安卓10 来电流程梳理

阳光穿透心脏的1/2处 2022-11-03 04:29 624阅读 0赞

来电过程， 是由com.android.phone进程发起的，因为 com.android.phone 进程中 Telephony 直接与Moderm层交互， com.android.phone 进程收到来来电消息后，发送消息给 system 进程， system 进程（Telecom作为中介）开始和com.android.phone 进程建立链接， 并通知 UI 进程 (com.android.dialer) 更新。大体上和拨号过程类似。

**来电流程时序图：**

![75cc87e964768b68a9d7181d659f4437.png][]

对于MO Call来说，一般是由用户自己操作来发起的主动动作,可以根据UI上的button来跟踪流程。但是对于MTcall来说，一般是被动的接收modem的消息，不太好从UI的层面来跟踪流程，所以大概的总结下MT流程。

首先，查来电消息的处理。在来电时，首先是由modem向上上报来电的消息，上层来处理。第一条消息是：RIL\_UNSOL\_RESPONSE\_CALL\_STATE\_CHANGED，消息报上来后，到RadioIndication.java来处理（在Android O后，UNSOL消息在RadioIndication处理，SOL消息在RadioResponse里处理。替代了之前的processUnsolicited & processSolicited方法）。这条消息就是modem 告知上层：当前Call的状态发送变化了。但是上层并不知道真正的变化是什么，所以Tele回去询问当前Call到底是属于什么状态，发出请求：RIL\_REQUEST\_GET\_CURRENT\_CALLS。当Modem得到这些请求后，会将这些信息返回给Tele.

从RIL层开始往上追溯，**RIL接收底层来电消息。**来电的消息属于主动上报的UnSolicited消息,其对应的事件ID是CALL\_STATE\_CHANGE,我们进入RIL.java开始查找。

UNSOL\_RESPONSE\_CALL STATE CHANGED状态改变

*  ### [frameworks][]/[opt][]/[telephony][]/[src][]/[java][]/[com][]/[android][]/[internal][]/[telephony][telephony 1]/[RIL.java][] ###

@UnsupportedAppUsage
    5692      void unsljLog(int response) {
    5693          riljLog("[UNSL]< " + responseToString(response));
    5694      }
    
     @UnsupportedAppUsage
    5561      static String responseToString(int request) {
    5562          switch(request) {
    5563              case RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED:
    5564                  return "UNSOL_RESPONSE_RADIO_STATE_CHANGED";
    5565              case RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED:
    5566                  return "UNSOL_RESPONSE_CALL_STATE_CHANGED";
    5567              case RIL_UNSOL_RESPONSE_NETWORK_STATE_CHANGED:

1.  ### [frameworks][]/[opt][]/[telephony][]/[src][]/[java][]/[com][]/[android][]/[internal][]/[telephony][telephony 1]/[RadioIndication.java][] ###

RadioIndication 类有17 个方法调用RIL 对象的unsljLog 方法打印消息，处理此  
RIL 消息的代码逻辑详情如下：

public void callStateChanged(int indicationType) {
            mRil.processIndication(indicationType);
    
            if (RIL.RILJ_LOGD) mRil.unsljLog(RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED);
    
            mRil.mCallStateRegistrants.notifyRegistrants();
        }

1.  调用processIndication向底层发送确认收到消息
2.  notifyRegistrant发出通知

**RIL层在接收到底层的消息后，发起了notify通知。----------- 观测者模式**

其中：

public class RadioIndication extends IRadioIndication.Stub {

而 mCallStateRegistrants 在：

RIL继承于父类 BaseCommands ，实现了 mCallStateRegistrants

public class RIL extends BaseCommands implements CommandsInterface

protected RegistrantList mCallStateRegistrants = new RegistrantList();

![20201118140822799.png][]

此处是： registerForCallStateChanged

搜索到有：

1.  BaseCommands
2.  GsmCdmaCallTracker
3.  CommandsInterface

其中BascCommands,CommandsInterface都是接口

mCalIStateReg istrants. notifyRegistrant 发出通知后，仅一个 地方可响应此消息通知，即**GsmCdmaCallTracker 类的handleMessage 方法，**本质上是个Handler处理类

*  ### [frameworks][]/[opt][]/[telephony][]/[src][]/[java][]/[com][]/[android][]/[internal][]/[telephony][telephony 1]/[GsmCdmaCallTracker.java][] ###

**跟进GsmCdmaCallTracker的handleMessage方法，**可以看到其在初始化的地方注册了CallStateChanged消息的监听，注册的时候传入了自身的handler，notify的时候使用该handler发送消息，所以我们可以在handleMessage中响应并处理EVENT\_CALL\_STATE\_CHANGE消息。

@Override
        public void handleMessage(Message msg) {
            AsyncResult ar;
    
            switch (msg.what) {
                ...
                 case EVENT_CALL_STATE_CHANGE:
                    pollCallsWhenSafe();
    
                ...

pollCallsWhenSafe 调用父类CallTracker 方法

*  ### [frameworks][]/[opt][]/[telephony][]/[src][]/[java][]/[com][]/[android][]/[internal][]/[telephony][telephony 1]/[CallTracker.java][] ###

protected void pollCallsWhenSafe() {
            mNeedsPoll = true;
    
                mLastRelevantPoll = obtainMessage(EVENT_POLL_CALLS_RESULT);
                mCi.getCurrentCalls(mLastRelevantPoll);
            }
        }

发现其又调用了mCi.getCurrentCalls去查询当前的Call情况，此方法会调用到RIL中对应的方法去（Phone创建的时候对mCi进行初始化使得具有RIL通信能力，其mCi即调用RIL.java）

又回到了 RIL 中

*  ### [frameworks][]/[opt][]/[telephony][]/[src][]/[java][]/[com][]/[android][]/[internal][]/[telephony][telephony 1]/[RIL.java][] ###

@Override
        public void getCurrentCalls(Message result) {
            IRadio radioProxy = getRadioProxy(result);
            if (radioProxy != null) {
                RILRequest rr = obtainRequest(RIL_REQUEST_GET_CURRENT_CALLS, result,
                        mRILDefaultWorkSource);
    
                if (RILJ_LOGD) {
                    riljLog(rr.serialString() + "> " + requestToString(rr.mRequest));
                }
    
                try {
    
                  //向底层发起请求
                    radioProxy.getCurrentCalls(rr.mSerial);
                } catch (RemoteException | RuntimeException e) {
                    handleRadioProxyExceptionForRR(rr, "getCurrentCalls", e);
                }
            }
        }

在发送请求后，等待modem返回结果给RIL层，继续跟踪返回消息的接收(**省去 与 RIL 层的交互**)

在RIL.java中查找底层消息反馈的处理方法,发现有两个方法processRespose和processResponseDone，向上追溯发现其是在RadioResponse.java中的

responseCurrentCalls方法 调用了 processResponseDone 方法，如下：

*  ### [frameworks][]/[opt][]/[telephony][]/[src][]/[java][]/[com][]/[android][]/[internal][]/[telephony][telephony 1]/[RadioResponse.java][] ###

其继承自一个底层的服务

public class RadioResponse extends IRadioResponse.Stub

**CurrentCall的消息继续在responseCurrentCalls方法**追踪。

public void getCurrentCallsResponse(RadioResponseInfo responseInfo,
                                            ArrayList<android.hardware.radio.V1_0.Call> calls) {
            responseCurrentCalls(responseInfo, calls);
        }

**继续追踪调用的responseCurrentCalls方法**

private void responseCurrentCalls(RadioResponseInfo responseInfo,
                                          ArrayList<android.hardware.radio.V1_0.Call> calls) {
            RILRequest rr = mRil.processResponse(responseInfo);
    
            if (rr != null) {
                int num = calls.size();
                ArrayList<DriverCall> dcCalls = new ArrayList<DriverCall>(num);
                DriverCall dc;
    
                for (int i = 0; i < num; i++) {
                    dc = new DriverCall();
                    // TODO: change name of function stateFromCLCC() in DriverCall.java to name
                    // clarifying what is CLCC
                    dc.state = DriverCall.stateFromCLCC((int) (calls.get(i).state));
                    dc.index = calls.get(i).index;
                    dc.TOA = calls.get(i).toa;
                    dc.isMpty = calls.get(i).isMpty;
                    dc.isMT = calls.get(i).isMT;
                    dc.als = calls.get(i).als;
                    dc.isVoice = calls.get(i).isVoice;
                    dc.isVoicePrivacy = calls.get(i).isVoicePrivacy;
                    dc.number = calls.get(i).number;
                    dc.numberPresentation =
                            DriverCall.presentationFromCLIP(
                                    (int) (calls.get(i).numberPresentation));
                    dc.name = calls.get(i).name;
                    dc.namePresentation =
                            DriverCall.presentationFromCLIP((int) (calls.get(i).namePresentation));
                    if (calls.get(i).uusInfo.size() == 1) {
                        dc.uusInfo = new UUSInfo();
                        dc.uusInfo.setType(calls.get(i).uusInfo.get(0).uusType);
                        dc.uusInfo.setDcs(calls.get(i).uusInfo.get(0).uusDcs);
                        if (!TextUtils.isEmpty(calls.get(i).uusInfo.get(0).uusData)) {
                            byte[] userData = calls.get(i).uusInfo.get(0).uusData.getBytes();
                            dc.uusInfo.setUserData(userData);
                        } else {
                            mRil.riljLog("responseCurrentCalls: uusInfo data is null or empty");
                        }
    
