Redis之数据持久化

浅浅的花香味﹌ 2022-05-23 13:35 278阅读 0赞

# 介绍 #

Redis是内存数据库，断电之后，内存中的数据会自动被抹除。这样就需要进行持久化操作，将内存中的数据同步到硬盘中，Redis支持两种数据持久化方法。RDB和AOF模式。

# RDB #

## **1、介绍** ##

RDB(Redis DataBase)可以在指定的时间间隔内将内存中的数据集（全部键值对），写入到磁盘中，生成经过压缩的二进制RDB文件，通过该文件可以还原数据库的状态。

## **2、命令及原理** ##

支持两个命令，都可以在客户端手动执行：

*  SAVE：SAVE命令由主进程执行，所以会阻塞主进程(客户端发送的所有命令都会被拒绝)，直到主进程执行完SAVE命令、重新开始接收命令请求之后，客户端发送的命令才会被处理。命令都进入了TCP套接字的缓冲区，存在于内核，并没有读取到用户区。这是epoll全部可读。
 *  BGSAVE：所谓的后台备份，BGSAVE命令会派生(fork)出一个子进程，专门负责创建RDB文件，服务器继续处理命令请求。
 *  BGSAVE原理：fork的作用是复制一个与当前进程一样的进程。新进程的所有数据（变量、环境变量、程序计数器等）数值都和原进程一致，但是是一个全新的进程，并作为原进程的子进程。  
    ![这里写图片描述][70]

## **3、间接性保存** ##

因为后台备份不会阻塞服务器，所以Redis允许用户通过配置文件设置SAVE选项，让服务器每隔一段时间自动执行一次BGSAVE命令。下面是关于RDB的配置说明。

################################ SNAPSHOTTING ################################
    #
    # Save the DB on disk:
    #
    # save <seconds> <changes>
    #
    # Will save the DB if both the given number of seconds and the given
    # number of write operations against the DB occurred.
    #
    # In the example below the behaviour will be to save:
    # after 900 sec (15 min) if at least 1 key changed
    # after 300 sec (5 min) if at least 10 keys changed
    # after 60 sec if at least 10000 keys changed
    #
    # Note: you can disable saving completely by commenting out all "save" lines.
    #
    # It is also possible to remove all the previously configured save
    # points by adding a save directive with a single empty string argument
    # like in the following example:
    #
    /* save ""，表示不执行RBD保存。 每个900s，修改1次，执行一次BGSAVE 或每隔300s，修改10次，执行一次BGSAVE 或每隔60s，修改10000次，执行一次BGSAVE 三个条件，任意一个满足，就会执行BGSAVE。 */
    # save ""
    
    save 900 1
    save 300 10
    save 60 10000
    
    # By default Redis will stop accepting writes if RDB snapshots are enabled
    # (at least one save point) and the latest background save failed.
    # This will make the user aware (in a hard way) that data is not persisting
    # on disk properly, otherwise chances are that no one will notice and some
    # disaster will happen.
    #
    # If the background saving process will start working again Redis will
    # automatically allow writes again.
    #
    # However if you have setup your proper monitoring of the Redis server
    # and persistence, you may want to disable this feature so that Redis will
    # continue to work as usual even if there are problems with disk,
    # permissions, and so forth.
    /* 后台备份不关注数据一致性，不一致的时候，继续接收写。 */
    stop-writes-on-bgsave-error yes
    
    # Compress string objects using LZF when dump .rdb databases?
    # For default that's set to 'yes' as it's almost always a win.
    # If you want to save some CPU in the saving child set it to 'no' but
    # the dataset will likely be bigger if you have compressible values or keys.
    /* 对于存储到磁盘中的快照，可以设置是否进行压缩存储。 如果是的话，redis会采用LZF算法进行压缩。 如果你不想消耗CPU来进行压缩的话，可以设置为关闭此功能。 */
    rdbcompression yes
    
    # Since version 5 of RDB a CRC64 checksum is placed at the end of the file.
    # This makes the format more resistant to corruption but there is a performance
    # hit to pay (around 10%) when saving and loading RDB files, so you can disable it
    # for maximum performances.
    #
    # RDB files created with checksum disabled have a checksum of zero that will
    # tell the loading code to skip the check.
    /* 在存储快照后，还可以让redis使用CRC64算法来进行数据校验，但是这样做会增加大约 10%的性能消耗，如果希望获取到最大的性能提升，可以关闭此功能。 */
    rdbchecksum yes
    
