andoid电阻触摸移植

亦凉 2022-08-13 12:36 194阅读 0赞

这里我使用的是210的开发板　系统Android4.0.4 内核linux3.0.8

要用电阻屏一般都是使用tslib进行校准的　这里给个我在android上用的tslib

下载地址 [ http://download.csdn.net/detail/hclydao/8074069][http_download.csdn.net_detail_hclydao_8074069]

直接把这个放在android源码external目录下即可　有几点需要注意的

tslib里我改了下Android.mk　以前用的时候应该是模块名input被用了　所以我改成了input1

include $(CLEAR_VARS)
    LOCAL_MODULE_TAGS := eng
    LOCAL_MODULE:= input1
    LOCAL_PRELINK_MODULE := false
    LOCAL_CFLAGS = $(CFLAGS)
    LOCAL_C_INCLUDES = $(C_INCLUDES)
    LOCAL_SRC_FILES =  plugins/input-raw.c
    LOCAL_SHARED_LIBRARIES += libts
    LOCAL_MODULE_PATH := $(TARGET_OUT_SHARED_LIBRARIES)/ts
    include $(BUILD_SHARED_LIBRARY)

所以相应的ts.conf里也要改　我的ts.conf内容如下

# Uncomment if you wish to use the linux input layer event interface
    module_raw input1
    
    # Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d
    # module_raw collie
    
    # Uncomment if you're using a Sharp Zaurus SL-C700/C750/C760/C860
    # module_raw corgi
    
    # Uncomment if you're using a device with a UCB1200/1300/1400 TS interface
    # module_raw ucb1x00
    
    # Uncomment if you're using an HP iPaq h3600 or similar
    # module_raw h3600
    
    # Uncomment if you're using a Hitachi Webpad
    # module_raw mk712
    
    # Uncomment if you're using an IBM Arctic II
    # module_raw arctic2
    
    module pthres pmin=1
    module variance delta=30
    module dejitter delta=100
    module linear

直接放在system/etc/下就可以了　注意上面的

module_raw input1

后面的input1是和上面模块名是一样的

ts.conf最好是系统编译完成后　在拷贝过去　或者可以直接改tslib下的 然后制作文件系统的时候还需要增加相应的几个节点　如下

mkdir rootfs_dir/dev/input
    	mkdir rootfs_dir/dev/graphics
    	mknod rootfs_dir/dev/graphics/fb0 c 29 0
    	mknod rootfs_dir/dev/input/event1  c 13 65

因为我把校准放在了init之前　基本上设备节点都没有　所以这里我自己创建　我的电阻触摸驱动是event1所以这里要加上

然后是calibrate脚本

#!/bin/sh
    export TSLIB_TSDEVICE=/dev/input/event1
    export TSLIB_CALIBFILE=/system/etc/pointercal
    export TSLIB_CONFFILE=/system/etc/ts.conf
    export TSLIB_CONSOLEDEVICE=none
    export TSLIB_FBDEVICE=/dev/graphics/fb0
    export TSLIB_PLUGINDIR=/system/lib/ts
    exec /sbin/ts_calibrate