                        mRil.riljLogv(String.format("Incoming UUS : type=%d, dcs=%d, length=%d",
                                dc.uusInfo.getType(), dc.uusInfo.getDcs(),
                                dc.uusInfo.getUserData().length));
                        mRil.riljLogv("Incoming UUS : data (hex): "
                                + IccUtils.bytesToHexString(dc.uusInfo.getUserData()));
                    } else {
                        mRil.riljLogv("Incoming UUS : NOT present!");
                    }
    
                    // Make sure there's a leading + on addresses with a TOA of 145
                    dc.number = PhoneNumberUtils.stringFromStringAndTOA(dc.number, dc.TOA);
    
                    dcCalls.add(dc);
    
                    if (dc.isVoicePrivacy) {
                        mRil.mVoicePrivacyOnRegistrants.notifyRegistrants();
                        mRil.riljLog("InCall VoicePrivacy is enabled");
                    } else {
                        mRil.mVoicePrivacyOffRegistrants.notifyRegistrants();
                        mRil.riljLog("InCall VoicePrivacy is disabled");
                    }
                }
    
                Collections.sort(dcCalls);
    
                if ((num == 0) && mRil.mTestingEmergencyCall.getAndSet(false)) {
                    if (mRil.mEmergencyCallbackModeRegistrant != null) {
                        mRil.riljLog("responseCurrentCalls: call ended, testing emergency call,"
                                + " notify ECM Registrants");
                        mRil.mEmergencyCallbackModeRegistrant.notifyRegistrant();
                    }
                }
                //发送返回消息
                if (responseInfo.error == RadioError.NONE) {
                    sendMessageResponse(rr.mResult, dcCalls);
                }
                mRil.processResponseDone(rr, responseInfo, dcCalls);
            }
        }
     发现其通过底层返回的消息创建了dcCalls对象，也就是当前的Call状态信息，对dc状态进行判断后如果有需要就notify通知，如果没有异常则通过sendMessageResponse方法发送消息
         public static void sendMessageResponse(Message msg, Object ret) {
            if (msg != null) {
                AsyncResult.forMessage(msg, ret, null);
                msg.sendToTarget();
            }
        }

**继续回到GsmCdmaCallTracker的handleMessage中**,之前发送请求的时候有发送EVENT\_POLL\_CALLS\_RESULT，这里我们继续回到该事件处理的地方来分析

*  ### [frameworks][]/[opt][]/[telephony][]/[src][]/[java][]/[com][]/[android][]/[internal][]/[telephony][telephony 1]/[GsmCdmaCallTracker.java][] ###

@Override
        public void handleMessage(Message msg) {
            AsyncResult ar;
    
            switch (msg.what) {
                case EVENT_POLL_CALLS_RESULT:
                    Rlog.d(LOG_TAG, "Event EVENT_POLL_CALLS_RESULT Received");
    
                    if (msg == mLastRelevantPoll) {
                        if (DBG_POLL) log(
                                "handle EVENT_POLL_CALL_RESULT: set needsPoll=F");
                        mNeedsPoll = false;
                        mLastRelevantPoll = null;
                        handlePollCalls((AsyncResult)msg.obj);
                    }
                break;

**继续追踪handlePollCalls**

@Override
        protected synchronized void handlePollCalls(AsyncResult ar) {
            //解析返回的结果
            for (int i = 0, curDC = 0, dcSize = polledCalls.size()
                    ; i < mConnections.length; i++) {
                GsmCdmaConnection conn = mConnections[i];
                DriverCall dc = null;
    
                // polledCall list is sparse
                if (curDC < dcSize) {
                    dc = (DriverCall) polledCalls.get(curDC);
    
                    if (dc.index == i+1) {
                        curDC++;
                    } else {
                        dc = null;
                    }
                }
                ...
                if (conn == null && dc != null) {
                ...状态的处理及识别
    
            //响铃消息通知
            if (newRinging != null) {
                mPhone.notifyNewRingingConnection(newRinging);
            }
    
            // clear the "local hangup" and "missed/rejected call"
            // cases from the "dropped during poll" list
            // These cases need no "last call fail" reason
            ArrayList<GsmCdmaConnection> locallyDisconnectedConnections = new ArrayList<>();
            for (int i = mDroppedDuringPoll.size() - 1; i >= 0 ; i--) {
                GsmCdmaConnection conn = mDroppedDuringPoll.get(i);
                //CDMA
                boolean wasDisconnected = false;
                //来电处理，本地挂断或者未接，本地挂断的话直接设置挂断的原因为LOCAL或INVALID_NUMBER
                if (conn.isIncoming() && conn.getConnectTime() == 0) {
                    // Missed or rejected call
                    int cause;
                    if (conn.mCause == DisconnectCause.LOCAL) {
                        cause = DisconnectCause.INCOMING_REJECTED;
                    } else {
                        cause = DisconnectCause.INCOMING_MISSED;
                    }
    
                    if (Phone.DEBUG_PHONE) {
                        log("missed/rejected call, conn.cause=" + conn.mCause);
                        log("setting cause to " + cause);
                    }
                    mDroppedDuringPoll.remove(i);
                    hasAnyCallDisconnected |= conn.onDisconnect(cause);
                    wasDisconnected = true;
                    locallyDisconnectedConnections.add(conn);
                } else if (conn.mCause == DisconnectCause.LOCAL
                        || conn.mCause == DisconnectCause.INVALID_NUMBER) {
                    mDroppedDuringPoll.remove(i);
                    hasAnyCallDisconnected |= conn.onDisconnect(conn.mCause);
                    wasDisconnected = true;
                    locallyDisconnectedConnections.add(conn);
                }
    
                if (!isPhoneTypeGsm() && wasDisconnected && unknownConnectionAppeared
                        && conn == newUnknownConnectionCdma) {
                    unknownConnectionAppeared = false;
                    newUnknownConnectionCdma = null;
                }
            }
            if (locallyDisconnectedConnections.size() > 0) {
                mMetrics.writeRilCallList(mPhone.getPhoneId(), locallyDisconnectedConnections);
            }
    
            /* Disconnect any pending Handover connections */
            //通话断开的一些处理操作
            ...
            if (newRinging != null || hasNonHangupStateChanged || hasAnyCallDisconnected) {
                internalClearDisconnected();
            }
            //更新phone状态
            if (VDBG) log("handlePollCalls calling updatePhoneState()");
            updatePhoneState();
    
            ...
    
        }

其先对底层反馈的消息进行解析，获取其通话状态，判断如果是来电则发出notifyNewRingingConnection响铃消息通知，然后进行一些通话断开连接的操作及更新phone状态。继续跟进notifyNewRingingConnection响铃消息，该消息调用的是phone的方法，往上追溯。

**继续查看响铃消息通知到何处**，全局搜索（registerForNewRingingConnection)，找到

PstnIncommingCallNotifier.java

*  ### [packages][]/[services][]/[Telephony][]/[src][src 1]/[com][com 1]/[android][android 1]/[services][services 1]/[telephony][telephony 2]/[PstnIncomingCallNotifier.java][] ###

/**
     * Listens to incoming-call events from the associated phone object and notifies Telecom upon each
     * occurence. One instance of these exists for each of the telephony-based call services.
     */

用来 监听来电消息

private final Handler mHandler = new Handler() {
            @Override
            public void handleMessage(Message msg) {
                switch(msg.what) {
                    case EVENT_NEW_RINGING_CONNECTION:
                        handleNewRingingConnection((AsyncResult) msg.obj);
                        break;
                    case EVENT_CDMA_CALL_WAITING:
                        handleCdmaCallWaiting((AsyncResult) msg.obj);
                        break;
                    case EVENT_UNKNOWN_CONNECTION:
                        handleNewUnknownConnection((AsyncResult) msg.obj);
                        break;
                    default:
                        break;
                }
            }
        };

继续调用handleNewRingingConnection方法处理调用sendIncommingCallIntent发送Intent，这里其实就已经从RIL传递消息到了应用层了

private void handleNewRingingConnection(AsyncResult asyncResult) {
            Log.d(this, "handleNewRingingConnection");
            Connection connection = (Connection) asyncResult.result;
            if (connection != null) {
                Call call = connection.getCall();
                // Check if we have a pending number verification request.
                if (connection.getAddress() != null) {
                    if (NumberVerificationManager.getInstance()
                            .checkIncomingCall(connection.getAddress())) {
                        // Disconnect the call if it matches
                        try {
                            connection.hangup();
                        } catch (CallStateException e) {
                            Log.e(this, e, "Error hanging up potential number verification call");
                        }
                        return;
                    }
                }
    
