ubuntu 12.04下安装 nginx php mysql -- 安装笔记

àì夳堔傛蜴生んèń 2022-09-29 12:58 107阅读 0赞

ubuntu 12.04 下 nginx php mysql 安装笔记

本篇文章参考了 张宴 的《Nginx 0.8.x + PHP 5.2.13（FastCGI）搭建胜过Apache十倍的Web服务器（第6版）\[原创\]》，在其基础上改造而来，对其表示感谢，因为我个人一直用的是ubuntu

注意：此安装，是用来在自己的机器上开发环境用的，所以编译时选项很多都打开了debug选项，要是做为生产环境的话，在编译时请关掉debug选项，并加上优化参数

本文是 vincentzhwg 所写，转载请注明作者：vincentzhwg

系统版本：ubuntu desktop 64位

版本

nginx 1.0.14

php 5.4.0

mysql 5.5.22

先下载好所有的文件以便安装，这里下载所有的文件到 ~/Documents/LNMP/source 文件夹中

创建文件夹

mkdir -p ~/Documents/LNMP/source

mkdir -p ~/Documents/LNMP/extra

下载相应的安装源代码包,需要下载的包有以下几种，我以自己下载时的版本号为例

libiconv-1.14.tar.gz

libmcrypt-2.5.8.tar.gz

mcrypt-2.6.8.tar.gz

mhash-0.9.9.9.tar.gz

pcre-8.30.tar.gz

mysql-5.5.22.tar.gz

nginx-1.0.14.tar.gz

php-5.4.0.tar.gz

文件下载可以在网上搜索进入其官网后下载，且压缩格式不一定要跟我下载的相同，就是解压的时候根据不同的压缩格式使用不同的命令

文件也可以从我的CSDN资源空间上下载，列出空间下载地址列表如下：

[http://download.csdn.net/detail/vincent17113/4179857][http_download.csdn.net_detail_vincent17113_4179857]

安装基本编译工具

apt-get install build-essential automake autoconf cmake

进入到存放这些源代码包的文件夹中

然后运行以下命令段做安装前的准备

cd ~/Documents/LNMP/source/
    tar zxvf libiconv-1.14.tar.gz -C ../extra/
    cd ../extra/libiconv-1.14/
    ./configure --prefix=/usr/local
    make
    sudo make install
    cd ../../source/
    tar zxvf libmcrypt-2.5.8.tar.gz -C ../extra/
    cd ../extra/libmcrypt-2.5.8/
    ./configure 
    make
    sudo make install
    sudo /sbin/ldconfig
    cd libltdl/
    ./configure --enable-ltdl-install
    make
    sudo make install
    cd ../../../source/
    tar zxvf mhash-0.9.9.9.tar.gz -C ../extra/
    cd ../extra/mhash-0.9.9.9/
    ./configure 
    make
    sudo make install
    cd ../../source/
    sudo /sbin/ldconfig
    sudo ln -s /usr/local/lib/libmcrypt.la /usr/lib/libmcrypt.la
    sudo ln -s /usr/local/lib/libmcrypt.so /usr/lib/libmcrypt.so
    sudo ln -s /usr/local/lib/libmcrypt.so.4 /usr/lib/libmcrypt.so.4
    sudo ln -s /usr/local/lib/libmcrypt.so.4.4.8 /usr/lib/libmcrypt.so.4.4.8
    sudo ln -s /usr/local/lib/libmhash.a /usr/lib/libmhash.a
    sudo ln -s /usr/local/lib/libmhash.la /usr/lib/libmhash.la
    sudo ln -s /usr/local/lib/libmhash.so /usr/lib/libmhash.so
    sudo ln -s /usr/local/bin/libmcrypt-config /usr/bin/libmcrypt-config
    sudo /sbin/ldconfig
    tar zxvf mcrypt-2.6.8.tar.gz -C ../extra/
    cd ../extra/mcrypt-2.6.8/
    ./configure 
    make
    sudo make install
    cd ../../source/
    tar zxvf pcre-8.30.tar.gz -C ../extra/
    cd ../extra/pcre-8.30/
    ./configure 
    make
    sudo make install
    cd ../../source/
    sudo /sbin/ldconfig

