[Dos] 使用Dos发送email

骑猪看日落 2022-08-08 05:08 175阅读 0赞

使用方法:保存成p-mailsend.cmd或::p-mailsend.bat，然后在dos下执行:

p-mailsend \[/hu\] \[/ht\] /u 用户@地址 \[/p 密码\] /t 收件人 /s 主题 \[/c 内容\] \[/ch\] \[/a 附件\]

::p-mailsend.cmd  
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::  
:: p-mailsend\_v4.0                                                               ::  
::                                                                                      ::  
::           Code by  : vkill                                                       ::  
::           Thanks   : bjsh,est,lxmxm...                                      ::  
::           出    处 : [http://www.vkill.net][http_www.vkill.net][http://bbs.cn-dos.net][http_bbs.cn-dos.net]     ::  
::           功    能 : 命令行邮件发送程序(群发/多附件/匿名)                ::  
::           原    理 : telnet收发邮件的原理                                    ::  
::           最后更新 : 2007-11-12                                             ::  
::           程序依赖文件:nc.exe;rar.exe;base64.exe                      ::  
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

@echo off&endlocal&setlocal ENABLEDELAYEDEXPANSION  
set "t\_=test.conf"  
::这里是匿名发信的详细设置  
set "匿名="QQ邮箱管理员匿名测试" ^<10000@qq.com^>"

call :del\_  
set "oneself=%~f0"  
if "%1"=="" (  
echo 请在命令行下执行 %oneself% /? 查看详细命令行帮助  
ping -n 5 127.1 >nul 2>nul   
goto :eof  
          )  
if "%1"=="/?" goto help  
if "%1"=="-?" goto help  
for %%? in (/h,-h,--h) do (if "%~1"=="%%?" goto help)  
echo.  
echo p-mailsend\_v4.0  by:vkill  
echo \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_

set/p=依赖文件完整性检查...<nul  
set "tools\_name=nc.exe;rar.exe;base64.exe"  
for %%? in (%tools\_name%) do (  
if \*%%~$PATH:?==\* if not exist %%? (  
 echo no,缺失文件%%? &goto :sleep\_  
                                   )  
                            )  
set/p=ok<nul&echo.

set/p=分析参数是否正确...<nul  
set n=0  
if not "%1"=="" (  
:loop\_ap  
set/a n+=1  
if "%1"=="/hu" (set "hu=on" &shift)  
if "%1"=="/ht" (set "ht=on" &shift)  
if "%1"=="/ch" (set "ch=on" &shift)  
if "%1"=="/u" ((for /f "tokens=1-2 delims=@" %%a in ('echo %~2') do (set "user=%%a"& set "server=%%b")) &shift&shift)  
if "%1"=="/p" (set "pass=%~2" &shift&shift)  
if "%1"=="/t" (set "to=%~2" &shift&shift)  
if "%1"=="/s" (set "subject=%~2" &shift&shift)  
if "%1"=="/c" (set "content=%~2" &shift&shift)  
if "%1"=="/a" (set "accessories=%~2" &shift&shift)  
if not "%1"=="" (echo %~1|findstr "^/" >nul 2>nul ||(echo no,参数"%~1"错误&goto :sleep\_))  
if !n!==10 (echo no,参数"%~1"错误&goto :sleep\_)  
if not "%1"=="" (goto loop\_ap)  
              )  
set/p=ok<nul&echo.

