filebeat设置多个路径配置

傷城~ 2022-12-23 00:59 681阅读 0赞

###################### Filebeat Configuration Example #########################
    
    # This file is an example configuration file highlighting only the most common
    # options. The filebeat.reference.yml file from the same directory contains all the
    # supported options with more comments. You can use it as a reference.
    #
    # You can find the full configuration reference here:
    # https://www.elastic.co/guide/en/beats/filebeat/index.html
    
    # For more available modules and options, please see the filebeat.reference.yml sample
    # configuration file.
    
    # ============================== Filebeat inputs ===============================
    
    filebeat.inputs:
    
    # Each - is an input. Most options can be set at the input level, so
    # you can use different inputs for various configurations.
    # Below are the input specific configurations.
    
    - type: log
    
      # Change to true to enable this input configuration.
      enabled: true
    
      # Paths that should be crawled and fetched. Glob based paths.
      paths:
        - /data/logs/xxx-xxx-decision/*.log
      tags: ["xxx-xxx-decision"]
    - type: log
    
      # Change to true to enable this input configuration.
      enabled: true
    
      # Paths that should be crawled and fetched. Glob based paths.
      paths:
        - /data/logs/system-manage/*.log
      tags: ["system-manage"]
    - type: log
    
      # Change to true to enable this input configuration.
      enabled: true
    
      # Paths that should be crawled and fetched. Glob based paths.
      paths:
        - /data/logs/xxx-xxx-evaluation/*.log
      tags: ["xxx-xxx-evaluation"]
        #- c:\programdata\elasticsearch\logs\*
    
      # Exclude lines. A list of regular expressions to match. It drops the lines that are
      # matching any regular expression from the list.
      #exclude_lines: ['^DBG']
    
      # Include lines. A list of regular expressions to match. It exports the lines that are
      # matching any regular expression from the list.
      #include_lines: ['^ERR', '^WARN']
    
      # Exclude files. A list of regular expressions to match. Filebeat drops the files that
      # are matching any regular expression from the list. By default, no files are dropped.
      #exclude_files: ['.gz$']
    
      # Optional additional fields. These fields can be freely picked
      # to add additional information to the crawled log files for filtering
      #fields:
      # level: debug
      # review: 1
    
      ### Multiline options
    
      # Multiline can be used for log messages spanning multiple lines. This is common
      # for Java Stack Traces or C-Line Continuation
    
      # The regexp Pattern that has to be matched. The example pattern matches all lines starting with [
      #multiline.pattern: ^\[
    
      # Defines if the pattern set under pattern should be negated or not. Default is false.
      #multiline.negate: false
    
      # Match can be set to "after" or "before". It is used to define if lines should be append to a pattern
      # that was (not) matched before or after or as long as a pattern is not matched based on negate.
      # Note: After is the equivalent to previous and before is the equivalent to to next in Logstash
      #multiline.match: after
    
    # ============================== Filebeat modules ==============================
    
    filebeat.config.modules:
      # Glob pattern for configuration loading
      path: ${ path.config}/modules.d/*.yml
    
      # Set to true to enable config reloading
      reload.enabled: false
    
      # Period on which files under path should be checked for changes
      #reload.period: 10s
    
    # ======================= Elasticsearch template setting =======================
    
    setup.template.settings:
      index.number_of_shards: 1
      #index.codec: best_compression
      #_source.enabled: false
    
    
    
    # ================================== General ===================================
    
    # The name of the shipper that publishes the network data. It can be used to group
    # all the transactions sent by a single shipper in the web interface.
    #name:
    
    # The tags of the shipper are included in their own field with each
    # transaction published.
    #tags: ["service-X", "web-tier"]
    
    # Optional fields that you can specify to add additional information to the
    # output.
    #fields:
    # env: staging
    
    # ================================= Dashboards =================================
    # These settings control loading the sample dashboards to the Kibana index. Loading
    # the dashboards is disabled by default and can be enabled either by setting the
    # options here or by using the `setup` command.
    #setup.dashboards.enabled: false
    
    # The URL from where to download the dashboards archive. By default this URL
    # has a value which is computed based on the Beat name and version. For released
    # versions, this URL points to the dashboard archive on the artifacts.elastic.co
    # website.
    #setup.dashboards.url:
    
    # =================================== Kibana ===================================
    
    # Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API.
    # This requires a Kibana endpoint configuration.
    setup.kibana:
    
      # Kibana Host
      # Scheme and port can be left out and will be set to the default (http and 5601)
      # In case you specify and additional path, the scheme is required: http://localhost:5601/path
      # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601
      #host: "localhost:5601"
    
      # Kibana Space ID
      # ID of the Kibana Space into which the dashboards should be loaded. By default,
      # the Default Space will be used.
      #space.id:
    
