Nginx高可用集群构建（Keepalived+Haproxy+Nginx）

冷不防 2022-10-15 07:59 174阅读 0赞

**1、组件及实现的功能**

*  Keepalived：实现对Haproxy服务的高可用，并采用双主模型配置;
 *  Haproxy：实现对Nginx的负载均衡和读写分离;
 *  Nginx：实现对HTTP请求的高速处理;

**2、架构设计图**

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70][]

**3、Keepalived部署**

在两个节点上都需要执行安装keepalived，命令如下：

$ yum -y install keepalived

修改 172.16.25.109 节点上 keepalived.conf 文件配置，命令如下

$ vim /etc/keepalived/keepalived.conf

修改后的内容如下：

同理修改 172.16.25.110 节点上 keepalived.conf 配置，内容如下：

! Configuration File for keepalived
    global_defs {
       notification_email {
             root@localhost
       }
       notification_email_from admin@lnmmp.com
       smtp_connect_timeout 3
       smtp_server 127.0.0.1
       router_id LVS_DEVEL
    }
    vrrp_script chk_maintaince_down {
       script "[[ -f /etc/keepalived/down ]] && exit 1 || exit 0"
       interval 1
       weight 2
    }
    vrrp_script chk_haproxy {
        script "killall -0 haproxy"
        interval 1
        weight 2
    }
    vrrp_instance VI_1 {
        interface eth0
        state BACKUP
        priority 99
        virtual_router_id 125
        garp_master_delay 1
        authentication {
            auth_type PASS
            auth_pass 1e3459f77aba4ded
        }
        track_interface {
           eth0
        }
        virtual_ipaddress {
            172.16.25.10/16 dev eth0 label eth0:0
        }
        track_script {
            chk_haproxy
    chk_maintaince_down
        }
        notify_master "/etc/keepalived/notify.sh master 172.16.25.10"
        notify_backup "/etc/keepalived/notify.sh backup 172.16.25.10"
        notify_fault "/etc/keepalived/notify.sh fault 172.16.25.10"
    }
    vrrp_instance VI_2 {
        interface eth0
        state MASTER
        priority 100
        virtual_router_id 126
        garp_master_delay 1
        authentication {
            auth_type PASS
            auth_pass 7615c4b7f518cede
        }
        track_interface {
           eth0
        }
        virtual_ipaddress {
            172.16.25.11/16 dev eth0 label eth0:1
        }
        track_script {
            chk_haproxy
        }
        notify_master "/etc/keepalived/notify.sh master 172.16.25.11"
        notify_backup "/etc/keepalived/notify.sh backup 172.16.25.11"
        notify_fault "/etc/keepalived/notify.sh fault 172.16.25.11"
    }
    # vi /etc/keepalived/notify.sh
    #!/bin/bash
    # Author: Jason.Yu <admin@lnmmp.com>
    # description: An example of notify script
    #
    contact='root@localhost'
    notify() {
        mailsubject="`hostname` to be $1: $2 floating"
        mailbody="`date '+%F %H:%M:%S'`: vrrp transition, `hostname` changed to be $1"
        echo $mailbody | mail -s "$mailsubject" $contact
    }
    case "$1" in
        master)
            notify master $2
            /etc/rc.d/init.d/haproxy restart
            exit 0
        ;;
        backup)
            notify backup $2 # 在节点切换成backup状态时，无需刻意停止haproxy服务，防止chk_maintaince和chk_haproxy多次对haproxy服务操作；
            exit 0
        ;;
        fault)
            notify fault $2 # 同上
            exit 0
        ;;
        *)
            echo 'Usage: `basename $0` {master|backup|fault}'
            exit 1
        ;;
    esac

在两个节点上执行 keepalived 启动命令，命令如下：

$ service keepalived start

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 1][]