                // Final verification of the ringing state before sending the intent to Telecom.
                if (call != null && call.getState().isRinging()) {
                    sendIncomingCallIntent(connection);
                }
            }
        }

private void sendIncomingCallIntent(Connection connection) {
            ------
    
            PhoneAccountHandle handle = findCorrectPhoneAccountHandle();
            if (handle == null) {
                try {
                    connection.hangup();
                } catch (CallStateException e) {
                    // connection already disconnected. Do nothing
                }
            } else {
                TelecomManager.from(mPhone.getContext()).addNewIncomingCall(handle, extras);
            }
        }

//获取telecomm服务，通过aidl接口调用 telecomService 的addNewIncomingCall方法

//获取telecomm服务
        public static TelecomManager from(Context context) {
            return (TelecomManager) context.getSystemService(Context.TELECOM_SERVICE);
        }

### 进入到**TelecomService层** ###

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[TelecomServiceImpl.java][] ###

108      private final ITelecomService.Stub mBinderImpl = new ITelecomService.Stub() {
    109          @Override
    
    1083          public void addNewIncomingCall(PhoneAccountHandle phoneAccountHandle, Bundle extras) {
    1084              try {
    1085                  Log.startSession("TSI.aNIC");
    1086                  synchronized (mLock) {
    1087                      Log.i(this, "Adding new incoming call with phoneAccountHandle %s",
    1088                              phoneAccountHandle);
    1089                      。。。。。。。。。
    。。。。。。。。。
    1116                          long token = Binder.clearCallingIdentity();
    1117                          try {
    1118                              Intent intent = new Intent(TelecomManager.ACTION_INCOMING_CALL);
    1119                              intent.putExtra(TelecomManager.EXTRA_PHONE_ACCOUNT_HANDLE,
    1120                                      phoneAccountHandle);
    1121                              intent.putExtra(CallIntentProcessor.KEY_IS_INCOMING_CALL, true);
    1122                              if (extras != null) {
    1123                                  extras.setDefusable(true);
    1124                                  intent.putExtra(TelecomManager.EXTRA_INCOMING_CALL_EXTRAS, extras);
    1125                              }
    1126                              mCallIntentProcessorAdapter.processIncomingCallIntent(
    1127                                      mCallsManager, intent);
    1128                          } finally {
    1129                              Binder.restoreCallingIdentity(token);
    1130                          }
    1131                      } else {
    1132                          Log.w(this, "Null phoneAccountHandle. Ignoring request to add new" +
    1133                                  " incoming call");
    1134                      }
    1135                  }
    1136              } finally {
    1137                  Log.endSession();
    1138              }
    1139          }

**继续跟进mCallIntentProcessorAdapter.processIncomingCallIntent,**

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[CallIntentProcessor.java][] ###

287      static void processIncomingCallIntent(CallsManager callsManager, Intent intent) {
    288          PhoneAccountHandle phoneAccountHandle = intent.getParcelableExtra(
    289                  TelecomManager.EXTRA_PHONE_ACCOUNT_HANDLE);
    290  
    291          if (phoneAccountHandle == null) {
    292              Log.w(CallIntentProcessor.class,
    293                      "Rejecting incoming call due to null phone account");
    294              return;
    295          }
    296          if (phoneAccountHandle.getComponentName() == null) {
    297              Log.w(CallIntentProcessor.class,
    298                      "Rejecting incoming call due to null component name");
    299              return;
    300          }
    301  
    302          Bundle clientExtras = null;
    303          if (intent.hasExtra(TelecomManager.EXTRA_INCOMING_CALL_EXTRAS)) {
    304              clientExtras = intent.getBundleExtra(TelecomManager.EXTRA_INCOMING_CALL_EXTRAS);
    305          }
    306          if (clientExtras == null) {
    307              clientExtras = new Bundle();
    308          }
    309  
    310          Log.d(CallIntentProcessor.class,
    311                  "Processing incoming call from connection service [%s]",
    312                  phoneAccountHandle.getComponentName());
    313          callsManager.processIncomingCallIntent(phoneAccountHandle, clientExtras);
    314      }

![20201118155618163.png][]

**--------------------------------------------------------------------------**

**下方与拨号相同**

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[CallsManager.java][] ###

**进入到CallsManager中继续跟进**

void processIncomingCallIntent(PhoneAccountHandle phoneAccountHandle, Bundle extras) {
            Log.d(this, "processIncomingCallIntent");
            ...
            Call call = new Call(
                    getNextCallId(),
                    mContext,
                    this,
                    mLock,
                    mConnectionServiceRepository,
                    mContactsAsyncHelper,
                    mCallerInfoAsyncQueryFactory,
                    mPhoneNumberUtilsAdapter,
                    handle,
                    null /* gatewayInfo */,
                    null /* connectionManagerPhoneAccount */,
                    phoneAccountHandle,
                    Call.CALL_DIRECTION_INCOMING /* callDirection */,
                    false /* forceAttachToExistingConnection */,
                    false, /* isConference */
                    mClockProxy);
    
            ...
            call的一些状态设置
            ...
            call.initAnalytics();
            if (getForegroundCall() != null) {
                getForegroundCall().getAnalytics().setCallIsInterrupted(true);
                call.getAnalytics().setCallIsAdditional(true);
            }
            setIntentExtrasAndStartTime(call, extras);
            //添加监听
            // TODO: Move this to be a part of addCall()
            call.addListener(this);
    
            if (!isHandoverAllowed || (call.isSelfManaged() && !isIncomingCallPermitted(call,
                    call.getTargetPhoneAccount()))) {
                notifyCreateConnectionFailed(phoneAccountHandle, call);
            } else {
                //成功上报上去建立连接
                call.startCreateConnection(mPhoneAccountRegistrar);
            }
        }

![20201118155736505.png][]

![20201118155755813.png][]

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[Call.java][] ###

void startCreateConnection(PhoneAccountRegistrar phoneAccountRegistrar) {
            if (mCreateConnectionProcessor != null) {
                Log.w(this, "mCreateConnectionProcessor in startCreateConnection is not null. This is" +
                        " due to a race between NewOutgoingCallIntentBroadcaster and " +
                        "phoneAccountSelected, but is harmlessly resolved by ignoring the second " +
                        "invocation.");
                return;
            }
            mCreateConnectionProcessor = new CreateConnectionProcessor(this, mRepository, this,
                    phoneAccountRegistrar, mContext);
            mCreateConnectionProcessor.process();
        }

**继续跟踪process 方法**

### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[CreateConnectionProcessor.java][] ###

public void process() {
            Log.v(this, "process");
            clearTimeout();
            mAttemptRecords = new ArrayList<>();
            if (mCall.getTargetPhoneAccount() != null) {
                mAttemptRecords.add(new CallAttemptRecord(
                        mCall.getTargetPhoneAccount(), mCall.getTargetPhoneAccount()));
            }
            if (!mCall.isSelfManaged()) {
                adjustAttemptsForConnectionManager();
                adjustAttemptsForEmergency(mCall.getTargetPhoneAccount());
            }
            mAttemptRecordIterator = mAttemptRecords.iterator();
            attemptNextPhoneAccount();
        }

其中 attemptNextPhoneAccount 方法

private void attemptNextPhoneAccount() {
            Log.v(this, "attemptNextPhoneAccount");
            CallAttemptRecord attempt = null;
    
    
            if (mCallResponse != null && attempt != null) {
                Log.i(this, "Trying attempt %s", attempt);
                PhoneAccountHandle phoneAccount = attempt.connectionManagerPhoneAccount;
                mService = mRepository.getService(phoneAccount.getComponentName(),
                        phoneAccount.getUserHandle());
                if (mService == null) {
                    Log.i(this, "Found no connection service for attempt %s", attempt);
                    attemptNextPhoneAccount();
                } else {
                    mConnectionAttempt++;
                    mCall.setConnectionManagerPhoneAccount(attempt.connectionManagerPhoneAccount);
                    mCall.setTargetPhoneAccount(attempt.targetPhoneAccount);
                    mCall.setConnectionService(mService);
                    setTimeoutIfNeeded(mService, attempt);
                    if (mCall.isIncoming()) {
                        mService.createConnection(mCall, CreateConnectionProcessor.this);
                    } else {
                        // Start to create the connection for outgoing call after the ConnectionService
                        // of the call has gained the focus.
                        mCall.getConnectionServiceFocusManager().requestFocus(
                                mCall,
                                new CallsManager.RequestCallback(new CallsManager.PendingAction() {
                                    @Override
                                    public void performAction() {
                                        Log.d(this, "perform create connection");
                                        mService.createConnection(
                                                mCall,
                                                CreateConnectionProcessor.this);
                                    }
                                }));
    
                    }
                }
            } else {
                Log.v(this, "attemptNextPhoneAccount, no more accounts, failing");
                DisconnectCause disconnectCause = mLastErrorDisconnectCause != null ?
                        mLastErrorDisconnectCause : new DisconnectCause(DisconnectCause.ERROR);
                notifyCallConnectionFailure(disconnectCause);
            }
        }

核心代码：

private ConnectionServiceWrapper mService;   
                 
    if (mCall.isIncoming()) {
                        mService.createConnection(mCall, CreateConnectionProcessor.this);
                    }

void createConnection(final Call call, final CreateConnectionResponse response) {
     
