KubeEdge入门到精通-KubeEdge v1.3部署指南！

桃扇骨 2022-12-16 15:28 268阅读 0赞

**KubeEdge** 是一个开源系统，可将本机容器化的业务流程和设备管理扩展到Edge上的主机。它基于Kubernetes构建，并为网络，应用程序部署以及云与边缘之间的元数据同步提供核心基础架构支持。它还支持MQTT，并允许开发人员编写自定义逻辑并在Edge上启用资源受限的设备通信。KubeEdge由云部分和边缘部分组成，边缘和云部分现已开源，本文将基于Centos8.0系统对KugeEdge进行编译与部署。

# 一、系统配置 #

## 1.1 集群环境 ##

<table> 
 <thead> 
  <tr> 
   <th>主机名</th> 
   <th>角色</th> 
   <th>IP</th> 
   <th>工作负载</th> 
  </tr> 
 </thead> 
 <tbody> 
  <tr> 
   <td>ke-cloud</td> 
   <td>云端</td> 
   <td>192.168.1.66</td> 
   <td>k8s、docker、cloudcore</td> 
  </tr> 
  <tr> 
   <td>ke-edge1</td> 
   <td>边缘端</td> 
   <td>192.168.1.56</td> 
   <td>docker、edgecore</td> 
  </tr> 
  <tr> 
   <td>ke-edge2</td> 
   <td>边缘端</td> 
   <td>192.168.1.218</td> 
   <td>docker、edgecore</td> 
  </tr> 
 </tbody> 
</table>

## 1.2 禁用开机启动防火墙 ##

# systemctl disable firewalld

## 1.3 永久禁用SELinux ##

编辑文件/etc/selinux/config，将SELINUX修改为disabled，如下：

# sed -i 's/SELINUX=permissive/SELINUX=disabled/' /etc/sysconfig/selinux
    SELINUX=disabled

## 1.4 关闭系统Swap（可选） ##

Kbernetes 1.8 开始要求关闭系统的Swap，如果不关闭，默认配置下kubelet将无法启动，如下：

# sed -i 's/.*swap.*/#&/' /etc/fstab
    #/dev/mapper/centos-swap swap           swap   defaults     0 0

## 1.5 所有机器安装Docker ##

# yum install wget container-selinux -y
    # wget https://download.docker.com/linux/centos/7/x86_64/stable/Packages/containerd.io-1.2.6-3.3.el7.x86_64.rpm
    # yum erase runc -y
    # rpm -ivh containerd.io-1.2.6-3.3.el7.x86_64.rpm
    注意：上面的步骤在centos7中无须操作
    # update-alternatives --set iptables /usr/sbin/iptables-legacy
    # yum install -y yum-utils device-mapper-persistent-data lvm2 && yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo && yum makecache
    # yum -y install docker-ce
    # systemctl enable docker.service && systemctl start docker
    
    说明：如果想安装指定版本的Docker
    # yum -y install docker-ce-18.06.3.ce

## 1.6 重启系统 ##

# reboot

# 二、cloud节点部署K8s #

## 2.1 配置yum源 ##

[root@ke-cloud ~]# cat <<EOF > /etc/yum.repos.d/kubernetes.repo
    [kubernetes]
    name=Kubernetes
    baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64
    enabled=1
    gpgcheck=1
    repo_gpgcheck=1
    gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
    EOF

## 2.2 安装kubeadm、kubectl ##

[root@ke-cloud ~]# yum makecache
    [root@ke-cloud ~]# yum install -y kubelet kubeadm kubectl ipvsadm
    
    说明：如果想安装指定版本的kubeadm
    [root@ke-cloud ~]# yum install kubelet-1.17.0-0.x86_64 kubeadm-1.17.0-0.x86_64 kubectl-1.17.0-0.x86_64

## 2.3 配置内核参数 ##

[root@ke-cloud ~]# cat <<EOF >  /etc/sysctl.d/k8s.conf
    net.bridge.bridge-nf-call-ip6tables = 1
    net.bridge.bridge-nf-call-iptables = 1
    vm.swappiness=0
    EOF
    
    [root@ke-cloud ~]# sysctl --system
    [root@ke-cloud ~]# modprobe br_netfilter
    [root@ke-cloud ~]# sysctl -p /etc/sysctl.d/k8s.conf
    
