在Linux环境下部署confluent platform

Myth丶恋晨 2022-06-03 04:50 443阅读 0赞

#### **1. confluent platform的简单介绍：** ####

confluent platform是一个可靠、高性能的流平台，提供组织和管理来自不同数据源数据的功能。（这个说法太正式，反正我是简单粗暴地把它当成kafka和一些扩展kafka功能的一套组件~）

#### **2. confluent platform的部署流程：** ####

废话不多说，直接开搞~

##### **(1) 安装JDK（建议安装1.8的）** #####

这个很简单，就跳过吧，不会的请自行度娘~

##### **(2) 配置主机名和ip的映射（zookeeper的主机之间是使用主机名相互通信的）** #####

vim /etc/hosts
    192.168.20.240     host240
    192.168.20.239     host239
    192.168.20.238     host238

(ps: zookeeper至少需要三台机子，然后改hosts需要root权限~)

##### **(3) 安装zookeeper** #####

虽然confluent platform自带一个，但是还是推荐自己装一个更高版本的~

###### **a. 下载** ######

[zookeeper][]

###### **b. 解压后进入目录** ######

tar -zxf zookeeper-3.4.11.tar.gz
    cd zookeeper-3.4.11

###### **c. 添加配置文件** ######

复制一份conf/zoo\_sample.cfg，命名为zoo.cfg

cp conf/zoo_sample.cfg conf/zoo.cfg

我的配置（修改的会有中文说明）如下：

# The number of milliseconds of each tick
    tickTime=2000
    # The number of ticks that the initial 
    # synchronization phase can take
    initLimit=10
    # The number of ticks that can pass between 
    # sending a request and getting an acknowledgement
    syncLimit=5
    # the directory where the snapshot is stored.
    # do not use /tmp for storage, /tmp here is just 
    # example sakes.
    #zookeeper数据目录
    dataDir=/data/zookeeper
    # the port at which the clients will connect
    clientPort=2181
    # the maximum number of client connections.
    # increase this if you need to handle more clients
    #maxClientCnxns=60
    #
    # Be sure to read the maintenance section of the 
    # administrator guide before turning on autopurge.
    #
    # http://zookeeper.apache.org/doc/current/zookeeperAdmin.html#sc_maintenance
    #
    # The number of snapshots to retain in dataDir
    #autopurge.snapRetainCount=3
    # Purge task interval in hours
    # Set to "0" to disable auto purge feature
    #autopurge.purgeInterval=1
    #根据机子数目做相应的配置,server.x中的x是下面myid需要的
    server.240=host240:2888:3888
    server.239=host239:2888:3888
    server.238=host238:2888:3888

(ps:这个配置每台机子都一样~)

###### **d. 添加myid文件** ######

在上一步配置的zookeeper数据目录下新建文件myid，加入上一步对应配置的x（比如host240对应配置的是240）

cat /data/zookeeper/myid
    240

###### **e. 启动zookeeper** ######

分别在三台主机上启动

bin/zkServer.sh start

##### **(4) confluent platform安装** #####

###### **a. 下载** ######

[https://www.confluent.io/download/][https_www.confluent.io_download]

(ps: 选择下载开源版本，邮件可以乱填，只要能通过邮件的正则校验即可，不用登陆邮件确认~)

###### **b. 解压后进入目录** ######

tar -zxf confluent-oss-4.0.0-2.11.tar.gz
    cd confluent-oss-4.0.0

###### **c. 修改配置文件** ######

至少需要配置etc/kafka目录下的server.properties，我的配置（修改的会有中文说明）如下:

# Licensed to the Apache Software Foundation (ASF) under one or more
    # contributor license agreements.  See the NOTICE file distributed with
    # this work for additional information regarding copyright ownership.
    # The ASF licenses this file to You under the Apache License, Version 2.0
    # (the "License"); you may not use this file except in compliance with
    # the License.  You may obtain a copy of the License at
    #
    #    http://www.apache.org/licenses/LICENSE-2.0
    #
    # Unless required by applicable law or agreed to in writing, software
    # distributed under the License is distributed on an "AS IS" BASIS,
    # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    # See the License for the specific language governing permissions and
    # limitations under the License.
    