set/p=分析必须参数是否缺失...<nul  
for %%? in (user server to subject) do (if not defined %%? (echo no&goto :sleep\_))  
set/p=ok<nul&echo.  
if not defined pass (  
:inputpass  
for /f "tokens=1 delims=:" %%? in ('findstr /N "=Hiddenpass.cmd\_s=" "%oneself%"') do (more +%%? %oneself%>"%temp%/a")  
for /f "tokens=1 delims=:" %%? in ('findstr /N "=Hiddenpass.cmd\_e=" "%oneself%"') do (set/a "a=%%?-1" & more +!a! %oneself%>"%temp%/b")  
findstr /V /B /E /G:"%temp%/b" "%temp%/a">"%temp%/pass.cmd"  
start /wait cmd /k ""%temp%/pass.cmd" "!user!@!server!""  
set/p password=<%temp%/pass  
set "pass=!password:~9!"  
if not defined pass goto inputpass  
del /f/q "%temp%/pass" >nul 2>nul  
del /f/q "%temp%/pass.cmd" >nul 2>nul  
del /f/q "%temp%/a" >nul 2>nul  
del /f/q "%temp%/b" >nul 2>nul  
                  )

set/p=验证支持这个地址的邮箱发信否...<nul  
for /f "tokens=3-6 delims=," %%a in ('findstr "^::,%server%," "%oneself%"') do (  
set "smtp=%%a"&set "port=%%b"&set "认证方式=%%c"&set "max\_z=%%d"  
                                                                              )  
if not defined smtp (echo no&goto :sleep\_)  
set/p=ok<nul&echo.

set/p=验证网络通否...<nul  
for /f "tokens=2 delims=\[\]" %%? in ('ping -n 1 %smtp% ^|findstr /i "^ping.\*\[.\*\]"') do (set "ip=%%?")  
if not defined ip (echo no&goto :sleep\_)  
set/p=ok<nul&echo.

set/p=验证telnet %smtp% %port%通否...<nul  
>"%temp%/l%t\_%" echo quit  
nc -d -nvv %ip% %port% < "%temp%/l%t\_%" >"%temp%/p-mailsend.log"  
findstr . "%temp%/p-mailsend.log">nul 2>nul||(echo no&goto :sleep\_)  
set/p=ok<nul&echo.

set/p=验证登陆成功否...<nul  
if "%认证方式%"=="1" call :认证方式1  
copy "%temp%/%t\_%" "%temp%/l%t\_%">nul 2>nul  
>>"%temp%/l%t\_%" echo quit  
nc -d -nvv %ip% %port% < "%temp%/l%t\_%" >"%temp%/p-mailsend.log"  
set n=0  
for /f "tokens=1,2\* delims=:" %%a in ('findstr /N . "%temp%/p-mailsend.log"') do (set "n=%%a"&set "x%%a=%%b")  
set/a n-=1  
echo "!x%n%!"|findstr "235 " >nul 2>nul ||(echo no,错误"!x%n%!"&goto :sleep\_)  
set/p=ok<nul&echo.

::继续写nc配置文件  
>>"%temp%/%t\_%" echo mail from: ^<%user%@%server%^>  
if exist "%to%" (  
for /f "tokens=\*" %%? in ('findstr "^\[0-9a-zA-Z-\_.\]@" "!to!"') do (set "lto=%%?,!lto!")  
              )  
if defined lto (set "to=!lto!")  
for %%? in (!to!) do (>>"%temp%/%t\_%" echo rcpt to: ^<%%?^>)  
>>"%temp%/%t\_%" echo data  
if not defined hu (>>"%temp%/%t\_%" echo From: %user%@%server%) else (>>"%temp%/%t\_%" echo From: %匿名%)  
if not defined ht (>>"%temp%/%t\_%" echo To: %to%)  
>>"%temp%/%t\_%" echo Subject: %subject%  
>>"%temp%/%t\_%" echo X-mailer: p-mailsend\_v4.0 \[cn\]  
>>"%temp%/%t\_%" echo Mime-Version: 1.0  
>>"%temp%/%t\_%" echo Content-Type: multipart/mixed;  
>>"%temp%/%t\_%" echo         boundary="=====vkill====="  
>>"%temp%/%t\_%" echo.  
>>"%temp%/%t\_%" echo --=====vkill=====  
if defined content call :htmlortxt !content!  
>>"%temp%/%t\_%" echo         charset="gb2312"  
>>"%temp%/%t\_%" echo Content-Transfer-Encoding: 7bit  
>>"%temp%/%t\_%" echo.  
if defined content (dir !content! >nul 2>nul &&(type "!content!">>"%temp%/%t\_%" &>>"%temp%/%t\_%" echo.) ||(>>"%temp%/%t\_%" echo !content!)) else (>>"%temp%/%t\_%" echo :^))

