coe_xfr_sql_profile.sql

Bertha 。 2022-08-08 05:26 115阅读 0赞

SPO coe_xfr_sql_profile.log; 
    SET DEF ON TERM OFF ECHO ON FEED OFF VER OFF HEA ON LIN 2000 PAGES 100 LONG 8000000 LONGC 800000 TRIMS ON TI OFF TIMI OFF SERVEROUT ON SIZE 1000000 NUMF "" SQLP SQL>; 
    SET SERVEROUT ON SIZE UNL; 
    REM 
    REM $Header: 215187.1 coe_xfr_sql_profile.sql 11.4.3.5 2011/08/10 carlos.sierra $ 
    REM 
    REM Copyright (c) 2000-2011, Oracle Corporation. All rights reserved. 
    REM 
    REM AUTHOR 
    REM carlos.sierra@oracle.com 
    REM 
    REM SCRIPT 
    REM coe_xfr_sql_profile.sql 
    REM 
    REM DESCRIPTION 
    REM This script generates another that contains the commands to 
    REM create a manual custom SQL Profile out of a known plan from 
    REM memory or AWR. The manual custom profile can be implemented 
    REM into the same SOURCE system where the plan was retrieved, 
    REM or into another similar TARGET system that has same schema 
    REM objects referenced by the SQL that generated the known plan. 
    REM 
    REM PRE-REQUISITES 
    REM 1. Oracle Tuning Pack license. 
    REM 
    REM PARAMETERS 
    REM 1. SQL_ID (required) 
    REM 2. Plan Hash Value for which a manual custom SQL Profile is 
    REM needed (required). A list of known plans is presented. 
    REM 
    REM EXECUTION 
    REM 1. Connect into SQL*Plus as SYSDBA or user with access to 
    REM data dictionary. 
    REM 2. Execute script coe_xfr_sql_profile.sql passing SQL_ID and 
    REM plan hash value (parameters can be passed inline or until 
    REM requested). 
    REM 
    REM EXAMPLE 
    REM # sqlplus system 
    REM SQL> START coe_xfr_sql_profile.sql [SQL_ID] [PLAN_HASH_VALUE]; 
    REM SQL> START coe_xfr_sql_profile.sql gnjy0mn4y9pbm 2055843663; 
    REM SQL> START coe_xfr_sql_profile.sql gnjy0mn4y9pbm; 
    REM SQL> START coe_xfr_sql_profile.sql; 
    REM 
    REM NOTES 
    REM 1. For possible errors see coe_xfr_sql_profile.log 
    REM 2. If SQLT is installed in SOURCE, you can use instead: 
    REM sqlt/utl/sqltprofile.sql 
    REM 3. Be aware that using DBMS_SQLTUNE requires a license for 
    REM Oracle Tuning Pack. 
    REM 
    SET TERM ON ECHO OFF; 
    PRO 
    PRO Parameter 1: 
    PRO SQL_ID (required) 
    PRO 
    DEF sql_id = '&1'; 
    PRO 
    WITH 
    p AS ( 
    SELECT plan_hash_value 
      FROM gv$sql_plan 
     WHERE sql_id = TRIM('&&sql_id.') 
       AND other_xml IS NOT NULL 
     UNION 
    SELECT plan_hash_value 
      FROM dba_hist_sql_plan 
     WHERE sql_id = TRIM('&&sql_id.') 
       AND other_xml IS NOT NULL ), 
    m AS ( 
    SELECT plan_hash_value, 
           SUM(elapsed_time)/SUM(executions) avg_et_secs 
      FROM gv$sql 
     WHERE sql_id = TRIM('&&sql_id.') 
       AND executions > 0 
     GROUP BY 
           plan_hash_value ), 
    a AS ( 
    SELECT plan_hash_value, 
           SUM(elapsed_time_total)/SUM(executions_total) avg_et_secs 
      FROM dba_hist_sqlstat 
     WHERE sql_id = TRIM('&&sql_id.') 
       AND executions_total > 0 
     GROUP BY 
           plan_hash_value ) 
    SELECT p.plan_hash_value, 
           ROUND(NVL(m.avg_et_secs, a.avg_et_secs)/1e6, 3) avg_et_secs 
      FROM p, m, a 
     WHERE p.plan_hash_value = m.plan_hash_value(+) 
       AND p.plan_hash_value = a.plan_hash_value(+) 
     ORDER BY 
           avg_et_secs NULLS LAST; 
    PRO 
    PRO Parameter 2: 
    PRO PLAN_HASH_VALUE (required) 
    PRO 
    DEF plan_hash_value = '&2'; 
    PRO 
    PRO Values passed to coe_xfr_sql_profile: 
    PRO ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 
    PRO SQL_ID : "&&sql_id." 
    PRO PLAN_HASH_VALUE: "&&plan_hash_value." 
    PRO 
    SET TERM OFF ECHO ON; 
    WHENEVER SQLERROR EXIT SQL.SQLCODE; 
    