    # see kafka.server.KafkaConfig for additional details and defaults
    
    ############################# Server Basics #############################
    
    # The id of the broker. This must be set to a unique integer for each broker. # kafka broker id，必须唯一 broker.id=240 # Switch to enable topic deletion or not, default value is false # 这个默认是false，不过建议打开方便删除~ delete.topic.enable=true ############################# Socket Server Settings ############################# # The address the socket server listens on. It will get the value returned from # java.net.InetAddress.getCanonicalHostName() if not configured. # FORMAT: # listeners = listener_name://host_name:port # EXAMPLE: # listeners = PLAINTEXT://your.host.name:9092 # kafka 监听端口，默认是9092 listeners=PLAINTEXT://:9092 # Hostname and port the broker will advertise to producers and consumers. If not set, # it uses the value for "listeners" if configured. Otherwise, it will use the value # returned from java.net.InetAddress.getCanonicalHostName(). #advertised.listeners=PLAINTEXT://your.host.name:9092 # Maps listener names to security protocols, the default is for them to be the same. See the config documentation for more details #listener.security.protocol.map=PLAINTEXT:PLAINTEXT,SSL:SSL,SASL_PLAINTEXT:SASL_PLAINTEXT,SASL_SSL:SASL_SSL # The number of threads that the server uses for receiving requests from the network and sending responses to the network num.network.threads=3 # The number of threads that the server uses for processing requests, which may include disk I/O num.io.threads=8 # The send buffer (SO_SNDBUF) used by the socket server socket.send.buffer.bytes=102400 # The receive buffer (SO_RCVBUF) used by the socket server socket.receive.buffer.bytes=102400 # The maximum size of a request that the socket server will accept (protection against OOM) socket.request.max.bytes=104857600 ############################# Log Basics ############################# # A comma seperated list of directories under which to store log files # kafka 日志保存路径 log.dirs=/data/gameserver/bigdata/confluent # The default number of log partitions per topic. More partitions allow greater # parallelism for consumption, but this will also result in more files across # the brokers. # 默认分区数(创建topic不指定分区数目时) num.partitions=32 # The number of threads per data directory to be used for log recovery at startup and flushing at shutdown. # This value is recommended to be increased for installations with data dirs located in RAID array. num.recovery.threads.per.data.dir=1 ############################# Internal Topic Settings ############################# # The replication factor for the group metadata internal topics "__consumer_offsets" and "__transaction_state" # For anything other than development testing, a value greater than 1 is recommended for to ensure availability such as 3. offsets.topic.replication.factor=1 transaction.state.log.replication.factor=1 transaction.state.log.min.isr=1 ############################# Log Flush Policy ############################# # Messages are immediately written to the filesystem but by default we only fsync() to sync # the OS cache lazily. The following configurations control the flush of data to disk. # There are a few important trade-offs here: # 1. Durability: Unflushed data may be lost if you are not using replication. # 2. Latency: Very large flush intervals may lead to latency spikes when the flush does occur as there will be a lot of data to flush. # 3. Throughput: The flush is generally the most expensive operation, and a small flush interval may lead to exceessive seeks. # The settings below allow one to configure the flush policy to flush data after a period of time or # every N messages (or both). This can be done globally and overridden on a per-topic basis. # The number of messages to accept before forcing a flush of data to disk #log.flush.interval.messages=10000 # The maximum amount of time a message can sit in a log before we force a flush #log.flush.interval.ms=1000 ############################# Log Retention Policy ############################# # The following configurations control the disposal of log segments. The policy can # be set to delete segments after a period of time, or after a given size has accumulated. # A segment will be deleted