        // 链接创建成功后 onSuccess 会被调用
        BindCallback callback = new BindCallback() {
            @Override
            public void onSuccess() {
     
                try {
                    /// M: For VoLTE @{
                    boolean isConferenceDial = call.isConferenceDial();
     
                    // 会议通话
                    if (isConferenceDial) {
                        logOutgoing("createConference(%s) via %s.", call, getComponentName());
                        mServiceInterface.createConference(
                                call.getConnectionManagerPhoneAccount(),
                                callId,
                                new ConnectionRequest(
                                        call.getTargetPhoneAccount(),
                                        call.getHandle(),
                                        extras,
                                        call.getVideoState()),
                                call.getConferenceParticipants(),
                                call.isIncoming());
     
                    // 非会议（拨打电话会走这里）
                    } else {
     
                        // 通过远程接口创建链接
                        mServiceInterface.createConnection(
                                call.getConnectionManagerPhoneAccount(),
                                callId,
                                new ConnectionRequest(
                                        call.getTargetPhoneAccount(),
                                        call.getHandle(),
                                        extras,
                                        call.getVideoState()),
                                call.isIncoming(),
                                call.isUnknown());
                    }
                    /// @}
                } catch (RemoteException e) {
     
                }
            }
     
            @Override
            public void onFailure() {
            }
        };
     
        mBinder.bind(callback, call);
    }

mBinder是Binder2对象，Binder2是ConnectionServiceWrapper的父类ServiceBinder内部类，所以此处调用的是的ServiceBinder的内部类的Binder2类的bind()方法，先new一个ServiceConnection对象，然后绑定一个远程服务端服务。如果绑定成功的话，在ServiceBinder的内部类ServiceBinderConnection的onServiceConnected()方法就被调用。  
在这里做了两件事：

>   
> 　　1）.通过setBinder()方法，回调ConnectionServiceWrapper的setServiceInterface()方法，通过mServiceInterface = IConnectionService.Stub.asInterface(binder);  
> 这行代码获取一个远程服务端的对象mServiceInterface 。  
> 　　2）、再通过调用handleSuccessfulConnection()方法回调callback 的onSuccess()方法，也就又回到ConnectionServiceWrapper的createConnection()方法里。调用ConnectionService.java里mBinder的createConnection()方法然后通过message传递调用createConnection()方法。

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[ServiceBinder.java][] ###

mBider 的bind 方法

void bind(BindCallback callback, Call call) {
     
                if (mServiceConnection == null) {
                    Intent serviceIntent = new Intent(mServiceAction).setComponent(mComponentName);
                    ServiceConnection connection = new ServiceBinderConnection(call);
     
                    // 进行绑定
                    if (mUserHandle != null) {
                        isBound = mContext.bindServiceAsUser(serviceIntent, connection, bindingFlags,
                                mUserHandle);
                    } else {
                        isBound = mContext.bindService(serviceIntent, connection, bindingFlags);
                    }
                    if (!isBound) {
                        handleFailedConnection();
                        return;
                    }
                } else {
                }
            }

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQwNTg3NTc1_size_16_color_FFFFFF_t_70][]

绑定成功后，ServiceBinderConnection 的 onServiceConnected 会触发

@Override
            public void onServiceConnected(ComponentName componentName, IBinder binder) {
                try {
     
                        if (binder != null) {
                            mServiceDeathRecipient = new ServiceDeathRecipient(componentName);
                            try {
                                binder.linkToDeath(mServiceDeathRecipient, 0);
                                mServiceConnection = this;
    // 会触发 ConnectionServiceWrapper.setServiceInterface  ==>  
    ConnectionServiceWrapper.addConnectionServiceAdapter 
    通过mServiceInterface，给绑定的服务，提供一个访问自己的接口
     
     
                                setBinder(binder);
     
    // 触发bind(BindCallback callback, Call call) 中 callback 的 onSuccess
     
                                handleSuccessfulConnection();
                            } catch (RemoteException e) {
                                Log.w(this, "onServiceConnected: %s died.");
                                if (mServiceDeathRecipient != null) {
                                    mServiceDeathRecipient.binderDied();
                                }
                            }
                        }
                    }
                } finally {
                    Log.endSession();
                }
            }

![20201116144956284.png][]

整个绑定过程，只做2件事，

一是给远程服务提供访问自己的接口，

二是利用远程接口创建一个通话链接。

这2件事都是跨进程进行的。远程服务访问自己的接口是 `ConnectionServiceWrapper.Adapter` , 是一个Binder。

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[ConnectionServiceWrapper.java][] ###

由内部类 Adapter 继承于 IConnectionServiceAdapter.Stub，可以看出会进行跨进程访问

public class ConnectionServiceWrapper extends ServiceBinder implements
            ConnectionServiceFocusManager.ConnectionServiceFocus {
     
        private final class Adapter extends IConnectionServiceAdapter.Stub {

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[ServiceBinder.java][] ###

调用ConnectionService.java里mBinder的createConnection()方法然后通过message传递调用createConnection()方法。

private void handleSuccessfulConnection() {
            // Make a copy so that we don't have a deadlock inside one of the callbacks.
            Set<BindCallback> callbacksCopy = new ArraySet<>();
            synchronized (mCallbacks) {
                callbacksCopy.addAll(mCallbacks);
                mCallbacks.clear();
            }
     
            for (BindCallback callback : callbacksCopy) {
                callback.onSuccess();
            }
        }

通过调用handleSuccessfulConnection()方法回调callback 的onSuccess()方法，也就又回到ConnectionServiceWrapper的createConnection()方法里。

1094      public void createConnection(final Call call, final CreateConnectionResponse response) {
    1095          Log.d(this, "createConnection(%s) via %s.", call, getComponentName());
    1096          BindCallback callback = new BindCallback() {
    1097              @Override
    1098              public void onSuccess() {
    1099                  String callId = mCallIdMapper.getCallId(call);
    1100                  mPendingResponses.put(callId, response);
    1101  
    ///---------//
     
    1146                                  
    1150          // 核心代码
    1151                  try {
    1152                      mServiceInterface.createConnection(
    1153                              call.getConnectionManagerPhoneAccount(),
    1154                              callId,
    1155                              connectionRequest,
    1156                              call.shouldAttachToExistingConnection(),
    1157                              call.isUnknown(),
    1158                              Log.getExternalSession());
    1159  
    1160                  } catch (RemoteException e) {
    1161                      Log.e(this, e, "Failure to createConnection -- %s", getComponentName());
    1162                      mPendingResponses.remove(callId).handleCreateConnectionFailure(
    1163                              new DisconnectCause(DisconnectCause.ERROR, e.toString()));
    1164                  }
    1165              }
    1166  
    1167              @Override
    1168              public void onFailure() {
    1169                  Log.e(this, new Exception(), "Failure to call %s", getComponentName());
    1170                  response.handleCreateConnectionFailure(new DisconnectCause(DisconnectCause.ERROR));
    1171              }
    1172          };
    1173  
    1174          mBinder.bind(callback, call);
    1175      }

private IConnectionService mServiceInterface;

**线中间的处理过程 和 拨号 流程一样**

**-----------------------------------------------------------------**

*  ### [frameworks][]/[base][]/[telecomm][]/[java][java 1]/[android][android 3]/[telecom][telecom 1]/[ConnectionService.java][] ###

createConnection()方法通过判断是来电还是去电分别创建不同的connection，

/**
         * This can be used by telecom to either create a new outgoing call or attach to an existing
         * incoming call. In either case, telecom will cycle through a set of services and call
         * createConnection util a connection service cancels the process or completes it successfully.
         */
        /** {@hide} */
        protected void createConnection(
                final PhoneAccountHandle callManagerAccount,
                final String callId,
                final ConnectionRequest request,
                boolean isIncoming,
                boolean isUnknown) {
            Log.d(this, "createConnection, callManagerAccount: %s, callId: %s, request: %s, " +
                            "isIncoming: %b, isUnknown: %b", callManagerAccount, callId, request,
                    isIncoming,
                    isUnknown);
    
            //判断是来电还是去电创造不同的connection
            Connection connection = isUnknown ? onCreateUnknownConnection(callManagerAccount, request)
                    : isIncoming ? onCreateIncomingConnection(callManagerAccount, request)
                    : onCreateOutgoingConnection(callManagerAccount, request);
            ...
    
