redis-5.0.5的内置集群部署

电玩女神 2023-06-09 14:22 2阅读 0赞

前面介绍过[redis4.0.11][]版本的内置集群部署，这里省略之前的操作，我们直接看创建集群的指令。

在redis4.x版本之前还需要安装ruby，yum安装的ruby版本都是2.0的，不符合要求，升级ruby还有点麻烦，并用redis-trib指令进行创建集群

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3d5bDk1Mjc_size_16_color_FFFFFF_t_70][]

redis5.0版本后，使用redis-cli 语法，避免了安装和升级ruby，操作简单。

配置文件:

bind 192.168.22.33
    protected-mode yes
    port 7000
    tcp-backlog 511
    timeout 0
    tcp-keepalive 300
    daemonize yes
    supervised no
    pidfile /opt/redis-5.0.5/pid/redis7000.pid
    loglevel notice
    logfile "/opt/redis-5.0.5/log/redis7000.log"
    databases 16
    always-show-logo yes
    save 900 1
    save 300 10
    save 60 10000
    stop-writes-on-bgsave-error yes
    rdbcompression yes
    rdbchecksum yes
    dbfilename dump7000.rdb
    dir /opt/redis-5.0.5/data
    replica-serve-stale-data yes
    replica-read-only yes
    repl-diskless-sync no
    repl-diskless-sync-delay 5
    repl-disable-tcp-nodelay no
    replica-priority 100
    maxclients 10000
    maxmemory 5gb
    maxmemory-policy volatile-lfu
    lazyfree-lazy-eviction no
    lazyfree-lazy-expire no
    lazyfree-lazy-server-del no
    replica-lazy-flush no
    appendonly no
    appendfilename "appendonly.aof"
    appendfsync everysec
    no-appendfsync-on-rewrite no
    auto-aof-rewrite-percentage 100
    auto-aof-rewrite-min-size 64mb
    aof-load-truncated yes
    aof-use-rdb-preamble yes
    lua-time-limit 5000
    cluster-enabled yes
    cluster-config-file nodes-7000.conf
    cluster-node-timeout 15000
    cluster-require-full-coverage no
    slowlog-log-slower-than 10000
    slowlog-max-len 128
    latency-monitor-threshold 0
    notify-keyspace-events ""
    hash-max-ziplist-entries 512
    hash-max-ziplist-value 64
    list-max-ziplist-size -2
    list-compress-depth 0
    set-max-intset-entries 512
    zset-max-ziplist-entries 128
    zset-max-ziplist-value 64
    hll-sparse-max-bytes 3000
    stream-node-max-bytes 4096
    stream-node-max-entries 100
    activerehashing yes
    client-output-buffer-limit normal 0 0 0
    client-output-buffer-limit replica 256mb 64mb 60
    client-output-buffer-limit pubsub 32mb 8mb 60
    hz 10
    dynamic-hz yes
    aof-rewrite-incremental-fsync yes
    rdb-save-incremental-fsync yes

复制为6份，并启动，启动成功如下所是：

[root@wyl redis-5.0.5]# ps -ef|grep redis
    root      60838      1  0 15:42 ?        00:00:00 ./bin/redis-server 192.168.22.33:7000 [cluster]
    root      64061      1  0 15:46 ?        00:00:00 ./bin/redis-server 192.168.22.33:7001 [cluster]
    root      64141      1  0 15:46 ?        00:00:00 ./bin/redis-server 192.168.22.33:7002 [cluster]
    root      64147      1  0 15:46 ?        00:00:00 ./bin/redis-server 192.168.22.33:7003 [cluster]
    root      64187      1  0 15:46 ?        00:00:00 ./bin/redis-server 192.168.22.33:7004 [cluster]
    root      64229      1  0 15:46 ?        00:00:00 ./bin/redis-server 192.168.22.33:7005 [cluster]