    加载ipvs相关内核模块
    如果重新开机，需要重新加载（可以写在 /etc/rc.local 中开机自动加载）
    [root@ke-cloud ~]# modprobe ip_vs
    [root@ke-cloud ~]# modprobe ip_vs_rr
    [root@ke-cloud ~]# modprobe ip_vs_wrr
    [root@ke-cloud ~]# modprobe ip_vs_sh
    [root@ke-cloud ~]# modprobe nf_conntrack_ipv4
    
    查看是否加载成功
    [root@ke-cloud ~]# lsmod | grep ip_vs

## 2.4 拉取镜像 ##

用命令查看版本当前kubeadm对应的k8s组件镜像版本，如下：

[root@ke-cloud ~]# kubeadm config images list
    I0716 20:10:22.666500    6001 version.go:251] remote version is much newer: v1.18.6; falling back to: stable-1.17
    W0716 20:10:23.059486    6001 validation.go:28] Cannot validate kubelet config - no validator is available
    W0716 20:10:23.059501    6001 validation.go:28] Cannot validate kube-proxy config - no validator is available
    k8s.gcr.io/kube-apiserver:v1.17.9
    k8s.gcr.io/kube-controller-manager:v1.17.9
    k8s.gcr.io/kube-scheduler:v1.17.9
    k8s.gcr.io/kube-proxy:v1.17.9
    k8s.gcr.io/pause:3.1
    k8s.gcr.io/etcd:3.4.3-0
    k8s.gcr.io/coredns:1.6.5

使用kubeadm config images pull命令拉取上述镜像，如下：

[root@ke-cloud ~]# kubeadm config images pull
    I0716 20:11:12.188139    6015 version.go:251] remote version is much newer: v1.18.6; falling back to: stable-1.17
    W0716 20:11:12.580861    6015 validation.go:28] Cannot validate kube-proxy config - no validator is available
    W0716 20:11:12.580877    6015 validation.go:28] Cannot validate kubelet config - no validator is available
    [config/images] Pulled k8s.gcr.io/kube-apiserver:v1.17.9
    [config/images] Pulled k8s.gcr.io/kube-controller-manager:v1.17.9
    [config/images] Pulled k8s.gcr.io/kube-scheduler:v1.17.9
    [config/images] Pulled k8s.gcr.io/kube-proxy:v1.17.9
    [config/images] Pulled k8s.gcr.io/pause:3.1
    [config/images] Pulled k8s.gcr.io/etcd:3.4.3-0
    [config/images] Pulled k8s.gcr.io/coredns:1.6.5

查看下载下来的镜像，如下：

[root@ke-cloud ~]# docker images
    REPOSITORY                           TAG                 IMAGE ID            CREATED             SIZE
    k8s.gcr.io/kube-proxy                v1.17.9             ddc09a4c2193        19 hours ago        117MB
    k8s.gcr.io/kube-controller-manager   v1.17.9             c7f1dde319ee        19 hours ago        161MB
    k8s.gcr.io/kube-apiserver            v1.17.9             7417868987f3        19 hours ago        171MB
    k8s.gcr.io/kube-scheduler            v1.17.9             f7b1228fa995        19 hours ago        94.4MB
    k8s.gcr.io/coredns                   1.6.5               70f311871ae1        8 months ago        41.6MB
    k8s.gcr.io/etcd                      3.4.3-0             303ce5db0e90        8 months ago        288MB
    k8s.gcr.io/pause                     3.1                 da86e6ba6ca1        2 years ago         742kB

## 2.5 配置kubelet（可选） ##

在cloud端配置kubelet并非必须，主要是为了验证K8s集群的部署是否正确，也可以在云端搭建Dashboard等应用。

**获取Docker的cgroups**

[root@ke-cloud ~]# DOCKER_CGROUPS=$(docker info | grep 'Cgroup' | cut -d' ' -f4)
    [root@ke-cloud ~]# echo $DOCKER_CGROUPS
    cgroupfs

**配置kubelet的cgroups**

[root@ke-cloud ~]# cat >/etc/sysconfig/kubelet<<EOF
    KUBELET_EXTRA_ARGS="--cgroup-driver=$DOCKER_CGROUPS --pod-infra-container-image=k8s.gcr.io/pause:3.1"
    EOF

**启动kubelet**

[root@ke-cloud ~]# systemctl daemon-reload
    [root@ke-cloud ~]# systemctl enable kubelet && systemctl start kubelet

特别说明：在这里使用`systemctl status kubelet`会发现报错误信息，这个错误在运行kubeadm init 生成CA证书后会被自动解决，此处可先忽略。

## 2.6 初始化集群 ##

使用kubeadm init命令进行集群初始化，初始化完成必须要记录下初始化过程最后的命令，如下图所示：

[root@ke-cloud ~]# kubeadm init --kubernetes-version=v1.17.9 \
                          --pod-network-cidr=10.244.0.0/16 \
                          --apiserver-advertise-address=192.168.1.66 \
                          --ignore-preflight-errors=Swap
    
    [init] Using Kubernetes version: v1.17.9
    
    ...
    
