LVS实现--LVS/Tun模式实现

朱雀 2023-07-07 05:59 5阅读 0赞

LVS/Tun原理和特点 ：[https://blog.csdn.net/qq\_35887546/article/details/104425264][https_blog.csdn.net_qq_35887546_article_details_104425264]

本次实验需要三个虚拟机以及物理机：

<table> 
 <thead> 
  <tr> 
   <th>虚拟机名称</th> 
   <th>作用</th> 
   <th>IP</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td>server1</td> 
   <td>DS</td> 
   <td>172.25.63.1</td> 
  </tr> 
  <tr> 
   <td>server2</td> 
   <td>RS1</td> 
   <td>172.25.63.2</td> 
  </tr> 
  <tr> 
   <td>server3</td> 
   <td>RS2</td> 
   <td>172.25.63.3</td> 
  </tr> 
 </tbody> 
</table>

VIP为：`172.25.63.100`  
测试服务：Http 端口：80  
物理机为客户端

server2与server3安装apache，在默认发布目录/var/www/html下编写发布文件

实验前使用清空server1 之前的规则：

[root@server1 ~]# ipvsadm -C
    [root@server1 ~]# ipvsadm -l
    IP Virtual Server version 1.2.1 (size=4096)
    Prot LocalAddress:Port Scheduler Flags
      -> RemoteAddress:Port           Forward Weight ActiveConn InActConn

**1.开启隧道模型**  
在server1：

[root@server1 ~]# modprobe ipip
    [root@server1 ~]# ip addr show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
        link/ether 52:54:00:1b:f6:56 brd ff:ff:ff:ff:ff:ff
        inet 172.25.63.1/24 brd 172.25.63.255 scope global eth0
           valid_lft forever preferred_lft forever
        inet 172.25.63.100/32 scope global eth0
           valid_lft forever preferred_lft forever
        inet6 fe80::5054:ff:fe1b:f656/64 scope link 
           valid_lft forever preferred_lft forever
    3: tunl0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN qlen 1					#多了隧道的模型
        link/ipip 0.0.0.0 brd 0.0.0.0

**2.为ip 隧道添加VIP**

在server1：

[root@server1 ~]# ip addr del 172.25.63.100/32 dev eth0					#先将VIP从eth0上删除
    [root@server1 ~]# ip addr add 172.25.63.100/32 dev tunl0

**3.添加ipvs规则**  
在server1：

[root@server1 ~]# ipvsadm -A -t 172.25.63.100:80 -s rr
    [root@server1 ~]# ipvsadm -a -t 172.25.63.100:80 -r 172.25.63.2:80 -i			# -i表示隧道模式
    [root@server1 ~]# ipvsadm -a -t 172.25.63.100:80 -r 172.25.63.3:80 -i
    [root@server1 ~]# ipvsadm -l
    IP Virtual Server version 1.2.1 (size=4096)
    Prot LocalAddress:Port Scheduler Flags
      -> RemoteAddress:Port           Forward Weight ActiveConn InActConn
    TCP  server1:http rr
      -> server2:http                 Tunnel  1      0          0         
      -> server3:http                 Tunnel  1      0          0         
    [root@server1 ~]# ip link set up tunl0				#激活隧道模式

**4.配置RS**

在server2 和server3 上进行相同的操作：

modprobe ipip
    ip addr del 172.25.63.100/32 dev eth0
    ip addr add 172.25.63.100/32 dev tunl0
    ip link set up tunl0

在server2 和server3 内核上关闭反向过滤规则（以server2为例）：

[root@server2 html]# sysctl -a | grep rp_filter			#，查看反向过滤规则，将选项为 1 的全部改为 0
    net.ipv4.conf.all.arp_filter = 0
    net.ipv4.conf.all.rp_filter = 1
    net.ipv4.conf.default.arp_filter = 0
    net.ipv4.conf.default.rp_filter = 1
    net.ipv4.conf.eth0.arp_filter = 0
    net.ipv4.conf.eth0.rp_filter = 1
    net.ipv4.conf.lo.arp_filter = 0
    net.ipv4.conf.lo.rp_filter = 0
    net.ipv4.conf.tunl0.arp_filter = 0
    net.ipv4.conf.tunl0.rp_filter = 1
    [root@server2 html]# sysctl -w net.ipv4.conf.all.rp_filter=0
    net.ipv4.conf.all.rp_filter = 0
    [root@server2 html]# sysctl -w net.ipv4.conf.default.rp_filter=0
    net.ipv4.conf.default.rp_filter = 0
    [root@server2 html]# sysctl -w net.ipv4.conf.eth0.rp_filter=0
    net.ipv4.conf.eth0.rp_filter = 0
    [root@server2 html]# sysctl -w net.ipv4.conf.tunl0.rp_filter=0
    net.ipv4.conf.tunl0.rp_filter = 0
    [root@server2 html]# sysctl -a | grep rp_filter				#选项全部为0，设置成功
    net.ipv4.conf.all.arp_filter = 0
    net.ipv4.conf.all.rp_filter = 0
    net.ipv4.conf.default.arp_filter = 0
    net.ipv4.conf.default.rp_filter = 0
    net.ipv4.conf.eth0.arp_filter = 0
    net.ipv4.conf.eth0.rp_filter = 0
    net.ipv4.conf.lo.arp_filter = 0
    net.ipv4.conf.lo.rp_filter = 0
    net.ipv4.conf.tunl0.arp_filter = 0
    net.ipv4.conf.tunl0.rp_filter = 0
    
    [root@server2 html]# sysctl -p				#使所有选项生效

**注意**在server3 上也要进行以上的相同操作

**5.测试**

在客户端：

[kiosk@foundation63 ~]$ curl 172.25.63.100
    server3
    [kiosk@foundation63 ~]$ curl 172.25.63.100
    server2
    [kiosk@foundation63 ~]$ curl 172.25.63.100
    server3
    [kiosk@foundation63 ~]$ curl 172.25.63.100
    server2

表示Tun模式成功实现

[https_blog.csdn.net_qq_35887546_article_details_104425264]: https://blog.csdn.net/qq_35887546/article/details/104425264