Etcd 和 kubernetes master的灾备与恢复

系统管理员 2023-06-26 12:21 7阅读 0赞

# Etcd和kubernetes master的灾备与恢复 #

## 背景说明 ##

问题：假设某台带有etcd的k8s master节点完全故障，彻底无法恢复

方案：新启动一台主机，配置为故障master主机相同的ip和主机名，并尝试原地恢复，顶替原故障master节点

## Etcd恢复 ##

#### 参考官方文档： ####

https://github.com/etcd-io/etcd/blob/master/Documentation/op-guide/recovery.md\#restoring-a-cluster

**注意**：从官方文档可得知，备份快照时会改变cluster id(改变cluster id不影响客户端，客户端是使用ip来连接访问的)，因此，需要etcd cluster的**每个成员**都参与备份与恢复。

#### 检查 ####

~# export ENDPOINTS="https://10.90.1.238:2379,https://10.90.1.239:2379,https://10.90.1.240:2379"
    
    ~# etcdctl --endpoints=$ENDPOINTS --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem --cacert=/etc/etcd/ssl/ca.pem member list
    316dbd21b17d1b4f, started, NODE238, https://10.90.1.238:2380, https://10.90.1.238:2379, false
    8a206cf1ed53b6f4, started, NODE240, https://10.90.1.240:2380, https://10.90.1.240:2379, false
    e444265665d3bd32, started, NODE239, https://10.90.1.239:2380, https://10.90.1.239:2379, false
    
    ~# etcdctl endpoint health --endpoints=$ENDPOINTS --cacert=/etc/etcd/ssl/ca.pem --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem
    https://10.90.1.239:2379 is healthy: successfully committed proposal: took = 16.882627ms
    https://10.90.1.240:2379 is healthy: successfully committed proposal: took = 17.046735ms
    https://10.90.1.238:2379 is healthy: successfully committed proposal: took = 19.395533ms
    
    ~ # kubectl get nodes
    NAME        STATUS   ROLES    AGE    VERSION
    ubuntu238   Ready    master   123d   v1.15.3
    ubuntu239   Ready    master   123d   v1.15.3
    ubuntu240   Ready    master   123d   v1.15.3

确认正常无误

### 开始备份 ###

#### 关停客户端 ####

# 3台分别执行,二进制安装的关停相应组件服务
    service kubelet stop
    service docker stop

#### 备份快照 ####

在每一台etcd节点上分别执行：

# 修改为对应节点的ip
    export EP="https://10.90.1.238:2379"
    
    export ETCDCTL_API=3
    
    mkdir -p /var/lib/etcd_bak
    
    etcdctl --endpoints=$EP --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem --cacert=/etc/etcd/ssl/ca.pem   snapshot save  /var/lib/etcd_bak/`hostname`-etcd_`date +%Y%m%d%H%M`.db
    
    systemctl stop etcd
    
    mv /var/lib/etcd /var/lib/etcd_old

拷贝文件：

scp -r /etc/etcd/ssl/* NEW_HOST
    scp -r /etc/systemd/system/etcd.service  NEW_HOST
    scp  /var/lib/etcd_bak/ubuntu238-etcd_202001011000.db  NEW_HOST

将备份出的快照文件、ssl认证文件、systemd启动脚本，拷贝到新主机上，同时，在新主机上安装好docker、kubelet、kubectl、etcd服务，安装步骤这里省略，由于这几个组件都是go语言的二进制程序，因此可以直接将原主机的执行文件scp到新主机上相同路径中，不必花费精力去找相应版本的rpm包。

### 恢复备份 ###

在新加入的一台替换主机，和保持不变的另外2台主机上执行：

**必须每台成员主机全部执行，因为etcd协商的cluster id等一些元数据发生了改变**

# 这3个环境变量相应修改
    export NODE_NAME=NODE238
    export NODE_IP=10.90.1.238
    export SNAPSHOT=ubuntu238-etcd_202001011000.db
    
    export ETCDCTL_API=3
    export ETCD_NODES="NODE238"=https://10.90.1.238:2380,"NODE239"=https://10.90.1.239:2380,"NODE240"=https://10.90.1.240:2380
    export ENDPOINTS="https://10.90.1.238:2379,https://10.90.1.239:2379,https://10.90.1.240:2379"
    
    cd /var/lib/etcd_bak/
    
    etcdctl snapshot restore  $SNAPSHOT \
    --name=$NODE_NAME \
    --cert=/etc/etcd/ssl/etcd.pem \
    --key=/etc/etcd/ssl/etcd-key.pem \
    --cacert=/etc/etcd/ssl/etcd-ca.pem \
    --initial-advertise-peer-urls=https://$NODE_IP:2380 \
    --initial-cluster-token=etcd-cluster-0 \
    --initial-cluster=$ETCD_NODES \
    --data-dir=/var/lib/etcd/

完成以上步骤后，3台etcd主机上一起启动etcd并检查状态：

~ # service etcd start
    ~ # etcdctl endpoint health --endpoints=$ENDPOINTS --cacert=/etc/etcd/ssl/ca.pem --cert=/etc/etcd/ssl/etcd.pem --key=/etc/etcd/ssl/etcd-key.pem
    https://10.90.1.240:2379 is healthy: successfully committed proposal: took = 16.112222ms
    https://10.90.1.238:2379 is healthy: successfully committed proposal: took = 16.126138ms
    https://10.90.1.239:2379 is healthy: successfully committed proposal: took = 17.345037ms

etcd恢复成功！

## K8s master恢复 ##

如果是原主机不动，则无需操作，如果是替换为新主机，则需要将如下文件拷贝至新主机上(适用于kubeadm安装的k8s,二进制需要对应修改)：

*  /etc/kubernetes/目录下的所有文件(证书，manifest文件)
 *  用户(root)主目录下 /root/.kube/config文件(kubectl连接认证)
 *  /var/lib/kubelet/目录下所有文件(plugins、容器连接认证)
 *  /etc/systemd/system/kubelet.service.d/10-kubeadm.conf(kubelet systemd 启动文件)

复制完成后，启动服务:

service docker start
    service kubelet start

检查：

kubectl get nodes
    NAME        STATUS   ROLES    AGE    VERSION
    ubuntu238   Ready    master   123d   v1.15.3
    ubuntu239   Ready    master   123d   v1.15.3
    ubuntu240   Ready    master   123d   v1.15.3

不出意外的话，一分钟左右master就恢复了。

## 总结 ##

master恢复还是很简单的，没什么好多说的，etcd的恢复比较麻烦一些，需要全部成员重新initial一次，一定要按步骤来，仔细一些不要错。

**提示**：操作需要中断客户端写入，即停止k8s服务，风险高，生产慎用！