运行完以上命令，再运行下面的命令安装上缺失的包

sudo apt-get install \
    libcurses-ocaml-dev \
    libxml2-dev \
    libssl-dev \
    libbz2-dev \
    libcurl4-gnutls-dev \
    libjpeg-dev \
    libpng12-dev \
    libxpm-dev \
    libfreetype6-dev \
    libxslt1-dev

运行以下命令产生软链接

sudo ln -s /usr/lib/x86_64-linux-gnu/libXpm.a /usr/lib/libXpm.a
    sudo ln -s /usr/lib/x86_64-linux-gnu/libXpm.so /usr/lib/libXpm.so
    sudo ln -s /usr/lib/x86_64-linux-gnu/libXpm.so.4 /usr/lib/libXpm.so.4
    sudo ln -s /usr/lib/x86_64-linux-gnu/libXpm.so.4.11.0 /usr/lib/libXpm.so.4.11.0
    sudo /sbin/ldconfig

开始安装 mysql

创建用户与存放数据库数据的文件夹

sudo groupadd mysql
    sudo useradd -r mysql -g mysql
    sudo mkdir -p /home/mysql/3306/data
    sudo chown -R mysql:mysql /home/mysql

解压

cd ~/Documents/LNMP/source
    tar zxvf mysql-5.5.22.tar.gz -C ../extra/
    cd ../extra/mysql-5.5.22/

运行以下命令行编译 mysql,比较长，记得编译时是把下面的多行一起复制到命令窗口编译

cmake \
    -DCMAKE_INSTALL_PREFIX=/usr/local/mysql \
    -DWITH_INNOBASE_STORAGE_ENGINE=1 \
    -DDEFAULT_CHARSET=utf8 \
    -DDEFAULT_COLLATION=utf8_general_ci \
    -DENABLE_DEBUG_SYNC=1 \
    -DENABLED_LOCAL_INFILE=1 \
    -DENABLED_PROFILING=1 \
    -DWITH_EMBEDDED_SERVER=1 \
    -DWITH_EXTRA_CHARSETS=all \
    -DWITH_LIBWRAP=1 \
    -DWITH_READLINE=1 \
    -DWITH_SSL=yes

编译完后运行下面两个命令安装

make
    sudo make install
    sudo cp /usr/local/mysql/support-files/my-medium.cnf /home/mysql/3306/my.cnf

编辑 my.cnf 文件以支持 innodb，编辑完内容如下

# Example MySQL config file for medium systems.
    #
    # This is for a system with little memory (32M - 64M) where MySQL plays
    # an important part, or systems up to 128M where MySQL is used together with
    # other programs (such as a web server)
    #
    # MySQL programs look for option files in a set of
    # locations which depend on the deployment platform.
    # You can copy this option file to one of those
    # locations. For information about these locations, see:
    # http://dev.mysql.com/doc/mysql/en/option-files.html
    #
    # In this file, you can use all long options that a program supports.
    # If you want to know which options a program supports, run the program
    # with the "--help" option.
    
    # The following options will be passed to all MySQL clients
    [client]
    #password	= your_password
    port		= 3306
    socket		= /tmp/mysql.sock
    
    # Here follows entries for some specific programs
    
    # The MySQL server
    [mysqld]
    port		= 3306
    socket		= /tmp/mysql.sock
    skip-external-locking
    key_buffer_size = 16M
    max_allowed_packet = 1M
    table_open_cache = 64
    sort_buffer_size = 512K
    net_buffer_length = 8K
    read_buffer_size = 256K
    read_rnd_buffer_size = 512K
    myisam_sort_buffer_size = 8M
    
    # Don't listen on a TCP/IP port at all. This can be a security enhancement,
    # if all processes that need to connect to mysqld run on the same host.
    # All interaction with mysqld must be made via Unix sockets or named pipes.
    # Note that using this option without enabling named pipes on Windows
    # (via the "enable-named-pipe" option) will render mysqld useless!
    # 
    #skip-networking
    
    # Replication Master Server (default)
    # binary logging is required for replication
    log-bin=mysql-bin
    
    # binary logging format - mixed recommended
    binlog_format=mixed
    
    # required unique id between 1 and 2^32 - 1
    # defaults to 1 if master-host is not set
    # but will not function as a master if omitted
    server-id	= 1
    
