kubernetes完整搭建过程

刺骨的言语ヽ痛彻心扉 2022-05-31 04:41 208阅读 0赞

# 一环境准备 #

1. 修改所有机器hosts文件

Master和Node节点

修改/etc/hosts文件，加入主机地址

192.168.182.128   Master

192.168.182.129   Node1

2. 关闭防火墙、swap和linux安全配置

systemctl stop firewalld

getenforce

setenforce 0

swapoff -a

3. 安装docker配置国内镜像源

yum -y install docker

修改docker镜像源

cat  /etc/docker/daemon.json

"registry-mirrors": \["http://68e02ab9.m.daocloud.io"\]

启动docker

systemctl enable docker

systemctl start docker

查看docker状态

systemctl status docker

![Image 1][]

4. 修改配置文件并重启docker服务

echo 1 > /proc/sys/net/bridge/bridge-nf-call-iptables

echo 1 > /proc/sys/net/bridge/bridge-nf-call-ip6tables

systemctl  restart  docker

5. 配置k8s安装包的yum仓库地址

vi kubernetes.repo

\[kubernetes\]

name=Kubernetes

baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86\_64

enabled=1

gpgcheck=0

mv kubernetes.repo /etc/yum.repos.d/

6. 安装k8s相关服务

yum -y install kubectl kubelet kubeadm kubernetes-cni

7. 启动kubelet服务

sudo systemctl enable kubelet && sudo systemctl start kubelet

此时kubelet服务状态可能是未启动状态，这里不需要处理

8. 下载k8s集群服务依赖的docker镜像，并标签为google镜像

docker pull warrior/pause-amd64:3.0

docker tag warrior/pause-amd64:3.0 gcr.io/google\_containers/pause-amd64:3.0

docker pull warrior/etcd-amd64:3.0.17

docker tag warrior/etcd-amd64:3.0.17  gcr.io/google\_containers/etcd-amd64:3.0.17

docker pull warrior/kube-apiserver-amd64:v1.6.0

docker tag warrior/kube-apiserver-amd64:v1.6.0 gcr.io/google\_containers/kube-apiserver-amd64:v1.6.0

docker pull warrior/kube-scheduler-amd64:v1.6.0

docker tag warrior/kube-scheduler-amd64:v1.6.0  gcr.io/google\_containers/kube-scheduler-amd64:v1.6.0

docker pull warrior/kube-controller-manager-amd64:v1.6.0

docker tag warrior/kube-controller-manager-amd64:v1.6.0  gcr.io/google\_containers/kube-controller-manager-amd64:v1.6.0

docker pull warrior/kube-proxy-amd64:v1.6.0

docker tag warrior/kube-proxy-amd64:v1.6.0  gcr.io/google\_containers/kube-proxy-amd64:v1.6.0

docker pull gysan/dnsmasq-metrics-amd64:1.0

docker tag gysan/dnsmasq-metrics-amd64:1.0  gcr.io/google\_containers/dnsmasq-metrics-amd64:1.0

docker pull warrior/k8s-dns-kube-dns-amd64:1.14.1

docker tag warrior/k8s-dns-kube-dns-amd64:1.14.1 gcr.io/google\_containers/k8s-dns-kube-dns-amd64:1.14.4

docker pull warrior/k8s-dns-dnsmasq-nanny-amd64:1.14.1

docker tag warrior/k8s-dns-dnsmasq-nanny-amd64:1.14.1  gcr.io/google\_containers/k8s-dns-dnsmasq-nanny-amd64:1.14.4

docker pull warrior/k8s-dns-sidecar-amd64:1.14.1

docker tag warrior/k8s-dns-sidecar-amd64:1.14.1  gcr.io/google\_containers/k8s-dns-sidecar-amd64:1.14.4

docker pull awa305/kube-discovery-amd64:1.0

docker tag awa305/kube-discovery-amd64:1.0 gcr.io/google\_containers/kube-discovery-amd64:1.0

docker pull gysan/exechealthz-amd64:1.2

docker tag gysan/exechealthz-amd64:1.2  gcr.io/google\_containers/exechealthz-amd64:1.2

docker pull registry.cn-hangzhou.aliyuncs.com/google-containers/kubernetes-dashboard-amd64:v1.6.0

docker tag registry.cn-hangzhou.aliyuncs.com/google-containers/kubernetes-dashboard-amd64:v1.6.0 gcr.io/google\_containers/kubernetes-dashboard-amd64:v1.6.0