这里的TSDEVICE和FBDEVICE具体根据你自己的改

然后就是校准后的数据回写到驱动里 校准完成后在执行这个

/system/bin/cat /etc/pointercal > /proc/driver/micc_ts

后面的/proc/driver/micc\_ts根据驱动里来的　这个你可以开个服务执行就可以了

然后就是加个idc这个直接拷贝一个　名字改成你的驱动里的名字就行了　我这里是s3c-ts

文件系统修改基本都是这样了　下面上驱动

/* linux/drivers/input/touchscreen/s3c-ts.c
     *
     * This program is free software; you can redistribute it and/or modify
     * it under the terms of the GNU General Public License as published by
     * the Free Software Foundation; either version 2 of the License, or
     * (at your option) any later version.
     *
     * This program is distributed in the hope that it will be useful,
     * but WITHOUT ANY WARRANTY; without even the implied warranty of
     * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     * GNU General Public License for more details.
     *
     * You should have received a copy of the GNU General Public License
     * along with this program; if not, write to the Free Software
     * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
     *
     * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
     * iPAQ H1940 touchscreen support
     *
     * ChangeLog
     *
     * 2004-09-05: Herbert Potzl <herbert@13thfloor.at>
     *	- added clock (de-)allocation code
     *
     * 2005-03-06: Arnaud Patard <arnaud.patard@rtp-net.org>
     *      - h1940_ -> s3c24xx (this driver is now also used on the n30
     *        machines :P)
     *      - Debug messages are now enabled with the config option
     *        TOUCHSCREEN_S3C_DEBUG
     *      - Changed the way the value are read
     *      - Input subsystem should now work
     *      - Use ioremap and readl/writel
     *
     * 2005-03-23: Arnaud Patard <arnaud.patard@rtp-net.org>
     *      - Make use of some undocumented features of the touchscreen
     *        controller
     *
     * 2006-09-05: Ryu Euiyoul <ryu.real@gmail.com>
     *      - added power management suspend and resume code
     *
     */
    
    #include <linux/errno.h>
    #include <linux/kernel.h>
    #include <linux/module.h>
    #include <linux/slab.h>
    #include <linux/input.h>
    #include <linux/init.h>
    #include <linux/serio.h>
    #include <linux/delay.h>
    #include <linux/platform_device.h>
    #include <linux/clk.h>
    #ifdef CONFIG_HAS_EARLYSUSPEND
    #include <linux/earlysuspend.h>
    #endif
    #include <linux/io.h>
    #include <asm/irq.h>
    #include <mach/hardware.h>
    
    #include <mach/regs-adc.h>
    #include <mach/ts-s3c.h>
    #include <mach/irqs.h>
    #include <linux/proc_fs.h>
    #include <asm/uaccess.h>
    
    /* For ts->dev.id.version */
    #define S3C_TSVERSION	0x0101
    
    #define WAIT4INT(x)	(((x)<<8) | \
    			S3C_ADCTSC_YM_SEN | S3C_ADCTSC_YP_SEN | \
    			S3C_ADCTSC_XP_SEN | S3C_ADCTSC_XY_PST(3))
    
    #define AUTOPST	(S3C_ADCTSC_YM_SEN | S3C_ADCTSC_YP_SEN | \
    		 S3C_ADCTSC_XP_SEN | S3C_ADCTSC_AUTO_PST | \
    		 S3C_ADCTSC_XY_PST(0))
    
    #ifdef CONFIG_HAS_EARLYSUSPEND
    static void ts_early_suspend(struct early_suspend *h);
    static void ts_late_resume(struct early_suspend *h);
    #endif
    
    /* Touchscreen default configuration */
    struct s3c_ts_mach_info s3c_ts_default_cfg __initdata = {
    	.delay			= 10000,
    	.presc			= 49,
    	.oversampling_shift	= 2,
    	.resol_bit		= 10
    };
    
    /*
     * Definitions & global arrays.
     */
    static char *s3c_ts_name = "s3c-ts";
    static void __iomem		*ts_base;
    static struct resource		*ts_mem;
    static struct resource		*ts_irq;
    static struct clk		*ts_clock;
    static struct s3c_ts_info	*ts;
    
    static struct proc_dir_entry *ts_proc_entry;
    
    signed long pointercal[7] = {1,0,0,0,1,0,1};
    
    static int SCREEN_X=800;
    static int SCREEN_Y=480;
    
    #define  TSNUM  8
    static   int  ts_x[TSNUM];
    static   int  ts_y[TSNUM];
    //上层回写保存上层tslib校准后的数据
    static int ts_proc_write(struct file *file, const char *buffer,
    			     unsigned long count, void *data)
    {
    	char buf[256];
    	unsigned long len;
    	char *p = (char *)buf;
    	int i,j;
    	int flag = 1;
    	memset(buf,0,256);
    	len = min_t(unsigned long, sizeof(buf) - 1, count);
    
    	if (copy_from_user(buf, buffer, len))
    		return count;
    
    	j = 0;
    	for(i=0;i<len;i++)
    	{
    		if(flag)
    		{
    			pointercal[j] = simple_strtol(p, &p, 10);
    			j++; 
    			if(j>=7)
    				break;
    			flag = 0;
    		}
    
    		if(p[0] == ' ')
    		{
    			flag = 1;
    		}
    		if(p[0] == '\t')
    		{
    			flag = 1;
    		}
    		p++;
    	}
    	return count;
    }
    
