Linux 虚拟网络基础---namespace、veth pair、bridge 说明和命令实操

淡淡的烟草味﹌ 2022-05-15 10:59 233阅读 0赞

# namespace #

## 前言 ##

namespace是Linux虚拟网络的一个重要概念，传统的Linux的许多资源是全局的，如果进程id资源。而namespace的目的首先就是讲这些资源做资源隔离。Linux可以在一个Host内创建许多namespace，于是那些原本是linux的全局资源，就变成了namespace范围内的“全局”资源，而且不同namespace的资源相互不可见，彼此透明。

Linux namespace 可以隔离的资源有：uts\_ns（内存、版本等底层信息）、ipc\_ns（所有与进程通信的信息）、 mnt\_ns（当前装载的文件系统）、 pid\_ns（有关进程id的信息）、 user\_ns（资源配额的信息）、 net\_ns（网络信息）。

一个设备（Linux Device）只能位于一个namespace中，不同namespace中的设备可以利用veth pair进行桥接。

## 命令实操 ##

Linux 操作namespace的命令是ip netns。

[root@virtual ~]# ip netns help
    Usage: ip netns list
           ip netns add NAME
           ip netns set NAME NETNSID
           ip [-all] netns delete [NAME]
           ip netns identify [PID]
           ip netns pids NAME
           ip [-all] netns exec [NAME] cmd ...
           ip netns monitor
           ip netns list-id
    [root@virtual ~]#

首先创建一个namespace：

# 查看namespace列表
    [root@virtual ~]# ip netns list 
    [root@virtual ~]# 
    # 新增 namespace ns_test
    [root@virtual ~]# ip netns add ns_test
    [root@virtual ~]# 
    [root@virtual ~]# ip netns list
    ns_test
    [root@virtual ~]#

当创建一个namespace后，就可以将一些虚拟设备迁移到这个namespace中去了，比如上一篇中介绍的tap。

# 创建tap，并配置对应IP，详细信息可看上一篇文档
    [root@virtual ~]# tunctl -t tap_test
    Set 'tap_test' persistent and owned by uid 0
    [root@virtual ~]# ip link list
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
        link/ether fa:16:3e:56:6a:87 brd ff:ff:ff:ff:ff:ff
    3: tap_test: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT qlen 1000
        link/ether 2e:5c:3f:10:63:12 brd ff:ff:ff:ff:ff:ff
    [root@virtual ~]# ip addr show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
        link/ether fa:16:3e:56:6a:87 brd ff:ff:ff:ff:ff:ff
        inet 10.0.0.176/24 brd 10.0.0.255 scope global noprefixroute dynamic eth0
           valid_lft 75898sec preferred_lft 75898sec
        inet6 fe80::f816:3eff:fe56:6a87/64 scope link 
           valid_lft forever preferred_lft forever
    3: tap_test: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
        link/ether 2e:5c:3f:10:63:12 brd ff:ff:ff:ff:ff:ff
    [root@virtual ~]# ip addr add local 10.0.0.190/24 dev tap_test
    [root@virtual ~]# ip a show
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
        link/ether fa:16:3e:56:6a:87 brd ff:ff:ff:ff:ff:ff
        inet 10.0.0.176/24 brd 10.0.0.255 scope global noprefixroute dynamic eth0
           valid_lft 75813sec preferred_lft 75813sec
        inet6 fe80::f816:3eff:fe56:6a87/64 scope link 
           valid_lft forever preferred_lft forever
    3: tap_test: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
        link/ether 2e:5c:3f:10:63:12 brd ff:ff:ff:ff:ff:ff
        inet 10.0.0.190/24 scope global tap_test
           valid_lft forever preferred_lft forever
    [root@virtual ~]#
    # 创建namespace后，将前面创建的tap_test迁移到这个namespace中。
    # 迁移之后，在外直接 ip a s 已经看不到这个虚拟设备了
    [root@virtual ~]# 
    [root@virtual ~]# ip link set tap_test netns ns_test
    [root@virtual ~]# 
    [root@virtual ~]# ip netns exec ns_test ip a s
    1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    3: tap_test: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
        link/ether 2e:5c:3f:10:63:12 brd ff:ff:ff:ff:ff:ff
    [root@virtual ~]# ip netns exec ns_test ip addr add 192.168.10.190/24 dev tap_test
    [root@virtual ~]# ip netns exec ns_test ip a s
    1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    3: tap_test: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
        link/ether 2e:5c:3f:10:63:12 brd ff:ff:ff:ff:ff:ff
        inet 192.168.10.190/24 scope global tap_test
           valid_lft forever preferred_lft forever
    [root@virtual ~]#

