[Linux][运维]SaltStack安装Apache/Mysql/PHP部署Wordpress

小咪咪 2022-05-19 09:54 211阅读 0赞

## salt介绍 ##

SaltStack是一个服务器基础架构集中化管理平台，具备配置管理、远程执行、监控等功能，基于Python语言实现，结合轻量级消息队列（ZeroMQ）与Python第三方模块（Pyzmq、PyCrypto、Pyjinjia2、python-msgpack和PyYAML等）构建。

SaltStack 采用 C/S模式，server端就是salt的master，client端就是minion，minion与master之间通过ZeroMQ消息队列通信。

master监听4505和4506端口，4505对应的是ZMQ的PUB system，用来发送消息，4506对应的是REP system是来接受消息的。

#### 命令执行步骤 ####

具体步骤如下

*  Salt stack的Master与Minion之间通过ZeroMq进行消息传递，使用了ZeroMq的发布-订阅模式，连接方式包括tcp，ipc
 *  salt命令，将cmd.run ls命令从salt.client.LocalClient.cmd\_cli发布到master，获取一个Jodid，根据jobid获取命令执行结果。
 *  master接收到命令后，将要执行的命令发送给客户端minion。
 *  minion从消息总线上接收到要处理的命令，交给minion.\_handle\_aes处理
 *  minion.\_handle\_aes发起一个本地线程调用cmdmod执行ls命令。线程执行完ls后，调用minion.\_return\_pub方法，将执行结果通过消息总线返回给master
 *  master接收到客户端返回的结果，调用master.\_handle\_aes方法，将结果写的文件中
 *  salt.client.LocalClient.cmd\_cli通过轮询获取Job执行结果，将结果输出到终端。

## saltstack安装 ##

#### 测试环境 ####

*  CentOS6.5
 *  master：172.20.22.46 (主机名：hadoop1) \# 之前配置Spark改的名字
 *  slave：172.20.22.159 (主机名：hadoop2)

#### 分为以下几步 ####

##### 关闭selinux #####

/etc/selinux/config，把SELINUX=enforcing改为SELINUX=disabled

##### master安装salt-minion, salt-master #####

Google

##### slave安装salt-minion #####

Google

##### 配置salt-master #####

参考

#指定master，冒号后有一个空格
    master: 192.168.2.22
    user: root
    
    #-------以下为可选--------------
    # salt运行的用户，影响到salt的执行权限
    user: root
    #s alt的运行线程，开的线程越多一般处理的速度越快，但一般不要超过CPU的个数
    worker_threads: 10
    # master的管理端口
    publish_port : 4505
    # master跟minion的通讯端口，用于文件服务，认证，接受返回结果等
    ret_port : 4506
    # 如果这个master运行的salt-syndic连接到了一个更高层级的master,那么这个参数需要配置成连接到的这个高层级master的监听端口
    syndic_master_port : 4506
    # 指定pid文件位置
    pidfile: /var/run/salt-master.pid
    # saltstack 可以控制的文件系统的开始位置
    root_dir: /
    # 日志文件地址
    log_file: /var/log/salt_master.log
    # 分组设置
    nodegroups:
      group_all: '*'
    # salt state执行时候的根目录
    file_roots:
      base:
        - /srv/salt/
    # 设置pillar 的根目录
    pillar_roots:
      base:
        - /srv/pillar

本文主要改动

file_roots:
      base:
        - /srv/salt/base
      dev:
        - /srv/salt/dev
      test:
        - /srv/salt/test
      prod:
        - /srv/salt/prod

##### 配置salt-minion #####

参考

#指定master，冒号后有一个空格
    master: 192.168.2.22
    id: minion-01
    user: root
    
    #-------以下为可选--------------
    # minion的识别ID，可以是IP，域名，或是可以通过DNS解析的字符串
    id: 192.168.0.100
    # salt运行的用户权限
    user: root
    # master的识别ID，可以是IP，域名，或是可以通过DNS解析的字符串
    master : 192.168.0.100
    # master通讯端口
    master_port: 4506
    # 备份模式，minion是本地备份，当进行文件管理时的文件备份模式
    backup_mode: minion
    # 执行salt-call时候的输出方式
    output: nested 
    # minion等待master接受认证的时间
    acceptance_wait_time: 10
    # 失败重连次数，0表示无限次，非零会不断尝试到设置值后停止尝试
    acceptance_wait_time_max: 0
    # 重新认证延迟时间，可以避免因为master的key改变导致minion需要重新认证的syn风暴
    random_reauth_delay: 60
    # 日志文件位置
    log_file: /var/logs/salt_minion.log
    # 文件路径基本位置
    file_roots:
      base:
        - /etc/salt/minion/file
    # pillar基本位置
    pillar_roots:
      base:
        - /data/salt/minion/pillar

