S3C2440 OpenJtag

亦凉 2022-06-09 14:06 179阅读 0赞

C:\Users\Administrator\Desktop>oflash.exe leds.bin
    
    +---------------------------------------------------------+
    |   Flash Programmer v1.5.4 for OpenJTAG of www.100ask.net  |
    |   OpenJTAG is a USB to JTAG & RS232 tool based FT2232   |
    |   This programmer supports both of S3C24X0 & S3C6410    |
    |   Author: Email/MSN(thisway.diy@163.com), QQ(17653039)  |
    +---------------------------------------------------------+
    Usage:
    1. oflash, run with cfg.txt or prompt
    2. oflash [file], write [file] to flash with prompt
    3. oflash [-f config_file]
    4. oflash [jtag_type] [cpu_type] [flash_type] [read_or_write] [offset] [file]
    Select the JTAG type:
    0. OpenJTAG
    1. Dongle JTAG(parallel port) //并口
    2. Wiggler JTAG(parallel port) //并口
    Enter the number: 0
    Select the CPU:
    0. S3C2410
    1. S3C2440
    2. S3C6410
    Enter the number: 1
    
    device: 4 "2232C"
    deviceID: 0x14575118
    SerialNumber: FTDAx43UA
    Description: USB<=>JTAG&RS232 AS3C2440 detected, cpuID = 0x0032409d
    
    [Main Menu]
     0:Nand Flash prog     1:Nor Flash prog   2:Memory Rd/Wr     3:Exit
    Select the function to test:0
    
    [NAND Flash JTAG Programmer]
    nand_maf_id = 0xec, nand_dev_id = 0xda
    Scan nand flash:
    Device 0: NAND 256MiB 3,3V 8-bit, sector size 128 KiB
    Total size: 256 MiB
     0:Nand Flash Program      1:Nand Flash Print BlkPage   2:Exit
    Select the function to test :0
    
    [NAND Flash Writing Program]
    
    Source size: 0xa8
    
    Available target block number: 0~2047
    Input target block number:0
    target start block number     =0
    target size        (0x20000*1) =0x20000
    STATUS:
    Ep
    
    C:\Users\Administrator\Desktop>oflash.exe 0 1 0 0 0 leds.bin //直接输入