# veth pair #

## 前言 ##

veth pair 不是一个设备，而是一对设备，以连接两个虚拟以太端口。操作veth pair，需要跟namespace一起配合，不然就没有意义。

简单的拓扑图：  
![70][]

两个namespace ns1/ns2 中各有一个tap组成veth pair，两个tap 上配置的ip进行互ping。

## 命令实操 ##

# 创建 veth pair
    [root@virtual ~]# ip link add tap1 type veth peer name tap2 
    [root@virtual ~]# ip a s
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
        inet 127.0.0.1/8 scope host lo
           valid_lft forever preferred_lft forever
        inet6 ::1/128 scope host 
           valid_lft forever preferred_lft forever
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000
        link/ether fa:16:3e:56:6a:87 brd ff:ff:ff:ff:ff:ff
        inet 10.0.0.176/24 brd 10.0.0.255 scope global noprefixroute dynamic eth0
           valid_lft 64021sec preferred_lft 64021sec
        inet6 fe80::f816:3eff:fe56:6a87/64 scope link 
           valid_lft forever preferred_lft forever
    6: tap2@tap1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN qlen 1000
        link/ether a6:74:e9:cb:8f:f1 brd ff:ff:ff:ff:ff:ff
    7: tap1@tap2: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN qlen 1000
        link/ether 02:d1:8c:8b:44:e9 brd ff:ff:ff:ff:ff:ff
    [root@virtual ~]# 
    
    # 创建namespace，并将tap迁移至namespace中：
    
    [root@virtual ~]# ip netns add ns1
    [root@virtual ~]# ip netns add ns2
    [root@virtual ~]# ip link set tap1 netns ns1
    [root@virtual ~]# ip link set tap2 netns ns2
    [root@virtual ~]# ip netns exec ns1 ip addr add local 192.168.10.200/24 dev tap1
    [root@virtual ~]# ip netns exec ns2 ip addr add local 192.168.10.201/24 dev tap2
    [root@virtual ~]# ip netns exec ns1 ifconfig tap1 up
    [root@virtual ~]# ip netns exec ns2 ifconfig tap2 up
    [root@virtual ~]# 
    [root@virtual ~]# ip link list
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP mode DEFAULT qlen 1000
        link/ether fa:16:3e:56:6a:87 brd ff:ff:ff:ff:ff:ff
    [root@virtual ~]# ip netns list
    ns2
    ns1 (id: 0)
    ns_test
    [root@virtual ~]# 
    [root@virtual ~]# ip netns exec ns1 ping 192.168.10.201
    PING 192.168.10.201 (192.168.10.201) 56(84) bytes of data.
    64 bytes from 192.168.10.201: icmp_seq=1 ttl=64 time=0.028 ms
    64 bytes from 192.168.10.201: icmp_seq=2 ttl=64 time=0.027 ms
    64 bytes from 192.168.10.201: icmp_seq=3 ttl=64 time=0.026 ms
    64 bytes from 192.168.10.201: icmp_seq=4 ttl=64 time=0.023 ms
    ^C
    --- 192.168.10.201 ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 2999ms
    rtt min/avg/max/mdev = 0.023/0.026/0.028/0.002 ms
    [root@virtual ~]# ip netns exec ns1 ip a
    1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    7: tap1@if6: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
        link/ether 02:d1:8c:8b:44:e9 brd ff:ff:ff:ff:ff:ff link-netnsid 1
        inet 192.168.10.200/24 scope global tap1
           valid_lft forever preferred_lft forever
        inet6 fe80::d1:8cff:fe8b:44e9/64 scope link 
           valid_lft forever preferred_lft forever
    [root@virtual ~]# ip netns exec ns2 ip a s
    1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN qlen 1
        link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    6: tap2@if7: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP qlen 1000
        link/ether a6:74:e9:cb:8f:f1 brd ff:ff:ff:ff:ff:ff link-netnsid 0
        inet 192.168.10.201/24 scope global tap2
           valid_lft forever preferred_lft forever
        inet6 fe80::a474:e9ff:fecb:8ff1/64 scope link 
           valid_lft forever preferred_lft forever
    [root@virtual ~]#