本文主要改动

master : 172.20.22.46
    grains:
      roles:
        - nginx
      env:
        - test
      myname:
        - yzd

##### 启动/重启salt #####

sudo service salt-master start/restart

sudo service salt-minion start/restart

##### master认证minion的key #####

Google

##### 检查安装是否完成 #####

[root@hadoop1 Desktop]# salt-run manage.status
    down:
    up:
        - hadoop1
        - hadoop2
    
    [root@hadoop1 Desktop]# salt '*' grains.item os myname
    hadoop1:
        ----------
        myname:
        os:
            CentOS
    hadoop2:
        ----------
        myname: # 自定义的grains
            - yzd
        os:
            CentOS

##### 其它 #####

关于grains/pillar/state等可以查阅文档

## 部署WordPress ##

### 环境要求 ###

> 摘自官网  
> We recommend servers running version 7.2 or greater of PHP and MySQL version 5.6 OR MariaDB version 10.0 or greater.  
> We also recommend either Apache or Nginx as the most robust options for running WordPress, but neither is required.

最后的完整文件树

[root@hadoop1 base]# tree
    .
    ├── mysql
    │   ├── conf.sls
    │   ├── files
    │   │   ├── conf.sh
    │   │   ├── my.cnf
    │   │   ├── mysql-5.5.60.tar.gz
    │   │   ├── mysql-5.6.40.tar.gz
    │   │   ├── mysqld
    │   │   └── mysqllns.sh
    │   ├── init.sls
    │   └── install.sls
    ├── top.sls
    ├── web
    │   ├── apache.sls
    │   ├── ap.sls
    │   └── files
    │       ├── apache-conf.d
    │       │   ├── mod_dnssd.conf
    │       │   ├── php.conf
    │       │   ├── README
    │       │   └── welcome.conf
    │       ├── httpd.conf
    │       └── php.ini
    └── wordpress
        ├── files
        │   ├── wordpress-latest.tar.gz
        │   └── wordpress-yang.tar.gz
        └── wp-install.sls
    
    7 directories, 21 files

### 安装Apache和Php ###

#### 流程 ####

*  安装apache和php依赖
 *  将主机的apache和php配置文件覆盖从机文件
 *  运行apache服务

web/ap.sls：

lamp-install:
      pkg.installed:
        - pkgs:
          - httpd
          - php
          - php-pdo
          - php-mysql
          - php-gd
    
    apache-config:
      file.managed:
        - name: /etc/httpd/conf/httpd.conf #服务实际使用的文件路径
        - source: salt://web/files/httpd.conf #salt的源文件用于分发到minion上面 路径是base目录下面的web 这里也支持http和ftp方式
        - user: root
        - group: root
        - mode: 644
        - require:
          - pkg: lamp-install
    
    php-config:
      file.managed:
        - name: /etc/php.ini
        - source: salt://web/files/php.ini
        - user: root
        - group: root
        - mode: 644
    
    #使用watch在apache配置文件发送变化时，重新加载apache配置
    lamp-service:
      service.running:
        - name: httpd
        - enable: True
        - reload: True  #如果不加reload 默认会重启服务
        - watch: #增加
          - file: apache-config #监控上面的apache-config ID 所以说 一个ID在一个状态只能出现一次
    
    apache-conf:
      file.recurse:
        - name: /etc/httpd/conf.d
        - source: salt://web/files/apache-conf.d