set z=0  
if defined accessories set/p=压缩编码附件中...<nul  
echo "%accessories%" |findstr ")" >nul 2>nul && (echo no,附件路径或文件名中不能包含^)&goto :sleep\_)  
if defined accessories (  
for /f "tokens=1,2,3,4,5,6 delims=→" %%a in ('echo %accessories%') do (  
    call :压缩编码附件 "%%~a"  
    call :压缩编码附件 "%%~b"  
    call :压缩编码附件 "%%~c"  
    call :压缩编码附件 "%%~d"       
    call :压缩编码附件 "%%~e"  
    call :压缩编码附件 "%%~f"                                 )  
                      )  
if defined xx (echo no,压缩或编码附件错误&goto :sleep\_)  
if not !z! lss %max\_z% (echo 附件过大,%server%邮箱最大支持附件大小为%max\_z%K&goto :sleep\_)  
if defined accessories (set/p=ok<nul&echo.)  
>>"%temp%/%t\_%" echo --=====vkill=====--  
>>"%temp%/%t\_%" echo .  
>>"%temp%/%t\_%" echo quit

::发信  
set/p=发信中...<nul  
nc -d -nvv %ip% %port% < ""%temp%/%t\_%"" >"%temp%/p-mailsend.log"  
for /f "tokens=\*" %%? in ("%temp%/p-mailsend.log") do (  
if defined vk1 if not defined vk2 (set vk2=0&set "发信错误=%%?"&echo "%%?"|findstr "250 " >nul 2>nul ||(set vk3=0))  
echo "%%?"|findstr "354 " >nul 2>nul &&(set vk1=0)  
                                           )  
if defined vk3 (echo no,错误"!发信错误!"&goto :sleep\_)  
set/p=ok<nul&echo.

call :del\_  
echo \_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_\_  
echo 信件发送完成,2秒后退出  
ping -n 2 127.1 >nul 2>nul  
goto :eof

::all call::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

:help  
echo.  
echo p-mailsend\_v4.0  2007.11  by:vkill  Thanks to bjsh,est,lxmxm...  
echo Copyright (C) 2006-2008 [http://www.vkill.net][http_www.vkill.net] [http://bbs.cn-dos.net][http_bbs.cn-dos.net]  
echo 当前支持的邮箱有:21cn.com,sina.com,163.com,126.com,sohu.com,yahoo.com.cn,qq.com  
echo 程序依赖文件:nc.exe;rar.exe;base64.exe  
echo 如依赖文件不全请手动到[http://www.vkill.net/tools.html][http_www.vkill.net_tools.html]上下载到windows目录  
echo.  
echo Usage:  
echo p-mailsend \[/hu\] \[/ht\] /u 用户@地址 \[/p 密码\] /t 收件人 /s 主题 \[/c 内容\] \[/ch\] \[/a 附件\]  
echo.  
echo /hu   匿名发信  
echo /ht   隐藏多方发送时别的收件人  
echo /u \*  用户名@地址 例:/u 122755990@qq.com  
echo /p    密码  
echo /t \*  收件人:(收件人/写好收件人列表的文本文件路径)  
echo              (多收件人用,隔开;用""引住) 例:/t "abc@163.com,123@56.com"  
echo              (收件人列表的文本文件格式如下:)  
echo               a@163.com     
echo               b@163.com   
echo               c@163.com            
echo /s \*  主题  
echo /c    内容:(文字/写好内容的文本文件路径)  
echo /ch   信件内容html格式开关,表示发送的内容为html格式    
echo /a    附件:(绝对/相对路径,多附件用→隔开用""引住) 例:/a "c:/a b.cmd→1234.txt"  
goto :eof

