easyx基本使用＜二＞

秒速五厘米 2024-03-16 18:16 49阅读 0赞

#### easyx基本使用 ####

*  一.剪切区域
 *   *  1.单个剪切
     *  2.组合区域
 *  二.绘制卡通熊
 *  三.弹球小游戏
 *  四.贪吃蛇

## 一.剪切区域 ##

### 1.单个剪切 ###

![在这里插入图片描述][8fb205d01ba146869917b47caa6ac028.png]

![在这里插入图片描述][194de98439b041a982cc1b2d7bea9198.png]

![在这里插入图片描述][bab8ec4d2c14445d8859ea725e25fbdd.png]  
![在这里插入图片描述][31055eb169bf42bfbaf435f812b1ef48.png]

### 2.组合区域 ###

![在这里插入图片描述][0f8ff8b9bff547f1b8e5424dbc198190.png]

![在这里插入图片描述][23ac65fa24914d93acabee7a46d46456.png]

## 二.绘制卡通熊 ##

#include<stdio.h>
    #include<easyx.h>
    
    
    int main()
    {
        
    
    	initgraph(800, 600);//创建窗口
    	setbkcolor(RGB(162, 92, 10));//设置棕色
    	cleardevice();//涂满背景
    
    
    	//耳朵的阴影部分
    	setfillcolor(RGB(130,69,4));//设置颜色
    	solidcircle(200, 130, 90);
    	solidcircle(600, 130, 90);//两个圆形
    
    	//耳朵部分
    	//与阴影部分重合，留下下面一个类似半月牙型的阴影
    	setfillcolor(RGB(255,178,50));
    	solidcircle(200,120,90);
    	solidcircle(600,120,90);
    
    	//耳朵高光
    	//由于耳朵的阴影，本体，高光的圆形都是一样大的
    	//为了避免高光部分遮住阴影部分，需要对高光部分进行剪切
    	HRGN leftEarClip =CreateEllipticRgn(110, 30, 290, 210); 
    	HRGN rightEarClip =CreateEllipticRgn(510, 30, 690, 210);//创建两个圆形区域
    	HRGN earsClip =CreateRectRgn(0, 0, 0, 0);//创建一个空目标
    	CombineRgn(earsClip, leftEarClip, rightEarClip, RGN_OR);//使用并集组合区域
    	setcliprgn(earsClip);//设置剪切区域
    
    	setfillcolor(RGB(243,154,2));
    	solidcircle(200,130,90); 
    	solidcircle(600,130,90);//绘制圆形高光
    
    	//耳朵里面
    	//由于上面已经设置了剪切区域，所以不用担心会绘制到外面
    	setfillcolor(RGB(255,178,50));
    	solidcircle(200,210,90);
    	solidcircle(600,210,90);
    
    	//释放剪切区域
    	DeleteObject(leftEarClip);
    	DeleteObject(rightEarClip);
    	DeleteObject(earsClip);//释放前面的三个区域
    	setcliprgn(NULL);//将合并区域置空
    
    	//绘制头部
    	setfillcolor(RGB(255,178,50));
    	solidcircle(400,300,250);
    
    	//头顶高光
    	//由于绘制高光依然会超出头的位置，所以外面需要剪切
    	HRGN headClip = CreateEllipticRgn(150, 50, 650, 550); 
    	setcliprgn(headClip);//设置剪切区域
    
    	setfillcolor(RGB(243,154, 2)); 
    	solidcircle(400, 320, 250);//绘制高光
    
    	DeleteObject(headClip);
    	setcliprgn(NULL);//释放剪切区域
    
    	//眼睛
    	setfillcolor(RGB(51,34,8));
    	solidcircle(275,300,25);
    	solidcircle(525,300,25);
    
    	//嘴部
    	//有两个椭圆组成
    	//棕色椭圆作为下部阴影
    	setfillcolor(RGB(130,69,4));
    	solidellipse(310,385,490,485);
    
    	setfillcolor(WHITE);
    	solidellipse(310,380,490,480);
    
    	//鼻子
    	setfillcolor(RGB(51,34,8));
    	solidcircle(400,420,15);
    
    	//胡须
    	//两条线段
    	setlinestyle(PS_SOLID, 5); //样式
    	setlinecolor(RGB(51,34,8)); //颜色
    	line(400,420, 370, 450); 
    	line(400,420,430,450);//线段
    
    	getchar();
    	closegraph();
    	return 0;
    }

![在这里插入图片描述][5ef45d37f4014499b282d603a9510d6f.png]

## 三.弹球小游戏 ##

> **ps:在win11里进行键盘交互时可能会出现控制台窗口在前按键盘才有反应，此时需要在命令框上点出属性，其中有一个下拉选项是:让windows决定。把这个选项改为控制台。**

