搭建海思3559A-Qt5.8.0+Openssl开发环境

客官°小女子只卖身不卖艺 2023-02-20 04:59 6阅读 0赞

> 1.[参考4.8.7环境搭建][4.8.7]

> 2.主要区别

①解压Qt5.8.0源码文件后，进入到 qtbase/mkspecs目录下

②拷贝linux-arm-gnueabi-g++文件目录，更名为linux-aarch64-himix100

③进入到linux-aarch64-himix100目录下，修改qmake.conf文件，内容如下：

#
    # qmake configuration for building with aarch64-linux-gnu-g++
    #
    
    MAKEFILE_GENERATOR      = UNIX
    CONFIG                 += incremental
    QMAKE_INCREMENTAL_STYLE = sublib
    
    include(../common/linux.conf)
    include(../common/gcc-base-unix.conf)
    include(../common/g++-unix.conf)
    
    # modifications to g++.conf
    QMAKE_CC                = aarch64-himix100-linux-gcc
    QMAKE_CXX               = aarch64-himix100-linux-g++
    QMAKE_LINK              = aarch64-himix100-linux-g++
    QMAKE_LINK_SHLIB        = aarch64-himix100-linux-g++
    
    # modifications to linux.conf
    QMAKE_AR                = aarch64-himix100-linux-ar cqs
    QMAKE_OBJCOPY           = aarch64-himix100-linux-objcopy
    QMAKE_NM                = aarch64-himix100-linux-nm -P
    QMAKE_STRIP             = aarch64-himix100-linux-strip
    load(qt_config)

④回到qt-everywhere-opensource-src-5.8.0目录下，建立shell脚本qt.sh，内容如下

#!/bin/sh
    
    ./configure \
    		-prefix /home/admin/Qt-5.8.0-arm/ \
    		-release \
    		-opensource \
    		-make libs \
    		-xplatform linux-aarch64-himix100 \
    		-optimized-qmake \
    		-pch \
    		-linuxfb \
    		-qt-libjpeg \
    		-qt-zlib \
    		-qt-xcb \
    		-xcb-xlib \
    		-no-glib \
    		-no-opengl \
    		-no-sse2 \
    		-no-cups \
    		-no-iconv \
    		-no-accessibility \
    		-skip qt3d \
    		-skip qtcanvas3d \
    		-skip qtpurchasing \
    		-skip qtactiveqt \
    		-skip qtandroidextras \
    		-skip qtcharts \
    		-skip qtconnectivity \
    		-skip qtdatavis3d \
    		-skip qtdeclarative \
    		-skip qtgamepad \
    		-skip qtvirtualkeyboard \
    		-nomake examples \
    		-nomake tools \
    		-nomake tests \
    		-recheck-all \
    		-openssl-linked \
    		-I/home/admin/openssl-arm/include/openssl \
    		-L/home/admin/openssl-arm/lib/libssl.a \
    		-L/home/admin/openssl-arm/lib/libcrypto.a
    
    exit

⑤sh qt.sh执行脚本，生成makefile

⑥make && make install

[4.8.7]: https://blog.csdn.net/wzz953200463/article/details/106922693