:认证方式1  
>>"%temp%/%t\_%" echo helo vkill  
>>"%temp%/%t\_%" echo auth login  
for %%? in (%user%;%pass%) do (  
set/p=%%?^<nul|base64>"l!t\_!"  
set/p v=<"l!t\_!"  
>>"%temp%/%t\_%" echo !v!  
del /f/q "l!t\_!"  
                            )  
goto :eof

:del\_  
del /f/q "%temp%/%t\_%">nul 2>nul  
del /f/q "%temp%/l%t\_%">nul 2>nul  
del /f/q "%temp%/p-mailsend.log">nul 2>nul  
goto :eof

:htmlortxt  
if "%ch%"=="on" (>>"%temp%/%t\_%" echo Content-Type: text/html;) else (>>"%temp%/%t\_%" echo Content-Type: text/plain;)  
goto :eof

:压缩编码附件  
if "%~1"=="" exit/b  
if "%~x1"==".rar" (copy "%~1" "%temp%/%~n1\_.rar" >nul 2>nul) else (  
dir %~1 >nul 2>nul &&(rar.exe -r a "%temp%/%~n1\_.rar" "%~1" >nul 2>nul)||(rar.exe a "%temp%/%~n1\_.rar" "%~1" >nul 2>nul)  
                                                         )  
if not exist "%temp%/%~n1\_.rar" (set xx=vkill&exit/b)  
for %%? in ("%temp%/%~n1\_.rar") do (set/a z=z+%%~z?)  
>>"%temp%/%t\_%" echo --=====vkill=====  
>>"%temp%/%t\_%" echo Content-Type: application/octet-stream;  
>>"%temp%/%t\_%" echo         name="%~n1\_.rar"  
>>"%temp%/%t\_%" echo Content-Transfer-Encoding: base64  
>>"%temp%/%t\_%" echo Content-Disposition: attachment;  
>>"%temp%/%t\_%" echo         filename="%~n1\_.rar"  
>>"%temp%/%t\_%" echo.  
base64.exe -i "%temp%/%~n1\_.rar">>"%temp%/%t\_%"  
>>"%temp%/%t\_%" echo.  
del /f/q "%temp%/%~n1\_.rar" >nul 2>nul  
goto :eof

:sleep\_  
call :del\_  
ping -n 2 127.1 >nul 2>nul  
goto :eof

::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

=Hiddenpass.cmd\_s=  
@echo off  
chcp 437>nul&graftabl 936>nul  
echo hP1X500P\[PZBBBfh\#b\#\#fXf-V@\`$fPf\]f3/f1/5++u5x>in.com  
echo (注:输入密码时不明文显示)  
set  /p password=请输入mail:%~1的密码:<nul  
for /f "tokens=\*" %%i in ('in.com') do set password=%%i  
del in.com  
echo.  
>%temp%/pass set password  
exit  
=Hiddenpass.cmd\_e=

:::::::::::::::::::::当前支持的地址::::::::::::::::::::::  
::,邮箱地址,smtp地址,telnet smtp端口,认证方式,最大附件大小(k)  
::,21cn.com,smtp.21cn.com,25,1,15000000  
::,sina.com,smtp.sina.com.cn,25,1,15000000  
::,163.com,smtp.163.com,25,1,20000000  
::,126.com,smtp.126.com,25,1,20000000  
::,sohu.com,smtp.sohu.com,25,1,10000000  
::,yahoo.com.cn,smtp.mail.yahoo.com,25,1,15000000  
::,yahoo.com,smtp.mail.yahoo.com,25,1,15000000  
::,qq.com,smtp.qq.com,25,1,5000000  
::

[http_www.vkill.net]: http://www.vkill.net/
[http_bbs.cn-dos.net]: http://bbs.cn-dos.net/
[http_www.vkill.net_tools.html]: http://www.vkill.net/tools.html