创建集群：

[root@wyl redis-5.0.5]# ./bin/redis-cli --cluster create 192.168.22.33:7000 192.168.22.33:7001 192.168.22.33:7002 192.168.22.33:7003 192.168.22.33:7004 192.168.22.33:7005 --cluster-replicas 1
    >>> Performing hash slots allocation on 6 nodes...
    Master[0] -> Slots 0 - 5460
    Master[1] -> Slots 5461 - 10922
    Master[2] -> Slots 10923 - 16383
    Adding replica 192.168.22.33:7004 to 192.168.22.33:7000
    Adding replica 192.168.22.33:7005 to 192.168.22.33:7001
    Adding replica 192.168.22.33:7003 to 192.168.22.33:7002
    >>> Trying to optimize slaves allocation for anti-affinity
    [WARNING] Some slaves are in the same host as their master
    M: 3d580f0ecc38145f93af7d910f6321b225b338af 192.168.22.33:7000
       slots:[0-5460] (5461 slots) master
    M: d960e8db22124b5759e2c693e6ba55238a051785 192.168.22.33:7001
       slots:[5461-10922] (5462 slots) master
    M: dd7fbb1956d23bc210ea61aa608b665b59c2cd1e 192.168.22.33:7002
       slots:[10923-16383] (5461 slots) master
    S: 63ab774ccbf7b7bdb58a314f0c013876cb4db899 192.168.22.33:7003
       replicates dd7fbb1956d23bc210ea61aa608b665b59c2cd1e
    S: 5ce084550353be2bd582a901156f3c79eac202df 192.168.22.33:7004
       replicates 3d580f0ecc38145f93af7d910f6321b225b338af
    S: 0f9ff62d9c90d36332552286f021dcfe09e4251b 192.168.22.33:7005
       replicates d960e8db22124b5759e2c693e6ba55238a051785
    Can I set the above configuration? (type 'yes' to accept): yes
    >>> Nodes configuration updated
    >>> Assign a different config epoch to each node
    >>> Sending CLUSTER MEET messages to join the cluster
    Waiting for the cluster to join
    ......
    >>> Performing Cluster Check (using node 192.168.22.33:7000)
    M: 3d580f0ecc38145f93af7d910f6321b225b338af 192.168.22.33:7000
       slots:[0-5460] (5461 slots) master
       1 additional replica(s)
    S: 0f9ff62d9c90d36332552286f021dcfe09e4251b 192.168.22.33:7005
       slots: (0 slots) slave
       replicates d960e8db22124b5759e2c693e6ba55238a051785
    S: 63ab774ccbf7b7bdb58a314f0c013876cb4db899 192.168.22.33:7003
       slots: (0 slots) slave
       replicates dd7fbb1956d23bc210ea61aa608b665b59c2cd1e
    M: dd7fbb1956d23bc210ea61aa608b665b59c2cd1e 192.168.22.33:7002
       slots:[10923-16383] (5461 slots) master
       1 additional replica(s)
    M: d960e8db22124b5759e2c693e6ba55238a051785 192.168.22.33:7001
       slots:[5461-10922] (5462 slots) master
       1 additional replica(s)
    S: 5ce084550353be2bd582a901156f3c79eac202df 192.168.22.33:7004
       slots: (0 slots) slave
       replicates 3d580f0ecc38145f93af7d910f6321b225b338af
    [OK] All nodes agree about slots configuration.
    >>> Check for open slots...
    >>> Check slots coverage...
    [OK] All 16384 slots covered.

集群扩容

添加主节点：

备注:192.168.22.33:7006 是新的主节点 , 192.168.22.33:7000 是原存在的任一主节点

./bin/redis-cli --cluster add-node 192.168.22.33:7006  192.168.22.33:7000

查看节点信息，7006节点还未分配槽位

./bin/redis-cli  -h 192.168.22.33 -p 7001 -c
    192.168.22.33:7001> CLUSTER nodes
    c1b945b0361046c9168875e4e1c1b496d9907516 192.168.22.33:7005@17005 slave 2d591abdfbc44a925e822825fda14fc6f60cc915 0 1571882461490 6 connected
    d4ce5c2d9e86161c3c9b2ddaccc32b37701e94fd 192.168.22.33:7001@17001 myself,master - 0 1571882458000 2 connected 5461-10922
    1f7234fc9dfe726d0af16fbd9b49c50b36f30803 192.168.22.33:7003@17003 slave 3b2314e226123b1ad7270b83579c6329b1b8689d 0 1571882460488 4 connected
    2d591abdfbc44a925e822825fda14fc6f60cc915 192.168.22.33:7002@17002 master - 0 1571882463494 3 connected 10923-16383
    ca1b2bdd68386b788caa70969e2542c0185d8fdb 192.168.22.33:7004@17004 slave d4ce5c2d9e86161c3c9b2ddaccc32b37701e94fd 0 1571882462000 5 connected
    c972acd3671fad44257b2c533085c9335a9ed1bc 192.168.22.33:7006@17006 master - 0 1571882461000 0 connected  
    3b2314e226123b1ad7270b83579c6329b1b8689d 192.168.22.33:7000@17000 master - 0 1571882462492 1 connected 0-5460

分配槽位

./bin/redis-cli --cluster reshard  192.168.22.33:7000
    M: 3b2314e226123b1ad7270b83579c6329b1b8689d 192.168.22.33:7000
       slots:[0-5460] (5461 slots) master
       1 additional replica(s)
    M: c972acd3671fad44257b2c533085c9335a9ed1bc 192.168.22.33:7006 (0 slots) master
    M: 2d591abdfbc44a925e822825fda14fc6f60cc915 192.168.22.33:7002
       slots:[10922-16383] (5461slots) master
       1 additional replica(s)
    S: ca1b2bdd68386b788caa70969e2542c0185d8fdb 192.168.22.33:7004
       slots: (0 slots) slave
       replicates d4ce5c2d9e86161c3c9b2ddaccc32b37701e94fd
    S: c1b945b0361046c9168875e4e1c1b496d9907516 192.168.22.33:7005
       slots: (0 slots) slave
       replicates 2d591abdfbc44a925e822825fda14fc6f60cc915
    M: d4ce5c2d9e86161c3c9b2ddaccc32b37701e94fd 192.168.22.33:7001
       slots:[5461-10922] (5461 slots) master
       1 additional replica(s)
    S: 1f7234fc9dfe726d0af16fbd9b49c50b36f30803 192.168.22.33:7003
       slots: (0 slots) slave
       replicates 3b2314e226123b1ad7270b83579c6329b1b8689d
    [OK] All nodes agree about slots configuration.
    >>> Check for open slots...
    >>> Check slots coverage...
    [OK] All 16384 slots covered.
    How many slots do you want to move (from 1 to 16384)? 4000
    What is the receiving node ID? c972acd3671fad44257b2c533085c9335a9ed1bc
    Please enter all the source node IDs.
      Type 'all' to use 
    