运行结果：

[root@hadoop1 base]# salt 'hadoop2' state.sls web.ap
    hadoop2:
    ----------
              ID: lamp-install
        Function: pkg.installed
          Result: True
         Comment: 4 targeted packages were installed/updated. The following packages were already installed: httpd
         Started: 09:14:41.225378
        Duration: 64220.577 ms
         Changes:   
                  ----------
                  libXpm:
                      ----------
                      new:
                          3.5.10-2.el6
                      old:
                  php:
                      ----------
                      new:
                          5.3.3-49.el6
                      old:
                  php-cli:
                      ----------
                      new:
                          5.3.3-49.el6
                      old:
                  php-common:
                      ----------
                      new:
                          5.3.3-49.el6
                      old:
                  php-gd:
                      ----------
                      new:
                          5.3.3-49.el6
                      old:
                  php-mysql:
                      ----------
                      new:
                          5.3.3-49.el6
                      old:
                  php-pdo:
                      ----------
                      new:
                          5.3.3-49.el6
                      old:
    ----------
              ID: apache-config
        Function: file.managed
            Name: /etc/httpd/conf/httpd.conf
          Result: True
         Comment: File /etc/httpd/conf/httpd.conf is in the correct state
         Started: 09:15:45.451376
        Duration: 14.631 ms
         Changes:   
    ----------
              ID: php-config
        Function: file.managed
            Name: /etc/php.ini
          Result: True
         Comment: File /etc/php.ini is in the correct state
         Started: 09:15:45.466131
        Duration: 4.601 ms
         Changes:   
    ----------
              ID: lamp-service
        Function: service.running
            Name: httpd
          Result: True
         Comment: Service httpd has been enabled, and is running
         Started: 09:15:45.477085
        Duration: 477.583 ms
         Changes:   
                  ----------
                  httpd:
                      True
    ----------
              ID: apache-conf
        Function: file.recurse
            Name: /etc/httpd/conf.d
          Result: True
         Comment: Recursively updated /etc/httpd/conf.d
         Started: 09:15:45.954926
        Duration: 149.052 ms
         Changes:   
                  ----------
                  /etc/httpd/conf.d/welcome.conf:
                      ----------
                      diff:
                          ---  
                          +++  
                          @@ -9,3 +9,4 @@
                               ErrorDocument 403 /error/noindex.html
                           </LocationMatch>
    
    
    Summary
    ------------
    Succeeded: 5 (changed=3)
    Failed:    0
    ------------
    Total states run:     5

### 安装Mysql5.6 ###

**注意：CentOS6 yum自带的Mysql版本是5.1，达不到wordpress的最低版本要求。这里我们使用源码安装mysql5.6。步骤比较多，坑也很多。**

#### 流程 ####

*  传输mysql源码包至从机
 *  解压源码包
 *  安装编译所需依赖
 *  源码安装mysql
 *  将主机my.cnf覆盖从机文件
 *  运行conf.sh，使用scripts/mysql\_install\_db建立数据库
 *  运行mysqllns.sh创建所需要的软连接
 *  将主机mysqld覆盖从机文件
 *  运行mysqld

init.sls

include:
      - mysql.install
      - mysql.conf

install.sls

#install source mysql
    mysql_source:
      file.managed:
        - name: /home/mysql-5.6.40.tar.gz
        - unless: test -e /home/mysql-5.6.40.tar.gz
        - source: salt://mysql/files/mysql-5.6.40.tar.gz
    
    #tar source mysql
    extract_mysql:
      cmd.run:
        - cwd: /home
        - names:
            - tar xf mysql-5.6.40.tar.gz
        - unless: test -d /home/mysql-5.6.40
        - require:
            - file: mysql_source
    
    #useradd for mysql
    mysql_user:
      user.present:
        - name: mysql
        - uid: 1024
        - createhome: False
        - gid_from_name: True
        - shell: /sbin/nologin
    
    #mysql pkg.install
    mysql_pkg:
      pkg.installed:
        - pkgs:
          - gcc
          - gcc-c++
          - autoconf
          - automake
          - openssl
          - openssl-devel
          - zlib
          - zlib-devel
          - ncurses-devel
          - libtool-ltdl-devel
          - cmake
    