    -- trim parameters 
    COL sql_id NEW_V sql_id FOR A30; 
    COL plan_hash_value NEW_V plan_hash_value FOR A30; 
    SELECT TRIM('&&sql_id.') sql_id, TRIM('&&plan_hash_value.') plan_hash_value FROM DUAL; 
    
    VAR sql_text CLOB; 
    VAR other_xml CLOB; 
    EXEC :sql_text := NULL; 
    EXEC :other_xml := NULL; 
    
    -- get sql_text from memory 
    DECLARE 
      l_sql_text VARCHAR2(32767); 
    BEGIN -- 10g see bug 5017909 
      FOR i IN (SELECT DISTINCT piece, sql_text 
                  FROM gv$sqltext_with_newlines 
                 WHERE sql_id = TRIM('&&sql_id.') 
                 ORDER BY 1, 2) 
      LOOP 
        IF :sql_text IS NULL THEN 
          DBMS_LOB.CREATETEMPORARY(:sql_text, TRUE); 
          DBMS_LOB.OPEN(:sql_text, DBMS_LOB.LOB_READWRITE); 
        END IF; 
        l_sql_text := REPLACE(i.sql_text, CHR(00), ' '); 
        DBMS_LOB.WRITEAPPEND(:sql_text, LENGTH(l_sql_text), l_sql_text); 
      END LOOP; 
      IF :sql_text IS NOT NULL THEN 
        DBMS_LOB.CLOSE(:sql_text); 
      END IF; 
    EXCEPTION 
      WHEN OTHERS THEN 
        DBMS_OUTPUT.PUT_LINE('getting sql_text from memory: '||SQLERRM); 
        :sql_text := NULL; 
    END; 
    / 
    
    -- get sql_text from awr 
    BEGIN 
      IF :sql_text IS NULL OR NVL(DBMS_LOB.GETLENGTH(:sql_text), 0) = 0 THEN 
        SELECT REPLACE(sql_text, CHR(00), ' ') 
          INTO :sql_text 
          FROM dba_hist_sqltext 
         WHERE sql_id = TRIM('&&sql_id.') 
           AND sql_text IS NOT NULL 
           AND ROWNUM = 1; 
      END IF; 
    EXCEPTION 
      WHEN OTHERS THEN 
        DBMS_OUTPUT.PUT_LINE('getting sql_text from awr: '||SQLERRM); 
        :sql_text := NULL; 
    END; 
    / 
    
    SELECT :sql_text FROM DUAL; 
    
    -- validate sql_text 
    SET TERM ON; 
    BEGIN 
      IF :sql_text IS NULL THEN 
        RAISE_APPLICATION_ERROR(-20100, 'SQL_TEXT for SQL_ID &&sql_id. was not found in memory (gv$sqltext_with_newlines) or AWR (dba_hist_sqltext).'); 
      END IF; 
    END; 
    / 
    SET TERM OFF; 
    