    # The filename where to dump the DB
    /* 当前服务器RDB文件的名字，最好每每个服务器对应一个名字，防止文件覆盖。 */
    dbfilename dump.rdb

**4、RDB优缺点**  
适合大规模的数据恢复，对数据完整性和一致性要求不高，在一定间隔时间做一次备份，所以如果redis意外down掉的话，就会丢失最后一次快照后的所有修改，fork的时候，内存中的数据被克隆了一份，大致2倍的膨胀性也是需要考虑。

# AOF #

有了前面的RDB为什么还需要有牛逼的AOF呢？因为对于RDB都会有一个实现限制，所以当服务器出现宕机，会出现大量的数据丢失。**于是出现了AOF，尽量减小数据的丢失**。

## **1、介绍** ##

AOF(Append Only File)，与RDB持久化通过保存数据库中的键值对来记录数据库状态不同，AOF持久化是通过保存Redis服务器所执行的**写命令来记录数据库状态**的。被写人 AOF文件的所有命令都是以Redis的命令请求协议格式保存的，因为Redis的命令请求协议是纯文本格式，所以我们可以直接打开一个AOF文件，观察其中的写命令。

## **2、命令及同步原理** ##

AOF持久化功能实现分为命令追加(append)、文件写入(write)、文件同步(sync)三个步骤。下面说明Redis内部如何实现这几个操作。

**命令追加：**  
当AOF持久化功能处于打开状态时，服务器在每次执行完一个写命令之后，会以协议格式将被执行的写命令追加到服务器状态的`aof_buf`缓冲区的末尾。

struct redisServer {
    
                //....................
        /* AOF persistence */
        int aof_state;                  /* AOF_(ON|OFF|WAIT_REWRITE) */
        int aof_fsync;                  /* Kind of fsync() policy */
        char *aof_filename;             /* Name of the AOF file */
        int aof_no_fsync_on_rewrite;    /* Don't fsync if a rewrite is in prog. */
        int aof_rewrite_perc;           /* Rewrite AOF if % growth is > M and... */
        off_t aof_rewrite_min_size;     /* the AOF file is at least N bytes. */
        off_t aof_rewrite_base_size;    /* AOF size on latest startup or rewrite. */
        off_t aof_current_size;         /* AOF current size. */
        int aof_rewrite_scheduled;      /* Rewrite once BGSAVE terminates. */
        pid_t aof_child_pid;            /* PID if rewriting process */
        list *aof_rewrite_buf_blocks;   /* Hold changes during an AOF rewrite. */
        sds aof_buf;      /* AOF buffer, written before entering the event loop */
        int aof_fd;       /* File descriptor of currently selected AOF file */
        int aof_selected_db; /* Currently selected DB in AOF */
        time_t aof_flush_postponed_start; /* UNIX time of postponed AOF flush */
        time_t aof_last_fsync;            /* UNIX time of last fsync() */
        time_t aof_rewrite_time_last;   /* Time used by last AOF rewrite run. */
        time_t aof_rewrite_time_start;  /* Current AOF rewrite start time. */
        int aof_lastbgrewrite_status;   /* C_OK or C_ERR */
        unsigned long aof_delayed_fsync;  /* delayed AOF fsync() counter */
        int aof_rewrite_incremental_fsync;/* fsync incrementally while rewriting? */
        int aof_last_write_status;      /* C_OK or C_ERR */
        int aof_last_write_errno;       /* Valid if aof_last_write_status is ERR */
        int aof_load_truncated;         /* Don't stop on unexpected AOF EOF. */
        int aof_use_rdb_preamble;       /* Use RDB preamble on AOF rewrites. */
        /* AOF pipes used to communicate between parent and child during rewrite. */
        int aof_pipe_write_data_to_child;
        int aof_pipe_read_data_from_parent;
        int aof_pipe_write_ack_to_parent;
        int aof_pipe_read_ack_from_child;
        int aof_pipe_write_ack_to_child;
        int aof_pipe_read_ack_from_parent;
        int aof_stop_sending_diff;     /* If true stop sending accumulated diffs to child process. */
        sds aof_child_diff;             /* AOF diff accumulator child side. */
        //............................
    }

上述就是服务器结构体中的`aof_buf`。这个缓冲区肯定是先保存在用户空间的内存中。每次服务器执行`SET`指令，后就会在sds这个`aof_buf`字符串后面添加对应的命令，这就是追加的过程，其实就是一个简单的动态字符串而已。