    Your Kubernetes control-plane has initialized successfully!
    
    To start using your cluster, you need to run the following as a regular user:
    
      mkdir -p $HOME/.kube
      sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
      sudo chown $(id -u):$(id -g) $HOME/.kube/config
    
    You should now deploy a pod network to the cluster.
    Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
      https://kubernetes.io/docs/concepts/cluster-administration/addons/
    
    Then you can join any number of worker nodes by running the following on each as root:
    
    kubeadm join 192.168.1.66:6443 --token mskyxo.1gvtjenik78cm1ip \
        --discovery-token-ca-cert-hash sha256:89fd70b84d6beaff3c0223f288a675080034d108b5673cf66502267291078a04

**进一步配置kubectl**

[root@ke-cloud ~]# rm -rf $HOME/.kube
    [root@ke-cloud ~]# mkdir -p $HOME/.kube
    [root@ke-cloud ~]# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
    [root@ke-cloud ~]# chown $(id -u):$(id -g) $HOME/.kube/config

**查看node节点**

[root@ke-cloud ~]# systemctl status kubelet
    NAME       STATUS     ROLES    AGE    VERSION
    ke-cloud   NotReady   master   3m3s   v1.17.0

## 2.7 配置网络插件（可选） ##

> 特别说明：版本会经常更新，如果配置成功，就手动去[https://raw.githubusercontent.com/coreos/flannel/master/Documentation/][https_raw.githubusercontent.com_coreos_flannel_master_Documentation]下载最新版yaml文件

**下载flannel插件的yaml文件**

[root@ke-cloud ~]# cd ~ && mkdir flannel && cd flannel
    [root@ke-cloud ~]# curl -O https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml

**启动**

[root@ke-cloud ~]# kubectl apply -f ~/flannel/kube-flannel.yml

**查看**

[root@ke-cloud ~]# kubectl get node
    NAME       STATUS   ROLES    AGE   VERSION
    ke-cloud   Ready    master   12h   v1.17.0
    
    [root@ke-cloud ~]# kubectl get pods -n kube-system
    NAME                               READY   STATUS    RESTARTS   AGE
    coredns-6955765f44-k65xx           1/1     Running   0          12h
    coredns-6955765f44-r2q6g           1/1     Running   0          12h
    etcd-ke-cloud                      1/1     Running   0          12h
    kube-apiserver-ke-cloud            1/1     Running   0          12h
    kube-controller-manager-ke-cloud   1/1     Running   0          12h
    kube-flannel-ds-amd64-lrsrh        1/1     Running   0          12h
    kube-proxy-vr44d                   1/1     Running   0          12h
    kube-scheduler-ke-cloud            1/1     Running   0          12h
    
    [root@ke-cloud ~]# kubectl get svc
    NAME         TYPE        CLUSTER-IP   EXTERNAL-IP   PORT(S)   AGE
    kubernetes   ClusterIP   10.96.0.1    <none>        443/TCP   12h

注意：只有网络插件也安装配置完成之后，node才能会显示为ready状态。

## 2.8 K8s安装dashboard（可选） ##

参考：[https://github.com/kubernetes/dashboard][https_github.com_kubernetes_dashboard]

# 三、KubeEdge的安装与配置 #

## 3.1 cloud端配置 ##

cloud端负责编译KubeEdge的相关组件与运行cloudcore。

### 3.1.1 准备工作 ###

**下载golang**

[root@ke-cloud ~]# wget https://golang.google.cn/dl/go1.14.4.linux-amd64.tar.gz
    [root@ke-cloud ~]# tar -zxvf go1.14.4.linux-amd64.tar.gz -C /usr/local

**配置golang环境**

[root@ke-cloud ~]# vim /etc/profile
    文件末尾添加：
    # golang env
    export GOROOT=/usr/local/go
    export GOPATH=/data/gopath
    export PATH=$PATH:$GOROOT/bin:$GOPATH/bin
    