**4、Haproxy部署**

在两个节点上都需要执行安装 HAProxy，命令如下：

$ yum -y install haproxy

修改 172.16.25.109 和 172.16.25.110 节点上 haproxy.cfg 文件配置（两节点配置文件内容一致），命令如下：

$ vim /etc/haproxy/haproxy.cfg

配置文件内容如下：

global
        log         127.0.0.1 local2
        chroot      /var/lib/haproxy
        pidfile     /var/run/haproxy.pid
        maxconn     4000
        user         haproxy
        group       haproxy
        daemon # 以后台程序运行；
    defaults
        mode                   http # 选择HTTP模式，即可进行7层过滤；
        log                     global
        option                  httplog # 可以得到更加丰富的日志输出；
        option                  dontlognull
        option http-server-close # server端可关闭HTTP连接的功能；
        option forwardfor except 127.0.0.0/8 # 传递client端的IP地址给server端，并写入“X-Forward_for”首部中；
        option                  redispatch
        retries                 3
        timeout http-request    10s
        timeout queue           1m
        timeout connect         10s
        timeout client          1m
        timeout server          1m
        timeout http-keep-alive 10s
        timeout check           10s
        maxconn                 30000
    listen stats
        mode http
        bind 0.0.0.0:1080 # 统计页面绑定1080端口；
        stats enable # 开启统计页面功能；
        stats hide-version # 隐藏Haproxy版本号；
        stats uri     /haproxyadmin?stats # 自定义统计页面的访问uri；
        stats realm   Haproxy\ Statistics # 统计页面密码验证时的提示信息；
        stats auth    admin:admin # 为统计页面开启登录验证功能；
        stats admin if TRUE # 若登录用户验证通过，则赋予管理功能；
    frontend http-in
        bind *:80
        mode http
        log global
        option httpclose
        option logasap
        option dontlognull
        capture request  header Host len 20
        capture request  header Referer len 60
        acl url_static       path_beg       -i /static /p_w_picpaths /javascript /stylesheets
        acl url_static       path_end       -i .jpg .jpeg .gif .png .css .js .html
        use_backend static_servers if url_static # 符合ACL规则的，请求转入后端静态服务器
        default_backend dynamic_servers # 默认请求转入后端动态服务器
    backend static_servers
        balance roundrobin
        server imgsrv1 192.168.0.25:80 check maxconn 6000 # 静态服务器，可配置多台，还可设置权重weight；
    backend dynamic_servers
        balance source # 对于动态请求利用source调度算法，可一定程度上实现session保持；但最好利用cookie绑定的方式实现session保持
        server websrv1 192.168.0.35:80 check maxconn 1000 # 动态服务器，可配置多台，还可设置权重weight；

两个节点执行启动服务，命令如下：

$ service haproxy start

**5、Nginx部署**

yum -y groupinstall “Development tools”
    yum -y groupinstall “Server Platform Development”
    yum install gcc openssl-devel pcre-devel zlib-devel
    groupadd -r nginx
    useradd -r -g nginx -s /sbin/nologin -M nginx
    tar xf nginx-1.4.7.tar.gz
    cd nginx-1.4.7
    mkdir -pv /var/tmp/nginx
    ./configure \
      --prefix=/usr \
      --sbin-path=/usr/sbin/nginx \
      --conf-path=/etc/nginx/nginx.conf \
      --error-log-path=/var/log/nginx/error.log \
      --http-log-path=/var/log/nginx/access.log \
      --pid-path=/var/run/nginx/nginx.pid  \
      --lock-path=/var/lock/nginx.lock \
      --user=nginx \
      --group=nginx \
      --with-http_ssl_module \
      --with-http_flv_module \
      --with-http_stub_status_module \
      --with-http_gzip_static_module \
      --http-client-body-temp-path=/var/tmp/nginx/client/ \
      --http-proxy-temp-path=/var/tmp/nginx/proxy/ \
      --http-fastcgi-temp-path=/var/tmp/nginx/fcgi/ \
      --http-uwsgi-temp-path=/var/tmp/nginx/uwsgi \
      --http-scgi-temp-path=/var/tmp/nginx/scgi \
      --with-pcre
    make && make install