    static void data_select() {
    }
    
    static void touch_timer_fire(unsigned long data)
    {
    	unsigned long data0;
    	unsigned long data1;
    	int updown;
    	int x, y;
    	long a,b,c,d,e,f,div;
    	int i,j,tmp;
    
    	data0 = readl(ts_base+S3C_ADCDAT0);
    	data1 = readl(ts_base+S3C_ADCDAT1);
    
    	updown = (!(data0 & S3C_ADCDAT0_UPDOWN)) &&
    		 (!(data1 & S3C_ADCDAT1_UPDOWN));
    
    	if (updown) {
    		if (ts->count) {
    			a = pointercal[0];
    			b = pointercal[1];
    			c = pointercal[2];
    			d = pointercal[3];
    			e = pointercal[4];
    			f = pointercal[5];
    			div = pointercal[6];
    			for(j=(TSNUM-1);j>0;j--)
    			  for(i = 0; i < j;i++)
    			  {	
    			      if (ts_x[i] < ts_x[i+1])
    			      {
    					tmp = ts_x[i+1];
    					ts_x[i+1]  = ts_x[i];
    					ts_x[i] = tmp;
    			      }
    			     if (ts_y[i] < ts_y[i+1])
    			      {
    					tmp = ts_y[i+1];
    					ts_y[i+1]  = ts_y[i];
    					ts_y[i] = tmp;
    			      }
    	
    			 }  
    
    			tmp = 0;
    			for (i=TSNUM/4;i<(TSNUM*3/4);i++)
    			   tmp+=ts_x[i];
    			ts->xp = tmp*2/TSNUM;
    
    			tmp = 0;
    			for (i=TSNUM/4;i<(TSNUM*3/4);i++)
    			   tmp+=ts_y[i];
    			ts->yp  = tmp*2/TSNUM;
                            //校准后上报
    			x = (a*ts->xp + b*ts->yp + c)/div;
    			y = (d*ts->xp + e*ts->yp + f)/div;
    			input_report_abs(ts->dev, ABS_X, x);
    			input_report_abs(ts->dev, ABS_Y, y);
    
    			input_report_key(ts->dev, BTN_TOUCH, 1);
    			input_report_abs(ts->dev, ABS_PRESSURE, 1);//这个地方要注意前面是abs
    			input_sync(ts->dev);
    		}
    
    		ts->xp = 0;
    		ts->yp = 0;
    		ts->count = 0;
    
    		writel(S3C_ADCTSC_PULL_UP_DISABLE | AUTOPST,
    				ts_base + S3C_ADCTSC);
    		writel(readl(ts_base+S3C_ADCCON) | S3C_ADCCON_ENABLE_START,
    				ts_base + S3C_ADCCON);
    	} else {
    		ts->count = 0;
    		input_report_key(ts->dev, BTN_TOUCH, 0);
    		input_report_abs(ts->dev, ABS_PRESSURE, 0);
    		input_sync(ts->dev);
    		writel(WAIT4INT(0), ts_base+S3C_ADCTSC);
    	}
    }
    
    static struct timer_list touch_timer =
    		TIMER_INITIALIZER(touch_timer_fire, 0, 0);
    
    static irqreturn_t stylus_updown(int irqno, void *param)
    {
    	unsigned long data0;
    	unsigned long data1;
    	int updown;
    
    	data0 = readl(ts_base + S3C_ADCDAT0);
    	data1 = readl(ts_base + S3C_ADCDAT1);
    	updown = (!(data0 & S3C_ADCDAT0_UPDOWN)) &&
    		 (!(data1 & S3C_ADCDAT1_UPDOWN));
    
    	/* TODO we should never get an interrupt with updown set while
    	 * the timer is running, but maybe we ought to verify that the
    	 * timer isn't running anyways. */
    
    	if (updown)
    		touch_timer_fire(0);
    
    	if (ts->s3c_adc_con == ADC_TYPE_2) {
    		__raw_writel(0x0, ts_base + S3C_ADCCLRWK);
    		__raw_writel(0x0, ts_base + S3C_ADCCLRINT);
    	}
    
    	return IRQ_HANDLED;
    }
    
    static irqreturn_t stylus_action(int irqno, void *param)
    {
    	unsigned long data0;
    	unsigned long data1;
    
