虚拟机Centos安装vsftpd，windows不能访问的问题，浏览器输入用户名密码后不跳转

以你之姓@ 2023-05-28 14:28 12阅读 0赞

centos上安装配置好之后。  
先打开终端，尝试连接一下  
![在这里插入图片描述][20200321151603979.png]  
如果你还没有ftp指令，就先yum install ftp安装一下，之后再来尝试。

vsftpd配置文件中有配置指定的ftp文件夹  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70]  
需要新建指定的/product/ftpfile文件夹，如果不新建会报下面的错。  
出现以下错误的话，就创建出文件夹/product/ftpfile  
为了演示，再文件夹里面再新建一个file文件`touch file`。  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 1]  
完整的vsftpd.config如下

# Example config file /etc/vsftpd/vsftpd.conf
    #
    # The default compiled in settings are fairly paranoid. This sample file
    # loosens things up a bit, to make the ftp daemon more usable.
    # Please see vsftpd.conf.5 for all compiled in defaults.
    #
    # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
    # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
    # capabilities.
    #
    # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
    #ftp文件夹的路径
    local_root=/product/ftpfile
    #开启后，访问ftp可以将目录退到根目录，不安全 
    #chroot_local_user=YES
    anon_root=/product/ftpfile
    use_localtime=YES
    
    #匿名
    #anonymous_enable=YES
    anonymous_enable=NO
    #
    # Uncomment this to allow local users to log in.
    local_enable=YES
    #
    # Uncomment this to enable any form of FTP write command.
    write_enable=YES
    #
    # Default umask for local users is 077. You may wish to change this to 022,
    # if your users expect that (022 is used by most other ftpd's)
    local_umask=022
    #
    # Uncomment this to allow the anonymous FTP user to upload files. This only
    # has an effect if the above global write enable is activated. Also, you will
    # obviously need to create a directory writable by the FTP user.
    #anon_upload_enable=YES
    #
    # Uncomment this if you want the anonymous FTP user to be able to create
    # new directories.
    #anon_mkdir_write_enable=YES
    #
    # Activate directory messages - messages given to remote users when they
    # go into a certain directory.
    dirmessage_enable=YES
    #
    # The target log file can be vsftpd_log_file or xferlog_file.
    # This depends on setting xferlog_std_format parameter
    xferlog_enable=YES
    #
    # Make sure PORT transfer connections originate from port 20 (ftp-data).
    connect_from_port_20=YES
    #
    # If you want, you can arrange for uploaded anonymous files to be owned by
    # a different user. Note! Using "root" for uploaded files is not
    # recommended!
    #chown_uploads=YES
    #chown_username=whoever
    #
    # The name of log file when xferlog_enable=YES and xferlog_std_format=YES
    # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log
    #xferlog_file=/var/log/xferlog
    #
    # Switches between logging into vsftpd_log_file and xferlog_file files.
    # NO writes to vsftpd_log_file, YES to xferlog_file
    xferlog_std_format=YES
    #
    # You may change the default value for timing out an idle session.
    #idle_session_timeout=600
    #
    # You may change the default value for timing out a data connection.
    #data_connection_timeout=120
    #
    # It is recommended that you define on your system a unique user which the
    # ftp server can use as a totally isolated and unprivileged user.
    #nopriv_user=ftpsecure
    #
    # Enable this and the server will recognise asynchronous ABOR requests. Not
    # recommended for security (the code is non-trivial). Not enabling it,
    # however, may confuse older FTP clients.
    #async_abor_enable=YES
    #
    # By default the server will pretend to allow ASCII mode but in fact ignore
    # the request. Turn on the below options to have the server actually do ASCII
    # mangling on files when in ASCII mode.
    # Beware that on some FTP servers, ASCII support allows a denial of service
    # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
    # predicted this attack and has always been safe, reporting the size of the
    # raw file.
    # ASCII mangling is a horrible feature of the protocol.
    #ascii_upload_enable=YES
    #ascii_download_enable=YES
    #
    # You may fully customise the login banner string:
    ftpd_banner=Welcome to mmall FTP Server
    #
    # You may specify a file of disallowed anonymous e-mail addresses. Apparently
    # useful for combatting certain DoS attacks.
    #deny_email_enable=YES
    # (default follows)
    #banned_email_file=/etc/vsftpd/banned_emails
    #
    # You may specify an explicit list of local users to chroot() to their home
    # directory. If chroot_local_user is YES, then this list becomes a list of
    # users to NOT chroot().
    
    #chroot_local_user=NO
    
    chroot_list_enable=YES
    # (default follows)
    chroot_list_file=/etc/vsftpd/chroot_list
    #
    # You may activate the "-R" option to the builtin ls. This is disabled by
    # default to avoid remote users being able to cause excessive I/O on large
    # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
    # the presence of the "-R" option, so there is a strong case for enabling it.
    #ls_recurse_enable=YES
    #
    # When "listen" directive is enabled, vsftpd runs in standalone mode and
    # listens on IPv4 sockets. This directive cannot be used in conjunction
    # with the listen_ipv6 directive.
    listen=YES
    
    #
    # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6
    # sockets, you must run two copies of vsftpd with two configuration files.
    # Make sure, that one of the listen options is commented !!
    #listen_ipv6=YES
    
    pam_service_name=vsftpd
    userlist_enable=YES
    tcp_wrappers=YES
    
    #pasv_enable=YES
    #配置端口
    pasv_min_port=61001
    pasv_max_port=62000

如果这里你尝试成功了，可以连接了，这时候证明centos上是可以用的，在centos的浏览器上也可以连接了  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 2]  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 3]  
然后，再来windows上试试，  
首先先关闭linux防火墙，`service iptables stop`

windows防火墙我是没有关闭的，windows上的安全软件（火绒）我也没有关。  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 4]  
此时可以访问。  
然后开启centos的防火墙。  
![在这里插入图片描述][2020032115244066.png]  
我在配置文件中的最大最小区间端口为61001：62000  
\[root@hadoop1 vsftpd\]\# vim /etc/vsftpd/vsftpd.conf  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 5]  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 6]  
![在这里插入图片描述][watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 7]  
然后开iptables也可以访问了。

[20200321151603979.png]: /images/20230528/d35561846da140dea0f31dcc92c5f00b.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70]: /images/20230528/5cb767907f1c406482a5861aad9fc4d1.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 1]: /images/20230528/9b2709d0ff2348ef8722a319b439d324.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 2]: /images/20230528/a0c0be97c6c843c4b67dd3a534f90dff.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 3]: /images/20230528/15ad6f628db04e0daf1c6ecfc4f3c83d.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 4]: /images/20230528/75b9ff46de6e449c87ba1d759d3aacf0.png
[2020032115244066.png]: /images/20230528/aac274466c3348808655764d283af2f6.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 5]: /images/20230528/69b56e4d8d91405e800c5f1ad6b812fd.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 6]: /images/20230528/a16ce420fd8f4281951113f679c526ae.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQzMzcxMDA0_size_16_color_FFFFFF_t_70 7]: /images/20230528/f5277d3eb18d47ffa9874080a5821994.png