9. 下载Calico网络相关镜像（不安装calico网络无需下载）

docker pull quay.io/calico/node:v2.6.5

docker pull quay.io/calico/kube-controllers:v1.0.2

docker pull quay.io/calico/cni:v1.11.2

## **二 Master节点安装** ##

1. 初始化k8s集群

在Master节点执行创建命令，初始化时要知道k8s的版本号，要与之前下载的k8s的docker镜像版本一致，否则会从公网下载镜像，没有翻墙的话下载失败会一直卡住

1.1 使用calico网络执行（calico的默认ip为192.168.0.0，可能与本地网络ip环境冲突，这里修改为192.168.111.0）

kubeadm init --kubernetes-version=v1.6.0  --pod-network-cidr=192.168.111.0/24

1.2 使用weave网络执行

kubeadm init --kubernetes-version=v1.6.0

2. 出现success代表安装成功

执行命令：

mkdir -p $HOME/.kube

sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config

sudo chown $(id -u):$(id -g) $HOME/.kube/config

记录下初始化成功后的命令，以后添加Node节点时要使用这个命令

kubeadm join --token 31bfa8.ae4b0c7836c127b1 192.168.x.x:6443（非常重要）

查看服务状态

因为未安装网络 此时kube-dns服务状态为pending

3 安装网络，以下二选一

3.1 安装weave网络

kubectl apply -f [ https://git.io/weave-kube-1.6][https_git.io_weave-kube-1.6]

3.2 安装calico网络

3.2.1安装依赖工具

yum install ebtables ethtool

3.2.2下载calico.yaml文件

wget [ https://docs.projectcalico.org/v2.6/getting-started/kubernetes/installation/hosted/kubeadm/1.6/calico.yaml][https_docs.projectcalico.org_v2.6_getting-started_kubernetes_installation_hosted_kubeadm_1.6_calico.yaml]

3.2.3 修改calico.yaml文件的ip地址（加黑部分）为k8s的Master节点初始化时设置的IP地址

\# Configure the IP Pool from which Pod IPs will be chosen.  
\- name: CALICO\_IPV4POOL\_CIDR  
value: “**192.168.111.0/24**”  
\- name: CALICO\_IPV4POOL\_IPIP  
value: “always”  
\# Disable IPv6 on Kubernetes.  
\- name: FELIX\_IPV6SUPPORT  
value: “false”

3.2.4启动calico镜像

kubectl apply -f  ./calico.yaml

等待约10分钟（此时安装calico相关镜像），查看相关服务状态，此时kub-dns服务状态已经Running，表示网络安装成功

4 安装dashboard管理界面

4.1 下载dashboard模板文件或者自己拷贝一份

wget https://raw.githubusercontent.com/kubernetes/dashboard/master/src/deploy/recommended/kubernetes-dashboard.yaml

4.2 或者直接复制下面的内容保存为kubernetes-dashboard.yaml

\# Licensed under the Apache License, Version 2.0 (the "License");

\# you may not use this file except in compliance with the License.

\# You may obtain a copy of the License at

\#     http://www.apache.org/licenses/LICENSE-2.0

\# Unless required by applicable law or agreed to in writing, software

\# distributed under the License is distributed on an "AS IS" BASIS,

\# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

\# See the License for the specific language governing permissions and

\# limitations under the License.

\# Configuration to deploy release version of the Dashboard UI compatible with

\# Kubernetes 1.6 (RBAC enabled).

\# Example usage: kubectl create -f <this\_file>

apiVersion: v1

kind: ServiceAccount

metadata:

labels:

app: kubernetes-dashboard

namespace: kube-system

\---

apiVersion: rbac.authorization.k8s.io/v1beta1

kind: ClusterRoleBinding

metadata:

labels:

app: kubernetes-dashboard

roleRef:

apiGroup: rbac.authorization.k8s.io

kind: ClusterRole

subjects:

\- kind: ServiceAccount

namespace: kube-system

\---

kind: Deployment

apiVersion: extensions/v1beta1

metadata:

labels:

app: kubernetes-dashboard

namespace: kube-system

spec:

replicas: 1

revisionHistoryLimit: 10

selector:

matchLabels:

app: kubernetes-dashboard

template:

metadata:

labels:

app: kubernetes-dashboard

spec:

containers:

- name: kubernetes-dashboard

image:  registry.cn-hangzhou.aliyuncs.com/google-containers/kubernetes-dashboard-amd64:v1.6.0

imagePullPolicy: Always

ports:

- containerPort: 9090

protocol: TCP

args:

\# Uncomment the following line to manually specify Kubernetes API server Host

\# If not specified, Dashboard will attempt to auto discover the API server and connect

\# to it. Uncomment only if the default does not work.

