springboot生产环境中关闭swagger

怼烎@ 2022-10-02 11:57 1455阅读 0赞

swagger一般是在开发时调试用的，在生产环境要关闭swagger，下面是我找到的几种关闭swagger的方法，记录一下，噶供大家参考。

1、启动判断写在相应的环境配置文件中，根据条件判断是否启动 swagger ：  
    添加配置项：swagger.is.enable  
    @Value("$\{swagger.is.enable\}") private boolean swagger\_is\_enable;

@Bean
    public Docket createRestApi() {
    
    return new Docket(DocumentationType.SWAGGER_2)
        .enable(swagger_is_enable)
        .apiInfo(apiInfo()).select()
        // 扫描指定包中的swagger注解
        .apis(RequestHandlerSelectors.basePackage("springboot_druid_demo.controller"))
        .paths(PathSelectors.any())
        .build()
        .pathMapping("/");
    }

具体实现，参考链接：[https://blog.csdn.net/u012946310/article/details/82379429][https_blog.csdn.net_u012946310_article_details_82379429]

2、通过不同的profile给swagger的依赖设置不同的scope  
     使用注解@Profile(\{"dev","test"\}) 表示在开发或测试环境开启，而在生产关闭。（推荐使用）

<dependency>
    			<groupId>io.springfox</groupId>
    			<artifactId>springfox-swagger2</artifactId>
    			<version>${springfox-swagger.version}</version>
    			<scope>${swagger.scope}</scope>
    		</dependency>
    		<dependency>
    			<groupId>io.springfox</groupId>
    			<artifactId>springfox-swagger-ui</artifactId>
    			<scope>${swagger.scope}</scope>
    			<version>${springfox-swagger-ui.version}</version>
    		</dependency>

<profiles>
    		<profile>
    			<id>dev</id>
    			<properties>
    				<profiles.active>dev</profiles.active>
    				<swagger.scope>compile</swagger.scope>
    			</properties>
    			<activation>
    				<activeByDefault>true</activeByDefault>
    			</activation>
    		</profile>
    		<profile>
    			<id>test</id>
    			<properties>
    				<profiles.active>test</profiles.active>
    				<swagger.scope>compile</swagger.scope>
    			</properties>
    		</profile>
    		<profile>
    			<id>online</id>
    			<properties>
    				<profiles.active>online</profiles.active>
    				<swagger.scope>provided</swagger.scope>
    			</properties>
    		</profile>
    	</profiles>

具体实现，参考链接：[https://blog.csdn.net/goldenfish1919/article/details/78280051][https_blog.csdn.net_goldenfish1919_article_details_78280051]  
3、使用注解@ConditionalOnProperty(name = "swagger.enable", havingValue = "true")    
    然后在测试配置或者开发配置中 添加 swagger.enable = true 即可开启，生产环境不填则默认关闭Swagger.

[https_blog.csdn.net_u012946310_article_details_82379429]: https://blog.csdn.net/u012946310/article/details/82379429
[https_blog.csdn.net_goldenfish1919_article_details_78280051]: https://blog.csdn.net/goldenfish1919/article/details/78280051