通过以上的测试用例，可以了解通过veth pair连接两个namespace的方法。

后面会有依靠Bridge/Switch 实现三个或多个namespace进行互通。

# Bridge #

## 前言 ##

在Linux的语境中，Bridge和Switch是一个概念。Bridge是一个虚拟网络设备，所以具有网络设备的特征，可以配置IP、MAC地址等；Bridge是一个虚拟交换机，和物理交换机有类似的功能。对于普通的网络设备来说，只有两端，从一端进来的数据会从另一端出去，如物理网卡从外面网络中收到的数据会转发给内核协议栈，而从协议栈过来的数据会转发到外面的物理网络中。 而Bridge不同，Bridge有多个端口，数据可以从任何端口进来，进来之后从哪个口出去和物理交换机的原理差不多，要看mac地址。

## 命令实操 ##

Linux实现Bridge功能是brctl模块。可以直接在命令行上查看，如果没有回显的话，可直接使用yum进行安装。

[root@virtual ~]# brctl
    -bash: brctl: command not found
    [root@virtual ~]# yum -y install bridge-utils
    Loaded plugins: fastestmirror
    Loading mirror speeds from cached hostfile
    ......
    Running transaction
      Installing : bridge-utils-1.5-9.el7.x86_64                                                                                           1/1 
      Verifying  : bridge-utils-1.5-9.el7.x86_64                                                                                           1/1 
    
    Installed:
      bridge-utils.x86_64 0:1.5-9.el7                                                                                                          
    
    Complete!
    [root@virtual ~]# brctl
    Usage: brctl [commands]
    commands:
        addbr       <bridge>        add bridge
        delbr       <bridge>        delete bridge
        addif       <bridge> <device>   add interface to bridge
        delif       <bridge> <device>   delete interface from bridge
        hairpin     <bridge> <port> {
       on|off}    turn hairpin on/off
        setageing   <bridge> <time>     set ageing time
        setbridgeprio   <bridge> <prio>     set bridge priority
        setfd       <bridge> <time>     set bridge forward delay
        sethello    <bridge> <time>     set hello time
        setmaxage   <bridge> <time>     set max message age
        setpathcost <bridge> <port> <cost>  set path cost
        setportprio <bridge> <port> <prio>  set port priority
        show        [ <bridge> ]        show a list of bridges
        showmacs    <bridge>        show a list of mac addrs
        showstp     <bridge>        show bridge stp info
        stp         <bridge> {
       on|off}   turn stp on/off
    [root@virtual ~]#

根据如下拓扑图，我们模拟创建相应的虚拟网络设备，进行实现：

拓扑图：  
![70 1][]