**配置服务脚本**

vi /etc/init.d/nginx # 配置服务脚本
    #!/bin/sh
    #
    # nginx - this script starts and stops the nginx daemon
    #
    # chkconfig:   - 85 15
    # description:  Nginx is an HTTP(S) server, HTTP(S) reverse \
    #               proxy and IMAP/POP3 proxy server
    # processname: nginx
    # config:      /etc/nginx/nginx.conf
    # config:      /etc/sysconfig/nginx
    # pidfile:     /var/run/nginx.pid
    # Source function library.
    . /etc/rc.d/init.d/functions
    # Source networking configuration.
    . /etc/sysconfig/network
    # Check that networking is up.
    [ "$NETWORKING" = "no" ] && exit 0
    nginx="/usr/sbin/nginx"
    prog=$(basename $nginx)
    NGINX_CONF_FILE="/etc/nginx/nginx.conf"
    [ -f /etc/sysconfig/nginx ] && . /etc/sysconfig/nginx
    lockfile=/var/lock/subsys/nginx
    make_dirs() {
       # make required directories
       user=`nginx -V 2>&1 | grep "configure arguments:" | sed 's/[^*]*--user=$[^ ]*$.*/\1/g' -`
       options=`$nginx -V 2>&1 | grep 'configure arguments:'`
       for opt in $options; do
           if [ `echo $opt | grep '.*-temp-path'` ]; then
               value=`echo $opt | cut -d "=" -f 2`
               if [ ! -d "$value" ]; then
                   # echo "creating" $value
                   mkdir -p $value && chown -R $user $value
               fi
           fi
       done
    }
    start() {
        [ -x $nginx ] || exit 5
        [ -f $NGINX_CONF_FILE ] || exit 6
        make_dirs
        echo -n $"Starting $prog: "
        daemon $nginx -c $NGINX_CONF_FILE
        retval=$?
        echo
        [ $retval -eq 0 ] && touch $lockfile
        return $retval
    }
    stop() {
        echo -n $"Stopping $prog: "
        killproc $prog -QUIT
        retval=$?
        echo
        [ $retval -eq 0 ] && rm -f $lockfile
        return $retval
    }
    restart() {
        configtest || return $?
        stop
        sleep 1
        start
    }
    reload() {
        configtest || return $?
        echo -n $"Reloading $prog: "
        killproc $nginx -HUP
        RETVAL=$?
        echo
    }
    force_reload() {
        restart
    }
    configtest() {
      $nginx -t -c $NGINX_CONF_FILE
    }
    rh_status() {
        status $prog
    }
    rh_status_q() {
        rh_status >/dev/null 2>&1
    }
    case "$1" in
        start)
            rh_status_q && exit 0
            $1
            ;;
        stop)
            rh_status_q || exit 0
            $1
            ;;
        restart|configtest)
            $1
            ;;
        reload)
            rh_status_q || exit 7
            $1
            ;;
        force-reload)
            force_reload
            ;;
        status)
            rh_status
            ;;
        condrestart|try-restart)
            rh_status_q || exit 0
                ;;
        *)
            echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload|configtest}"
            exit 2
    esac
    chmod +x /etc/init.d/nginx # 复***务脚本执行权限
    vi /etc/nginx/nginx.conf # 编辑主配置文件
    worker_processes  2;
    error_log  /var/log/nginx/nginx.error.log;
    pid        /var/run/nginx.pid;
    events {
        worker_connections  1024;
    }
    http {
        include       mime.types;
        default_type  application/octet-stream;
        log_format  main  '$remote_addr - $remote_user [$time_local] "$request" '
                          '$status $body_bytes_sent "$http_referer" '
                          '"$http_user_agent" "$http_x_forwarded_for"';
        sendfile        on;
        keepalive_timeout  65;
        server {
            listen       80;
            server_name  xxrenzhe.lnmmp.com;
            access_log  /var/log/nginx/nginx.access.log  main;
            location / {
                root   /www/lnmmp.com;
                index  index.php index.html index.htm;
            }
            error_page  404              /404.html;
            error_page  500 502 503 504  /50x.html;
            location = /50x.html {
                root   /www/lnmmp.com;
            }
            location ~ \.php$ {
                root           /www/lnmmp.com;
                fastcgi_pass   127.0.0.1:9000;
                fastcgi_index  index.php;
                fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;
                include        fastcgi_params;
            }
        }
    }
    vi /etc/nginx/fastcgi_params # 编辑fastcgi参数文件
    fastcgi_param  GATEWAY_INTERFACE  CGI/1.1;
    fastcgi_param  SERVER_SOFTWARE    nginx;
    fastcgi_param  QUERY_STRING       $query_string;
    fastcgi_param  REQUEST_METHOD     $request_method;
    fastcgi_param  CONTENT_TYPE       $content_type;
    fastcgi_param  CONTENT_LENGTH     $content_length;
    fastcgi_param  SCRIPT_FILENAME    $document_root$fastcgi_script_name;
    fastcgi_param  SCRIPT_NAME        $fastcgi_script_name;
    fastcgi_param  REQUEST_URI        $request_uri;
    fastcgi_param  DOCUMENT_URI       $document_uri;
    fastcgi_param  DOCUMENT_ROOT      $document_root;
    fastcgi_param  SERVER_PROTOCOL    $server_protocol;
    fastcgi_param  REMOTE_ADDR        $remote_addr;
    fastcgi_param  REMOTE_PORT        $remote_port;
    fastcgi_param  SERVER_ADDR        $server_addr;
    fastcgi_param  SERVER_PORT        $server_port;
    fastcgi_param  SERVER_NAME        $server_name;

**启动服务**

service nginx configtest # 服务启动前先验证配置文件是否正确
    service nginx start
    ps -ef |grep nginx # 检查nginx进程，尤其是worker进程是否与worker_processes值一致
    ss -antupl |grep 80 # 检查服务端口是否启动

**6、访问验证**

**Haproxy 统计页面测试**

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 2][]

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 3][]

**动静分离测试**

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 4][]

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 5][]

**高可用测试**

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 6][]

到此 Nginx高可用集群构建（Keepalived+Haproxy+Nginx）介绍完成。

[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70]: /images/20221014/1c036a21c53649c8988f9fbc1a228ac3.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 1]: /images/20221014/4d7b985e12224766ab9a0eb1fa19bad6.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 2]: /images/20221014/7a297994b7544e8eafd23bda826587b0.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 3]: /images/20221014/2521287b751340fabe9a896a85f4a18c.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 4]: /images/20221014/78b2021f319e40f498290b24d25f293d.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 5]: /images/20221014/75e25bb14eed412887260a78512c5167.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3FxXzE5NzM0NTk3_size_16_color_FFFFFF_t_70 6]: /images/20221014/7cc16eb65de441718b78b931de042b9a.png