pyinstaller使用-python项目转换成exe可执行文件

超、凢脫俗 2022-08-20 05:11 379阅读 0赞

http://[blog.csdn.net/pipisorry/article/details/50620122][blog.csdn.net_pipisorry_article_details_50620122]

Python不是每个人的计算机里面都有安装，当您写了一个好用的工具，需要一个standalone exectuable环境的需求。并且用python写些脚本什么的，有时候脚本写完以后，每次运行都得在IDE打开在运行，很麻烦，所以经常将python编译成exe。

本文介绍如何将一个python项目（或者简单一点一个python脚本文件）转化为windows下的可执行文件。

转化要使用python转换为exe可执行文件的库，一个是py2exe，另外一个就是PyInstaller。

py2exe：

打包好的exe只能在相同的系统下运行，比如你在XP系统用py2exe打包好的exe只能在XP上运行，在win7上肯定有问题，而且也是存在在别的XP机子上也可能不能运行，因为一些别的机子可能会缺少dll文件；

打包的文件也需要打包同exe下的dll，和一些库的压缩包，不然exe根本跑不起来

还需要另外的其他库文件配置。  
PyInstaller：  
可以只是生成单独的可执行程序  
且支持的版本也多：2.3到2.7都支持。以及x64也支持  
也可以自定义图标

本文介绍pyinstaller的使用。

# 安装pyinstaller #

pyinstaller支持python2和python3

命令行安装：**pip install pyinstaller**

或者去下载安装：[PyInstaller 3.1 (tar.gz)][PyInstaller 3.1 _tar.gz] | [http://sourceforge.net/projects/pywin32/files/pywin32/Build%20217/][http_sourceforge.net_projects_pywin32_files_pywin32_Build_20217]  
**Note**: windows下转换要先安装pywin32: ** pip install pywin32**\[[pywin32的安装][pywin32]\]  
皮皮blog

# pyinstaller的使用 #

## 命令行中转换py文件为exe文件 ##

pi@PIPI /e/mine/python\_workspace/nlp(dev)

**$pyinstaller -F E:/mine/python\_workspace/NLP/TargetOpinion/TargetOpinionMain.py**  
在命令行当前路径/e/mine/python\_workspace/nlp中会生成

build目录（生成exe的中间文件）

spec文件（要转换文件的同一目录下，用于生成exe文件，可以修改来自定义生成exe的属性）

![Center][]

**指定dist生成目录路径（而不是命令行当前目录）**

pyinstaller -F E:/mine/python\_workspace/test0/testMain.py --distpath=E:/mine/python\_workspace/test0/dist

**压缩生成的exe文件**

用UPX去压缩，压缩后所生成的exe文件的大小，会小得多

\--upx        I mentioned that this is a great option, and it is, but it's really slow, especially as your source file gets bigger.  It's a great option for your final compile before distributing, but you might save a lot of time if you turn it off until then.

**先下载[http://upx.sourceforge.net/][http_upx.sourceforge.net]解压到要转换到的py文件目录下**

pyinstaller参数中添加upx路径

pyinstaller -F E:/mine/python\_workspace/NLP/TargetOpinion/TargetOpinionMain.py**--upx-dir upx391w**

\[[http://pythonhosted.org/PyInstaller/\#using-upx][http_pythonhosted.org_PyInstaller_using-upx]\]

**直接进入界面程序**

pyinstaller生成的exe文件是从命令行开始执行的，如果之前的程序是界面程序（如pyqt界面开始执行的），则要改成从界面执行，这样就不会看到命令行输出了（如bug错误输出、print输出等）

pyinstaller -F**w** E:/mine/python\_workspace/NLP/TargetOpinion/TargetOpinionMain.py

当然，如果是在调试期间，建议不要加w参数，这样就可以从命令行看到bug提示了。

**修改中间文件spec文件生成自定义exe文件**

修改中间文件，再去生成exe文件

如，在生成exe文件的同时，在exe目录下（dist目录）生成一个数据文件，相当于将python项目中的数据文件拷贝到dist目录

修改spec文件中datas如下：datas= \[ ('nlptest/patternFile.txt', '.' ) \],

pyinstaller -F E:/mine/python\_workspace/test0/testMain.spec

\[[http://pythonhosted.org/PyInstaller/\#using-spec-files][http_pythonhosted.org_PyInstaller_using-spec-files]\]

## 一步一步生成 ##

当然也可以一步一步生成，并使用中间文件

生成中间文件：python Makespec.py --console --onefile NotePad\\notepad.py

再build生成exe文件：python Build.py NotePad\\notepad.spec

\[[关于python打包成exe的一点经验之谈][python_exe]\]

\[[.py程序转换成.exe可执行程序][.py_.exe]\]