            Log.d(this, "createConnection, calling handleCreateConnectionSuccessful %s", callId);
            //创建成功后调用
            mAdapter.handleCreateConnectionComplete(
                    callId,
                    request,
                    new ParcelableConnection(
                    ...
    
            if (isIncoming && request.shouldShowIncomingCallUi() &&
                    (connection.getConnectionProperties() & Connection.PROPERTY_SELF_MANAGED) ==
                            Connection.PROPERTY_SELF_MANAGED) {
                // Tell ConnectionService to show its incoming call UX.
                connection.onShowIncomingCallUi();
            }
            if (isUnknown) {
                triggerConferenceRecalculate();
            }
        }

> **此处先分析： onCreateIncomingConnection**
> 
> **运行完成后分析：mAdapter.handleCreateConnectionComplete**

其中：

public Connection onCreateIncomingConnection(
                PhoneAccountHandle connectionManagerPhoneAccount,
                ConnectionRequest request) {
            return null;
        }

当判断是来电时会通过 onCreateIncomingConnection 创建连接，直接跟进去发现是空实现，那么该方法的实现应该在该类的子类中，跟进到其子类TelephonyConnectionService中

*  ### [packages][]/[services][]/[Telephony][]/[src][src 1]/[com][com 1]/[android][android 1]/[services][services 1]/[telephony][telephony 2]/[TelephonyConnectionService.java][] ###

public class TelephonyConnectionService extends ConnectionService {

/**
     * Service for making GSM and CDMA connections.
     */
    public class TelephonyConnectionService extends ConnectionService 
    
        @Override
        public Connection onCreateIncomingConnection(
                PhoneAccountHandle connectionManagerPhoneAccount,
                ConnectionRequest request) {
            ...
            Phone phone = getPhoneForAccount(accountHandle, isEmergency);
            ...
            Call call = phone.getRingingCall();
    
            com.android.internal.telephony.Connection originalConnection =
                    call.getState() == Call.State.WAITING ?
                        call.getLatestConnection() : call.getEarliestConnection();
            ...
            Connection connection =
                    createConnectionFor(phone, originalConnection, false /* isOutgoing */,
                            request.getAccountHandle(), request.getTelecomCallId(),
                            request.getAddress(), videoState);
    
            ...
        }

跳转到 createConnectionFor 方法中

private TelephonyConnection createConnectionFor(
                Phone phone,
                com.android.internal.telephony.Connection originalConnection,
                boolean isOutgoing,
                PhoneAccountHandle phoneAccountHandle,
                String telecomCallId,
                Uri address,
                int videoState) {
            TelephonyConnection returnConnection = null;
            int phoneType = phone.getPhoneType();
            if (phoneType == TelephonyManager.PHONE_TYPE_GSM) {
                returnConnection = new GsmConnection(originalConnection, telecomCallId, isOutgoing);
            } else if (phoneType == TelephonyManager.PHONE_TYPE_CDMA) {
                boolean allowsMute = allowsMute(phone);
                returnConnection = new CdmaConnection(originalConnection, mEmergencyTonePlayer,
                        allowsMute, isOutgoing, telecomCallId);
            }
            if (returnConnection != null) {
                // Listen to Telephony specific callbacks from the connection
                returnConnection.addTelephonyConnectionListener(mTelephonyConnectionListener);
                returnConnection.setVideoPauseSupported(
                        TelecomAccountRegistry.getInstance(this).isVideoPauseSupported(
                                phoneAccountHandle));
                returnConnection.setManageImsConferenceCallSupported(
                        TelecomAccountRegistry.getInstance(this).isManageImsConferenceCallSupported(
                                phoneAccountHandle));
                returnConnection.setShowPreciseFailedCause(
                        TelecomAccountRegistry.getInstance(this).isShowPreciseFailedCause(
                                phoneAccountHandle));
            }
            return returnConnection;
        }

**继续 分析 mAdapter.handleCreateConnectionComplete**

**这里通过AIDL进行通信，搜索 IConnectionServiceAdapter.Stub，****跟进到 ConnectionServiceWrapper**

*  ### [frameworks][]/[base][]/[telecomm][]/[java][java 1]/[android][android 3]/[telecom][telecom 1]/[ConnectionServiceAdapter.java][] ###

private final class Adapter extends IConnectionServiceAdapter.Stub {
    
            @Override
            public void handleCreateConnectionComplete(String callId, ConnectionRequest request,
                    ParcelableConnection connection, Session.Info sessionInfo) {
                Log.startSession(sessionInfo, LogUtils.Sessions.CSW_HANDLE_CREATE_CONNECTION_COMPLETE);
                long token = Binder.clearCallingIdentity();
                try {
                    synchronized (mLock) {
                        logIncoming("handleCreateConnectionComplete %s", callId);
                        ConnectionServiceWrapper.this
                                .handleCreateConnectionComplete(callId, request, connection);

**继续跟进handleCreateConnectionComplete**

private void handleCreateConnectionComplete(
                String callId,
                ConnectionRequest request,
                ParcelableConnection connection) {
            // TODO: Note we are not using parameter "request", which is a side effect of our tacit
            // assumption that we have at most one outgoing connection attempt per ConnectionService.
            // This may not continue to be the case.
            if (connection.getState() == Connection.STATE_DISCONNECTED) {
                // A connection that begins in the DISCONNECTED state is an indication of
                // failure to connect; we handle all failures uniformly
                Call foundCall = mCallIdMapper.getCall(callId);
                if (foundCall != null) {
                    // The post-dial digits are created when the call is first created.  Normally
                    // the ConnectionService is responsible for stripping them from the address, but
                    // since a failed connection will not have done this, we could end up with duplicate
                    // post-dial digits.
                    foundCall.clearPostDialDigits();
                }
                removeCall(callId, connection.getDisconnectCause());
            } else {
                // Successful connection
                if (mPendingResponses.containsKey(callId)) {
                    mPendingResponses.remove(callId)
                            .handleCreateConnectionSuccess(mCallIdMapper, connection);
                }
            }
        }

mPendingResponses是hashMap容器，每次在 createConnection 的时候会将对象加入该容器，如果此时connection还未断开的，会移除此connection，调用hanleCreateConnectionSuccess方法。  
往上追溯CreateConnectionResponse，是一个接口，跟踪到mService.createConnection(mCall, this);

public class CreateConnectionProcessor implements CreateConnectionResponse {

CreateConnectionProcessor.java会把自身传入，发现该类也实现了 CreateConnectionResponse ，所以这里的 handleCreateConnectionSuccess  
调用的是这个类里面的方法

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[CreateConnectionProcessor.java][] ###

private CreateConnectionResponse mCallResponse;
    
        @Override
        public void handleCreateConnectionSuccess(
                CallIdMapper idMapper,
                ParcelableConnection connection) {
            if (mCallResponse == null) {
                // Nobody is listening for this connection attempt any longer; ask the responsible
                // ConnectionService to tear down any resources associated with the call
                mService.abort(mCall);
            } else {
                // Success -- share the good news and remember that we are no longer interested
                // in hearing about any more attempts
    // 核心代码
                mCallResponse.handleCreateConnectionSuccess(idMapper, connection);
                mCallResponse = null;
                // If there's a timeout running then don't clear it. The timeout can be triggered
                // after the call has successfully been created but before it has become active.
            }
        }

还是 CreateConnectionResponse 接口

实现的是 Call 对象 ，Call 也实现了该接口

public class Call implements CreateConnectionResponse, EventManager.Loggable,
    84          ConnectionServiceFocusManager.CallFocus {

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[Call.java][] ###

public void handleCreateConnectionSuccess(
                CallIdMapper idMapper,
                ParcelableConnection connection) {
            Log.v(this, "handleCreateConnectionSuccessful %s", connection);
            setTargetPhoneAccount(connection.getPhoneAccount());
            setHandle(connection.getHandle(), connection.getHandlePresentation());
            setCallerDisplayName(
                    connection.getCallerDisplayName(), connection.getCallerDisplayNamePresentation());
    
            setConnectionCapabilities(connection.getConnectionCapabilities());
            setConnectionProperties(connection.getConnectionProperties());
            setIsVoipAudioMode(connection.getIsVoipAudioMode());
            setSupportedAudioRoutes(connection.getSupportedAudioRoutes());
            setVideoProvider(connection.getVideoProvider());
            setVideoState(connection.getVideoState());
            setRingbackRequested(connection.isRingbackRequested());
            setStatusHints(connection.getStatusHints());
            putExtras(SOURCE_CONNECTION_SERVICE, connection.getExtras());
    
            mConferenceableCalls.clear();
            for (String id : connection.getConferenceableConnectionIds()) {
                mConferenceableCalls.add(idMapper.getCall(id));
            }
    
            switch (mCallDirection) {
                case CALL_DIRECTION_INCOMING:
    
                    for (Listener l : mListeners) {
    // 此处触发了回调
                        l.onSuccessfulIncomingCall(this);
                    }
                    break;
    。。。。。

这里根据来电类型，触发回调，监听者会收到通知

,之前在CallManager中执行 processIncomingCallIntent 方法创建Call的时候就添加了监听，所以最后会回调到CallsManager中