    #mysql source install
    mysql_commpile:
      cmd.run:
        - cwd: /home/mysql-5.6.40
        - names:
            - chown root:root /home/mysql-5.6.40 -R
            - cmake -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_DATADIR=/usr/local/mysql/data -DDEFAULT_CHARSET=utf8  -DDEFAULT_COLLATTON=utf8_cuicode_ci   -DWITH_READLINE=1 -DWITH_SSL=system -DWITH_EMBEDDED_SERVER=1  -DENABLED_LOCAL_INFILE=1 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_MYISAM_STORAGE_ENGINE=1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_DEBUG=0
            - make
            - make install
        - require:
            - cmd: extract_mysql
            - pkg: mysql_pkg
        - unless: test -d /usr/local/mysql

conf.sls

include:
      - mysql.install
    
    # mysql for config
    mysql_cnf:
      file.managed:
        - name: /etc/my.cnf
        - user: root
        - mode: 755
        - source: salt://mysql/files/my.cnf
    
    # mysql init
    salt://mysql/files/conf.sh:
      cmd.script:
          - env:
              - BATCH: 'yes'
          - require:
              - cmd: mysql_commpile
              - pkg: mysql_pkg 
    
    # mysql lnk
    salt://mysql/files/mysqllns.sh:
      cmd.script:
        - env:
          - BATCH: 'yes'
        - require:
          - cmd: mysql_commpile
          - pkg: mysql_pkg
    
    # mysql server
    mysql_service:
       file.managed:
         - name: /etc/init.d/mysqld
         - user: root
         - mode: 755
         - source: salt://mysql/files/mysqld
       cmd.run:
         - names:
             - /sbin/chkconfig --add mysqld
             - /sbin/chkconfig --level 35 mysqld on
         - unless: /sbin/chkconfig --list mysqld
       service.running:
         - name: mysqld
         - enable: True
         - reload: True

conf.sh：

#!/bin/bash
    /usr/local/mysql/scripts/mysql_install_db --user=mysql --basedir=/usr/local/mysql/ --datadir=/usr/local/mysql/data/

mysqllns.sh

#!/bin/bash
    ln -sv /usr/local/mysql/bin/mysql /usr/bin 
    ln -sv /usr/local/mysql/bin/mysqladmin /usr/bin/
    ln -sv /usr/local/mysql/bin/mysqldump /usr/bin/
    #mysql competence
    /bin/chown -R mysql.mysql /usr/local/mysql/ && /bin/chown -R mysql.mysql /usr/local/mysql/data/
    #for wordpress
    mkdir /var/lib/mysql
    ln -sv /usr/local/mysql/data/mysql.sock /var/lib/mysql/

mysqld

#!/bin/sh
    # chkconfig: 2345 10 50
    # description: mysqld
    basedir=/usr/local/mysql/
    datadir=/usr/local/mysql/data/