**写入和同步：**  
**Linux关于文件写入的方式，这是重点重点重点(参考Unix环境高级编程)**：  
传统的Uinx系统实现在内核中设有缓冲区高速缓存或页高速缓存，大多数磁盘I/O都通过缓冲区进行。当我们向文件写入数据时，为了提高效率，内核通常先将数据复制到缓冲区中，然后排入队列，晚些时候再写入磁盘，这种方式被称为延迟写。通常，当内核需要重用缓冲区来存放其他磁盘块数据时，它会把所有延迟写数据块写入磁盘。为了保证磁盘上实际文件系统与缓冲区中内容的一致性，系统提供了`sync、fsync、fdatasync`三个函数  
完全是为了解决磁盘写入慢的问题。

include<unistd.h>
    int fsync(int fd);
    /* 叫做同步，不进行延迟写。 对文件描述为fd，等待写磁盘结束才返回，通常用于数据库应用程序，确保修改过得块可以立即磁盘。 */
    int fdatasync(int fd);
    /* 类似于fsync，但是只影响文件数据部分。 */
    
    void sync (void);
    /* 异步操作：只是将所有修改过得块缓冲区从用户区排入写队列内核区，然后返回，不必等待写磁盘结束，何时真正写入磁盘，由操作系统的文件系统决定。不确定。 通常update守护进行周期调用，定时flush内核的块缓冲区。 */
    //返回值:若成功，返回0; 若出错，返回-1

在Redis服务器事件循环中，会调用`flushAppendOnlyFile`函数，考虑是否需要将`aof_buf`缓冲区中的内容写入(write)和保存到AOF文件里面。这个根据配置文件决定。

## **3、AOF重写** ##

[https://yq.aliyun.com/articles/193034][https_yq.aliyun.com_articles_193034]

因为AOF持久化是通过保存被执行的写命令来记录数据库状态的，所以随着服务器运行时间的流逝，AOF文件中的内容会越来越多(因为不仅需要记录数据，还需要记录命令)，文件的体积也会越来越大，如果不加以控制的话，体积过大的AOF文件很可能对Redis服务器、甚至整个宿主计算机造成影响，并且AOF文件的体积越大，使用AOF文件来进行数据还原所需的时间就越多。  
重写的原理：多个添加操作，能否经过处理变成一条添加的操作，那么存储会节省内存？**于是，先从数据库中读取键现在的值，然后用一条命令去记录键值对，代替之前记录这个键值对的多条命令，这就是 AOF 重写功能的实现原理。**  
在配置文件中，当AOF文件超过一定大小之后，就可以配置AOF重写功能了。这个重写是通过后台重写进程处理的。过程如下：

*  子进程进行AOF重写期间，服务器进程(父进程)可以继续处理命令请求。
 *  子进程带有服务器进程的数据副本，使用子进程而不是线程，可以在避免使用锁的情况下，保证数据的安全性。
 *  子进程在进行AOF重写期间，服务器进程还需要继续处理命令请求，而新的命令可能会对现有的数据库状态进行修改，从而使得服务器当前的数据库状态和重写后的 AOF 文件所保存的数据库状态不一致。为了解决这种数据不一致问题。Redis 服务器设置了一个AOF重写缓冲区，这个缓冲区在服务器创建子进程之后开始使用，当Redis服务器执行完一个写命令之后，它会同时将这个写命令发送给AOF缓冲区和AOF重写缓冲区。
 *  当子进程完成AOF重写工作之后，它会向父进程发送一个信号，父进程在接到该信号之后，会调用一个信号处理函数。首先将AOF重写缓冲区中的所有内容写入到新AOF文件中，这时新AOF文件所保存的数据库状态将和服务器当前的数据库状态一致。然后对新的AOF文件进行改名，原子地 (atomic) 覆盖现有的AOF文件，完成新旧两个AOF文件的替换，父进程就可以接收处理了。**在整个AOF后台重写过程中，只有信号处理函数执行时会对服务器进程(父进程)造成阻塞，在其他时候AOF后台重写都不会阻塞父进程，这将AOF重写对服务器性能造成的影响降到了最低。**