    # Replication Slave (comment out master section to use this)
    #
    # To configure this host as a replication slave, you can choose between
    # two methods :
    #
    # 1) Use the CHANGE MASTER TO command (fully described in our manual) -
    #    the syntax is:
    #
    #    CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
    #    MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
    #
    #    where you replace <host>, <user>, <password> by quoted strings and
    #    <port> by the master's port number (3306 by default).
    #
    #    Example:
    #
    #    CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
    #    MASTER_USER='joe', MASTER_PASSWORD='secret';
    #
    # OR
    #
    # 2) Set the variables below. However, in case you choose this method, then
    #    start replication for the first time (even unsuccessfully, for example
    #    if you mistyped the password in master-password and the slave fails to
    #    connect), the slave will create a master.info file, and any later
    #    change in this file to the variables' values below will be ignored and
    #    overridden by the content of the master.info file, unless you shutdown
    #    the slave server, delete master.info and restart the slaver server.
    #    For that reason, you may want to leave the lines below untouched
    #    (commented) and instead use CHANGE MASTER TO (see above)
    #
    # required unique id between 2 and 2^32 - 1
    # (and different from the master)
    # defaults to 2 if master-host is set
    # but will not function as a slave if omitted
    #server-id       = 2
    #
    # The replication master for this slave - required
    #master-host     =   <hostname>
    #
    # The username the slave will use for authentication when connecting
    # to the master - required
    #master-user     =   <username>
    #
    # The password the slave will authenticate with when connecting to
    # the master - required
    #master-password =   <password>
    #
    # The port the master is listening on.
    # optional - defaults to 3306
    #master-port     =  <port>
    #
    # binary logging - not required for slaves, but recommended
    #log-bin=mysql-bin
    
    # Uncomment the following if you are using InnoDB tables
    innodb_data_home_dir = /home/mysql/3306/data
    innodb_data_file_path = ibdata1:10M:autoextend
    innodb_log_group_home_dir = /home/mysql/3306/data
    # You can set .._buffer_pool_size up to 50 - 80 %
    # of RAM but beware of setting memory usage too high
    innodb_buffer_pool_size = 16M
    innodb_additional_mem_pool_size = 2M
    # Set .._log_file_size to 25 % of buffer pool size
    innodb_log_file_size = 5M
    innodb_log_buffer_size = 8M
    innodb_flush_log_at_trx_commit = 1
    innodb_lock_wait_timeout = 50
    
    [mysqldump]
    quick
    max_allowed_packet = 16M
    
    [mysql]
    no-auto-rehash
    # Remove the next comment character if you are not familiar with SQL
    #safe-updates
    
    [myisamchk]
    key_buffer_size = 20M
    sort_buffer_size = 20M
    read_buffer = 2M
    write_buffer = 2M
    
    [mysqlhotcopy]
    interactive-timeout

后期设置命令

cd /usr/local/mysql

chown -R mysql:mysql .

初始化数据库

sudo /usr/local/mysql/scripts/mysql_install_db --defaults-file=/home/mysql/3306/my.cnf --user=mysql --basedir=/usr/local/mysql --datadir=/home/mysql/3306/data

启动数据库

sudo /usr/local/mysql/bin/mysqld_safe --defaults-file=/home/mysql/3306/my.cnf --user=mysql --basedir=/usr/local/mysql --datadir=/home/mysql/3306/data &

修改用户名密码,其中的 NEW\_PASSWORD 换成你自己想要设置的密码

/usr/local/mysql/bin/mysqladmin -u root password 'YOUR PASSWORD'

关闭数据库使用如下命令

/usr/local/mysql/bin/mysqladmin -u root -p shutdown

安装 PHP

建立 www 用户

sudo groupadd www
    sudo useradd -r www -g www

解压

cd ~/Documents/LNMP/source/
    tar zxvf php-5.4.0.tar.gz -C ../extra/
    cd ../extra/php-5.4.0/

