linux发邮件失败,Linux SendMail发送邮件失败诊断案例，sendmail发送邮件

你的名字 2023-01-22 03:59 4阅读 0赞

Linux SendMail发送邮件失败诊断案例，sendmail发送邮件

Linux上Sendmail经常由于一些配置问题，导致邮件发送失败，下面整理、收集了一些邮件发送失败、异常的案例。

案例1：在新服务器上测试sendmail发送邮件时，发现邮件发送不成功，检查/var/log/maillog日志文件发现如下错误(Notice：hostname、邮箱地址等信息使用xxx代替)

tail /var/log/maillog

May 15 09:43:38 xxxxx sendmail\[9182\]: s4F1hcQe009182: from=root, size=58269, class=0, nrcpts=1, msgid=<201405150143.s4F1hcQe009182@xxxx>, relay=root@localhost

May 15 09:43:38 xxxxx sendmail\[9182\]: s4F1hcQe009182: to=konglb@xxxx, delay=00:00:00, mailer=esmtp, pri=88269, dsn=4.4.3, stat=queued

May 15 09:43:58 xxxxx sendmail\[9186\]: NOQUEUE: SYSERR(oracle): can not chdir(/var/spool/mqueue/): Permission denied

出现这个问题，是因为oracle账号没有权限访问/var/spool/mqueue，需要授予相关权限，如下所示：

chmod 755 /var/spool/mqueue

案例2：查看var/log/maillog日志文件发现如下错误

May 15 10:21:41 xxxxx sendmail\[9850\]: s4F2LfrT009850: to=, delay=00:00:00, mailer=esmtp, pri=37549, dsn=4.4.3, stat=queued

出现这个问题是因为dns server不正确设置导致，需要修改/etc/resolv.conf 下的nameserver值。

案例3：检查/var/log/maillog发现如下信息，邮件状态为Sent(stat=Sent)，但是依然没有收到邮件。

\[root@DB-Server mail\]\# tail /var/log/maillog

Dec 18 11:15:01 nbolnx01 sendmail\[25312\]: sBI3F18J025312: from=, size=607, class=0, nrcpts=1, msgid=<201412180315.sBI3F12b025302@nbolnx01.xxxx.xxxx>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain \[127.0.0.1\]

Dec 18 11:15:01 nbolnx01 sendmail\[25302\]: sBI3F12b025302: to=oracle, ctladdr=oracle (502/502), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30290, relay=\[127.0.0.1\] \[127.0.0.1\], dsn=2.0.0, stat=Sent (sBI3F18J025312 Message accepted for delivery)

Dec 18 11:15:01 nbolnx01 sendmail\[25327\]: sBI3F1mw025327: from=, size=599, class=0, nrcpts=1, msgid=<201412180315.sBI3F1Ba025321@xxxx.xxxx>, proto=ESMTP, daemon=MTA, relay=localhost.localdomain \[127.0.0.1\]

Dec 18 11:15:01 nbolnx01 sendmail\[25321\]: sBI3F1Ba025321: to=oracle, ctladdr=oracle (502/502), delay=00:00:00, xdelay=00:00:00, mailer=relay, pri=30282, relay=\[127.0.0.1\] \[127.0.0.1\], dsn=2.0.0, stat=Sent (sBI3F1mw025327 Message accepted for delivery)

检查mailq，如下所示，发现大量邮件处于等待发送的队列

\[root@DB-Server mail\]\# mailq

.................................................................

sBD2j1tq000440      214 Sat Dec 13 10:45

(host map: lookup (xxxx.com): deferred)

konglb@xxxx.com

sBD301x9000637      214 Sat Dec 13 11:00

(host map: lookup (xxxx.com): deferred)

konglb@xxxx.xxxx

Total requests: 120

\[root@nbolnx01 mail\]\#

出現了"host map: lookup (domain): deferred"错误，意味着邮件的发送被延迟了。需要通过修改配置文件/etc/mail/sendmail.cf。找到 \#O ResolverOptions=+AAONLY 这一行信息后将注释取消掉，然后重启sendmail服务即可解决问题。

![928972.html][]

\[root@DB-Server ~\]\# service sendmail stop

Shutting down sm-client: \[ OK \]

Shutting down sendmail: \[ OK \]

\[root@DB-Server ~\]\# service sendmail start

Starting sendmail: \[ OK \]

Starting sm-client: \[ OK \]

参考资料：

http://www.51osos.com/a/Linux\_CentOS\_RedHat/Linuxjichu/2010/1001/107.html

http://www.cnblogs.com/AloneSword/archive/2013/07/20/3203050.html

http://blog.chinaunix.net/uid-11888131-id-2804023.html

http://fanli7.net/a/caozuoxitong/OS/20120703/180401.html

http://blog.csdn.net/kindy1022/article/details/7639096

/images/20221020/f5ebb3e91c4442a5a6ed40cf4b64526e.pngwww.dengb.comtrue/images/20221020/f5ebb3e91c4442a5a6ed40cf4b64526e.pngTechArticleLinux SendMail发送邮件失败诊断案例，sendmail发送邮件 Linux上Sendmail经常由于一些配置问题，导致邮件发送失败，下面整理、收集了一些邮件发...

[928972.html]: /images/20221020/f5ebb3e91c4442a5a6ed40cf4b64526e.png