kubernetes学习：6.创建etcd集群

傷城~ 2022-05-26 23:06 164阅读 0赞

# etcd集群 #

--------------------

etcd 是由CoreOS开发，用于可靠地存储集群的配置数据的一种持久性，轻量型的，分布式的键-值数据存储。表示在任何给定时间点处的集群的整体状态。其他组件在注意到存储的变化之后，会变成相应的状态。

作为一个分布式系统，etcd的一致性算法采用：Raft算法。关于etcd所涉及的算法详细介绍在这篇博文中多有涉猎：  
[https://www.jianshu.com/p/5aed73b288f7][https_www.jianshu.com_p_5aed73b288f7]

etcd的官方网站如下：  
[https://coreos.com/etcd/][https_coreos.com_etcd]

etcd集群的搭建必须使用奇数个节点数量，我们这里使用**192.168.99.189**、**192.168.99.185**、**192.168.99.196**三个节点进行部署（都部署在node节点）。

--------------------

## 部署etcd集群 ##

--------------------

### 下载安装etcd ###

在etcd的github地址下载最新版的二进制包：  
[https://github.com/coreos/etcd/releases][https_github.com_coreos_etcd_releases]

[root@wecloud-test-k8s-2 ssl]# wget https://github.com/coreos/etcd/releases/download/v3.2.18/etcd-v3.2.18-linux-amd64.tar.gz
    [root@wecloud-test-k8s-2 ~]# tar xvf etcd-v3.2.18-linux-amd64.tar.gz
    [root@wecloud-test-k8s-2 ~]# mv etcd-v3.2.18-linux-amd64/etcd* /usr/local/bin/

--------------------

### 设置etcd的服务管理文件 ###

编辑/usr/lib/systemd/system/etcd.service服务管理文件：

[Unit]
    Description=Etcd Server
    After=network.target
    After=network-online.target
    Wants=network-online.target
    Documentation=https://github.com/coreos
    
    [Service]
    Type=notify
    WorkingDirectory=/var/lib/etcd/
    EnvironmentFile=-/etc/etcd/etcd.conf
    ExecStart=/usr/local/bin/etcd \
      --name ${ ETCD_NAME} \   --cert-file=/etc/kubernetes/ssl/kubernetes.pem \   --key-file=/etc/kubernetes/ssl/kubernetes-key.pem \   --peer-cert-file=/etc/kubernetes/ssl/kubernetes.pem \   --peer-key-file=/etc/kubernetes/ssl/kubernetes-key.pem \   --trusted-ca-file=/etc/kubernetes/ssl/ca.pem \   --peer-trusted-ca-file=/etc/kubernetes/ssl/ca.pem \   --initial-advertise-peer-urls ${ ETCD_INITIAL_ADVERTISE_PEER_URLS} \   --listen-peer-urls ${ ETCD_LISTEN_PEER_URLS} \   --listen-client-urls ${ ETCD_LISTEN_CLIENT_URLS},http://127.0.0.1:2379 \   --advertise-client-urls ${ ETCD_ADVERTISE_CLIENT_URLS} \   --initial-cluster-token ${ ETCD_INITIAL_CLUSTER_TOKEN} \   --initial-cluster infra1=https://192.168.99.189:2380,infra2=https://192.168.99.185:2380,infra3=https://192.168.99.196:2380 \   --initial-cluster-state new \   --data-dir=${ ETCD_DATA_DIR} Restart=on-failure
    RestartSec=5
    LimitNOFILE=65536
    
    [Install]
    WantedBy=multi-user.target

（1）**–initial-cluster**指定了etcd集群各节点的名称和url地址  
（2）服务启动参数在EnvironmentFile指定的文件（/etc/etcd/etcd.conf）中进行定义。  
（3）启动参数中还指定了各证书的绝对路径。  
（4）指定了工作路径为/var/lib/etcd/，数据路径为/var/lib/etcd/，所以需要提前进行创建：

[root@wecloud-test-k8s-2 ~]# mkdir -p /var/lib/etcd

--------------------

### 设置etcd配置文件 ###

上述启动脚本中指定etcd服务的配置文件路径为/etc/etcd/etcd.conf（首先创建/etc/etcd/目录）：

[root@wecloud-test-k8s-2 ~]# mkdir -p /etc/etcd/

etcd.conf内容如下：

# [member]
    ETCD_NAME=infra1
    ETCD_DATA_DIR="/var/lib/etcd"
    ETCD_LISTEN_PEER_URLS="https://192.168.99.189:2380"
    ETCD_LISTEN_CLIENT_URLS="https://192.168.99.189:2379"
    