注意：  
需要添加下面两行来保证chkconfig设置成功

#!/bin/sh
    # chkconfig: 2345 10 50

#### 运行结果 ####

由于首次运行编译返回日志过长，为了美观的结果，运行了两次，所以软连接脚本显示失败（文件已存在）

[root@hadoop1 base]# salt 'hadoop2' state.sls mysql.init
    hadoop2:
    ----------
              ID: mysql_source
        Function: file.managed
            Name: /home/mysql-5.6.40.tar.gz
          Result: True
         Comment: unless execution succeeded
         Started: 10:09:23.030270
        Duration: 888.041 ms
         Changes:   
    ----------
              ID: extract_mysql
        Function: cmd.run
            Name: tar xf mysql-5.6.40.tar.gz
          Result: True
         Comment: unless execution succeeded
         Started: 10:09:23.919593
        Duration: 7.14 ms
         Changes:   
    ----------
              ID: mysql_user
        Function: user.present
            Name: mysql
          Result: True
         Comment: User mysql is present and up to date
         Started: 10:09:23.927631
        Duration: 2.501 ms
         Changes:   
    ----------
              ID: mysql_pkg
        Function: pkg.installed
          Result: True
         Comment: All specified packages are already installed.
         Started: 10:09:23.931484
        Duration: 2006.185 ms
         Changes:   
    ----------
              ID: mysql_commpile
        Function: cmd.run
            Name: cmake -DCMAKE_INSTALL_PREFIX=/usr/local/mysql -DMYSQL_DATADIR=/usr/local/mysql/data -DDEFAULT_CHARSET=utf8  -DDEFAULT_COLLATTON=utf8_cuicode_ci   -DWITH_READLINE=1 -DWITH_SSL=system -DWITH_EMBEDDED_SERVER=1  -DENABLED_LOCAL_INFILE=1 -DDEFAULT_COLLATION=utf8_general_ci -DWITH_MYISAM_STORAGE_ENGINE=1 -DWITH_INNOBASE_STORAGE_ENGINE=1 -DWITH_DEBUG=0
          Result: True
         Comment: unless execution succeeded
         Started: 10:09:25.939461
        Duration: 8.829 ms
         Changes:   
    ----------
              ID: mysql_commpile
        Function: cmd.run
            Name: make
          Result: True
         Comment: unless execution succeeded
         Started: 10:09:25.948913
        Duration: 5.983 ms
         Changes:   
    ----------
              ID: mysql_commpile
        Function: cmd.run
            Name: make install
          Result: True
         Comment: unless execution succeeded
         Started: 10:09:25.955397
        Duration: 6.567 ms
         Changes:   
    ----------
              ID: mysql_cnf
        Function: file.managed
            Name: /etc/my.cnf
          Result: True
         Comment: File /etc/my.cnf is in the correct state
         Started: 10:09:25.962408
        Duration: 4.894 ms
         Changes:   
    ----------
              ID: salt://mysql/files/conf.sh
        Function: cmd.script
          Result: True
         Comment: Command 'salt://mysql/files/conf.sh' run
         Started: 10:09:25.967900
        Duration: 200740.417 ms
         Changes:   
                  ----------
                  pid:
                      28643
                  retcode:
                      0
                  stderr:
                      2018-07-24 10:09:26 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details).
                      2018-07-24 10:09:26 0 [Note] Ignoring --secure-file-priv value as server is running with --bootstrap.
                      2018-07-24 10:09:26 0 [Note] /usr/local/mysql//bin/mysqld (mysqld 5.6.40) starting as process 28647 ...
                      2018-07-24 10:11:06 0 [Warning] TIMESTAMP with implicit DEFAULT value is deprecated. Please use --explicit_defaults_for_timestamp server option (see documentation for more details).
                      2018-07-24 10:11:06 0 [Note] Ignoring --secure-file-priv value as server is running with --bootstrap.
                      2018-07-24 10:11:06 0 [Note] /usr/local/mysql//bin/mysqld (mysqld 5.6.40) starting as process 28744 ...
                  stdout:
                      Installing MySQL system tables...OK
    
                      Filling help tables...OK
    
                      To start mysqld at boot time you have to copy
                      support-files/mysql.server to the right place for your system
    
                      PLEASE REMEMBER TO SET A PASSWORD FOR THE MySQL root USER !
                      To do so, start the server, then issue the following commands:
    
                        /usr/local/mysql//bin/mysqladmin -u root password 'new-password'
                        /usr/local/mysql//bin/mysqladmin -u root -h 192.168.253.62 password 'new-password'
    
                      Alternatively you can run:
    
                        /usr/local/mysql//bin/mysql_secure_installation
    
                      which will also give you the option of removing the test
                      databases and anonymous user created by default.  This is
                      strongly recommended for production servers.
    
                      See the manual for more instructions.
    
                      You can start the MySQL daemon with:
    
                        cd . ; /usr/local/mysql//bin/mysqld_safe &
    
                      You can test the MySQL daemon with mysql-test-run.pl
    
                        cd mysql-test ; perl mysql-test-run.pl
    
                      Please report any problems at http://bugs.mysql.com/
    
                      The latest information about MySQL is available on the web at
    
                        http://www.mysql.com
    
                      Support MySQL by buying support/licenses at http://shop.mysql.com
    
                      WARNING: Found existing config file /usr/local/mysql//my.cnf on the system.
                      Because this file might be in use, it was not replaced,
                      but was used in bootstrap (unless you used --defaults-file)
                      and when you later start the server.
                      The new default config file was created as /usr/local/mysql//my-new.cnf,
                      please compare it with your file and take the changes you need.
    