    all the nodes as source nodes for the hash slots.
      Type 'done' once you entered all the source nodes IDs.
    Source node #1: all
    Source node #2: done
    
    
    #查看节点信息
    192.168.22.33:7001> CLUSTER nodes
    c1b945b0361046c9168875e4e1c1b496d9907516 192.168.22.33:7005@17005 slave 2d591abdfbc44a925e822825fda14fc6f60cc915 0 1571882669000 6 connected
    d4ce5c2d9e86161c3c9b2ddaccc32b37701e94fd 192.168.22.33:7001@17001 myself,master - 0 1571882667000 2 connected 6795-10922
    1f7234fc9dfe726d0af16fbd9b49c50b36f30803 192.168.22.33:7003@17003 slave 3b2314e226123b1ad7270b83579c6329b1b8689d 0 1571882664000 4 connected
    2d591abdfbc44a925e822825fda14fc6f60cc915 192.168.22.33:7002@17002 master - 0 1571882669935 3 connected 12256-16383
    ca1b2bdd68386b788caa70969e2542c0185d8fdb 192.168.22.33:7004@17004 slave d4ce5c2d9e86161c3c9b2ddaccc32b37701e94fd 0 1571882668000 5 connected
    c972acd3671fad44257b2c533085c9335a9ed1bc 192.168.22.33:7006@17006 master - 0 1571882667000 7 connected 0-1332 5461-6794 10923-12255   # 已经分配了槽位
    3b2314e226123b1ad7270b83579c6329b1b8689d 192.168.22.33:7000@17000 master - 0 1571882668000 1 connected 1333-5460

添加对应的从节点

./bin/redis-cli --cluster add-node 192.168.22.33:7007  192.168.22.33:7000  --cluster-slave --cluster-master-id c972acd3671fad44257b2c533085c9335a9ed1bc
    >>> Adding node 192.168.22.33:7007 to cluster 192.168.22.33:7000
    >>> Performing Cluster Check (using node 192.168.22.33:7000)
    M: 3b2314e226123b1ad7270b83579c6329b1b8689d 192.168.22.33:7000
       slots:[3785-6794],[10923-12255] (4343 slots) master
       1 additional replica(s)
    M: c972acd3671fad44257b2c533085c9335a9ed1bc 192.168.22.33:7006
       slots:[0-1984],[6795-7801],[12256-13262] (3999 slots) master
    M: 2d591abdfbc44a925e822825fda14fc6f60cc915 192.168.22.33:7002
       slots:[1985-2884],[13263-16383] (4021 slots) master
       1 additional replica(s)
    S: ca1b2bdd68386b788caa70969e2542c0185d8fdb 192.168.22.33:7004
       slots: (0 slots) slave
       replicates d4ce5c2d9e86161c3c9b2ddaccc32b37701e94fd
    S: c1b945b0361046c9168875e4e1c1b496d9907516 192.168.22.33:7005
       slots: (0 slots) slave
       replicates 2d591abdfbc44a925e822825fda14fc6f60cc915
    M: d4ce5c2d9e86161c3c9b2ddaccc32b37701e94fd 192.168.22.33:7001
       slots:[2885-3784],[7802-10922] (4021 slots) master
       1 additional replica(s)
    S: 1f7234fc9dfe726d0af16fbd9b49c50b36f30803 192.168.22.33:7003
       slots: (0 slots) slave
       replicates 3b2314e226123b1ad7270b83579c6329b1b8689d
    [OK] All nodes agree about slots configuration.
    >>> Check for open slots...
    >>> Check slots coverage...
    [OK] All 16384 slots covered.
    >>> Send CLUSTER MEET to node 192.168.22.33:7007 to make it join the cluster.
    Waiting for the cluster to join
    
    >>> Configure node as replica of 192.168.22.33:7006.  # 可以看到7007作为7006的从
    [OK] New node added correctly.

[redis4.0.11]: https://blog.csdn.net/wyl9527/article/details/83615162
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3d5bDk1Mjc_size_16_color_FFFFFF_t_70]: /images/20230531/9a9e31f8737b4b4199795df33f65d50b.png