Centos 6.5下搭建samba-glusterfs

左手的ㄟ右手 2022-08-06 12:04 175阅读 0赞

# 环境说明 #

硬件环境：

vm \*2

软件环境：

Centos 6.5

glusterfs-3.6.0.29-2.el6.x86\_64

samba-glusterfs-3.6.23-12.el6.x86\_64

samba-3.6.23-12.el6.x86\_64

# 安装配置 #

1.更新epel源

#wget http://mirrors.ustc.edu.cn/fedora/epel/6/x86_64/epel-release-6-8.noarch.rpm
    #rpm -ivh epel-release-6-8.noarch.rpm

2.安装samba-glusterfs，安装该包后，系统会自动安装好samba以及glusterfs

#yum -y install samba-glusterfs

## Glusterfs配置 ##

1.添加glusterfs服务器

#gluster peer probe 10.10.200.178

查看glusterfs cluster状态

[root@glusterfs-node-1 samba]# gluster peer status
    Number of Peers: 1
    
    Hostname: 10.10.200.178
    Uuid: 1d1cfe87-6416-468b-b268-cf266596bce9
    State: Peer in Cluster (Connected)

2.创建volume

[root@glusterfs-node-2 ~]# gluster volume create samba-vol1 replica 2 10.10.200.178:/buck1 10.10.200.177:/buck1

启动该volume

#gluster volume start samba-vol1

查看volume状态

[root@glusterfs-node-2 ~]# gluster volume status
    Status of volume: samba-vol1
    Gluster process                                         Port    Online  Pid
    ------------------------------------------------------------------------------
    Brick 10.10.200.178:/buck1                              49152   Y       6174
    Brick 10.10.200.177:/buck1                              49152   Y       2221
    NFS Server on localhost                                 2049    Y       13690
    Self-heal Daemon on localhost                           N/A     Y       13697
    NFS Server on 10.10.200.177                             N/A     N       N/A
    Self-heal Daemon on 10.10.200.177                       N/A     Y       4146
     
    Task Status of Volume samba-vol1
    ------------------------------------------------------------------------------
    There are no active volume tasks

##    Samba配置 ##

1.配置添加\[data\]字段到smb.conf文件中，并通过smbpasswd设置root用户的密码

[data]
        comment = For samba export of volume  test
        vfs objects = glusterfs
        glusterfs:volfile_server = localhost
        glusterfs:volume = samba-vol1
        path = /
        workgroup = root
        netbios name = root
        browseable = yes
        writeable = yes

2.测试smb.conf配置文件

[root@glusterfs-node-1 samba]# testparm 
    Load smb config files from /etc/samba/smb.conf
    rlimit_max: increasing rlimit_max (1024) to minimum Windows limit (16384)
    Processing section "[data]"
    Global parameter workgroup found in service section!
    Global parameter netbios name found in service section!
    Processing section "[homes]"
    Processing section "[printers]"
    Loaded services file OK.
    Server role: ROLE_STANDALONE
    Press enter to see a dump of your service definitions
    
    [global]
            workgroup = MYGROUP
            server string = Samba Server Version %v
            password server = 127.0.0.1
            log file = /var/log/samba/log.%m
            max log size = 50
            idmap config * : backend = tdb
            cups options = raw
    
    [data]
            comment = For samba export of volume  test
            path = /
            read only = No
            vfs objects = glusterfs
            glusterfs:volume = samba-vol1
            glusterfs:volfile_server = localhost
    
    [homes]
            comment = Home Directories
            read only = No
            browseable = No
    
    [printers]
            comment = All Printers
            path = /var/spool/samba
            printable = Yes
            print ok = Yes
            browseable = No

3.启动smb

#/etc/init.d/smb start

##    Samba 客户端配置 ##

[root@samba-180 /]# mount -t cifs //10.10.200.177/data /mnt -o username=root,password=hgctech
    [root@samba-180 /]# df
    Filesystem           1K-blocks    Used Available Use% Mounted on
    /dev/sda3              7219704 2370056   4482904  35% /
    tmpfs                   961216       0    961216   0% /dev/shm
    /dev/sda1              1032088   62612    917048   7% /boot
    //10.10.200.177/data 524032000   32980 523999020   1% /mnt

ok~通过上述配置，完成了samba通过glusterfs-api调用glusterfs的全部配置过程！