                      WARNING: Default config file /etc/my.cnf exists on the system
                      This file will be read by default by the MySQL server
                      If you do not want to use this, either remove it, or use the
                      --defaults-file argument to mysqld_safe when starting the server
    ----------
              ID: salt://mysql/files/mysqllns.sh
        Function: cmd.script
          Result: False
         Comment: Command 'salt://mysql/files/mysqllns.sh' run
         Started: 10:12:46.710451
        Duration: 262.12 ms
         Changes:   
                  ----------
                  pid:
                      28810
                  retcode:
                      1
                  stderr:
                      ln: creating symbolic link `/usr/bin/mysql': File exists
                      ln: creating symbolic link `/usr/bin/mysqladmin': File exists
                      ln: creating symbolic link `/usr/bin/mysqldump': File exists
                      mkdir: cannot create directory `/var/lib/mysql': File exists
                      ln: creating symbolic link `/var/lib/mysql/mysql.sock': File exists
                  stdout:
    ----------
              ID: mysql_service
        Function: file.managed
            Name: /etc/init.d/mysqld
          Result: True
         Comment: File /etc/init.d/mysqld is in the correct state
         Started: 10:12:46.972872
        Duration: 4.936 ms
         Changes:   
    ----------
              ID: mysql_service
        Function: cmd.run
            Name: /sbin/chkconfig --add mysqld
          Result: True
         Comment: unless execution succeeded
         Started: 10:12:46.977924
        Duration: 10.248 ms
         Changes:   
    ----------
              ID: mysql_service
        Function: cmd.run
            Name: /sbin/chkconfig --level 35 mysqld on
          Result: True
         Comment: unless execution succeeded
         Started: 10:12:46.988419
        Duration: 6.787 ms
         Changes:   
    ----------
              ID: mysql_service
        Function: service.running
            Name: mysql
          Result: True
         Comment: Service mysql has been enabled, and is in the desired state
         Started: 10:12:46.995438
        Duration: 236.708 ms
         Changes:   
                  ----------
                  mysql:
                      True
    
    Summary
    -------------
    Succeeded: 13 (changed=3)
    Failed:     1
    -------------
    Total states run:     14

### 安装wordpress ###

#### 流程 ####

*  将wordpress解压至/var/www/html
 *  修改wp-config.php并发送至从机
 *  在数据库新建名为wordpress数据库

wp-install.sls

# copy tar.gz
    wordpress_source:
      file.managed:
        - name: /home/wordpress-yang.tar.gz
        - unless: test -e /home/wordpress-yang.tar.gz
        - source: salt://wordpress/files/wordpress-yang.tar.gz
    
    #tar source
    extract_wordpress:
      cmd.run:
        - cwd: /home
        - names:
            - tar xf wordpress-yang.tar.gz
            - chown root:root /home/wordpress -R
        - unless: test -d /home/wordpress
        - require:
            - file: wordpress_source
    
    # move to www
    move_wordpress:
      cmd.run:
        - cwd: /home
        - names:
          - cp -rf wordpress/* /var/www/html/
          - mysql -uroot -e "create database IF NOT EXISTS wordpress"
        - require:
          - cmd: extract_wordpress

#### 运行结果 ####

[root@hadoop1 base]# salt 'hadoop2' state.sls wordpress.wp-install
    hadoop2:
    ----------
              ID: wordpress_source
        Function: file.managed
            Name: /home/wordpress-yang.tar.gz
          Result: True
         Comment: unless execution succeeded
         Started: 10:22:32.580145
        Duration: 1199.729 ms
         Changes:   
    ----------
              ID: extract_wordpress
        Function: cmd.run
            Name: tar xf wordpress-yang.tar.gz
          Result: True
         Comment: unless execution succeeded
         Started: 10:22:33.780510
        Duration: 9.208 ms
         Changes:   
    ----------
              ID: extract_wordpress
        Function: cmd.run
            Name: chown root:root /home/wordpress -R
          Result: True
         Comment: unless execution succeeded
         Started: 10:22:33.790282
        Duration: 6.722 ms
         Changes:   
    ----------
              ID: move_wordpress
        Function: cmd.run
            Name: cp -rf wordpress/* /var/www/html/
          Result: True
         Comment: Command "cp -rf wordpress/* /var/www/html/" run
         Started: 10:22:33.797953
        Duration: 2065.049 ms
         Changes:   
                  ----------
                  pid:
                      29030
                  retcode:
                      0
                  stderr:
                  stdout:
    ----------
              ID: move_wordpress
        Function: cmd.run
            Name: mysql -uroot -e "create database IF NOT EXISTS wordpress"
          Result: True
         Comment: Command "mysql -uroot -e "create database IF NOT EXISTS wordpress"" run
         Started: 10:22:35.863419
        Duration: 53.151 ms
         Changes:   
                  ----------
                  pid:
                      29033
                  retcode:
                      0
                  stderr:
                  stdout:
    
