = LOG_LOCAL0
     
      
     
      
      
       # set access_log_level = INFO
     
      
     
      
      
       # set log_headers = False

[http_192.168.0.10_8080_auth_v1.0]: http://192.168.0.10:8080/auth/v1.0
[http_192.168.0.10_8080_v1_AUTH_38d1a353-377a-480c-9188-d703e6e20dcd]: http://192.168.0.10:8080/v1/AUTH_38d1a353-377a-480c-9188-d703e6e20dcd