## **4、配置文件** ##

############################## APPEND ONLY MODE ###############################
    
    # By default Redis asynchronously dumps the dataset on disk. This mode is
    # good enough in many applications, but an issue with the Redis process or
    # a power outage may result into a few minutes of writes lost (depending on
    # the configured save points).
    #
    # The Append Only File is an alternative persistence mode that provides
    # much better durability. For instance using the default data fsync policy
    # (see later in the config file) Redis can lose just one second of writes in a
    # dramatic event like a server power outage, or a single write if something
    # wrong with the Redis process itself happens, but the operating system is
    # still running correctly.
    #
    # AOF and RDB persistence can be enabled at the same time without problems.
    # If the AOF is enabled on startup Redis will load the AOF, that is the file
    # with the better durability guarantees.
    #
    # Please check http://redis.io/topics/persistence for more information.
    /* 是否开启AOF选项 */
    appendonly no
    
    
    # The name of the append only file (default: "appendonly.aof")
    /* AOF文件名 */
    appendfilename "appendonly.aof"
    
    # The fsync() call tells the Operating System to actually write data on disk
    # instead of waiting for more data in the output buffer. Some OS will really flush
    # data on disk, some other OS will just try to do it ASAP.
    #
    # Redis supports three different modes:
    #
    # no: don't fsync, just let the OS flush the data when it wants. Faster.
    # always: fsync after every write to the append only log. Slow, Safest.
    # everysec: fsync only one time every second. Compromise.
    #
    # The default is "everysec", as that's usually the right compromise between
    # speed and data safety. It's up to you to understand if you can relax this to
    # "no" that will let the operating system flush the output buffer when
    # it wants, for better performances (but if you can live with the idea of
    # some data loss consider the default persistence mode that's snapshotting),
    # or on the contrary, use "always" that's very slow but a bit safer than
    # everysec.
    #
    # More details please check the following article:
    # http://antirez.com/post/redis-persistence-demystified.html
    #
    # If unsure, use "everysec".
    /* append追加策略: always在每次事件循环中，都将aof_buf中缓冲区内容写入(write)并同步(fsync)到AOF文件。 这种叫做同步持久化，效率最差，但是安全性最高，即使出现故障停机，AOF持久化也就丢失一个事件循环中的命令。 everysec在每次事件循环中，都将aof_buf中缓冲区内容写入(write)到AOF文件，这时候并不同步。 如果距离上次同步超过了1s，那么才对AOF文件进行同步(fsync)，并且同步由专门的线程负责。 异步同步，服务器每次将值写入AOF，但是每隔1s才进行一次同步，从效率上，everysec模块足够快，就算宕机，也就丢失1s中内的数据。 no在每次事件循环中，都将aof_buf中缓冲区内容写入(write)到AOF文件，不同步，至于合适同步由操作系统决定。因为flushAppendOnlyFile函数无需调用 fsync函数，不需要等待磁盘，所以写入速度是最快的，不过因为这种模式会在系统缝存中积累一段时间的写入数据，所以该模式的单次同步时长通常是三种模式中时间最长的。 */     从平摊操作的角度来看，no模式和everysec模式的效率类似，当出现故障停机使用no模式的服务器将丢失上次同步AOF文件之后的所有写命令数据。
    # appendfsync always
    appendfsync everysec
    # appendfsync no
    
    
    
    # When the AOF fsync policy is set to always or everysec, and a background
    # saving process (a background save or AOF log background rewriting) is
    # performing a lot of I/O against the disk, in some Linux configurations
    # Redis may block too long on the fsync() call. Note that there is no fix for
    # this currently, as even performing fsync in a different thread will block
    # our synchronous write(2) call.
    #
    # In order to mitigate this problem it's possible to use the following option
    # that will prevent fsync() from being called in the main process while a
    # BGSAVE or BGREWRITEAOF is in progress.
    #
    # This means that while another child is saving, the durability of Redis is
    # the same as "appendfsync none". In practical terms, this means that it is
    # possible to lose up to 30 seconds of log in the worst scenario (with the
    # default Linux settings).
    #
    # If you have latency problems turn this to "yes". Otherwise leave it as
    # "no" that is the safest pick from the point of view of durability.
    /* fsync同步函数可能占用大量IO操作，导致阻塞其他操作。 所以可以切换成sync异步模式，但是可能导致数据不完整。 */
    no-appendfsync-on-rewrite no
    