    -- to avoid errors when sql_text lacks LFs and is more than 2000 bytes 
    BEGIN 
      :sql_text := REPLACE(:sql_text, ')', ')'||CHR(10)); 
      :sql_text := REPLACE(:sql_text, ',', ','||CHR(10)); 
      -- remove consecutive LFs 
      :sql_text := REPLACE(:sql_text, CHR(10)||CHR(10)||CHR(10)||CHR(10)||CHR(10), CHR(10)); 
      :sql_text := REPLACE(:sql_text, CHR(10)||CHR(10)||CHR(10), CHR(10)); 
      :sql_text := REPLACE(:sql_text, CHR(10)||CHR(10), CHR(10)); 
    END; 
    / 
    
    SELECT :sql_text FROM DUAL; 
    
    -- get other_xml from memory 
    BEGIN 
      FOR i IN (SELECT other_xml 
                  FROM gv$sql_plan 
                 WHERE sql_id = TRIM('&&sql_id.') 
                   AND plan_hash_value = TO_NUMBER(TRIM('&&plan_hash_value.')) 
                   AND other_xml IS NOT NULL 
                 ORDER BY 
                       child_number, id) 
      LOOP 
        :other_xml := i.other_xml; 
        EXIT; -- 1st 
      END LOOP; 
    EXCEPTION 
      WHEN OTHERS THEN 
        DBMS_OUTPUT.PUT_LINE('getting other_xml from memory: '||SQLERRM); 
        :other_xml := NULL; 
    END; 
    / 
    
    -- get other_xml from awr 
    BEGIN 
      IF :other_xml IS NULL OR NVL(DBMS_LOB.GETLENGTH(:other_xml), 0) = 0 THEN 
        FOR i IN (SELECT other_xml 
                    FROM dba_hist_sql_plan 
                   WHERE sql_id = TRIM('&&sql_id.') 
                     AND plan_hash_value = TO_NUMBER(TRIM('&&plan_hash_value.')) 
                     AND other_xml IS NOT NULL 
                   ORDER BY 
                         id) 
        LOOP 
          :other_xml := i.other_xml; 
          EXIT; -- 1st 
        END LOOP; 
      END IF; 
    EXCEPTION 
      WHEN OTHERS THEN 
        DBMS_OUTPUT.PUT_LINE('getting other_xml from awr: '||SQLERRM); 
        :other_xml := NULL; 
    END; 
    / 
    
    SELECT :other_xml FROM DUAL; 
    
    -- validate other_xml 
    SET TERM ON; 
    BEGIN 
      IF :other_xml IS NULL THEN 
        RAISE_APPLICATION_ERROR(-20101, 'PLAN for SQL_ID &&sql_id. and PHV &&plan_hash_value. was not found in memory (gv$sql_plan) or AWR (dba_hist_sql_plan).'); 
      END IF; 
    END; 
    / 
    SET TERM OFF;
     