whenever *either* of these criteria are met. Deletion always happens # from the end of the log. # The minimum age of a log file to be eligible for deletion due to age # 日志保存时长 log.retention.hours=48 # A size-based retention policy for logs. Segments are pruned from the log unless the remaining # segments drop below log.retention.bytes. Functions independently of log.retention.hours. #log.retention.bytes=1073741824 # The maximum size of a log segment file. When this size is reached a new log segment will be created. log.segment.bytes=1073741824 # The interval at which log segments are checked to see if they can be deleted according # to the retention policies log.retention.check.interval.ms=300000 ############################# Zookeeper ############################# # Zookeeper connection string (see zookeeper docs for details). # This is a comma separated host:port pairs, each corresponding to a zk # server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002". # You can also append an optional chroot string to the urls to specify the # root directory for all kafka znodes. # zookeeper地址（没有/confluent的话会保存在zookeeper的根目录~） zookeeper.connect=host240:2181,host239:2181,host238:2181/confluent # Timeout in ms for connecting to zookeeper # zookeeper超时时间 zookeeper.connection.timeout.ms=6000 ##################### Confluent Metrics Reporter ####################### # Confluent Control Center and Confluent Auto Data Balancer integration # # Uncomment the following lines to publish monitoring data for # Confluent Control Center and Confluent Auto Data Balancer # If you are using a dedicated metrics cluster, also adjust the settings # to point to your metrics kakfa cluster. #metric.reporters=io.confluent.metrics.reporter.ConfluentMetricsReporter #confluent.metrics.reporter.bootstrap.servers=localhost:9092 # # Uncomment the following line if the metrics cluster has a single broker #confluent.metrics.reporter.topic.replicas=1 ##################### Confluent Proactive Support ###################### # If set to true, and confluent-support-metrics package is installed # then the feature to collect and report support metrics # ("Metrics") is enabled. If set to false, the feature is disabled. confluent.support.metrics.enable=false ############################# Group Coordinator Settings ############################# # The following configuration specifies the time, in milliseconds, that the GroupCoordinator will delay the initial consumer rebalance. # The rebalance will be further delayed by the value of group.initial.rebalance.delay.ms as new members join the group, up to a maximum of max.poll.interval.ms. # The default value for this is 3 seconds. # We override this to 0 here as it makes for a better out-of-the-box experience for development and testing. # However, in production environments the default value of 3 seconds is more suitable as this will help to avoid unnecessary, and potentially expensive, rebalances during application startup. group.initial.rebalance.delay.ms=0 # The customer ID under which support metrics will be collected and # reported. # # When the customer ID is set to "anonymous" (the default), then only a # reduced set of metrics is being collected and reported. # # Confluent customers # ------------------- # If you are a Confluent customer, then you should replace the default # value with your actual Confluent customer ID. Doing so will ensure # that additional support metrics will be collected and reported. # confluent.support.customer.id=anonymous

这里只展示kafka的配置，其他组件的配置也都在etc目录下，根据自己的需要选择相应的配置即可~  
(ps：别忘了host239和host238两台机子也需要做相同的配置，除了broker.id之外~)

###### **d. 启动** ######

启动脚本都在bin目录下面，分别在三台机子上启动命令

nohup ./bin/kafka-server-start ./etc/kafka/server.properties &

先通过Java的jps命令查看是否存在SupportedKafka进程，再查看logs/server.log是否有报错信息。  
(ps：其他的组件基本上都是修改配置，然后用上面类似的启动命令启动，就不一一展示了~)

###### **e. 测试** ######

如果启动没问题了，可以试着在一台机子新建topic

bin/kafka-topics --create --zookeeper  host240:2181,host239:2181,host238:2181/confluent --replication-factor 1 --partitions 1 --topic test

然后在其他机子查看是否能看到新建的topic

bin/kafka-topics --list --zookeeper host240:2181,host239:2181,host238:2181/confluent

如果能看到的话基本就算装好了，可以试着往里面写点数据

bin/kafka-console-producer --broker-list host240:9092,host239:9092,host238:9092 --topic test
    This is a message