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[CallsManager.java][] ###

可以看出CallsManager的管理作用，创建Calls并添加监听，在完成Call的相关初始化后进行进一步处理，其实就是传递消息到别的的地方去。

public void onSuccessfulIncomingCall(Call incomingCall) {
            Log.d(this, "onSuccessfulIncomingCall");
            PhoneAccount phoneAccount = mPhoneAccountRegistrar.getPhoneAccountUnchecked(
                    incomingCall.getTargetPhoneAccount());
            Bundle extras =
                phoneAccount == null || phoneAccount.getExtras() == null
                    ? new Bundle()
                    : phoneAccount.getExtras();
            if (incomingCall.hasProperty(Connection.PROPERTY_EMERGENCY_CALLBACK_MODE) ||
                    incomingCall.isSelfManaged() ||
                    extras.getBoolean(PhoneAccount.EXTRA_SKIP_CALL_FILTERING)) {
                Log.i(this, "Skipping call filtering for %s (ecm=%b, selfMgd=%b, skipExtra=%b)",
                        incomingCall.getId(),
                        incomingCall.hasProperty(Connection.PROPERTY_EMERGENCY_CALLBACK_MODE),
                        incomingCall.isSelfManaged(),
                        extras.getBoolean(PhoneAccount.EXTRA_SKIP_CALL_FILTERING));
                onCallFilteringComplete(incomingCall, new CallFilteringResult(true, false, true, true));
                incomingCall.setIsUsingCallFiltering(false);
                return;
            }
    
            incomingCall.setIsUsingCallFiltering(true);
    //迭代器模式
            List<IncomingCallFilter.CallFilter> filters = new ArrayList<>();
            filters.add(new DirectToVoicemailCallFilter(mCallerInfoLookupHelper));
            filters.add(new AsyncBlockCheckFilter(mContext, new BlockCheckerAdapter(),
                    mCallerInfoLookupHelper, null));
            filters.add(new CallScreeningServiceController(mContext, this, mPhoneAccountRegistrar,
                    new ParcelableCallUtils.Converter(), mLock,
                    new TelecomServiceImpl.SettingsSecureAdapterImpl(), mCallerInfoLookupHelper,
                    new CallScreeningServiceHelper.AppLabelProxy() {
                        @Override
                        public CharSequence getAppLabel(String packageName) {
                            PackageManager pm = mContext.getPackageManager();
                            try {
                                ApplicationInfo info = pm.getApplicationInfo(packageName, 0);
                                return pm.getApplicationLabel(info);
                            } catch (PackageManager.NameNotFoundException nnfe) {
                                Log.w(this, "Could not determine package name.");
                            }
    
                            return null;
                        }
                    }));
    //IncomingCallFilter创建并执行 performFiltering
            new IncomingCallFilter(mContext, this, incomingCall, mLock,
                    mTimeoutsAdapter, filters).performFiltering();
        }

IncomingCallFilter创建并执行 performFiltering

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[callfiltering][]/[IncomingCallFilter.java][] ###

public void performFiltering() {
            Log.addEvent(mCall, LogUtils.Events.FILTERING_INITIATED);
            for (CallFilter filter : mFilters) {
                //遍历调用，依次执行异步查询方法
                filter.startFilterLookup(mCall, this);
            }
            // synchronized to prevent a race on mResult and to enter into Telecom.
            mHandler.postDelayed(new Runnable("ICF.pFTO", mTelecomLock) { // performFiltering time-out
                @Override
                public void loggedRun() {
                    if (mIsPending) {
                        //超时处理的方法
                        Log.i(IncomingCallFilter.this, "Call filtering has timed out.");
                        Log.addEvent(mCall, LogUtils.Events.FILTERING_TIMED_OUT);
                        //回CallsManager中的监听事件
                        mListener.onCallFilteringComplete(mCall, mResult);
                        mIsPending = false;
                    }
                }
            }.prepare(), mTimeoutsAdapter.getCallScreeningTimeoutMillis(mContext.getContentResolver()));
        }

**如果没有超时则在异步查询结束后，会通过回调方法将CallFilterResult传回onCallFilteringComplete.**

public void onCallFilteringComplete(Call call, CallFilteringResult result) {
            synchronized (mTelecomLock) { // synchronizing to prevent race on mResult
                mNumPendingFilters--;
                mResult = result.combine(mResult);
                if (mNumPendingFilters == 0) {
                    // synchronized on mTelecomLock to enter into Telecom.
                    mHandler.post(new Runnable("ICF.oCFC", mTelecomLock) {
                        @Override
                        public void loggedRun() {
                            if (mIsPending) {
                                Log.addEvent(mCall, LogUtils.Events.FILTERING_COMPLETED, mResult);
                                mListener.onCallFilteringComplete(mCall, mResult);
                                mIsPending = false;
                            }
                        }
                    }.prepare());
                }
            }
        }

**然后， 回到CallsManager中进行onCallFilteringComplete处理**

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[CallsManager.java][] ###

@Override
        public void onCallFilteringComplete(Call incomingCall, CallFilteringResult result) {
            ...
            if (incomingCall.getState() != CallState.DISCONNECTED &&
                    incomingCall.getState() != CallState.DISCONNECTING &&
                    incomingCall.getState() != CallState.ACTIVE) {
                //设置Call状态为Ring
                setCallState(incomingCall, CallState.RINGING,
                        result.shouldAllowCall ? "successful incoming call" : "blocking call");
            } else {
                Log.i(this, "onCallFilteringCompleted: call already disconnected.");
                return;
            }
    
            if (result.shouldAllowCall) {
                if (MtkUtil.isInSingleVideoCallMode(incomingCall)) {
                    ...
                }
    
                if (hasMaximumManagedRingingCalls(incomingCall)) {
                    if (shouldSilenceInsteadOfReject(incomingCall)) {
                        incomingCall.silence();
                    } else {
                        Log.i(this, "onCallFilteringCompleted: Call rejected! " +
                                "Exceeds maximum number of ringing calls.");
                        rejectCallAndLog(incomingCall);
                    }
    
                } else {
                    //添加Call
                    addCall(incomingCall);
                }
            } else {
                if (result.shouldReject) {
                    Log.i(this, "onCallFilteringCompleted: blocked call, rejecting.");
                    incomingCall.reject(false, null);
                }
                if (result.shouldAddToCallLog) {
                    Log.i(this, "onCallScreeningCompleted: blocked call, adding to call log.");
                    if (result.shouldShowNotification) {
                        Log.w(this, "onCallScreeningCompleted: blocked call, showing notification.");
                    }
                    //添加通话记录
                    mCallLogManager.logCall(incomingCall, Calls.MISSED_TYPE,
                            result.shouldShowNotification);
                } else if (result.shouldShowNotification) {
                    Log.i(this, "onCallScreeningCompleted: blocked call, showing notification.");
                    mMissedCallNotifier.showMissedCallNotification(
                            new MissedCallNotifier.CallInfo(incomingCall));
                }
            }
        }

跟踪到 addCall 方法

3207      @VisibleForTesting
    3208      public void addCall(Call call) {
    3209          Trace.beginSection("addCall");
    3210          Log.v(this, "addCall(%s)", call);
    3211          call.addListener(this);
    3212          mCalls.add(call);
    3213  
    3214          // Specifies the time telecom finished routing the call. This is used by the dialer for
    3215          // analytics.
    3216          Bundle extras = call.getIntentExtras();
    3217          extras.putLong(TelecomManager.EXTRA_CALL_TELECOM_ROUTING_END_TIME_MILLIS,
    3218                  SystemClock.elapsedRealtime());
    3219  
    3220          updateCanAddCall();
    3221          // onCallAdded for calls which immediately take the foreground (like the first call).
    3222          for (CallsManagerListener listener : mListeners) {
    3223              if (LogUtils.SYSTRACE_DEBUG) {
    3224                  Trace.beginSection(listener.getClass().toString() + " addCall");
    3225              }
    3226              listener.onCallAdded(call);
    3227              if (LogUtils.SYSTRACE_DEBUG) {
    3228                  Trace.endSection();
    3229              }
    3230          }
    3231          Trace.endSection();
    3232      }

> //通知监听Call添加的观察者
> 
> listener.onCallAdded(call);

添加的观察者，和拨号一样，主要是 CllAudilManager （负责响铃）和 InCallController

mListeners.add(mInCallWakeLockController);
            mListeners.add(statusBarNotifier);
            mListeners.add(mCallLogManager);
            mListeners.add(mPhoneStateBroadcaster);
            mListeners.add(mInCallController);
            mListeners.add(mCallAudioManager);
            mListeners.add(mCallRecordingTonePlayer);
            mListeners.add(missedCallNotifier);
            mListeners.add(mHeadsetMediaButton);
            mListeners.add(mProximitySensorManager);

其中：

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[CallAudioManager.java][] ###

private void onCallEnteringRinging() {
    641          if (mRingingCalls.size() == 1) {
    642              mCallAudioModeStateMachine.sendMessageWithArgs(
    643                      CallAudioModeStateMachine.NEW_RINGING_CALL,
    644                      makeArgsForModeStateMachine());
    645          }
    646      }

*  ### [packages][]/[services][]/[Telecomm][]/[src][src 2]/[com][com 2]/[android][android 2]/[server][]/[telecom][]/[InCallController.java][] ###

查看 InCallController 的 onCallAdded 方法

@Override
        public void onCallAdded(Call call) {
            if (!isBoundAndConnectedToServices()) {
                bindToServices(call);
            } else {
                // We are bound, and we are connected.
                adjustServiceBindingsForEmergency();
    