    	data0 = readl(ts_base + S3C_ADCDAT0);
    	data1 = readl(ts_base + S3C_ADCDAT1);
    	if (ts->resol_bit == 12) {
    		ts_x[ts->count] =  (data0 & S3C_ADCDAT0_XPDATA_MASK_12BIT);
    		ts_y[ts->count] =  data1 & S3C_ADCDAT1_YPDATA_MASK_12BIT;
    	} else {
    		ts_x[ts->count] = S3C_ADCDAT0_XPDATA_MASK_12BIT - (data0 & S3C_ADCDAT0_XPDATA_MASK_12BIT);
    		ts_y[ts->count] = S3C_ADCDAT1_YPDATA_MASK_12BIT - (data1 & S3C_ADCDAT1_YPDATA_MASK_12BIT);
    	}
    
    	ts->count++;
    
    	if (ts->count < TSNUM) {
    		writel(S3C_ADCTSC_PULL_UP_DISABLE | AUTOPST,
    				ts_base + S3C_ADCTSC);
    		writel(readl(ts_base + S3C_ADCCON) | S3C_ADCCON_ENABLE_START,
    				ts_base + S3C_ADCCON);
    	} else {
    		mod_timer(&touch_timer, jiffies + 1);
    		writel(WAIT4INT(1), ts_base + S3C_ADCTSC);
    	}
    
    	if (ts->s3c_adc_con == ADC_TYPE_2) {
    		__raw_writel(0x0, ts_base+S3C_ADCCLRWK);
    		__raw_writel(0x0, ts_base+S3C_ADCCLRINT);
    	}
    	return IRQ_HANDLED;
    }
    
    static struct s3c_ts_mach_info *s3c_ts_get_platdata(struct device *dev)
    {
    	if (dev->platform_data != NULL)
    		return (struct s3c_ts_mach_info *)dev->platform_data;
    
    	return &s3c_ts_default_cfg;
    }
    
    /*
     * The functions for inserting/removing us as a module.
     */
    static int __init s3c_ts_probe(struct platform_device *pdev)
    {
    	struct resource *res;
    	struct device *dev;
    	struct input_dev *input_dev;
    	struct s3c_ts_mach_info *s3c_ts_cfg;
    	int ret, size;
    	int irq_flags = 0;
    #if defined(CONFIG_FB_S3C_AT070)
    		SCREEN_X = 800;
    		SCREEN_Y = 480;
    #endif
    	dev = &pdev->dev;
    
    	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
    	if (res == NULL) {
    		dev_err(dev, "no memory resource specified\n");
    		return -ENOENT;
    	}
    
    	size = (res->end - res->start) + 1;
    	ts_mem = request_mem_region(res->start, size, pdev->name);
    	if (ts_mem == NULL) {
    		dev_err(dev, "failed to get memory region\n");
    		ret = -ENOENT;
    		goto err_req;
    	}
    
    	ts_base = ioremap(res->start, size);
    	if (ts_base == NULL) {
    		dev_err(dev, "failed to ioremap() region\n");
    		ret = -EINVAL;
    		goto err_map;
    	}
    
    	ts_clock = clk_get(&pdev->dev, "adc");
    	if (IS_ERR(ts_clock)) {
    		dev_err(dev, "failed to find watchdog clock source\n");
    		ret = PTR_ERR(ts_clock);
    		goto err_clk;
    	}
    
    	clk_enable(ts_clock);
    
    	s3c_ts_cfg = s3c_ts_get_platdata(&pdev->dev);
    	if ((s3c_ts_cfg->presc & 0xff) > 0)
    		writel(S3C_ADCCON_PRSCEN |
    				S3C_ADCCON_PRSCVL(s3c_ts_cfg->presc & 0xFF),
    				ts_base+S3C_ADCCON);
    	else
    		writel(0, ts_base + S3C_ADCCON);
    