## py代码调用pyinstaller，将.py文件转换成exe文件（推荐） ##

当然也可以在TargetOpinionMain.py同目录下创建一个转换文件TargetPy2exe.py：

#!/usr/bin/env python
    # -*- coding: utf-8 -*-
    """
    __title__ = '将TargetOpinionMain python项目转换为exe文件'
    __author__ = '皮'
    __email__ = 'pipisorry@126.com'
    """
    from PyInstaller.__main__ import run
    
    if __name__ == '__main__':
        opts = ['TargetOpinionMain.py', '-F']
        # opts = ['TargetOpinionMain.py', '-F', '-w']
        # opts = ['TargetOpinionMain.py', '-F', '-w', '--icon=TargetOpinionMain.ico','--upx-dir','upx391w']
        run(opts)

效果同命令行执行是一样的，只不过使用IDE执行这个转换代码，出错的话会有出错栈提示，可以很快到达出错位置；并且生成的build、dist目录就在本目录下，不用担心在命令行中执行目录错乱，找不到或者搞混dist目录。

## pyinstaller生成exe文件后，数据文件读取路径的改变 ##

python项目中读取文件会出错，其原因是读取的文件路径不是原来的了，因为所有文件都编译了，成了一个文件exe文件。

文件目录的改变可参考：\[[pyinstaller 生成单一的EXE文件之后获取当前目录的方法][pyinstaller _EXE]\]

如果pythony代码中有读取文件操作，解决方案见：\[[pyinstaller相关错误][pyinstaller]\]

皮皮blog

# 附录 #

## pyinstaller参数 ##

### [General Options][] ###

<table style="border:0px solid rgb(221,204,238); margin-left:2em; margin-right:2em; border-collapse:collapse">     
 <tbody> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,221,238)"> <span>-h</span>,&nbsp;<span>--help</span></td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> show this help message and exit</td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,221,238)"> <span>-v</span>,&nbsp;<span>--version</span></td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Show program version info and exit.</td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,221,238)"> <span>--distpath&nbsp;DIR</span></td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Where to put the bundled app (default: ./dist)</td> 
  </tr> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>--workpath&nbsp;WORKPATH</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Where to put all the temporary work files, .log, .pyz and etc. (default: ./build)</td> 
  </tr> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>-y</span>,&nbsp;<span>--noconfirm</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Replace output directory (default: SPECPATH/dist/SPECNAME) without asking for confirmation</td> 
  </tr> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>--upx-dir&nbsp;UPX_DIR</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Path to UPX utility (default: search the execution path)</td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,221,238)"> <span>-a</span>,&nbsp;<span>--ascii</span></td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Do not include unicode encoding support (default: included if available)</td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,221,238)"> <span>--clean</span></td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Clean PyInstaller cache and remove temporary files before building.</td> 
  </tr> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>--log-level&nbsp;LEVEL</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Amount of detail in build-time console messages. LEVEL may be one of DEBUG, INFO, WARN, ERROR, CRITICAL (default: INFO).</td> 
  </tr> 
 </tbody> 
</table>

### [What to generate][] ###

### [What to bundle, where to search][What to bundle_ where to search] ###

<table style="border:0px solid rgb(221,204,238); margin-left:2em; margin-right:2em; border-collapse:collapse">     
 <tbody> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>-p&nbsp;DIR</span>,&nbsp;<span>--paths&nbsp;DIR</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> A path to search for imports (like using PYTHONPATH). Multiple paths are allowed, separated by ':', or use this option multiple times</td> 
  </tr> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>--hidden-import&nbsp;MODULENAME</span>,&nbsp;<span>--hiddenimport&nbsp;MODULENAME</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Name an import not visible in the code of the script(s). This option can be used multiple times.</td> 
  </tr> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>--additional-hooks-dir&nbsp;HOOKSPATH</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> An additional path to search for hooks. This option can be used multiple times.</td> 
  </tr> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>--runtime-hook&nbsp;RUNTIME_HOOKS</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Path to a custom runtime hook file. A runtime hook is code that is bundled with the executable and is executed before any other code or module to set up special features of the runtime environment. This option can be used multiple times.</td> 
  </tr> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>--exclude-module&nbsp;EXCLUDES</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Optional module or package (his Python names, not path names) that will be ignored (as though it was not found). This option can be used multiple times.</td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,221,238)"> <span>--key&nbsp;KEY</span></td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> The key used to encrypt Python bytecode.</td> 
  </tr> 
 </tbody> 
</table>

