如何安全地使用 Lock 的unlock() 而不会抛出异常导致程序终止

待我称王封你为后i 2022-11-18 02:03 187阅读 0赞

# 如何安全地使用 Lock 的unlock() 而不会抛出异常导致程序终止 #

### 背景 ###

我们使用 synchronized 的话，不需要我们手工操作lock() 和 unlock()，但是在使用 juc Lock 的时候就需要注意，不注意这些细节，将为你的程序埋下坑，卖容易发现的坑还好，偏偏有些坑是比较隐蔽的。

### 正确的 unlock() ###

如何正确的使用Lock\#unlock()，如下

*  建议别用 `Lock lock = new ReentrantLock()`这样的代码，直接用实现类 `ReentrantLock lock = new ReentrantLock()`
 *  建议直接用 try-catch 包住异常，并且不处理任何异常，不打印日志
    
        public safeUnlock(Lock lock) { 
        	try { 
        		lock.unlock();
        	} catch(Exception e) { 
        	
        	}
        }
 *  有 isHeldByCurrentThread的，也可以用
    
        if (lock.isHeldByCurrentThread()) { 
        	lock.unlock();
        }
    
    > 但是并不是什么 Lock 的子类都有 `isHeldByCurrentThread()`，**所以还是统一用try-catch**，一了百了，又统一代码风格。
    > 
    >  *  比如 ReadLock就没有该方法

### 示例 ###

#### 1、例子1：ReentrantLock 的关闭 ####

unsafeUnlock的写法是危险的，假如在lock.lock() 的上面写了代码,并且这些代码发生了异常,惨了,没获得锁就进行解锁，会抛出了异常。正确的方式是先判断 isHeldByCurrentThread()

private static void testUnlockReentrantLock() { 
      ReentrantLock lock = new ReentrantLock();
      try { 
        int i = 8 / 0;
        lock.lock();
        // do sth
      } finally { 
        unsafeUnlock(lock);// 有风险
        // safeUnlock(lock);// 正确方法
      }
    }
    
    private static void unsafeUnlock(ReentrantLock lock) { 
      lock.unlock();
    }
    private static void safeUnlock(ReentrantLock lock) { 
      if (lock.isHeldByCurrentThread()) { 
        lock.unlock();
      }
      // 注意: 更安全是先判断 lock != null.不过这个不是今天的主角,就不突出NPE判断了
    }

#### 2、例子2：ReentrantLock的tryLock的关闭 ####

可以看到，第二个线程因为tryLock设置了超时时间，实际是不能获得线程的，如果直接lock.unlock() 会抛出异常。正确的解法有两种

*  unlock之间先判断 isHeldByCurrentThread() （**推荐**）
 *  使用布尔类型的值接收tryLock的返回值，如果是true才进行unlock

private static void testUnlockTryLock() { 
      ReentrantLock lock = new ReentrantLock();
      new Thread(() -> { 
        try { 
          lock.lock();
          sleep(5);
        } finally { 
          safeUnlock(lock);
        }
      }).start();
      sleep(1);
    
      new Thread(() -> { 
        try { 
          int i = 8 / 0;
          lock.tryLock(2, TimeUnit.SECONDS);
          // do sth
        } catch (InterruptedException e) { 
          e.printStackTrace();
        } finally { 
          unsafeUnlock(lock);// 有风险
          // safeUnlock(lock);// 解决办法
        }
      }).start();
    }

#### 3、例子3：关于WriteLock的关闭 ####

同样的道理，writeLock的关闭是一定要有 isHeldByCurrentThread() 判断的

private static void testUnlockReadWriteLock() { 
      ReentrantReadWriteLock readWriteLock = new ReentrantReadWriteLock();
      ReentrantReadWriteLock.ReadLock readLock = readWriteLock.readLock();
      ReentrantReadWriteLock.WriteLock writeLock = readWriteLock.writeLock();
    
      new Thread(() -> { 
        try { 
          readLock.lock();
          sleep(5);
        } finally { 
          readLock.unlock();
        }
      }).start();
      sleep(1);
    
      new Thread(() -> { 
        try { 
          int i = 8 / 0;
          writeLock.lock();
          // do sth
        } finally { 
          writeLock.unlock();// 有风险
          // if (writeLock.isHeldByCurrentThread()) writeLock.unlock(); // 正确
        }
      }).start();
    }

同样道理，writeLock如果使用tryLock，也是要用

private static void testUnlockReadWriteLock() { 
      ReentrantReadWriteLock readWriteLock = new ReentrantReadWriteLock();
      ReentrantReadWriteLock.ReadLock readLock = readWriteLock.readLock();
      ReentrantReadWriteLock.WriteLock writeLock = readWriteLock.writeLock();
    
      new Thread(() -> { 
        try { 
          readLock.lock();
          sleep(5);
        } finally { 
          readLock.unlock();
        }
      }).start();
      sleep(1);
    
      new Thread(() -> { 
        try { 
          writeLock.tryLock(2, TimeUnit.SECONDS);
          // do sth
        } catch (InterruptedException e) { 
          e.printStackTrace();
        } finally { 
          writeLock.unlock();// 有风险
          // if (writeLock.isHeldByCurrentThread()) writeLock.unlock();// 正确
        }
      }).start();
    }

#### 4、例子4：ReadLock 的关闭 ####

这个似乎没有什么好办法解决，因为ReadLock根本就没有 isHeldByCurrentThread() 方法。只能用 try-catch 包住unlock() 方法

private static void testUnlockReadLock() { 
      ReentrantReadWriteLock readWriteLock = new ReentrantReadWriteLock();
      ReentrantReadWriteLock.ReadLock readLock = readWriteLock.readLock();
      ReentrantReadWriteLock.WriteLock writeLock = readWriteLock.writeLock();
    
      new Thread(() -> { 
        try { 
          int i = 8 / 0;
          readLock.lock();
          sleep(5);
        } finally { 
          readLock.unlock();// 错误示范
          //try { readLock.unlock();} catch (Exception e) {}// 正确示范
        }
      }).start();
    }

#### 5、例子5：ReadLock 的 tryLock 的关闭 ####

下面的例子是WriteLock占用5秒，readLock尝试2秒内获得锁，否则不再等待。此时进行unlock会报错，由于ReadLock没有 isHeldByCurrentThread()，所以也只能用try-catch判断了

private static void testUnlockReadLockTryLock() { 
      ReentrantReadWriteLock readWriteLock = new ReentrantReadWriteLock();
      ReentrantReadWriteLock.ReadLock readLock = readWriteLock.readLock();
      ReentrantReadWriteLock.WriteLock writeLock = readWriteLock.writeLock();
    
      new Thread(() -> { 
        try { 
          writeLock.lock();
          sleep(5);
        } finally { 
          if (writeLock.isHeldByCurrentThread()) writeLock.unlock();
        }
      }).start();
    
      sleep(1);
    
      new Thread(() -> { 
        try { 
          readLock.tryLock(2, TimeUnit.SECONDS);
        } catch (InterruptedException e) { 
          e.printStackTrace();
        } finally { 
          readLock.unlock();// 错误示范
          // try { readLock.unlock();} catch (Exception e) {}// 正确示范
        }
      }).start();
    }