    -- generates script that creates sql profile in target system: 
    SET ECHO OFF; 
    PRO coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql. 
    SET FEED OFF LIN 666 TRIMS ON TI OFF TIMI OFF SERVEROUT ON SIZE 1000000 FOR WOR; 
    SET SERVEROUT ON SIZE UNL FOR WOR; 
    SPO OFF; 
    SPO coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql; 
    DECLARE 
      l_pos NUMBER; 
      l_hint VARCHAR2(32767); 
    BEGIN 
      DBMS_OUTPUT.PUT_LINE('SPO coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..log;'); 
      DBMS_OUTPUT.PUT_LINE('SET ECHO ON TERM ON LIN 2000 TRIMS ON NUMF 99999999999999999999;'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('REM $Header: 215187.1 coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql 11.4.3.5 '||TO_CHAR(SYSDATE, 'YYYY/MM/DD')||' carlos.sierra $'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('REM Copyright (c) 2000-2011, Oracle Corporation. All rights reserved.'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('REM AUTHOR'); 
      DBMS_OUTPUT.PUT_LINE('REM carlos.sierra@oracle.com'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('REM SCRIPT'); 
      DBMS_OUTPUT.PUT_LINE('REM coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('REM DESCRIPTION'); 
      DBMS_OUTPUT.PUT_LINE('REM This script is generated by coe_xfr_sql_profile.sql'); 
      DBMS_OUTPUT.PUT_LINE('REM It contains the SQL*Plus commands to create a custom'); 
      DBMS_OUTPUT.PUT_LINE('REM SQL Profile for SQL_ID &&sql_id. based on plan hash'); 
      DBMS_OUTPUT.PUT_LINE('REM value &&plan_hash_value..'); 
      DBMS_OUTPUT.PUT_LINE('REM The custom SQL Profile to be created by this script'); 
      DBMS_OUTPUT.PUT_LINE('REM will affect plans for SQL commands with signature'); 
      DBMS_OUTPUT.PUT_LINE('REM matching the one for SQL Text below.'); 
      DBMS_OUTPUT.PUT_LINE('REM Review SQL Text and adjust accordingly.'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('REM PARAMETERS'); 
      DBMS_OUTPUT.PUT_LINE('REM None.'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('REM EXAMPLE'); 
      DBMS_OUTPUT.PUT_LINE('REM SQL> START coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql;'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('REM NOTES'); 
      DBMS_OUTPUT.PUT_LINE('REM 1. Should be run as SYSTEM or SYSDBA.'); 
      DBMS_OUTPUT.PUT_LINE('REM 2. User must have CREATE ANY SQL PROFILE privilege.'); 
      DBMS_OUTPUT.PUT_LINE('REM 3. SOURCE and TARGET systems can be the same or similar.'); 
      DBMS_OUTPUT.PUT_LINE('REM 4. To drop this custom SQL Profile after it has been created:'); 
      DBMS_OUTPUT.PUT_LINE('REM EXEC DBMS_SQLTUNE.DROP_SQL_PROFILE(''coe_&&sql_id._&&plan_hash_value.'');'); 
      DBMS_OUTPUT.PUT_LINE('REM 5. Be aware that using DBMS_SQLTUNE requires a license'); 
      DBMS_OUTPUT.PUT_LINE('REM for the Oracle Tuning Pack.'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('WHENEVER SQLERROR EXIT SQL.SQLCODE;'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('VAR signature NUMBER;'); 
      DBMS_OUTPUT.PUT_LINE('REM'); 
      DBMS_OUTPUT.PUT_LINE('DECLARE'); 
      DBMS_OUTPUT.PUT_LINE('sql_txt CLOB;'); 
      DBMS_OUTPUT.PUT_LINE('h SYS.SQLPROF_ATTR;'); 
      DBMS_OUTPUT.PUT_LINE('BEGIN'); 
      DBMS_OUTPUT.PUT_LINE('sql_txt := q''['); 