### [How to generate][] ###

### [Windows and Mac OS X specific options][] ###

### [Windows specific options][] ###

<table style="border:0px solid rgb(221,204,238); margin-left:2em; margin-right:2em; border-collapse:collapse">     
 <tbody> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>--version-file&nbsp;FILE</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> add a version resource from FILE to the exe</td> 
  </tr> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>-m&nbsp;&lt;FILE or XML&gt;</span>,&nbsp;<span>--manifest&nbsp;&lt;FILE or XML&gt;</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> add manifest FILE or XML to the exe</td> 
  </tr> 
  <tr> 
   <td colspan="2" style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,238,255)"> <span>-r&nbsp;RESOURCE</span>,&nbsp;<span>--resource&nbsp;RESOURCE</span></td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px; background:rgb(238,238,255)"> &nbsp;</td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Add or update a resource to a Windows executable. The RESOURCE is one to four items, FILE[,TYPE[,NAME[,LANGUAGE]]]. FILE can be a data file or an exe/dll. For data files, at least TYPE and NAME must be specified. LANGUAGE defaults to 0 or may be specified as wildcard * to update all resources of the given TYPE and NAME. For exe/dll files, all resources from FILE will be added/updated to the final executable if TYPE, NAME and LANGUAGE are omitted or specified as wildcard *.This option can be used multiple times.</td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,221,238)"> <span>--uac-admin</span></td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Using this option creates a Manifest which will request elevation upon application restart.</td> 
  </tr> 
  <tr> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 2px 0px; background:rgb(238,221,238)"> <span>--uac-uiaccess</span></td> 
   <td style="border-left-width:0px; border-left-style:none; padding:2px 5px 0.5em; background:rgb(238,238,255)"> Using this option allows an elevated application to work with Remote Desktop.</td> 
  </tr> 
 </tbody> 
</table>

### [Windows Side-by-side Assembly searching options (advanced)][Windows Side-by-side Assembly searching options _advanced] ###

### [Mac OS X specific options][] ###

## [Shortening the Command][] ##

Because of its numerous options, a full pyinstaller command can become very long. You will run the same command again and again as you develop your script. You can put the command in a shell script or batch file, using line continuations to make it readable. For example, in Linux:

pyinstaller --noconfirm --log-level=WARN \
        --onefile --nowindow \
        --hidden-import=secret1 \
        --hidden-import=secret2 \
        --upx-dir=/usr/local/share/ \
        myscript.spec

Or in Windows, use the little-known BAT file line continuation:

pyinstaller --noconfirm --log-level=WARN ^
        --onefile --nowindow ^
        --hidden-import=secret1 ^
        --hidden-import=secret2 ^
        --icon-file=..\MLNMFLCN.ICO ^
        myscript.spec

\[[http://pythonhosted.org/PyInstaller/\#options][http_pythonhosted.org_PyInstaller_options]\]

## **pyinstaller-2.0 参数(**翻译) ##

![QQ截图20130403234716.png][QQ_20130403234716.png]

**Note**:--onefile前面是两个-。

\-F　　　　制作独立的可执行程序  
\-D　　　　制作出的档案存放在同一个文件夹下（默认值）  
\-K　　　　包含TCL/TK（对于使用了TK的，最好加上这个选项，否则在未安装TK的电脑上无法运行）  
\-w　　　  制作窗口程序  
\-c　　　　制作命令行程序（默认）  
\-X　　　　制作使用UPX压缩过的可执行程序（推荐使用这个选项，需要下载UPX包，解压后upx.exe放在Python(非PyInstaller)安装目录下，下载upx308w.zip）  
\-o DIR　　指定输出SPEC文件路径（这也决定了最后输出的exe文件路径）  
\--icon=\[ICO文件路径\] 指定程序图标  
\-v \[指定文件\] 指定程序版本信息  
\-n \[指定程序名\] 指定程序名称

# pyinstaller生成的exe文件执行过程 #

单独生成一个exe文件（-F参数）后，exe文件是怎么运行的：

How the One-File Program Works  
The bootloader is the heart of the one-file bundle also. When started it creates a temporary folder in the appropriate temp-folder location for this OS. The folder is named \_MEIxxxxxx, where xxxxxx is a random number.  
The one executable file contains an embedded archive of all the Python modules used by your script, as well as compressed copies of any non-Python support files (e.g. .so files). The bootloader uncompresses the support files and writes copies into the the temporary folder. This can take a little time. That is why a one-file app is a little slower to start than a one-folder app.  
After creating the temporary folder, the bootloader proceeds exactly as for the one-folder bundle, in the context of the temporary folder. When the bundled code terminates, the bootloader deletes the temporary folder.

\[[http://pythonhosted.org/PyInstaller/\#how-the-one-file-program-works][http_pythonhosted.org_PyInstaller_how-the-one-file-program-works]\]

What happens during execution of bootloader:

1.  First process: bootloader starts.
    
    > 1.  If one-file mode, extract bundled files to *temppath*\_MEI*xxxxxx*
    > 2.  Set/unset various environment variables, e.g. override LD\_LIBRARY\_PATH on Linux or LIBPATH on AIX; unset DYLD\_LIBRARY\_PATH on OSX.
    > 3.  Set up to handle signals for both processes.
    > 4.  Run the child process.
    > 5.  Wait for the child process to finish.
    > 6.  If one-file mode, delete *temppath*\_MEI*xxxxxx*.注意，exe文件运行完成后，temp目录下的临时文件\_mei\*\*\*就会被删除。
2.  Second process: bootloader itself started as a child process.
    