    	/* Initialise registers */
    	if ((s3c_ts_cfg->delay & 0xffff) > 0)
    		writel(s3c_ts_cfg->delay & 0xffff, ts_base + S3C_ADCDLY);
    
    	if (s3c_ts_cfg->resol_bit == 12) {
    		switch (s3c_ts_cfg->s3c_adc_con) {
    		case ADC_TYPE_2:
    			writel(readl(ts_base + S3C_ADCCON) |
    					S3C_ADCCON_RESSEL_12BIT,
    					ts_base + S3C_ADCCON);
    			break;
    
    		case ADC_TYPE_1:
    			writel(readl(ts_base + S3C_ADCCON) |
    					S3C_ADCCON_RESSEL_12BIT_1,
    					ts_base + S3C_ADCCON);
    			break;
    
    		default:
    			dev_err(dev, "this type of AP isn't supported !\n");
    			break;
    		}
    	}
    
    	writel(WAIT4INT(0), ts_base + S3C_ADCTSC);
    
    	ts = kzalloc(sizeof(struct s3c_ts_info), GFP_KERNEL);
    
    	input_dev = input_allocate_device();
    	if (!input_dev) {
    		ret = -ENOMEM;
    		goto err_alloc;
    	}
    
    	ts->dev = input_dev;
    
    	ts->dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
    	ts->dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
    
    	if (s3c_ts_cfg->resol_bit == 12) {
    		input_set_abs_params(ts->dev,ABS_X, 0, SCREEN_X, 0, 0);
    		input_set_abs_params(ts->dev,ABS_Y, 0, SCREEN_Y, 0, 0);
    	} else {
    		input_set_abs_params(ts->dev, ABS_X, 0, SCREEN_X, 0, 0);
    		input_set_abs_params(ts->dev, ABS_Y, 0, SCREEN_Y, 0, 0);
    	}
    
    	input_set_abs_params(ts->dev, ABS_PRESSURE, 0, 1, 0, 0);
    
    	sprintf(ts->phys, "input(ts)");
    
    	ts->dev->name = s3c_ts_name;//文件系统里idc名字与这个要一致
    	ts->dev->phys = ts->phys;
    	ts->dev->id.bustype = BUS_RS232;
    	ts->dev->id.vendor = 0xDEAD;
    	ts->dev->id.product = 0xBEEF;
    	ts->dev->id.version = S3C_TSVERSION;
    
    	ts->shift = s3c_ts_cfg->oversampling_shift;
    	ts->resol_bit = s3c_ts_cfg->resol_bit;
    	ts->s3c_adc_con = s3c_ts_cfg->s3c_adc_con;
    
    #ifdef CONFIG_HAS_EARLYSUSPEND
    	ts->early_suspend.level = EARLY_SUSPEND_LEVEL_BLANK_SCREEN + 1;
    	ts->early_suspend.suspend = ts_early_suspend;
    	ts->early_suspend.resume = ts_late_resume;
    	register_early_suspend(&ts->early_suspend);
    #endif
    
    	/* For IRQ_PENDUP */
    	ts_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
    	if (ts_irq == NULL) {
    		dev_err(dev, "no irq resource specified\n");
    		ret = -ENOENT;
    		goto err_irq;
    	}
    
    	ret = request_irq(ts_irq->start, stylus_updown, irq_flags,
    			"s3c_updown", ts);
    	if (ret != 0) {
    		dev_err(dev, "s3c_ts.c: Could not allocate ts IRQ_PENDN !\n");
    		ret = -EIO;
    		goto err_irq;
    	}
    
    	/* For IRQ_ADC */
    	ts_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
    	if (ts_irq == NULL) {
    		dev_err(dev, "no irq resource specified\n");
    		ret = -ENOENT;
    		goto err_irq;
    	}
    
    	ret = request_irq(ts_irq->start, stylus_action, irq_flags,
    			"s3c_action", ts);
    	if (ret != 0) {
    		dev_err(dev, "s3c_ts.c: Could not allocate ts IRQ_ADC !\n");
    		ret =  -EIO;
    		goto err_irq;
    	}
    
    	printk(KERN_INFO "%s got loaded successfully : %d bits\n",
    			s3c_ts_name, s3c_ts_cfg->resol_bit);
    
