linux下编译安装Python with Tkinter

小灰灰 2022-08-14 04:47 9阅读 0赞

在windows下Tkinter为python的默认安装.而在linux下安装Tkinter必需手动修改/modules/setup配置文件,去掉相应选项前的注释符\#. 否则会不能import \_tkinter  
setup修改例:

\# The \_tkinter module.  
\#  
\# The command for \_tkinter is long and site specific. Please  
\# uncomment and/or edit those parts as indicated. If you don't have a  
\# specific extension (e.g. Tix or BLT), leave the corresponding line  
\# commented out. (Leave the trailing backslashes in! If you  
\# experience strange errors, you may want to join all uncommented  
\# lines and remove the backslashes -- the backslash interpretation is  
\# done by the shell's "read" command and it may not be implemented on  
\# every system.  
  
\# \*\*\* Always uncomment this (leave the leading underscore in!):  
\_tkinter \_tkinter.c tkappinit.c -DWITH\_APPINIT /  
\# \*\*\* Uncomment and edit to reflect where your Tcl/Tk libraries are:  
\-L/usr/local/lib /  
\# \*\*\* Uncomment and edit to reflect where your Tcl/Tk headers are:  
\-I/usr/local/include /  
\# \*\*\* Uncomment and edit to reflect where your X11 header files are:  
\-I/usr/X11R6/include /  
\# \*\*\* Or uncomment this for Solaris:  
\# -I/usr/openwin/include /  
\# \*\*\* Uncomment and edit for Tix extension only:  
\# -DWITH\_TIX -ltix8.1.8.2 /  
\# \*\*\* Uncomment and edit for BLT extension only:  
\# -DWITH\_BLT -I/usr/local/blt/blt8.0-unoff/include -lBLT8.0 /  
\# \*\*\* Uncomment and edit for PIL (TkImaging) extension only:  
\# (See http://www.pythonware.com/products/pil/ for more info)  
\# -DWITH\_PIL -I../Extensions/Imaging/libImaging tkImaging.c /  
\# \*\*\* Uncomment and edit for TOGL extension only:  
\# -DWITH\_TOGL togl.c /  
\# \*\*\* Uncomment and edit to reflect your Tcl/Tk versions:  
\-ltk8.4 -ltcl8.4 /  
\# \*\*\* Uncomment and edit to reflect where your X11 libraries are:  
\-L/usr/X11R6/lib /  
\# \*\*\* Or uncomment this for Solaris:  
\# -L/usr/openwin/lib /  
\# \*\*\* Uncomment these for TOGL extension only:  
\# -lGL -lGLU -lXext -lXmu /  
\# \*\*\* Uncomment for AIX:  
\# -lld /  
\# \*\*\* Always uncomment this; X11 libraries to link with:  
\-lX11  
  
再运行  
./configure  
setup  
setup install