命令操作：

# 创建对于设备
    [root@virtual ~]# ip link add tap1 type veth peer name tap1_peer
    [root@virtual ~]# ip link add tap2 type veth peer name tap2_peer
    [root@virtual ~]# ip link add tap3 type veth peer name tap3_peer
    [root@virtual ~]# ip link add tap4 type veth peer name tap4_peer
    [root@virtual ~]# 
    [root@virtual ~]# ip a s | grep tap
    8: tap1_peer@tap1: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN qlen 1000
    9: tap1@tap1_peer: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN qlen 1000
    10: tap2_peer@tap2: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN qlen 1000
    11: tap2@tap2_peer: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN qlen 1000
    12: tap3_peer@tap3: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN qlen 1000
    13: tap3@tap3_peer: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN qlen 1000
    14: tap4_peer@tap4: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN qlen 1000
    15: tap4@tap4_peer: <BROADCAST,MULTICAST,M-DOWN> mtu 1500 qdisc noop state DOWN qlen 1000
    [root@virtual ~]# 
    [root@virtual ~]# ip netns list
    ns_test
    [root@virtual ~]# ip netns add ns1
    [root@virtual ~]# ip netns add ns2
    [root@virtual ~]# ip netns add ns3
    [root@virtual ~]# ip netns add ns4
    [root@virtual ~]# ip netns list
    ns4
    ns3
    ns2
    ns1
    ns_test
    [root@virtual ~]# 
    # 将设备迁移至namespace
    [root@virtual ~]# ip link set tap1 netns ns1
    [root@virtual ~]# ip link set tap2 netns ns2
    [root@virtual ~]# ip link set tap3 netns ns3
    [root@virtual ~]# ip link set tap4 netns ns4
    [root@virtual ~]# 
    # 创建 Bridge
    [root@virtual ~]# brctl addbr br1
    [root@virtual ~]# ip a s | grep br1
    17: br1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
    [root@virtual ~]# 
    # 将tap 添加到 Bridge中
    [root@virtual ~]# brctl addif br1 tap1_peer
    [root@virtual ~]# brctl addif br1 tap2_peer
    [root@virtual ~]# brctl addif br1 tap3_beer
    interface tap3_beer does not exist!
    [root@virtual ~]# brctl addif br1 tap3_peer
    [root@virtual ~]# brctl addif br1 tap4_peer
    [root@virtual ~]# 
    # 配置 tap 对应的ip地址
    [root@virtual ~]# ip netns exec ns1 ip addr add local 192.168.10.200/24 dev tap1
    [root@virtual ~]# ip netns exec ns2 ip addr add local 192.168.10.201/24 dev tap2
    [root@virtual ~]# ip netns exec ns3 ip addr add local 192.168.10.202/24 dev tap3
    [root@virtual ~]# ip netns exec ns4 ip addr add local 192.168.10.203/24 dev tap4
    [root@virtual ~]# 
    # 将 Bridge 以及所有 tap 状态设置为 up
    [root@virtual ~]# ip link set br1 up
    [root@virtual ~]# ip link set tap1_peer up
    [root@virtual ~]# ip link set tap2_peer up
    [root@virtual ~]# ip link set tap3_peer up
    [root@virtual ~]# ip link set tap4_peer up
    [root@virtual ~]# ip netns exec ns1 ip link set tap1 up
    [root@virtual ~]# ip netns exec ns2 ip link set tap2 up
    [root@virtual ~]# ip netns exec ns3 ip link set tap3 up
    [root@virtual ~]# ip netns exec ns4 ip link set tap4 up
    [root@virtual ~]# 
    # 相互进行ip 互ping ，验证网络连通
    [root@virtual ~]# ip netns exec ns1 ping 192.168.10.201
    PING 192.168.10.201 (192.168.10.201) 56(84) bytes of data.
    64 bytes from 192.168.10.201: icmp_seq=1 ttl=64 time=0.041 ms
    64 bytes from 192.168.10.201: icmp_seq=2 ttl=64 time=0.032 ms
    64 bytes from 192.168.10.201: icmp_seq=3 ttl=64 time=0.031 ms
    64 bytes from 192.168.10.201: icmp_seq=4 ttl=64 time=0.027 ms
    ^C
    --- 192.168.10.201 ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 2999ms
    rtt min/avg/max/mdev = 0.027/0.032/0.041/0.008 ms
    [root@virtual ~]# ip netns exec ns1 ping 192.168.10.202
    PING 192.168.10.202 (192.168.10.202) 56(84) bytes of data.
    64 bytes from 192.168.10.202: icmp_seq=1 ttl=64 time=0.041 ms
    64 bytes from 192.168.10.202: icmp_seq=2 ttl=64 time=0.033 ms
    64 bytes from 192.168.10.202: icmp_seq=3 ttl=64 time=0.037 ms
    64 bytes from 192.168.10.202: icmp_seq=4 ttl=64 time=0.027 ms
    ^C
    --- 192.168.10.202 ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 2999ms
    rtt min/avg/max/mdev = 0.027/0.034/0.041/0.007 ms
    [root@virtual ~]# ip netns exec ns1 ping 192.168.10.203
    PING 192.168.10.203 (192.168.10.203) 56(84) bytes of data.
    64 bytes from 192.168.10.203: icmp_seq=1 ttl=64 time=0.059 ms
    64 bytes from 192.168.10.203: icmp_seq=2 ttl=64 time=0.027 ms
    64 bytes from 192.168.10.203: icmp_seq=3 ttl=64 time=0.033 ms
    64 bytes from 192.168.10.203: icmp_seq=4 ttl=64 time=0.031 ms
    ^C
    --- 192.168.10.203 ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 2999ms
    rtt min/avg/max/mdev = 0.027/0.037/0.059/0.014 ms
    [root@virtual ~]# 
    [root@virtual ~]# ip netns exec ns4 ping 192.168.10.200
    PING 192.168.10.200 (192.168.10.200) 56(84) bytes of data.
    64 bytes from 192.168.10.200: icmp_seq=1 ttl=64 time=0.022 ms
    64 bytes from 192.168.10.200: icmp_seq=2 ttl=64 time=0.024 ms
    64 bytes from 192.168.10.200: icmp_seq=3 ttl=64 time=0.033 ms
    64 bytes from 192.168.10.200: icmp_seq=4 ttl=64 time=0.030 ms
    ^X^C
    --- 192.168.10.200 ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 2999ms
    rtt min/avg/max/mdev = 0.022/0.027/0.033/0.005 ms
    [root@virtual ~]#

[70]: /images/20220515/c397586535ab46c2b69bc1190722ce6b.png
[70 1]: /images/20220515/0ef4979e53ba4ce180af150487d3bebb.png