linux拒接链接secureCRT ----解决方案二

墨蓝 2023-06-15 09:45 1阅读 0赞

![20191121110222704.png][]

原因：继上面的问题，再一次出错，这回是因为ip冲突了

### 解决方案： ###

1.首先在虚拟机ping一下外网，

ping 192.168.0.129

PING 192.168.0.129 (192.168.0.129) 56(84) bytes of data.
    64 bytes from 192.168.0.129: icmp_seq=1 ttl=64 time=0.017 ms
    64 bytes from 192.168.0.129: icmp_seq=2 ttl=64 time=0.035 ms
    64 bytes from 192.168.0.129: icmp_seq=3 ttl=64 time=0.091 ms
    64 bytes from 192.168.0.129: icmp_seq=4 ttl=64 time=0.099 ms
    64 bytes from 192.168.0.129: icmp_seq=5 ttl=64 time=0.081 ms
    64 bytes from 192.168.0.129: icmp_seq=6 ttl=64 time=9.18 ms
    64 bytes from 192.168.0.129: icmp_seq=7 ttl=64 time=0.083 ms
    64 bytes from 192.168.0.129: icmp_seq=8 ttl=64 time=0.050 ms
    64 bytes from 192.168.0.129: icmp_seq=9 ttl=64 time=0.031 ms
    ^C
    --- 192.168.0.129 ping statistics ---
    9 packets transmitted, 9 received, 0% packet loss, time 8004ms
    rtt min/avg/max/mdev = 0.017/1.074/9.184/2.867 ms

2.可以ping通之后，

[root@hdp-2 ~]# ifconfig
    ens33: flags=4163<UP,BROADCAST,RUNNING,MULTICAST>  mtu 1500
            inet 192.168.0.129  netmask 255.255.255.0  broadcast 192.168.0.255
            inet6 fe80::20c:29ff:feb2:9764  prefixlen 64  scopeid 0x20<link>
            ether 00:0c:29:b2:97:64  txqueuelen 1000  (Ethernet)
            RX packets 422  bytes 38207 (37.3 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 244  bytes 24279 (23.7 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0
    
    lo: flags=73<UP,LOOPBACK,RUNNING>  mtu 65536
            inet 127.0.0.1  netmask 255.0.0.0
            inet6 ::1  prefixlen 128  scopeid 0x10<host>
            loop  txqueuelen 1000  (Local Loopback)
            RX packets 24  bytes 2016 (1.9 KiB)
            RX errors 0  dropped 0  overruns 0  frame 0
            TX packets 24  bytes 2016 (1.9 KiB)
            TX errors 0  dropped 0 overruns 0  carrier 0  collisions 0

3.控制面板---->网络和 Internet---->网络连接

点击你所用的网络，右击点属性，

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L0FCVV9NT2xJX0lUVUk_size_16_color_FFFFFF_t_70][]

4.再次启动CRT就可以连接了

[20191121110222704.png]: https://img-blog.csdnimg.cn/20191121110222704.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L0FCVV9NT2xJX0lUVUk_size_16_color_FFFFFF_t_70]: https://img-blog.csdnimg.cn/20191121163909332.png?x-oss-process=image/watermark,type_ZmFuZ3poZW5naGVpdGk,shadow_10,text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L0FCVV9NT2xJX0lUVUk=,size_16,color_FFFFFF,t_70