编译命令，有些长，记得一起复制到终端中

./configure \
    --prefix=/usr/local/php \
    --with-mysql=/usr/local/mysql \
    --with-mysqli=/usr/local/mysql/bin/mysql_config \
    --with-pdo-mysql=/usr/local/mysql \
    --enable-fpm \
    --with-fpm-user=www \
    --with-fpm-group=www \
    --with-curl \
    --with-pear \
    --with-gd \
    --with-jpeg-dir \
    --with-png-dir \
    --with-zlib \
    --with-xpm-dir \
    --with-freetype-dir \
    --with-mcrypt \
    --with-mhash \
    --with-openssl \
    --with-xmlrpc \
    --with-xsl \
    --with-bz2 \
    --with-gettext \
    --disable-debug \
    --enable-exif \
    --enable-wddx \
    --enable-zip \
    --enable-bcmath \
    --enable-calendar \
    --enable-ftp \
    --enable-mbstring \
    --enable-soap \
    --enable-sockets \
    --enable-shmop \
    --enable-dba \
    --enable-sysvsem \
    --enable-sysvshm \
    --enable-sysvmsg

编译完成后，进行安装

make ZEND_EXTRA_LIBS='-liconv'
    sudo make install

设置配置文件

sudo cp ~/Documents/LNMP/extra/php-5.4.0/php.ini-production /usr/local/php/lib/php.ini
    cd /usr/local/php/etc
    sudo cp php-fpm.conf.default php-fpm.conf

修改配置文件

修改 php.ini ，去掉 date.timezone 的注释，并设置为 date.timezone = PRC

更改权限

sudo chown -R www:www /usr/local/php

启动 php-fpm

sudo /usr/local/php/sbin/php-fpm

关闭的话，使用以下命令查找出进程号

sudo ps -x | grep php-fpm

假设查找到的进程号为 1214 ,则运行以下命令关闭 php-fpm 进行

sudo kill -QUIT 1214

安装 nginx

解压

cd ~/Documents/LNMP/source/
    tar zxvf nginx-1.0.14.tar.gz -C ../extra/
    cd ../extra/nginx-1.0.14/

编译

./configure \
    --prefix=/usr/local/nginx \
    --user=www \
    --group=www \
    --with-http_stub_status_module \
    --with-http_ssl_module

安装

make
    sudo make install

编辑 nginx.conf

将第二行的 \#user 去掉注释，并改为

user www www;

启动nginx

sudo /usr/local/nginx/sbin/nginx

关闭

sudo /usr/local/nginx/sbin/nginx -s stop

重载配置文件

sudo /usr/local/nginx/sbin/nginx -s reload

至此整个安装过程结束，做个测试吧

sudo mkdir -p /home/host/php/test
    sudo mkdir /usr/local/nginx/conf/servers

在 /home/host/php/test下新建一文件 index.php ,内容如下

<?php
    phpinfo();

在 /usr/local/nginx/conf/servers 下新建一文件 test.vhost，内容如下

server {
        listen  80;
        server_name vct.test.com;
        root /home/host/php/test;
    
        location / {
            index index.php;
        }
    
    
        location ~ \.php$ {
            include        fastcgi_params;
            fastcgi_pass   127.0.0.1:9000;
            fastcgi_index  index.php;
            fastcgi_param  SCRIPT_FILENAME  $document_root$fastcgi_script_name;
        }
    
    }

编辑 /usr/local/nginx/conf/nginx.conf 文件，在最后一个 \} 之前加入一行

include servers/*.vhost;

编辑 /etc/hosts 文件，加入一行

127.0.0.1 vct.test.com

运行以下命令，更改权限并启动服务

sudo chown -R www:www /usr/local/nginx
    sudo chown -R nobody:nogroup /home/host/php
    sudo /usr/local/php/sbin/php-fpm
    sudo /usr/local/nginx/sbin/nginx

然后，打开浏览器，输入地址 vct.taiup.com ,应该就能看到 php 的相关信息了。

为了方便，把三样服务加入到开机自启动中，这样以后一开机就会自动启动了，也可以容易避开中途启动时端口被占用的问题

编辑 /etc/rc.local 文件，在 exit 0 语句前加入以下语句

/usr/local/mysql/bin/mysqld_safe --defaults-file=/home/mysql/3306/my.cnf --user=mysql --basedir=/usr/local/mysql --datadir=/home/mysql/3306/data &
    sleep 5
    
    /usr/local/php/sbin/php-fpm
    sleep 3
    
    /usr/local/nginx/sbin/nginx
    sleep 3

[http_download.csdn.net_detail_vincent17113_4179857]: http://download.csdn.net/detail/vincent17113/4179857