    > 1.  On Windows set the [activation context][].
    > 2.  Load the Python dynamic library. The name of the dynamic library is embedded in the executable file.
    > 3.  Initialize Python interpreter: set sys.path, sys.prefix, sys.executable.
    > 4.  Run python code.

Running Python code requires several steps:

1.  Run the Python initialization code which prepares everything for running the user's main script. The initialization code can use only the Python built-in modules because the general import mechanism is not yet available. It sets up the Python import mechanism to load modules only from archives embedded in the executable. It also adds the attributes frozen and \_MEIPASS to the sys built-in module.
2.  Execute any run-time hooks: first those specified by the user, then any standard ones.
3.  Install python "egg" files. When a module is part of a zip file (.egg), it has been bundled into the ./eggs directory. Installing means appending .egg file names to sys.path. Python automatically detects whether an item in sys.path is a zip file or a directory.
4.  Run the main script.

\[[http://pythonhosted.org/PyInstaller/\#bootloader][http_pythonhosted.org_PyInstaller_bootloader]\]

## py2exe使用参考 ##

\[[http://www.py2exe.org/index.cgi/Tutorial][http_www.py2exe.org_index.cgi_Tutorial]\]

from:[http://blog.csdn.net/pipisorry/article/details/50620122][blog.csdn.net_pipisorry_article_details_50620122]

ref:[Simple guide to using PyInstaller][]

[PyInstaller Manual][]\*

[blog.csdn.net_pipisorry_article_details_50620122]: http://blog.csdn.net/pipisorry/article/details/50620122
[PyInstaller 3.1 _tar.gz]: https://github.com/pyinstaller/pyinstaller/releases/download/v3.1/PyInstaller-3.1.tar.gz
[http_sourceforge.net_projects_pywin32_files_pywin32_Build_20217]: http://sourceforge.net/projects/pywin32/files/pywin32/Build%20217/
[pywin32]: http://blog.csdn.net/pipisorry/article/details/39902327
[Center]: /images/20220731/fe298536d7ff489a867a6c44706e7927.png
[http_upx.sourceforge.net]: http://upx.sourceforge.net/
[http_pythonhosted.org_PyInstaller_using-upx]: http://pythonhosted.org/PyInstaller/#using-upx
[http_pythonhosted.org_PyInstaller_using-spec-files]: http://pythonhosted.org/PyInstaller/#using-spec-files
[python_exe]: http://cloudbbs.org/forum.php?mod=viewthread&tid=13537
[.py_.exe]: http://jingyan.baidu.com/article/f25ef254082ac6482c1b8223.html
[pyinstaller _EXE]: http://blog.csdn.net/fengda2870/article/details/48806373
[pyinstaller]: http://blog.csdn.net/pipisorry/article/details/50620495
[General Options]: http://pythonhosted.org/PyInstaller/#id27
[What to generate]: http://pythonhosted.org/PyInstaller/#id28
[What to bundle_ where to search]: http://pythonhosted.org/PyInstaller/#id29
[How to generate]: http://pythonhosted.org/PyInstaller/#id30
[Windows and Mac OS X specific options]: http://pythonhosted.org/PyInstaller/#id31
[Windows specific options]: http://pythonhosted.org/PyInstaller/#id32
[Windows Side-by-side Assembly searching options _advanced]: http://pythonhosted.org/PyInstaller/#id33
[Mac OS X specific options]: http://pythonhosted.org/PyInstaller/#id34
[Shortening the Command]: http://pythonhosted.org/PyInstaller/#id35
[http_pythonhosted.org_PyInstaller_options]: http://pythonhosted.org/PyInstaller/#options
[QQ_20130403234716.png]: /images/20220731/c55fe09488974e8da40240215dd7c171.png
[http_pythonhosted.org_PyInstaller_how-the-one-file-program-works]: http://pythonhosted.org/PyInstaller/#how-the-one-file-program-works
[activation context]: http://msdn.microsoft.com/en-us/library/windows/desktop/aa374153%28v=vs.85%29.aspx
[http_pythonhosted.org_PyInstaller_bootloader]: http://pythonhosted.org/PyInstaller/#bootloader
[http_www.py2exe.org_index.cgi_Tutorial]: http://www.py2exe.org/index.cgi/Tutorial
[Simple guide to using PyInstaller]: https://bytes.com/topic/python/insights/579554-simple-guide-using-pyinstaller
[PyInstaller Manual]: http://pythonhosted.org/PyInstaller/