#include<stdio.h>
    #include<easyx.h>
    #include<conio.h>
    #include <graphics.h>
    
    int main()
    {
        
    	//创建窗口
    	initgraph(800,600);
    	setorigin(400,300);
    	setaspectratio(1, -1);
    	setbkcolor(RGB(164,225,202));
    	cleardevice();
    
    	//小球移动
    	int x = 0, y = 0;//圆心坐标
    	int vx = 5, vy = 5;//小球移动速度
    	int r = 40;//小球大小
    
    	//挡板参数
    	int barLeft, barTop, barRight, barBottom;
    	barLeft = -150;
    	barRight = 150;
    	barTop = -280;
    	barBottom = -300;
    
    	while (1)
    	{
        
    		cleardevice();
    		solidcircle(x,y,r);
    
    		solidrectangle(barLeft, barTop, barRight, barBottom);//每一帧中绘制挡板
    
    		//通过键盘对挡板进行交互
    		if (_kbhit() != 0)//是否按下键盘
    		{
        
    			char c = _getch();//从键盘里获取字符
    			if (c == 'a')
    			{
        
    				if (barLeft > -400)
    				{
        
    					barLeft -= 20;
    					barRight -= 20;
    				}
    			}
    			else if (c == 'd')
    			{
        
    				if (barRight < 400)
    				{
        
    					barLeft += 20;
    					barRight += 20;
    				}
    			}
    		}
    
    
    		Sleep(40);//每绘制一帧暂停40毫秒
    
    		//碰到边缘反弹
    		if (y >= 300-r)
    			vy = -vy;
    		if (x <= -400+r || x >= 400-r)
    			vx = -vx;
    		if (barLeft <= x && x <= barRight && y <= barTop + r)//撞击挡板
    			vy = -vy;
    		x += vx;
    		y += vy;
    
    		if (y <= -300)//游戏结束，复位
    		{
        
    			x = 0, y = 0;
    			vx = 5, vy = 5;
    			barLeft = -150;
    			barRight =150 ;
    			barBottom = -280;
    			barTop = -300;
    		}
    
    	}
    
    
    	getchar();
    	closegraph();
    	return 0;
    }

![在这里插入图片描述][1b98cf67a6854a87ba0db3f3b7e49273.png]

## 四.贪吃蛇 ##

#include<stdio.h>
    #include<easyx.h>
    #include<Windows.h>
    #include<conio.h>
    #include<stdbool.h>
    #include<time.h>
    #define NODE_WIDTH 40 //每个网格的宽度
    
    //4个方向
    enum direction
    {
        
    	eUp,
    	eDown,
    	eLeft,
    	eRight
    };
    
    
    //每个网格的坐标
    typedef struct {
        
    	int x;
    	int y;
    }node;
    
    //绘制网格
    void paintGrid()
    {
        
    	for (int x = 0; x <= 800; x += NODE_WIDTH)
    	{
        
    		line(x, 0, x, 600);//纵向线段
    	}
    	for (int y = 0; y <= 600; y += NODE_WIDTH)
    	{
        
    		line(0, y, 800, y);//横向线段
    	}
    }
    
    //绘制蛇
    void paintSnake(node*snake,int n)
    {
        
    	int left, top, right, bottom; 
    	for (int i = 0; i < n; i++) 
    	{
        
    		left = snake[i].x * NODE_WIDTH;
    		top = snake[i].y * NODE_WIDTH;
    		right = (snake[i].x + 1) * NODE_WIDTH; 
    		bottom = (snake[i].y + 1) * NODE_WIDTH; 
    		solidrectangle(left, top, right, bottom);
    	}
    }
    
    //移动
    node snakeMove(node* snake, int length, int direction)
    {
        
    	node tail = snake[length - 1];//记录尾节点方便之后吃食物长大
    
    	for (int i = length - 1; i> 0; i--)//将前一个节点覆盖后一个节点
    	{
        
    		snake[i] = snake[i - 1];
    	}
    	node newHead;
    	newHead=snake[0];//储存新的节点
    	//新节点方向
    	if (direction == eUp)
    	{
        
    		newHead.y--;
    	}
    	else if (direction == eDown)
    	{
        
    		newHead.y++;
    	}
    	else if (direction == eLeft)
    	{
        
    		newHead.x--;
    	}
    	else
    	{
        
    		newHead.x++;
    	}
    	snake[0] = newHead;//更新头节点
    
    	return tail;//为吃掉食物长大做准备
    }
    
    
    //更改蛇移动方向
    void changeDrection(enum direction*pD)
    {
        
    	if (_kbhit() != 0)
    	{
        
    		char c = _getch();
    		switch(c)
    		{
        
    		case 'w':
    			if(*pD!=eDown)
    				*pD = eUp;
    			break;
    		case 's':
    			if(*pD!=eUp)
    				*pD = eDown;
    			break;
    		case 'a':
    			if(*pD!=eRight)
    				*pD = eLeft;
    			break;
    		case 'd':
    			if(*pD!=eLeft)
    				*pD = eRight;
    			break;
    		}
    	}
    }
    
