linux 命令 xxd

╰+攻爆jí腚メ 2022-05-16 12:06 199阅读 0赞

xxd，可以查看linux下文件的二进制表示，man一下xxd，可以得到以下信息

NAME  
       xxd - make a hexdump or do the reverse.  
  
  
SYNOPSIS  
       xxd -h\[elp\]  
       xxd \[options\] \[infile \[outfile\]\]  
       xxd -r\[evert\] \[options\] \[infile \[outfile\]\]  
  
  
DESCRIPTION  
       xxd  creates  a hex dump of a given file or standard input.  It can also convert a hex dump back to its original binary form.  Like uuencode(1) and uudecode(1) it allows the  
       transmission of binary data in a \`mail-safe' ASCII representation, but has the advantage of decoding to standard output.  Moreover, it can be used  to  perform  binary  file  
       patching.  
  
  
OPTIONS  
       If no infile is given, standard input is read.  If infile is specified as a \`-' character, then input is taken from standard input.  If no outfile is given (or a \`-' charac‐  
       ter is in its place), results are sent to standard output.  
  
  
       Note that a "lazy" parser is used which does not check for more than the first option letter, unless the option is followed by a parameter.  Spaces between a  single  option  
       letter and its parameter are optional.  Parameters to options can be specified in decimal, hexadecimal or octal notation.  Thus -c8, -c 8, -c 010 and -cols 8 are all equiva‐  
       lent.  
  
  
       -a | -autoskip  
              toggle autoskip: A single '\*' replaces nul-lines.  Default off.  
  
  
       -b | -bits  
              Switch to bits (binary digits) dump, rather than hexdump.  This option writes octets as eight digits "1"s and "0"s instead of a normal hexadecimal dump. Each line  is  
              preceded by a line number in hexadecimal and followed by an ascii (or ebcdic) representation. The command line switches -r, -p, -i do not work with this mode.  
  
  
       -c cols | -cols cols  
              format <cols> octets per line. Default 16 (-i: 12, -ps: 30, -b: 6). Max 256.  
  
  
       -E | -EBCDIC  
              Change  the character encoding in the righthand column from ASCII to EBCDIC.  This does not change the hexadecimal representation. The option is meaningless in combi‐  
              nations with -r, -p or -i.  
  
  
       -g bytes | -groupsize bytes  
              separate the output of every <bytes> bytes (two hex characters or eight bit-digits each) by a whitespace.  Specify -g 0 to suppress grouping.  <Bytes> defaults  to  2  
              in normal mode and 1 in bits mode.  Grouping does not apply to postscript or include style.  
  
  
       -h | -help  
              print a summary of available commands and exit.  No hex dumping is performed.

-i | -include  
              output in C include file style. A complete static array definition is written (named after the input file), unless xxd reads from stdin.  
  
  
       -l len | -len len  
              stop after writing <len> octets.  
  
  
       -p | -ps | -postscript | -plain  
              output in postscript continuous hexdump style. Also known as plain hexdump style.  
  
  
       -r | -revert  
              reverse operation: convert (or patch) hexdump into binary.  If not writing to stdout, xxd writes into its output file without truncating it. Use the combination -r -p  
              to read plain hexadecimal dumps without line number information and without a particular column layout. Additional Whitespace and line-breaks are allowed anywhere.  
  
  
       -seek offset  
              When used after -r: revert with <offset> added to file positions found in hexdump.  
  
  
       -s \[+\]\[-\]seek  
              start at <seek> bytes abs. (or rel.) infile offset.  + indicates that the seek is relative to the current stdin file  position  (meaningless  when  not  reading  from  
              stdin).   - indicates that the seek should be that many characters from the end of the input (or if combined with +: before the current stdin file position).  Without  
              -s option, xxd starts at the current file position.  
  
  
       -u     use upper case hex letters. Default is lower case.  
  
  
       -v | -version  
              show version string.

举例说明：

比如有下面这个文件叫proces\_watch,如果记不住选项也没什么关系

1）、因为有些文件比较大，如果直接xxd ，那么刷屏刷的你也看不到你想要的，可以结合一下more命令进行查看

即

xxd 输入文件  |  more

这个时候，就可以一屏一屏的查看！！！

2）、命令选项 -l，可以查看从文件起始查看多少个字节，例如查看前16个字节的内容

可以如下

xxd -l 长度 输入文件

root@user-virtual-machine:/tftpboot# xxd -l 16 process_watch
    
    0000000: 7f45 4c46 0101 0103 0400 0000 0000 0000 .ELF............

3）、如果，这种显示风格看着不舒服，可以使用 -g 选项，选择分组字节数，默认为2

root@user-virtual-machine:/tftpboot# xxd -g1 -l 16 process_watch

0000000: 7f 45 4c 46 01 01 01 03 04 00 00 00 00 00 00 00  .ELF............

4）、如果想把输入文件，定位成一个数组形式，那么选择 -i选项

root@user-virtual-machine:/tftpboot# xxd -i process_watch | more
    
    unsigned char process_watch[] = {
    
    0x7f, 0x45, 0x4c, 0x46, 0x01, 0x01, 0x01, 0x03, 0x04, 0x00, 0x00, 0x00,
    
    0x00, 0x00, 0x00, 0x00, 0x02, 0x00, 0x28, 0x00, 0x01, 0x00, 0x00, 0x00,
    
    0x20, 0xf6, 0x00, 0x00, 0x34, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    
    0x02, 0x00, 0x00, 0x04, 0x34, 0x00, 0x20, 0x00, 0x02, 0x00, 0x28, 0x00,
    
    0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    
    0x00, 0x80, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0x7f, 0x7e, 0x00, 0x00,
    
    0x7f, 0x7e, 0x00, 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00,
    
    0x01, 0x00, 0x00, 0x00, 0x60, 0x2e, 0x00, 0x00, 0x60, 0x2e, 0x02, 0x00,
    
    0x60, 0x2e, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
    
    0x06, 0x00, 0x00, 0x00, 0x00, 0x80, 0x00, 0x00, 0xf2, 0xa0, 0xad, 0xd4,
    
    0x55, 0x50, 0x58, 0x21, 0x7c, 0x08, 0x0d, 0x17, 0x00, 0x00, 0x00, 0x00,
    
    0x40, 0x87, 0x01, 0x00, 0x40, 0x87, 0x01, 0x00, 0x34, 0x01, 0x00, 0x00,
    
    0x92, 0x00, 0x00, 0x00, 0x03, 0x00, 0x00, 0x00, 0xf9, 0x7f, 0x45, 0x4c,
    
    0x46, 0x01, 0x64, 0x00, 0x3f, 0x02, 0x00, 0x28, 0x00, 0x7e, 0x0d, 0xbc,

5）、如果想从文件某个偏移量开始显示数据，需要用的-s选项，即s=seek

root@user-virtual-machine:/tftpboot# xxd -g1 -s 16 -l 16 process_watch
    
    0000010: 02 00 28 00 01 00 00 00 20 f6 00 00 34 00 00 00 ..(..... ...4...