    #[cluster]
    ETCD_INITIAL_ADVERTISE_PEER_URLS="https://192.168.99.189:2380"
    ETCD_INITIAL_CLUSTER_TOKEN="etcd-cluster"
    ETCD_ADVERTISE_CLIENT_URLS="https://192.168.99.189:2379"

在其他两个节点上也需要进行相应的配置，name需要修改，并且将上面的IP地址改成相应节点的IP地址即可。

--------------------

### 启动etcd服务 ###

先向systemctl中注册etcd服务，然后启动etcd：

systemctl daemon-reload         
    systemctl start etcd                    #启动etcd服务
    systemctl enable etcd                   #将该服务设置为开机自启动

在上述三个几点中要同时执行启动操作，否则在检测其他节点为未启动状态，从而导致启动失败。

查看服务是否启动正常：

[root@wecloud-test-k8s-2 ~]# systemctl status etcd.service 
    ● etcd.service - Etcd Server
       Loaded: loaded (/usr/lib/systemd/system/etcd.service; enabled; vendor preset: disabled)
       Active: active (running) since 一 2018-04-09 22:56:31 CST; 9h ago
         Docs: https://github.com/coreos
     Main PID: 17478 (etcd)
       CGroup: /system.slice/etcd.service
               └─17478 /usr/local/bin/etcd --name infra1 --cert-file=/etc/kubernetes/ssl/kubernetes.pem --key-file=/etc/kubernetes/ssl/kubern...
    
    4月 09 22:56:31 wecloud-test-k8s-2.novalocal etcd[17478]: e23bf6fd185b2dc5 became follower at term 318
    4月 09 22:56:31 wecloud-test-k8s-2.novalocal etcd[17478]: raft.node: e23bf6fd185b2dc5 elected leader c9b9711086e865e3 at term 318
    4月 09 22:56:31 wecloud-test-k8s-2.novalocal etcd[17478]: published {Name:infra1 ClientURLs:[https://192.168.99.189:2379]} to clus...9ef27d
    4月 09 22:56:31 wecloud-test-k8s-2.novalocal etcd[17478]: ready to serve client requests
    4月 09 22:56:31 wecloud-test-k8s-2.novalocal etcd[17478]: set the initial cluster version to 3.2
    4月 09 22:56:31 wecloud-test-k8s-2.novalocal etcd[17478]: enabled capabilities for version 3.2
    4月 09 22:56:31 wecloud-test-k8s-2.novalocal etcd[17478]: ready to serve client requests
    4月 09 22:56:31 wecloud-test-k8s-2.novalocal systemd[1]: Started Etcd Server.
    4月 09 22:56:31 wecloud-test-k8s-2.novalocal etcd[17478]: serving client requests on 192.168.99.189:2379
    4月 09 22:56:31 wecloud-test-k8s-2.novalocal etcd[17478]: serving insecure client requests on 127.0.0.1:2379, this is strongly discouraged!
    Hint: Some lines were ellipsized, use -l to show in full.

--------------------

## 查看etcd集群状态 ##

接下来查看etcd集群的健康状态是否正常：

[root@wecloud-test-k8s-2 ~]# etcdctl \
    > --ca-file=/etc/kubernetes/ssl/ca.pem \
    > --cert-file=/etc/kubernetes/ssl/kubernetes.pem \
    > --key-file=/etc/kubernetes/ssl/kubernetes-key.pem \
    > cluster-health
    member c9b9711086e865e3 is healthy: got healthy result from https://192.168.99.185:2379
    member e23bf6fd185b2dc5 is healthy: got healthy result from https://192.168.99.189:2379
    member e8523f41c93079cb is healthy: got healthy result from https://192.168.99.196:2379

可以看到三个etcd的节点都是healthy，说明集群状态是正常的。

--------------------

## 小结 ##

k8s使用etcd存储所有的数据，对整个k8s的状态判断有着非常重要的作用，在生产环境中建议将etcd集群单独部署。后续将会介绍k8s使用etcd集群的实例。

[https_www.jianshu.com_p_5aed73b288f7]: https://www.jianshu.com/p/5aed73b288f7
[https_coreos.com_etcd]: https://coreos.com/etcd/
[https_github.com_coreos_etcd_releases]: https://github.com/coreos/etcd/releases