    Summary
    ------------
    Succeeded: 5 (changed=2)
    Failed:    0
    ------------
    Total states run:     5

![这里写图片描述][70]

## 总结 ##

成功通过master的saltstack为slave安装lamp环境，并将openstack部署成功。

### 遇到的问题整理 ###

#### 无法运行state.sls ####

报错the function “state.highstate” is running as PID xxxx  
kill掉slave的进程

#### php admin不显示网页 ####

重启apache  
sudo service httpd restart

#### MySQL启动报：\[ERROR\] The server quit without updating PID file ####

[https://blog.csdn.net/ydyang1126/article/details/72473828][https_blog.csdn.net_ydyang1126_article_details_72473828]

#### cmd.run的顺序控制 ####

[https://www.jianshu.com/p/624b9cf51c64][https_www.jianshu.com_p_624b9cf51c64]

查看顺序  
salt ‘hadoop2’ state.show\_sls wordpress.wp-install  
order越小越早执行，-1是最后

#### Can’t connect to local MySQL server through socket ‘/tmp/mysql.sock’ (2) ####

[http://aiezu.com/article/mysql\_cant\_connect\_through\_socket.html][http_aiezu.com_article_mysql_cant_connect_through_socket.html]

#### service mysqld does not support chkconfig ####

[https://www.cnblogs.com/niocai/archive/2012/07/12/2587780.html][https_www.cnblogs.com_niocai_archive_2012_07_12_2587780.html]

#### unless命令 ####

[http://blog.51cto.com/732233048/1677843][http_blog.51cto.com_732233048_1677843]

unless：用于检查的命令，仅当`unless`选项指向的命令返回false时才执行name指向的命令

若minion端不存在/tmp/nginx-1.4.5.tar.gz这个文件，才会执行这个file模块

## 参考 ##

[https://www.jianshu.com/p/624b9cf51c64][https_www.jianshu.com_p_624b9cf51c64]  
[https://blog.csdn.net/chengyuqiang/article/details/78119322][https_blog.csdn.net_chengyuqiang_article_details_78119322]  
[https://www.linuxidc.com/Linux/2017-12/149615.html][https_www.linuxidc.com_Linux_2017-12_149615.html]  
[http://www.cnblogs.com/xiewenming/p/7674806.html][http_www.cnblogs.com_xiewenming_p_7674806.html]

[70]: /images/20220519/1935e6179133468d9db5313c6780d574.png
[https_blog.csdn.net_ydyang1126_article_details_72473828]: https://blog.csdn.net/ydyang1126/article/details/72473828
[https_www.jianshu.com_p_624b9cf51c64]: https://www.jianshu.com/p/624b9cf51c64
[http_aiezu.com_article_mysql_cant_connect_through_socket.html]: http://aiezu.com/article/mysql_cant_connect_through_socket.html
[https_www.cnblogs.com_niocai_archive_2012_07_12_2587780.html]: https://www.cnblogs.com/niocai/archive/2012/07/12/2587780.html
[http_blog.51cto.com_732233048_1677843]: http://blog.51cto.com/732233048/1677843
[https_blog.csdn.net_chengyuqiang_article_details_78119322]: https://blog.csdn.net/chengyuqiang/article/details/78119322
[https_www.linuxidc.com_Linux_2017-12_149615.html]: https://www.linuxidc.com/Linux/2017-12/149615.html
[http_www.cnblogs.com_xiewenming_p_7674806.html]: http://www.cnblogs.com/xiewenming/p/7674806.html