    [root@ke-cloud ~]# source /etc/profile
    [root@ke-cloud ~]# mkdir -p /data/gopath && cd /data/gopath
    [root@ke-cloud ~]# mkdir -p src pkg bin

**下载KubeEdge源码**

[root@ke-cloud ~]# git clone https://github.com/kubeedge/kubeedge $GOPATH/src/github.com/kubeedge/kubeedge

### 3.1.2 部署cloudcore ###

可以通过**本地部署**的方式部署KubeEdge（\*这需要单独编译cloudcore和edgecore\*，部署方式参考：[https://docs.kubeedge.io/en/latest/setup/local.html）][https_docs.kubeedge.io_en_latest_setup_local.html] ，也可以通过keadm的方式部署KubeEdge（部署方式参考：[https://docs.kubeedge.io/en/latest/setup/keadm.html）][https_docs.kubeedge.io_en_latest_setup_keadm.html] 。本文选用了在操作上更简单的keadm部署方式。

**编译kubeadm**

[root@ke-cloud ~]# cd $GOPATH/src/github.com/kubeedge/kubeedge
    [root@ke-cloud ~]# make all WHAT=keadm
    
    说明：编译后的二进制文件在./_output/local/bin下，单独编译cloudcore与edgecore的方式如下：
    [root@ke-cloud ~]# make all WHAT=cloudcore && make all WHAT=edgecore

**创建cloud节点**

[root@ke-cloud ~]# keadm init --advertise-address="192.168.1.66"
    
    Kubernetes version verification passed, KubeEdge installation will start...
    
    ...
    
    KubeEdge cloudcore is running, For logs visit:  /var/log/kubeedge/cloudcore.log
    CloudCore started

## 3.2 edge端配置 ##

edge端也可以通过keadm进行配置，可以将cloud端编译生成的二进制可执行文件通过scp命令复制到edge端。

### 3.2.1 从云端获取令牌 ###

在云端运行将返回令牌，该令牌将在加入边缘节点时使用。`keadm gettoken`

[root@ke-cloud ~]# keadm gettoken
    8ca5a29595498fbc0648ca59208681f9d18dae86ecff10e70991cde96a6f4199.eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJleHAiOjE1OTUwMzU0Mjh9.YR-N628S5wEFLifC0sM9t-IuIWkgSK-kizFnyAy5Q50

### 3.2.2 加入边缘节点 ###

`keadm join`将安装edgecore和mqtt。它还提供了一个标志，通过它可以设置特定的版本。

[root@ke-edge1 ~]# keadm join --cloudcore-ipport=192.168.1.66:10000 --token=8ca5a29595498fbc0648ca59208681f9d18dae86ecff10e70991cde96a6f4199.eyJhbGciOiJIUzI1NiIsInR5cCI6IkpXVCJ9.eyJleHAiOjE1OTUwMzU0Mjh9.YR-N628S5wEFLifC0sM9t-IuIWkgSK-kizFnyAy5Q50
    
    Host has mosquit+ already installed and running. Hence skipping the installation steps !!!
    
    ...
    
    KubeEdge edgecore is running, For logs visit:  /var/log/kubeedge/edgecore.log

重要的提示： \* –cloudcore-ipport 标志是强制性标志。 \* 如果要自动为边缘节点应用证书，–token则需要。 \* 云和边缘端使用的kubeEdge版本应相同。

## 3.3 验证 ##

边缘端在启动edgecore后，会与云端的cloudcore进行通信，K8s进而会将边缘端作为一个node纳入K8s的管控。

[root@ke-cloud ~]# kubectl get node
    NAME       STATUS   ROLES        AGE   VERSION
    ke-cloud   Ready    master       13h   v1.17.0
    ke-edge1   Ready    agent,edge   64s   v1.17.1-kubeedge-v1.3.1
    
    [root@ke-cloud ~]# kubectl get pods -n kube-system
    NAME                               READY   STATUS    RESTARTS   AGE
    coredns-6955765f44-k65xx           1/1     Running   0          13h
    coredns-6955765f44-r2q6g           1/1     Running   0          13h
    etcd-ke-cloud                      1/1     Running   0          13h
    kube-apiserver-ke-cloud            1/1     Running   0          13h
    kube-controller-manager-ke-cloud   1/1     Running   0          13h
    kube-flannel-ds-amd64-fgtdq        0/1     Error     5          5m55s
    kube-flannel-ds-amd64-lrsrh        1/1     Running   0          13h
    kube-proxy-vr44d                   1/1     Running   0          13h
    kube-scheduler-ke-cloud            1/1     Running   0          13h
    