    //随机生成食物
    node creatFood(node* snake, int length)
    {
        
    	node food;
    	while (1)
    	{
        
    		//首先随机创建食物
    		food.x = rand() % (800 / NODE_WIDTH);
    		food.y = rand() % (600 / NODE_WIDTH);
    
    		//判断生成的食物是否与蛇重叠
    		int i;
    		for(i=0;i<length;i++)
    		{
        
    			if (snake[i].x == food.x && snake[i].y == food.y)
    			{
        
    				break;
    			}
    		}
    		if (i < length)//如果重叠就再重新生成
    			continue;
    		else
    			break;
    	}
    	return food;
    }
    
    //绘制食物
    void paintFood(node food)
    {
        
    	int left, top, right,bottom;
    	left = food.x * NODE_WIDTH; 
    	top = food.y * NODE_WIDTH;
    	right = (food.x + 1) * NODE_WIDTH;
    	bottom = (food.y + 1) * NODE_WIDTH; 
    	setfillcolor(YELLOW);
    	solidrectangle(left, top, right, bottom);
    	setfillcolor(WHITE);
    }
    
    
    bool isGameOver(node* snake, int length)
    {
        
    	//撞墙
    	if (snake[0].x < 0 || snake[0].x>800 / NODE_WIDTH)
    		return true;
    	if (snake[0].y < 0 || snake[0].y>600 / NODE_WIDTH)
    		return true;
    	//吃到自身
    	for (int i = 1; i < length; i++)
    	{
        
    		if (snake[0].x == snake[i].x && snake[0].y == snake[i].y)
    			return true;
    	}
    	return false;
    }
    
    int main()
    {
        
    	//创建控制台
    	initgraph(800,600);
    	setbkcolor(RGB(164,225,202));
    	cleardevice();
    
    	//制定网格
    	paintGrid();
    	
    	//绘制蛇的节点
    	node snake[100] = {
         {
        5,7},{
        4,7},{
        3,7},{
        2,7},{
        1,7} };//初始节点
    	int length = 5;//蛇的长度
    
    	enum direction d = eRight;//设置初始方向
    
    	//第一次生成食物
    	srand(unsigned int(time(NULL)));
    	node food = creatFood(snake,length);
    
    	//移动蛇节点
    	while (1)
    	{
        
    		cleardevice();//清空窗体
    		paintGrid();//绘制网格
    		paintSnake(snake, length);//绘制蛇节点
    		paintFood(food);//绘制食物
    		Sleep(500);
    
    		changeDrection(&d);//改变方向
    		node lastTail=snakeMove(snake, length, d);//移动蛇
    		//判断是否吃到食物
    		if (snake[0].x == food.x && snake[0].y == food.y)
    		{
        
    			if (length < 100)//我们规定蛇最长99
    			{
        
    				snake[length] = lastTail;
    				length++;//蛇长长
    			}
    			food = creatFood(snake, length);//创建新的食物
    		}
    
    		//游戏是否结束
    		if (isGameOver(snake,length))
    			break;
    	}
    	
    	printf("游戏结束");
    	closegraph();
    	return 0;
    }

![在这里插入图片描述][6a224697f0c84215a859ca9f8bec56be.png]

[8fb205d01ba146869917b47caa6ac028.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/15/04e5fc8176e146e686406ad79eea9f7b.png
[194de98439b041a982cc1b2d7bea9198.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/15/df38d9d2baf144f3a52364a093ec3726.png
[bab8ec4d2c14445d8859ea725e25fbdd.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/15/88158575e9c0498e8aee36d3a19bdc2e.png
[31055eb169bf42bfbaf435f812b1ef48.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/15/3e9bb92e34b9440dbe7ee45874099010.png
[0f8ff8b9bff547f1b8e5424dbc198190.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/15/5542d6d4695547ec9e9aae98021fa1fb.png
[23ac65fa24914d93acabee7a46d46456.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/15/815fc7eed992449bb920adc1b117baa3.png
[5ef45d37f4014499b282d603a9510d6f.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/15/acf08dc572034717a0bd50e13d73ab15.png
[1b98cf67a6854a87ba0db3f3b7e49273.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/15/64b7cd6be68f45f2aacccb902f4e86d7.png
[6a224697f0c84215a859ca9f8bec56be.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/03/15/1d1d717e826847b58a31602b666deaa7.png