                // This is in case an emergency call is added while there is an existing call.
                mEmergencyCallHelper.maybeGrantTemporaryLocationPermission(call,
                        mCallsManager.getCurrentUserHandle());
    
                //添加Call
                addCall(call);
    
                List<ComponentName> componentsUpdated = new ArrayList<>();
                for (Map.Entry<InCallServiceInfo, IInCallService> entry : mInCallServices.entrySet()) {
                    InCallServiceInfo info = entry.getKey();
    
                    if (call.isExternalCall() && !info.isExternalCallsSupported()) {
                        continue;
                    }
    
                    if (call.isSelfManaged() && !info.isSelfManagedCallsSupported()) {
                        continue;
                    }
    
                    // Only send the RTT call if it's a UI in-call service
                    boolean includeRttCall = info.equals(mInCallServiceConnection.getInfo());
    
                    componentsUpdated.add(info.getComponentName());
                    IInCallService inCallService = entry.getValue();
    
                    ParcelableCall parcelableCall = ParcelableCallUtils.toParcelableCall(call,
                            true /* includeVideoProvider */, mCallsManager.getPhoneAccountRegistrar(),
                            info.isExternalCallsSupported(), includeRttCall);
                    try {
                        //AIDL调用远程的addCall方法
                        inCallService.addCall(parcelableCall);
                    } catch (RemoteException ignored) {
                    }
                }
                Log.i(this, "Call added to components: %s", componentsUpdated);
            }
        }

### **Telecomm Framework** ###

*  ### [frameworks][]/[base][]/[telecomm][]/[java][java 1]/[android][android 3]/[telecom][telecom 1]/[InCallService.java][] ###

291      /** Manages the binder calls so that the implementor does not need to deal with it. */
    292      private final class InCallServiceBinder extends IInCallService.Stub {
    293          @Override
    294          public void setInCallAdapter(IInCallAdapter inCallAdapter) {
    295              mHandler.obtainMessage(MSG_SET_IN_CALL_ADAPTER, inCallAdapter).sendToTarget();
    296          }
    297  
    298          @Override
    299          public void addCall(ParcelableCall call) {
    300              mHandler.obtainMessage(MSG_ADD_CALL, call).sendToTarget();
    301          }

**继续跟进**MSG\_ADD\_CALL**消息的处理**

205      /** Default Handler used to consolidate binder method calls onto a single thread. */
    206      private final Handler mHandler = new Handler(Looper.getMainLooper()) {
    207          @Override
    208          public void handleMessage(Message msg) {
    209              if (mPhone == null && msg.what != MSG_SET_IN_CALL_ADAPTER) {
    210                  return;
    211              }
    212  
    213              switch (msg.what) {
    214                  case MSG_SET_IN_CALL_ADAPTER:
    215                      String callingPackage = getApplicationContext().getOpPackageName();
    216                      mPhone = new Phone(new InCallAdapter((IInCallAdapter) msg.obj), callingPackage,
    217                              getApplicationContext().getApplicationInfo().targetSdkVersion);
    218                      mPhone.addListener(mPhoneListener);
    219                      onPhoneCreated(mPhone);
    220                      break;
    221                  case MSG_ADD_CALL:
    222                      mPhone.internalAddCall((ParcelableCall) msg.obj);
    223                      break;

**继续跟进internalAddCall**

*  ### [frameworks][]/[base][]/[telecomm][]/[java][java 1]/[android][android 3]/[telecom][telecom 1]/[Phone.java][] ###

final void internalAddCall(ParcelableCall parcelableCall) {
            //创建Call
            Call call = new Call(this, parcelableCall.getId(), mInCallAdapter,
                    parcelableCall.getState(), mCallingPackage, mTargetSdkVersion);
    
            mCallByTelecomCallId.put(parcelableCall.getId(), call);
            //添加到列表中
            mCalls.add(call);
            checkCallTree(parcelableCall);
            call.internalUpdate(parcelableCall, mCallByTelecomCallId);
            //调用phone的监听者的onCallAdded
            fireCallAdded(call);
         }
    
        private void fireCallAdded(Call call) {
            for (Listener listener : mListeners) {
                listener.onCallAdded(this, call);
            }
        }

**在 InCallService 中handleMessage处理MSG\_SET\_IN\_CALL\_ADAPTER消息的时候就注册了监听，这里继续跟进到InCallService中的实现去**

*  ### [frameworks][]/[base][]/[telecomm][]/[java][java 1]/[android][android 3]/[telecom][telecom 1]/[InCallService.java][] ###

private Phone.Listener mPhoneListener = new Phone.Listener() {
            /** ${inheritDoc} */
            @Override
            public void onAudioStateChanged(Phone phone, AudioState audioState) {
                InCallService.this.onAudioStateChanged(audioState);
            }
    。。。。。//
    
    
            /** ${inheritDoc} */
            @Override
            public void onCallAdded(Phone phone, Call call) {
                InCallService.this.onCallAdded(call);
            }

这其实是个空实现，具体实现是在子类中，继续跟进到子类 InCallServiceImpl 中分析

*  ### [packages][]/[apps][]/[Dialer][]/[java][java 2]/[com][com 3]/[android][android 4]/[incallui][]/[InCallServiceImpl.java][] ###

### **Dialer** 层 ###

public class InCallServiceImpl extends InCallService {
    
      private ReturnToCallController returnToCallController;
      private CallList.Listener feedbackListener;
      // We only expect there to be one speakEasyCallManager to be instantiated at a time.
      // We did not use a singleton SpeakEasyCallManager to avoid holding on to state beyond the
      // lifecycle of this service, because the singleton is associated with the state of the
      // Application, not this service.
      private SpeakEasyCallManager speakEasyCallManager;
    
      @Override
      public void onCallAudioStateChanged(CallAudioState audioState) {
        Trace.beginSection("InCallServiceImpl.onCallAudioStateChanged");
        AudioModeProvider.getInstance().onAudioStateChanged(audioState);
        Trace.endSection();
      }
    
    ///-----------
    
      @Override
      public void onCallAdded(Call call) {
        Trace.beginSection("InCallServiceImpl.onCallAdded");
        InCallPresenter.getInstance().onCallAdded(call);
        Trace.endSection();
      }

跟踪到这里可以看到其所在目录是Dialer下的inCallUI了，这就到dialer层了，如果查看Diler的清单文件可以发现其有android.telecom.InCallService声明

*  ### [packages][]/[apps][]/[Dialer][]/[java][java 2]/[com][com 3]/[android][android 4]/[incallui][]/[InCallPresenter.java][] ###

public void onCallAdded(final android.telecom.Call call) {
        LatencyReport latencyReport = new LatencyReport(call);
        if (shouldAttemptBlocking(call)) {
          maybeBlockCall(call, latencyReport);
        } else {
          if (call.getDetails().hasProperty(CallCompat.Details.PROPERTY_IS_EXTERNAL_CALL)) {
            mExternalCallList.onCallAdded(call);
          } else {
            latencyReport.onCallBlockingDone();
            //CallList（Call的维护列表）调用onCallAdded
            mCallList.onCallAdded(mContext, call, latencyReport);
          }
        }
    
        // Since a call has been added we are no longer waiting for Telecom to send us a call.
        setBoundAndWaitingForOutgoingCall(false, null);
        call.registerCallback(mCallCallback);
      }

*  ### [packages][]/[apps][]/[Dialer][]/[java][java 2]/[com][com 3]/[android][android 4]/[incallui][]/[call][]/[CallList.java][] ###

public void onCallAdded(
          final Context context, final android.telecom.Call telecomCall, LatencyReport latencyReport) {
        Trace.beginSection("onCallAdded");
        ...
         if (call.getState() == DialerCall.State.INCOMING
                || call.getState() == DialerCall.State.CALL_WAITING) {
              //来电调用
              onIncoming(call);
            } else {
              dialerCallListener.onDialerCallUpdate();
        }
        ...
    }

**跟踪 onIncoming 方法**

/** Called when a single call has changed. */
      private void onIncoming(DialerCall call) {
        Trace.beginSection("CallList.onIncoming");
        if (updateCallInMap(call)) {
          LogUtil.i("CallList.onIncoming", String.valueOf(call));
        }
    
        for (Listener listener : listeners) {
          listener.onIncomingCall(call);
        }
        Trace.endSection();
      }

*  ### [packages][]/[apps][]/[Dialer][]/[java][java 2]/[com][com 3]/[android][android 4]/[incallui][]/[InCallPresenter.java][] ###

InCallPresenter 监听来电状态

可以看出 InCallPresenter 实现了 CallList.Listener 的接口，所以可以监听来电的状态

public class InCallPresenter implements CallList.Listener, AudioModeProvider.AudioModeListener {

**跟踪到 onCallListChange 方法**

@Override
      public void onCallListChange(CallList callList) {
        Trace.beginSection("InCallPresenter.onCallListChange");
        if (inCallActivity != null && inCallActivity.isInCallScreenAnimating()) {
          awaitingCallListUpdate = true;
          Trace.endSection();
          return;
        }
        if (callList == null) {
          Trace.endSection();
          return;
        }
    
        awaitingCallListUpdate = false;
    