\# - --apiserver-host=http://my-address:port

livenessProbe:

httpGet:

path: /

port: 9090

initialDelaySeconds: 30

timeoutSeconds: 30

serviceAccountName: kubernetes-dashboard

\# Comment the following tolerations if Dashboard must not be deployed on master

tolerations:

- key: node-role.kubernetes.io/master

effect: NoSchedule

\---

kind: Service

apiVersion: v1

metadata:

labels:

app: kubernetes-dashboard

namespace: kube-system

spec:

type: NodePort

ports:

- port: 80

targetPort: 9090

nodePort: 31000

selector:

app: kubernetes-dashboard

4.3修改kubernetes-dashboard.yaml文件

修改下面加黑字体的部分

spec:

**type: NodePort**

selector:

k8s-app: kubernetes-dashboard

ports:

- port: 80

targetPort: 9090

**nodePort: 31000  \#\#对外端口**

如果type是ClusterPort改为NodePort

修改image地址为可访问地址（默认为Google地址，需要翻墙才能访问）

image: registry.cn-hangzhou.aliyuncs.com/google-containers/kubernetes-dashboard-amd64:v1.6.0

4.4 创建dashboard服务

kubectl create -f kubernetes-dashboard.yaml

等待几分钟后，当kubernetes-dashboard的状态为Running时表示服务启动成功

4.5 访问web页面，https://MaterIp:31000

## **三 Node节点安装** ##

1. Node节点也完成部署步骤一的环境配置

2.在Node节点执行Master节点初始化时记录下的命令

kubeadm join --token ede9af.c8aed8f4efc9571a 192.168.182.132:6443

3.等待几分钟后，在Master节点可以看到新添加的节点信息，此时环境创建完毕

## **四 其他** ##

1 查看k8s相关服务日志

当系统出现异常时可以通过journalctl命令查看一些组件的服务。

在Linux系统上systemd系统来管理kubernetes服务，并且journal系统会接管服务程序的输出日志，可以通过systemctl status <xxx>或journalctl -u <xxx> -f来查看kubernetes服务的日志。

其中kubernetes组件包括：

<table> 
 <tbody> 
 <tr> 
 <td style="background:rgb(240,240,240)"> k8s组件 </td> 
 <td style="background:rgb(240,240,240)"> 涉及日志内容 </td> 
 <td style="background:rgb(240,240,240)"> 备注 </td> 
 </tr> 
 <tr> 
 <td> kube-apiserver </td> 
 <td> &nbsp; </td> 
 <td> &nbsp; </td> 
 </tr> 
 <tr> 
 <td> kube-controller-manager </td> 
 <td> Pod扩容相关或RC相关 </td> 
 <td> &nbsp; </td> 
 </tr> 
 <tr> 
 <td> kube-scheduler </td> 
 <td> Pod扩容相关或RC相关 </td> 
 <td> &nbsp; </td> 
 </tr> 
 <tr> 
 <td> kubelet </td> 
 <td> Pod生命周期相关：创建、停止等 </td> 
 <td> &nbsp; </td> 
 </tr> 
 <tr> 
 <td> etcd </td> 
 <td> &nbsp; </td> 
 <td> &nbsp; </td> 
 </tr> 
 </tbody> 
</table>

例如：**journalctl  -u  -f   kubelet**

2  关于calico网络配置

修改Calico默认ip段  
Calico默认ip段是192.168.0.0/16，如果本地也是192.168.x.x容易引起冲突，所以最好重新定义Calicoip

第一步在kubeadm init  的时候修改ip段。  
例如：kubeadm init –pod-network-cidr=192.168.111.0/24

第二步修改calico.yaml  文件

\# Configure the IP Pool from which Pod IPs will be chosen.  
\- name: CALICO\_IPV4POOL\_CIDR  
value: “192.168.111.0/24”  
\- name: CALICO\_IPV4POOL\_IPIP  
value: “always”  
\# Disable IPv6 on Kubernetes.  
\- name: FELIX\_IPV6SUPPORT  
value: “false”

3.若是单节点部署（即既为master，也为slave）

正常情况Master节点不参与负载，执行以下命令，让master参与负载

kubectl taint nodes --all  node-role.kubernetes.io/master-

[Image 1]: 
[https_git.io_weave-kube-1.6]: https://git.io/weave-kube-1.6
[https_docs.projectcalico.org_v2.6_getting-started_kubernetes_installation_hosted_kubeadm_1.6_calico.yaml]: https://docs.projectcalico.org/v2.6/getting-started/kubernetes/installation/hosted/kubeadm/1.6/calico.yaml