    
    # Automatic rewrite of the append only file.
    # Redis is able to automatically rewrite the log file implicitly calling
    # BGREWRITEAOF when the AOF log size grows by the specified percentage.
    #
    # This is how it works: Redis remembers the size of the AOF file after the
    # latest rewrite (if no rewrite has happened since the restart, the size of
    # the AOF at startup is used).
    #
    # This base size is compared to the current size. If the current size is
    # bigger than the specified percentage, the rewrite is triggered. Also
    # you need to specify a minimal size for the AOF file to be rewritten, this
    # is useful to avoid rewriting the AOF file even if the percentage increase
    # is reached but it is still pretty small.
    #
    # Specify a percentage of zero in order to disable the automatic AOF
    # rewrite feature.
    /* 自动重写，当AOF文件增长过大，则会自动fork子进程，重写AOF的大小。 详解，原理在前面已经讲解了，具体的代码就不细心揣摩了。 auto-aof-rewrite-percentage 代表全写先前AOF的多少，100代表全部重写 size代表当AOF到达多大才进行重写，大点的公司一般会是4G左右。 */
    auto-aof-rewrite-percentage 100
    auto-aof-rewrite-min-size 64mb
    
    
    
    # An AOF file may be found to be truncated at the end during the Redis
    # startup process, when the AOF data gets loaded back into memory.
    # This may happen when the system where Redis is running
    # crashes, especially when an ext4 filesystem is mounted without the
    # data=ordered option (however this can't happen when Redis itself
    # crashes or aborts but the operating system still works correctly).
    #
    # Redis can either exit with an error when this happens, or load as much
    # data as possible (the default now) and start if the AOF file is found
    # to be truncated at the end. The following option controls this behavior.
    #
    # If aof-load-truncated is set to yes, a truncated AOF file is loaded and
    # the Redis server starts emitting a log to inform the user of the event.
    # Otherwise if the option is set to no, the server aborts with an error
    # and refuses to start. When the option is set to no, the user requires
    # to fix the AOF file using the "redis-check-aof" utility before to restart
    # the server.
    #
    # Note that if the AOF file will be found to be corrupted in the middle
    # the server will still exit with an error. This option only applies when
    # Redis will try to read more data from the AOF file but not enough bytes
    # will be found.
    aof-load-truncated yes
    
    # When rewriting the AOF file, Redis is able to use an RDB preamble in the
    # AOF file for faster rewrites and recoveries. When this option is turned
    # on the rewritten AOF file is composed of two different stanzas:
    #
    #   [RDB file][AOF tail]
    #
    # When loading Redis recognizes that the AOF file starts with the "REDIS"
    # string and loads the prefixed RDB file, and continues loading the AOF
    # tail.
    #
    # This is currently turned off by default in order to avoid the surprise
    # of a format change, but will at some point be used as the default.
    /* 是否使用AOF和RDB一起持久化 */
    aof-use-rdb-preamble no

**4、AOF对比于RDB**

*  RDB持久化方式能够在指定的时间间隔能对数据进行快照存储。
 *  AOF持久化方式记录每次对服务器写的操作,当服务器重启的时候会重新执行这些  
    命令来恢复原始的数据，AOF命令以Redis协议追加保存每次写的操作到文件末尾.。Redis还能对AOF文件进行后台重写，使得AOF文件的体积不至于过大。
 *  作为分布式缓存可以不使用任何持久化方式。
 *  同时开启两种持久化方式，在这种情况下，当redis重启的时候会优先载入AOF文件来恢复原始的数据，因为在通常情况下AOF文件保存的数据集要比RDB文件保存的数据集要完整。RDB的数据不实时，同时使用两者时服务器重启也只会找AOF文件。那要不要只使用AOF呢？作者建议不要，因为RDB更适合用于备份数据库(AOF在不断变化不好备份)，快速重启，而且不会有AOF可能潜在的bug，留着作为一个万一的手段。
 *  性能建议，因为RDB文件只用作后备用途，建议只在Slave上持久化RDB文件，而且只要15分钟备份一次就够了，只保留save 900 1这条规则。
 *  如果使用了AOF，好处是在最恶劣情况下也只会丢失不超过两秒数据，代价一是带来了持续的IO；二是AOF rewrite的最后将rewrite过程中产生的新数据写到新文件造成的阻塞几乎是不可避免的(通常启动后台进程减少主进程的命令处理)。只要硬盘许可，应该尽量减少AOF rewrite的频率，AOF重写的基础大小默认值64M太小了，可以设到5G以上。默认超过原大小100%大小时重写可以改到适当的数值。

[70]: /images/20220523/f0c73ff26d8d4d988bd0fa1b703feb8a.png
[https_yq.aliyun.com_articles_193034]: https://yq.aliyun.com/articles/193034