Lighttpd on FreeBSD

刺骨的言语ヽ痛彻心扉 2022-08-12 01:27 158阅读 0赞

http://redmine.lighttpd.net/projects/lighttpd/wiki/HowToInstallOnFreeBSD

(If you don't want PHP skip step 2)

### Step 1. Verify ports installation[¶][Link 1] ###

You should have a recent ports tree installed on your system. If you have not updated your ports tree recently, please do so before continuing. If you do not have a ports tree installed, you can use the portsnap utility to install or update it. I find this to be an extreemly quick way (under 15 minutes on a decent broadband connection) to install the full ports tree. And you don't even have to worry about cvsup or setting up configuration files.

Download most recent ports snapshot:

$ sudo portsnap fetch
       or
    # portsnap fetch

Example output:

Looking up portsnap.FreeBSD.org mirrors... 2 mirrors found.
    Fetching public key from portsnap1.FreeBSD.org... done.
    Fetching snapshot tag from portsnap1.FreeBSD.org... done.
    Fetching snapshot metadata... done.
    Fetching snapshot generated at Fri Mar 16 19:19:25 CDT 2007:
    dbc38dfcfd2f738fc6ffa7c9d6b1b583982a39c19db371 32% of   46 MB  212 kBps 02m33s
     (... download continues ...)
    dbc38dfcfd2f738fc6ffa7c9d6b1b583982a39c19db371100% of   46 MB  202 kBps 00m00s
    Extracting snapshot... done.
    Verifying snapshot integrity... done.
    Fetching snapshot tag from portsnap1.FreeBSD.org... done.
    Fetching snapshot metadata... done.
    Updating from Fri Mar 16 19:19:25 CDT 2007 to Sat Mar 17 04:02:50 CDT 2007.
    Fetching 3 metadata patches.. done.
    Applying metadata patches... done.
    Fetching 0 metadata files... done.
    Fetching 19 patches.....10.... done.
    Applying patches... done.
    Fetching 4 new ports or files... done.*

Extract snapshot:

$ sudo portsnap extract
       or
     # portsnap extract

Example output:

(... a lot of directories ...)
    /usr/ports/x11/xsnow/
    /usr/ports/x11/xstarroll/
    /usr/ports/x11/xstroke/
    /usr/ports/x11/xtacy/
    /usr/ports/x11/xtattr/
    /usr/ports/x11/xterm/
    /usr/ports/x11/xtermcontrol/
    /usr/ports/x11/xtermset/
    /usr/ports/x11/xtestpicture/
    /usr/ports/x11/xtoolwait/
    /usr/ports/x11/xtrlock/
    /usr/ports/x11/xtset/
    /usr/ports/x11/xvattr/
    /usr/ports/x11/xvkbd/
    /usr/ports/x11/xwatchwin/
    /usr/ports/x11/xwit/
    /usr/ports/x11/xxkb/
    /usr/ports/x11/xzoom/
    /usr/ports/x11/yakuake/
    /usr/ports/x11/yalias/
    /usr/ports/x11/yelp/
    /usr/ports/x11/zenity/
    Building new INDEX files... done.

### Step 2. Install PHP 5[¶][Link 2] ###

cd /usr/ports/lang/php5
    
    $ sudo make config
       or
    # make config

Verify that CGI and FastCGI are checked (default), and you want to enable REDIRECT as well. Choose ok. (Perhaps discard-path support as well?)

Now to compile and install it:

$ sudo make install clean
       or
    # make install clean

### Step 3. Install lighttpd[¶][Link 3] ###

cd /usr/ports/www/lighttpd
    
    $ sudo make config
       or
    # make config

Verify whatever options you want for your installation of lighttpd.

Now to compile and install it:

$ sudo make install clean
       or
    # make install clean

### Step 4. Post install configuration[¶][Link 4] ###

Refer to [TutorialLighttpdAndPHP][] for more fun.

[Link 1]: http://redmine.lighttpd.net/projects/lighttpd/wiki/HowToInstallOnFreeBSD#Step-1-Verify-ports-installation
[Link 2]: http://redmine.lighttpd.net/projects/lighttpd/wiki/HowToInstallOnFreeBSD#Step-2-Install-PHP-5
[Link 3]: http://redmine.lighttpd.net/projects/lighttpd/wiki/HowToInstallOnFreeBSD#Step-3-Install-lighttpd
[Link 4]: http://redmine.lighttpd.net/projects/lighttpd/wiki/HowToInstallOnFreeBSD#Step-4-Post-install-configuration
[TutorialLighttpdAndPHP]: http://redmine.lighttpd.net/projects/lighttpd/wiki/TutorialLighttpdAndPHP