centos挂载硬盘(centos挂载硬盘启动时自动挂载)

╰半夏微凉° 2023-09-26 13:45 184阅读 0赞

## centos怎么挂载2t以上硬盘 ##

使用gpt分区就可以支持2T以上的硬盘看到了你的提问...其实我还没遇到这种情况...所以回不了...

你可以考虑上linuxquestions.org这个网站去提问...

![centos挂载硬盘][centos]

## linux下如何挂载硬盘？ ##

1.插入新硬盘，启动Linux服务器，使用fdisk -l 查看硬盘

\#fdisk -l

Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes

2.格式化硬盘

\#mkfs -t ext4 /dev/sdb

3.挂载硬盘

\#mount 硬盘地址 要挂载的地址

\#mount /dev/sdb /media/imgs

4.实现系统重启后自动挂载该分区

\#vi /etc/fstab

在最后一行添加

/dev/sdb /media/imgs ext4 defaults 1 2

一、添加磁盘

添加加新硬盘重启服务器

添加完之后就可以重启机器了，如果你机器是开启的，进入系统并不能看见你刚添加的那块磁盘，只有等系统重启，重新加载之后才会显示安装的那块磁盘

二、进入系统

使用root用户进入系统

三、 查看硬盘信息

\[root@localhost ~\]\# fdisk -l//磁盘命令

Disk /dev/sda: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x000c4cb5

Device BootStartEndBlocksId System

/dev/sda1\*16451200083 Linux

Partition 1 does not end on cylinder boundary.

/dev/sda2642611204584968e Linux LVM

Disk /dev/sdb: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0xd0f5c869

Device BootStartEndBlocksId System

/dev/sdb11261020964793+ 83 Linux

Disk /dev/sdc: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x00000000

可以看到这台机器加载了三个磁盘sda、sdb、sdc

其中sda是初始磁盘，sdb已经初始化且经过使用，sdc是刚刚加载的，未格式化的新磁盘

四、创建新硬盘分区

\[root@localhost ~\]\# fdisk /dev/sdc \#进入磁盘

Device contains neither a valid DOS partition table, nor Sun, SGI or OSF disklabel

Building a new DOS disklabel with disk identifier 0x45a3cadb.

Changes will remain in memory only, until you decide to write them.

After that, of course, the previous content won't be recoverable.

Warning: invalid flag 0x0000 of partition table 4 will be corrected by w(rite)

WARNING: DOS-compatible mode is deprecated. It's strongly recommended to

switch off the mode (command 'c') and change display units to

sectors (command 'u').

Command (m for help): m

Command action

atoggle a bootable flag\#设定可启动标记

bedit bsd disklabel

ctoggle the dos compatibility flag

ddelete a partition\#删除一个分区

llist known partition types \#各分区类型所对应的ID

mprint this menu\#菜单

nadd a new partition\#添加一个分区

ocreate a new empty DOS partition table

pprint the partition table\#显示该磁盘下的当前分区信息

qquit without saving changes \#不保存退出

screate a new empty Sun disklabel

tchange a partition's system id

uchange display/entry units

vverify the partition table

wwrite table to disk and exit \#保存退出

xextra functionality (experts only)

知道命令之后就可以进行分区了

Command (m for help): p //打印分区信息,可以看到当前并没有分区

Disk /dev/sdc: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x45a3cadb

Device BootStartEndBlocksId System

Command (m for help): n //创建一个新的分区

Command action

eextended//输入e为创建扩展分区

pprimary partition (1-4) //输入p为创建逻辑分区

Partition number (1-4): 1//划分逻辑分区

First cylinder (1-2610, default 1): //我这里直接回车,是不想把该磁盘分成多个分区,把整个磁盘作为1个分区

Using default value 1

Last cylinder, +cylinders or +size\{K,M,G\} (1-2610, default 2610):

Using default value 2610

Command (m for help): p //再次查看可以看到该磁盘已经有1个分区了

Disk /dev/sdc: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x45a3cadb

Device BootStartEndBlocksId System

/dev/sdc11261020964793+ 83 Linux

Command (m for help): w //保存分区

The partition table has been altered!

Calling ioctl() to re-read partition table.

Syncing disks.