    说明：如果在K8s集群中配置过flannel网络插件（见2.7），这里由于edge节点没有部署kubelet，
    所以调度到edge节点上的flannel pod会创建失败。这不影响KubeEdge的使用，可以先忽略这个问题。

# 四、运行KubeEdge示例 #

**选用示例：KubeEdge Counter Demo** 计数器是一个伪设备，用户无需任何额外的物理设备即可运行此演示。计数器在边缘侧运行，用户可以从云侧在Web中对其进行控制，也可以从云侧在Web中获得计数器值。原理图如下：

![image][]

详细文档参考：[https://github.com/kubeedge/examples/tree/master/kubeedge-counter-demo][https_github.com_kubeedge_examples_tree_master_kubeedge-counter-demo]

## 4.1 准备工作 ##

**1）本示例要求KubeEdge版本必须是v1.2.1+**

[root@ke-cloud ~]# kubectl get node
    NAME       STATUS   ROLES        AGE   VERSION
    ke-cloud   Ready    master       13h   v1.17.0
    ke-edge1   Ready    agent,edge   64s   v1.17.1-kubeedge-v1.3.1
    
    说明：本文接下来的验证将使用边缘节点ke-edge1进行，如果你参考本文进行相关验证，后续边缘节点名称的配置需要根据你的实际情况进行更改。

**2）下载示例代码：**

[root@ke-cloud ~]# git clone https://github.com/kubeedge/examples.git $GOPATH/src/github.com/kubeedge/examples

## 4.2 创建device model和device ##

**1）创建device model**

[root@ke-cloud ~]# cd $GOPATH/src/github.com/kubeedge/examples/kubeedge-counter-demo/crds
    [root@ke-cloud crds~]# kubectl create -f kubeedge-counter-model.yaml

**2）创建device**

根据你的实际情况修改matchExpressions：

[root@ke-cloud ~]# cd $GOPATH/src/github.com/kubeedge/examples/kubeedge-counter-demo/crds
    [root@ke-cloud crds~]# vim kubeedge-counter-instance.yaml
    apiVersion: devices.kubeedge.io/v1alpha1
    kind: Device
    metadata:
      name: counter
      labels:
        description: 'counter'
        manufacturer: 'test'
    spec:
      deviceModelRef:
        name: counter-model
      nodeSelector:
        nodeSelectorTerms:
        - matchExpressions:
          - key: 'kubernetes.io/hostname'
            operator: In
            values:
            - ke-edge1
    
    status:
      twins:
        - propertyName: status
          desired:
            metadata:
              type: string
            value: 'OFF'
          reported:
            metadata:
              type: string
            value: '0'
    
    [root@ke-cloud crds~]# kubectl create -f kubeedge-counter-instance.yaml

## 4.3 部署云端应用 ##

**1）修改代码**

云端应用web-controller-app用来控制边缘端的pi-counter-app应用，该程序默认监听的端口号为80，此处修改为8089，如下所示：

[root@ke-cloud ~]# cd $GOPATH/src/github.com/kubeedge/examples/kubeedge-counter-demo/web-controller-app
    [root@ke-cloud web-controller-app~]# vim main.go
    package main
    
    import (
            "github.com/astaxie/beego"
            "github.com/kubeedge/examples/kubeedge-counter-demo/web-controller-app/controller"
    )
    
    func main() {
            beego.Router("/", new(controllers.TrackController), "get:Index")
            beego.Router("/track/control/:trackId", new(controllers.TrackController), "get,post:ControlTrack")
    
            beego.Run(":8089")
    }

**2）构建镜像**

注意：构建镜像时，请将源码拷贝到GOPATH对应的路径下，如果开启了go mod请关闭。

[root@ke-cloud web-controller-app~]# make all
    [root@ke-cloud web-controller-app~]# make docker

**3）部署web-controller-app**

[root@ke-cloud ~]# cd $GOPATH/src/github.com/kubeedge/examples/kubeedge-counter-demo/crds
    [root@ke-cloud crds~]# kubectl apply -f kubeedge-web-controller-app.yaml