      WHILE NVL(LENGTH(:sql_text), 0) > 0 
      LOOP 
        l_pos := INSTR(:sql_text, CHR(10)); 
        IF l_pos > 0 THEN 
          DBMS_OUTPUT.PUT_LINE(SUBSTR(:sql_text, 1, l_pos - 1)); 
          :sql_text := SUBSTR(:sql_text, l_pos + 1); 
        ELSE 
          DBMS_OUTPUT.PUT_LINE(:sql_text); 
          :sql_text := NULL; 
        END IF; 
      END LOOP; 
      DBMS_OUTPUT.PUT_LINE(']'';'); 
      DBMS_OUTPUT.PUT_LINE('h := SYS.SQLPROF_ATTR('); 
      DBMS_OUTPUT.PUT_LINE('q''[BEGIN_OUTLINE_DATA]'','); 
      FOR i IN (SELECT /*+ opt_param('parallel_execution_enabled', 'false') */ 
                       SUBSTR(EXTRACTVALUE(VALUE(d), '/hint'), 1, 4000) hint 
                  FROM TABLE(XMLSEQUENCE(EXTRACT(XMLTYPE(:other_xml), '/*/outline_data/hint'))) d) 
      LOOP 
        l_hint := i.hint; 
        WHILE NVL(LENGTH(l_hint), 0) > 0 
        LOOP 
          IF LENGTH(l_hint) <= 500 THEN 
            DBMS_OUTPUT.PUT_LINE('q''['||l_hint||']'','); 
            l_hint := NULL; 
          ELSE 
            l_pos := INSTR(SUBSTR(l_hint, 1, 500), ' ', -1); 
            DBMS_OUTPUT.PUT_LINE('q''['||SUBSTR(l_hint, 1, l_pos)||']'','); 
            l_hint := ' '||SUBSTR(l_hint, l_pos); 
          END IF; 
        END LOOP; 
      END LOOP; 
      DBMS_OUTPUT.PUT_LINE('q''[END_OUTLINE_DATA]'');'); 
      DBMS_OUTPUT.PUT_LINE(':signature := DBMS_SQLTUNE.SQLTEXT_TO_SIGNATURE(sql_txt);'); 
      DBMS_OUTPUT.PUT_LINE('DBMS_SQLTUNE.IMPORT_SQL_PROFILE ('); 
      DBMS_OUTPUT.PUT_LINE('sql_text => sql_txt,'); 
      DBMS_OUTPUT.PUT_LINE('profile => h,'); 
      DBMS_OUTPUT.PUT_LINE('name => ''coe_&&sql_id._&&plan_hash_value.'','); 
      DBMS_OUTPUT.PUT_LINE('description => ''coe &&sql_id. &&plan_hash_value. ''||:signature||'''','); 
      DBMS_OUTPUT.PUT_LINE('category => ''DEFAULT'','); 
      DBMS_OUTPUT.PUT_LINE('validate => TRUE,'); 
      DBMS_OUTPUT.PUT_LINE('replace => TRUE,'); 
      DBMS_OUTPUT.PUT_LINE('force_match => FALSE /* TRUE:FORCE (match even when different literals in SQL). FALSE:EXACT (similar to CURSOR_SHARING) */ );'); 
      DBMS_OUTPUT.PUT_LINE('END;'); 
      DBMS_OUTPUT.PUT_LINE('/'); 
      DBMS_OUTPUT.PUT_LINE('WHENEVER SQLERROR CONTINUE'); 
      DBMS_OUTPUT.PUT_LINE('SET ECHO OFF;'); 
      DBMS_OUTPUT.PUT_LINE('PRINT signature'); 
      DBMS_OUTPUT.PUT_LINE('PRO'); 
      DBMS_OUTPUT.PUT_LINE('PRO ... manual custom SQL Profile has been created'); 
      DBMS_OUTPUT.PUT_LINE('PRO'); 
      DBMS_OUTPUT.PUT_LINE('SET TERM ON ECHO OFF LIN 80 TRIMS OFF NUMF "";'); 
      DBMS_OUTPUT.PUT_LINE('SPO OFF;'); 
      DBMS_OUTPUT.PUT_LINE('PRO'); 
      DBMS_OUTPUT.PUT_LINE('PRO COE_XFR_SQL_PROFILE_&&sql_id._&&plan_hash_value. completed'); 
    END; 
    / 
    SPO OFF; 
    SET DEF ON TERM ON ECHO OFF FEED 6 VER ON HEA ON LIN 80 PAGES 14 LONG 80 LONGC 80 TRIMS OFF TI OFF TIMI OFF SERVEROUT OFF NUMF "" SQLP SQL>; 
    SET SERVEROUT OFF; 
    PRO 
    PRO Execute coe_xfr_sql_profile_&&sql_id._&&plan_hash_value..sql 
    PRO on TARGET system in order to create a custom SQL Profile 
    PRO with plan &&plan_hash_value linked to adjusted sql_text. 
    PRO 
    UNDEFINE 1 2 sql_id plan_hash_value 
    CL COL 
    PRO 
    PRO COE_XFR_SQL_PROFILE completed.

coe_xfr_sql_profile.sql

发表评论取消回复

还没有评论，来说两句吧...

相关阅读