    	/* All went ok, so register to the input system */
    	ret = input_register_device(ts->dev);
    	if (ret) {
    		dev_err(dev, "Could not register input device(touchscreen)!\n");
    		ret = -EIO;
    		goto fail;
    	}
    
    	ts_proc_entry = create_proc_entry("driver/micc_ts", 0, NULL); //创建上层节点  
    	if (ts_proc_entry) {   
    		ts_proc_entry->write_proc = ts_proc_write;   
    	}  
    
    	return 0;
    
    fail:
    	free_irq(ts_irq->start, ts->dev);
    	free_irq(ts_irq->end, ts->dev);
    
    err_irq:
    	input_free_device(input_dev);
    	kfree(ts);
    
    err_alloc:
    	clk_disable(ts_clock);
    	clk_put(ts_clock);
    
    err_clk:
    	iounmap(ts_base);
    
    err_map:
    	release_resource(ts_mem);
    	kfree(ts_mem);
    
    err_req:
    	return ret;
    }
    
    static int s3c_ts_remove(struct platform_device *dev)
    {
    	printk(KERN_INFO "s3c_ts_remove() of TS called !\n");
    
    	disable_irq(IRQ_ADC);
    	disable_irq(IRQ_PENDN);
    
    	free_irq(IRQ_PENDN, ts->dev);
    	free_irq(IRQ_ADC, ts->dev);
    
    	if (ts_clock) {
    		clk_disable(ts_clock);
    		clk_put(ts_clock);
    		ts_clock = NULL;
    	}
    
    #ifdef CONFIG_HAS_EARLYSUSPEND
         unregister_early_suspend(&ts->early_suspend);
    #endif
    
    	input_unregister_device(ts->dev);
    	iounmap(ts_base);
    
    	return 0;
    }
    
    #ifdef CONFIG_PM
    static unsigned int adccon, adctsc, adcdly;
    
    static int s3c_ts_suspend(struct platform_device *dev, pm_message_t state)
    {
    	adccon = readl(ts_base+S3C_ADCCON);
    	adctsc = readl(ts_base+S3C_ADCTSC);
    	adcdly = readl(ts_base+S3C_ADCDLY);
    
    	disable_irq(IRQ_ADC);
    	disable_irq(IRQ_PENDN);
    
    	clk_disable(ts_clock);
    
    	return 0;
    }
    
    static int s3c_ts_resume(struct platform_device *pdev)
    {
    	clk_enable(ts_clock);
    
    	writel(adccon, ts_base+S3C_ADCCON);
    	writel(adctsc, ts_base+S3C_ADCTSC);
    	writel(adcdly, ts_base+S3C_ADCDLY);
    	writel(WAIT4INT(0), ts_base+S3C_ADCTSC);
    
    	enable_irq(IRQ_ADC);
    	enable_irq(IRQ_PENDN);
    
    	return 0;
    }
    #else
    #define s3c_ts_suspend NULL
    #define s3c_ts_resume  NULL
    #endif
    
    #ifdef CONFIG_HAS_EARLYSUSPEND
    static void ts_early_suspend(struct early_suspend *h)
    {
    	struct s3c_ts_info *ts;
    	ts = container_of(h, struct s3c_ts_info, early_suspend);
    	s3c_ts_suspend(NULL, PMSG_SUSPEND);
    }
    
    static void ts_late_resume(struct early_suspend *h)
    {
    	struct s3c_ts_info *ts;
    	ts = container_of(h, struct s3c_ts_info, early_suspend);
    	s3c_ts_resume(NULL);
    }
    #endif
    
    static struct platform_driver s3c_ts_driver = {
           .probe          = s3c_ts_probe,
           .remove         = s3c_ts_remove,
           .suspend        = s3c_ts_suspend,
           .resume         = s3c_ts_resume,
           .driver		= {
    		.owner	= THIS_MODULE,
    		.name	= "s3c-ts",
    	},
    };
    
    static char banner[] __initdata = KERN_INFO \
    		"S5P Touchscreen driver, (c) 2008 Samsung Electronics\n";
    
    static int __init s3c_ts_init(void)
    {
    	printk(banner);
    	return platform_driver_register(&s3c_ts_driver);
    }
    
    static void __exit s3c_ts_exit(void)
    {
    	platform_driver_unregister(&s3c_ts_driver);
    }
    
    module_init(s3c_ts_init);
    module_exit(s3c_ts_exit);
    
    MODULE_AUTHOR("Samsung AP");
    MODULE_DESCRIPTION("S5P touchscreen driver");
    MODULE_LICENSE("GPL");

只是在ＡＤＣ驱动里加了一些东西　具体ＡＤＣ驱动就不说了　大致的一些解释都写上面了　基本上就这个样了

修改完成后　测试效果还是不错地.

[http_download.csdn.net_detail_hclydao_8074069]: http://download.csdn.net/detail/hclydao/8074069