        InCallState newState = getPotentialStateFromCallList(callList);
        InCallState oldState = inCallState;
        LogUtil.d(
            "InCallPresenter.onCallListChange",
            "onCallListChange oldState= " + oldState + " newState=" + newState);
    
        // If the user placed a call and was asked to choose the account, but then pressed "Home", the
        // incall activity for that call will still exist (even if it's not visible). In the case of
        // an incoming call in that situation, just disconnect that "waiting for account" call and
        // dismiss the dialog. The same activity will be reused to handle the new incoming call. See
        // a bug for more details.
        DialerCall waitingForAccountCall;
        if (newState == InCallState.INCOMING
            && (waitingForAccountCall = callList.getWaitingForAccountCall()) != null) {
          waitingForAccountCall.disconnect();
          // The InCallActivity might be destroyed or not started yet at this point.
          if (isActivityStarted()) {
            inCallActivity.dismissPendingDialogs();
          }
        }
    
    // 核心代码
        newState = startOrFinishUi(newState);
        LogUtil.d(
            "InCallPresenter.onCallListChange", "onCallListChange newState changed to " + newState);
    
        // Set the new state before announcing it to the world
        LogUtil.i(
            "InCallPresenter.onCallListChange",
            "Phone switching state: " + oldState + " -> " + newState);
        inCallState = newState;
    
        // Foreground call changed
        DialerCall primary = null;
        if (newState == InCallState.INCOMING) {
          primary = callList.getIncomingCall();
        } else if (newState == InCallState.PENDING_OUTGOING || newState == InCallState.OUTGOING) {
          primary = callList.getOutgoingCall();
          if (primary == null) {
            primary = callList.getPendingOutgoingCall();
          }
        } else if (newState == InCallState.INCALL) {
          primary = getCallToDisplay(callList, null, false);
        }
        if (primary != null) {
          onForegroundCallChanged(primary);
    
        }
    
        // notify listeners of new state
        for (InCallStateListener listener : listeners) {
          LogUtil.d(
              "InCallPresenter.onCallListChange",
              "Notify " + listener + " of state " + inCallState.toString());
          listener.onStateChange(oldState, inCallState, callList);
        }
    
    
        if (isActivityStarted()) {
          final boolean hasCall =
              callList.getActiveOrBackgroundCall() != null || callList.getOutgoingCall() != null;
          inCallActivity.dismissKeyguard(hasCall);
        }
    
    
        Trace.endSection();
      }

**继续跟踪 startOrFinishUi 方法**

private InCallState startOrFinishUi(InCallState newState) {
    
        if ((showCallUi || showAccountPicker) && !shouldStartInBubbleMode()) {
          LogUtil.i("InCallPresenter.startOrFinishUi", "Start in call UI");
    // 展示来电界面
          showInCall(false /* showDialpad */, !showAccountPicker /* newOutgoingCall */);
        } else if (newState == InCallState.INCOMING) {
          LogUtil.i("InCallPresenter.startOrFinishUi", "Start Full Screen in call UI");
    
          try {
            PowerManager pm = (PowerManager) context.getSystemService(Context.POWER_SERVICE);
            PowerHALManager powerHALManager = new PowerHALManager(context, new Handler());
            PowerHALManager.PowerHintScene sceneIncall = powerHALManager.createPowerHintScene(
                    "InCall: InCallPresenter", PowerHintVendorSprd.POWER_HINT_VENDOR_RADIO_CALL, null);
            if (sceneIncall != null && !pm.isScreenOn()) {
              Log.i(this, "power Hint POWER_HINT_VENDOR_RADIO_CALL");
              sceneIncall.acquire(1000);
            }
          } catch (java.lang.NoClassDefFoundError e) {
            LogUtil.e("InCallPresenter.startOrFinishUi", "Exception:" + e.getMessage());
          } catch (java.util.NoSuchElementException e) {
            LogUtil.e("InCallPresenter.startOrFinishUi", "Exception:" + e.getMessage());
          } catch (Exception e) {
            LogUtil.e("InCallPresenter.startOrFinishUi", "Exception:" + e.getMessage());
          }
    
        } else if (newState == InCallState.NO_CALLS) {
          // The new state is the no calls state.  Tear everything down.
          inCallState = newState;
          attemptFinishActivity();
          attemptCleanup();
        }

**跟踪 showInCall 方法**

public void showInCall(boolean showDialpad, boolean newOutgoingCall) {
        LogUtil.i("InCallPresenter.showInCall", "Showing InCallActivity");
        context.startActivity(
            InCallActivity.getIntent(context, showDialpad, newOutgoingCall, false /* forFullScreen */));
      }

至此，显示来电界面。

MO 是从Dialer 发起，MT是从Modem发起。所以两个流程最大的差别也就是如何开始创建Call & connection。当准备开始创建和创建完成后，MO & MT在流程上几乎是没有差异的，都是一些Call & connection的控制，然后通过UI显示出来。

**总的来电各层之间的流程：**

> RIL→TelephonyFramework →TeleponyService→ TeleComService→
> 
> TeleComFramework→ TeleComService→TeleComFramework-->InCallUI

[75cc87e964768b68a9d7181d659f4437.png]: /images/20221024/23cdf36e74ca4de690696d13c76d6e34.png
[frameworks]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/
[opt]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/
[telephony]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/
[src]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/
[java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/java/
[com]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/java/com/
[android]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/java/com/android/
[internal]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/java/com/android/internal/
[telephony 1]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/java/com/android/internal/telephony/
[RIL.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/java/com/android/internal/telephony/RIL.java
[RadioIndication.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/java/com/android/internal/telephony/RadioIndication.java
[20201118140822799.png]: /images/20221024/4cbde253f54648749c011acc6c50e893.png
[GsmCdmaCallTracker.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/java/com/android/internal/telephony/GsmCdmaCallTracker.java
[CallTracker.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/java/com/android/internal/telephony/CallTracker.java
[RadioResponse.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/opt/telephony/src/java/com/android/internal/telephony/RadioResponse.java
[packages]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/
[services]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/
[Telephony]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telephony/
[src 1]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telephony/src/
[com 1]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telephony/src/com/
[android 1]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telephony/src/com/android/
[services 1]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telephony/src/com/android/services/
[telephony 2]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telephony/src/com/android/services/telephony/
[PstnIncomingCallNotifier.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telephony/src/com/android/services/telephony/PstnIncomingCallNotifier.java
[Telecomm]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/
[src 2]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/
[com 2]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/
[android 2]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/
[server]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/
[telecom]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/
[TelecomServiceImpl.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/TelecomServiceImpl.java
[CallIntentProcessor.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/CallIntentProcessor.java
[20201118155618163.png]: /images/20221024/14fb69a6a96b4b618aa84a85ef11dd34.png
[CallsManager.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/CallsManager.java
[20201118155736505.png]: /images/20221024/c7b0557dc91a4986a98a204e13a8d2ce.png
[20201118155755813.png]: /images/20221024/008193f67b064bbca8ad6dae831c342b.png
[Call.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/Call.java
[CreateConnectionProcessor.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/CreateConnectionProcessor.java
[ServiceBinder.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/ServiceBinder.java
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzQwNTg3NTc1_size_16_color_FFFFFF_t_70]: /images/20221024/7706bafba2cf4f068fb93e5a66b3f394.png
[20201116144956284.png]: /images/20221024/75a1f79218a245ada5f015c80e155813.png
[ConnectionServiceWrapper.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/ConnectionServiceWrapper.java
[base]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/base/
[telecomm]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/base/telecomm/
[java 1]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/base/telecomm/java/
[android 3]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/base/telecomm/java/android/
[telecom 1]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/base/telecomm/java/android/telecom/
[ConnectionService.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/base/telecomm/java/android/telecom/ConnectionService.java
[TelephonyConnectionService.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telephony/src/com/android/services/telephony/TelephonyConnectionService.java
[ConnectionServiceAdapter.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/base/telecomm/java/android/telecom/ConnectionServiceAdapter.java
[callfiltering]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/callfiltering/
[IncomingCallFilter.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/callfiltering/IncomingCallFilter.java
[CallAudioManager.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/CallAudioManager.java
[InCallController.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/services/Telecomm/src/com/android/server/telecom/InCallController.java
[InCallService.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/base/telecomm/java/android/telecom/InCallService.java
[Phone.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/frameworks/base/telecomm/java/android/telecom/Phone.java
[apps]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/apps/
[Dialer]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/apps/Dialer/
[java 2]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/apps/Dialer/java/
[com 3]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/apps/Dialer/java/com/
[android 4]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/apps/Dialer/java/com/android/
[incallui]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/apps/Dialer/java/com/android/incallui/
[InCallServiceImpl.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/apps/Dialer/java/com/android/incallui/InCallServiceImpl.java
[InCallPresenter.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/apps/Dialer/java/com/android/incallui/InCallPresenter.java
[call]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/apps/Dialer/java/com/android/incallui/call/
[CallList.java]: http://10.0.1.79:8081/xref/sprdroid10_trunk_20a/packages/apps/Dialer/java/com/android/incallui/call/CallList.java