## 4.3 部署边缘端应用 ##

边缘端的pi-counter-app应用受云端应用控制，主要与mqtt服务器通信，进行简单的计数功能。

**1）修改代码与构建镜像**

需要将Makefile中的GOARCH修改为amd64才能运行该容器。

[root@ke-cloud ~]# cd $GOPATH/src/github.com/kubeedge/examples/kubeedge-counter-demo/counter-mapper
    [root@ke-cloud counter-mapper~]# vim Makefile
    .PHONY: all pi-execute-app docker clean
    all: pi-execute-app
    
    pi-execute-app:
            GOARCH=amd64 go build -o pi-counter-app main.go
    
    docker:
            docker build . -t kubeedge/kubeedge-pi-counter:v1.0.0
    
    clean:
            rm -f pi-counter-app
    
    [root@ke-cloud counter-mapper~]# make all
    [root@ke-cloud counter-mapper~]# make docker

**2）部署Pi Counter App**

[root@ke-cloud ~]# cd $GOPATH/src/github.com/kubeedge/examples/kubeedge-counter-demo/crds
    [root@ke-cloud crds~]# kubectl apply -f kubeedge-pi-counter-app.yaml
    
    说明：为了防止Pod的部署卡在`ContainerCreating`，这里直接通过docker save、scp和docker load命令将镜像发布到边缘端
    [root@ke-cloud ~]# docker save -o kubeedge-pi-counter.tar kubeedge/kubeedge-pi-counter:v1.0.0
    [root@ke-cloud ~]# scp kubeedge-pi-counter.tar root@192.168.1.56:/root
    [root@ke-edge1 ~]# docker load -i kubeedge-pi-counter.tar

## 4.4 体验Demo ##

现在，KubeEdge Demo的云端部分和边缘端的部分都已经部署完毕，如下：

[root@ke-cloud ~]# kubectl get pods -o wide
    NAME                                    READY   STATUS    RESTARTS   AGE     IP             NODE       NOMINATED NODE   READINESS GATES
    kubeedge-counter-app-758b9b4ffd-f8qjj   1/1     Running   0          26m     192.168.1.66   ke-cloud   <none>           <none>
    kubeedge-pi-counter-c69698d6-rb4xz      1/1     Running   0          2m      192.168.1.56   ke-edge1   <none>           <none>

我们现在开始测试一下该Demo运行效果：

**1）执行ON命令**

在web页面上选择ON，并点击Execute，可以在edge节点上通过以下命令查看执行结果：

[root@ke-edge1 ~]# docker logs -f counter-container-id

![image][image 1]

**2）查看counter STATUS**

在web页面上选择STATUS，并点击Execute，会在Web页面上返回counter当前的status，如下所示：![image][image 2]

**2）执行OFF命令**

在web页面上选择OFF，并点击Execute，可以再edge节点上通过以下命令查看执行结果：

[root@ke-edge1 ~]# docker logs -f counter-container-id

![image][image 3]

# End~ #

官方文档： [https://kubeedge.io/zh/blog/kubeedge-deployment-manual/][https_kubeedge.io_zh_blog_kubeedge-deployment-manual]

![SouthEast][]

![SouthEast 1][]

欢迎大家一起加入讨论！！！

[https_raw.githubusercontent.com_coreos_flannel_master_Documentation]: https://raw.githubusercontent.com/coreos/flannel/master/Documentation/
[https_github.com_kubernetes_dashboard]: https://github.com/kubernetes/dashboard
[https_docs.kubeedge.io_en_latest_setup_local.html]: https://docs.kubeedge.io/en/latest/setup/local.html%EF%BC%89
[https_docs.kubeedge.io_en_latest_setup_keadm.html]: https://docs.kubeedge.io/en/latest/setup/keadm.html%EF%BC%89
[image]: /images/20221123/1d98d3e41e5d4051b10961f78b77214d.png
[https_github.com_kubeedge_examples_tree_master_kubeedge-counter-demo]: https://github.com/kubeedge/examples/tree/master/kubeedge-counter-demo
[image 1]: /images/20221123/b9432bba857f49d4ba268fa5dea57b3a.png
[image 2]: /images/20221123/4ea32fd8385f440fb37f6de0f5ef424e.png
[image 3]: /images/20221123/8fdcb6fb693241b58b2501a47fb6b959.png
[https_kubeedge.io_zh_blog_kubeedge-deployment-manual]: https://kubeedge.io/zh/blog/kubeedge-deployment-manual/
[SouthEast]: /images/20221123/a4faff128a00485c865d6b9f4d40735c.png
[SouthEast 1]: /images/20221123/8986411757f8431d9a1f1f294e89bf5f.png