    # =============================== Elastic Cloud ================================
    
    # These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/).
    
    # The cloud.id setting overwrites the `output.elasticsearch.hosts` and
    # `setup.kibana.host` options.
    # You can find the `cloud.id` in the Elastic Cloud web UI.
    #cloud.id:
    
    # The cloud.auth setting overwrites the `output.elasticsearch.username` and
    # `output.elasticsearch.password` settings. The format is `<user>:<pass>`.
    #cloud.auth:
    
    # ================================== Outputs ===================================
    
    # Configure what output to use when sending the data collected by the beat.
    
    # ---------------------------- Elasticsearch Output ----------------------------
    output.elasticsearch:
      # Array of hosts to connect to.
      hosts: ["10.254.193.137:9200"]
      
      indices:
        - index: "epu-bid-decision-%{[agent.version]}-%{+yyyy.MM.dd}"
          when.contains:
            tags: "epu-bid-decision"
        - index: "system-manage-%{[agent.version]}-%{+yyyy.MM.dd}"
          when.contains:
            tags: "system-manage"
        - index: "epu-bid-evaluation-%{[agent.version]}-%{+yyyy.MM.dd}"
          when.contains:
            tags: "epu-bid-evaluation"
      # Protocol - either `http` (default) or `https`.
      #protocol: "https"
    
      # Authentication credentials - either API key or username/password.
      #api_key: "id:api_key"
      username: "elastic"
      password: "changeme"
         
    # ------------------------------ Logstash Output -------------------------------
    #output.logstash:
      # The Logstash hosts
      #hosts: ["10.254.193.137:5044"]
    
      # Optional SSL. By default is off.
      # List of root certificates for HTTPS server verifications
      #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]
    
      # Certificate for SSL client authentication
      #ssl.certificate: "/etc/pki/client/cert.pem"
    
      # Client Certificate Key
      #ssl.key: "/etc/pki/client/cert.key"
    
    # ================================= Processors =================================
    
    # Configure processors to enhance or manipulate events generated by the beat.
    
    processors:
      - add_host_metadata: ~
      - add_cloud_metadata: ~
      - add_docker_metadata: ~
      - add_kubernetes_metadata: ~
    
    
    # ================================== Logging ===================================
    
    # Sets log level. The default log level is info.
    # Available log levels are: error, warning, info, debug
    #logging.level: debug
    
    # At debug level, you can selectively enable logging only for some components.
    # To enable all selectors use ["*"]. Examples of other selectors are "beat",
    # "publish", "service".
    #logging.selectors: ["*"]
    
    # ============================= X-Pack Monitoring ==============================
    # Filebeat can export internal metrics to a central Elasticsearch monitoring
    # cluster. This requires xpack monitoring to be enabled in Elasticsearch. The
    # reporting is disabled by default.
    
    # Set to true to enable the monitoring reporter.
    #monitoring.enabled: false
    
    # Sets the UUID of the Elasticsearch cluster under which monitoring data for this
    # Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch
    # is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch.
    #monitoring.cluster_uuid:
    
    # Uncomment to send the metrics to Elasticsearch. Most settings from the
    # Elasticsearch output are accepted here as well.
    # Note that the settings should point to your Elasticsearch *monitoring* cluster.
    # Any setting that is not set is automatically inherited from the Elasticsearch
    # output configuration, so if you have the Elasticsearch output configured such
    # that it is pointing to your Elasticsearch monitoring cluster, you can simply
    # uncomment the following line.
    #monitoring.elasticsearch:
    
    # ================================= Migration ==================================
    
    # This allows to enable 6.7 migration aliases
    #migration.6_to_7.enabled: true

点击加入QQ群交流：[415777345][]

### 彩蛋 ###

欢迎加入请求群学习交流：  
Java/Python架构师①群：415777345  
电脑PC用户快捷加入（点击超链接）：[415777345][415777345 1]  
手机QQ扫码加入：  
![在这里插入图片描述][20210402233658208.png]  
SpringBoot SpringCloud Docker K8s ①群：317945902  
电脑PC用户快捷加入（点击超链接）：[317945902][]  
手机QQ扫码加入：  
![在这里插入图片描述][20210402233641203.png]  
欢迎进群交流探讨！

[415777345]: https://jq.qq.com/?_wv=1027&k=KK1J5qjA
[415777345 1]: https://jq.qq.com/?_wv=1027&k=WZ3CYmkn
[20210402233658208.png]: /images/20221120/79057ea4a2ad486fbf97485cbd0ee352.png
[317945902]: https://jq.qq.com/?_wv=1027&k=oD9nEEFl
[20210402233641203.png]: https://img-blog.csdnimg.cn/20210402233641203.png