再次使用”fdisk -l”命令查看磁盘信息

Disk /dev/sdc: 21.5 GB, 21474836480 bytes

255 heads, 63 sectors/track, 2610 cylinders

Units = cylinders of 16065 \* 512 = 8225280 bytes

Sector size (logical/physical): 512 bytes / 512 bytes

I/O size (minimum/optimal): 512 bytes / 512 bytes

Disk identifier: 0x406a4c58

Device BootStartEndBlocksId System

/dev/sdc11261020964793+ 83 Linux

第三块磁盘/dev/sdc已经分区好了

五、格式化分区

\[root@localhost ~\]\# mkfs.ext3 /dev/sdc1

//将/dev/sdc1格式化为ext3类型,好像大部分的磁盘都是格式化为ext3类型,具体为什么没有深入研究,暂时不清楚,想了解的朋友可以自己查一下

\[root@localhost ~\]\# mkfs.ext3 /dev/sdc1

mke2fs 1.41.12 (17-May-2010)

文件系统标签=

操作系统:Linux

块大小=4096 (log=2)

分块大小=4096 (log=2)

Stride=0 blocks, Stripe width=0 blocks

1310720 inodes, 5241198 blocks

262059 blocks (5.00%) reserved for the super user

第一个数据块=0

Maximum filesystem blocks=4294967296

160 block groups

32768 blocks per group, 32768 fragments per group

8192 inodes per group

Superblock backups stored on blocks:

32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,

4096000

正在写入inode表: 完成

Creating journal (32768 blocks): 完成

Writing superblocks and filesystem accounting information: 完成

This filesystem will be automatically checked every 31 mounts or

180 days, whichever comes first. Use tune2fs -c or -i to override.

格式化完毕，此时就可以使用“mount”命令挂载分区了，然后使用这个磁盘空间了

六、挂载分区以及开机自动挂载

\[root@localhost ~\]\# df -h //此时只有sda1和sdb1两个磁盘挂载

FilesystemSize Used Avail Use% Mounted on

/dev/mapper/VolGroup-lv\_root18G15G 1.5G 92% /

tmpfs932M76K 932M1% /dev/shm

/dev/sda1485M40M 421M9% /boot

/dev/sdb120G 1.2G18G7% /disk/diskone

/dev/sr04.2G 4.2G0 100% /media/CentOS\_6.5\_Final

\[root@localhost /\]\# cd /disk/

\[root@localhost disk\]\# ll

总用量 4

drwxr-xr-x. 4 root root 4096 7月 28 17:04 diskone

\[root@localhost disk\]\# cd diskone/

\[root@localhost diskone\]\# ll

总用量 20

drwx------. 2 root root 16384 7月 28 16:12 lost+found

drwxr-xr-x. 2 root root 4096 7月 28 17:09 software

\[root@localhost diskone\]\# cd ../

\[root@localhost disk\]\# mkdir disktwo //创建被挂载的路径

\[root@localhost disk\]\# ll

总用量 8

drwxr-xr-x. 4 root root 4096 7月 28 17:04 diskone

drwxr-xr-x. 2 root root 4096 8月1 16:48 disktwo

\[root@localhost disk\]\# mount /dev/sdc1 /disk/disktwo/ //进行挂载

\[root@localhost disk\]\# df -h //再次查看,发现sdc1已经挂载在/disk/disktwo路径下

FilesystemSize Used Avail Use% Mounted on

/dev/mapper/VolGroup-lv\_root18G15G 1.5G 92% /

tmpfs932M76K 932M1% /dev/shm

/dev/sda1485M40M 421M9% /boot

/dev/sdb120G 1.2G18G7% /disk/diskone

/dev/sr04.2G 4.2G0 100% /media/CentOS\_6.5\_Final

/dev/sdc120G 173M19G1% /disk/disktwo前提是在mnt目录下，建立了f,d,u三个目录，还有就是sda，hda之分即串并口硬盘区别 \[root@localhost yan\]\# vi /etc/fstab label=/ / ext3 defaults 1 1 tmpfs /dev/shm tmpfs defaults 0 0 devpts /dev/pts devpts gid=5,mode=620 0 0 sysfs /sys sysfs defaults 0 0 proc /proc proc defaults 0 0 /dev/sda7 /mnt/f vfat codepage=936,iocharset=cp936 0 0 /dev/sda5 /mnt/d vfat codepage=936,iocharset=cp936 0 0 /dev/sdb1 /mnt/u vfat codepage=936,iocharset=cp936 0 0 label=swap-sda8 swap swap defaults 0 0 要运行执行命令 \#mount -a ok,搞定。

[centos]: https://img1.baidu.com/it/u=3410730067,1109653349&fm=26&fmt=auto