keras 深度学习之迁移学习和fine tune

爱被打了一巴掌 2022-05-15 10:19 458阅读 0赞

一.迁移学习  
就是说把别人训练好的网络(比如说卷积特征提取部分)拿过来配合上自己分类器，这样可以增加训练的速度和提高分类效果。

''' Created on 2018年8月28日 '''
    #迁移学习
    import keras
    from keras.models import Model
    from keras.applications import ResNet50
    import numpy as np
    from keras.preprocessing.image import ImageDataGenerator
     
     
    train_data_dir = "data/train"
    valid_data_dir = "data/valid"
    img_width, img_height = 224,224
    batch_size = 32
    train_samples_nums = 14000
    valid_samples_nums = 1400
     
    #迁移学习使用的是ResNet,只需要ResNet的特征提取部分
    model = ResNet50(weights="model/resnet50_weights_tf_dim_ordering_tf_kernels_notop.h5", include_top=False)
    datagen = ImageDataGenerator(rescale=1. / 255)
     
    #分别定义train，valid的数据生成器
    train_generator = datagen.flow_from_directory(
        train_data_dir,
        target_size=(img_width, img_height),
        batch_size=batch_size,
        class_mode=None, #None就不会输出y
        shuffle=False)
    valid_generator = datagen.flow_from_directory(
        valid_data_dir,
        target_size=(img_width, img_height),
        batch_size=batch_size,
        class_mode=None,
        shuffle=False)
     
    #使用ResNet提取特征，生成新的特征，保存成np格式
    bottleneck_train_features = model.predict_generator(train_generator, train_samples_nums // batch_size)
    np.save(open('train_features.npy', 'wb'),bottleneck_train_features)
    bottleneck_valid_features = model.predict_generator(valid_generator, valid_samples_nums // batch_size)
    np.save(open('valid_features.npy', 'wb'), bottleneck_valid_features)
     
    #重新读取数据，定义标签
    train_data = np.load(open('bottleneck_features_train.npy', 'rb'))
    train_labels = np.array([0] * (train_samples_nums // 2) + [1] * (train_samples_nums // 2))
    valid_data = np.load(open('bottleneck_features_validation.npy', 'rb'))
    valid_labels = np.array([0] * (valid_samples_nums // 2) + [1] * (valid_samples_nums // 2))
    #以上就是通过迁移学习提取特征，下面可以使用分类器，对这些特征进行分类.
    # 分类器可以是SVM,MLP,CNN,RNN,RF,XGBOOST,lightGBM
    # 比如:使用SVM
    from sklearn.svm import SVC
    clf = SVC()
    clf.set_params(kernel="linear",probability=True).fit(train_data, train_labels)

二.fine tune(微调)  
一般在迁移学习的时候时候。也就是在将别人的训练好的网络拿过来，然后加上自己分类层(一般使用的是加上自己的卷积层+全连接层，或者直接全连接层)，其中别人的网络可以设置为全部可训练，也可以设置部分可训练，最后学习率可以调低一点，一般取0.0001-0.001。

''' Created on 2018年8月28日 '''
    #fine tune
    #首先需要自己写个ResNet,这些代码都可以在from keras.applications import ResNet50中拷贝
    from keras.layers import Input, Add, Dense, Activation, Flatten, Conv2D, BatchNormalization,MaxPooling2D,Concatenate,Lambda,AveragePooling2D
    from keras import backend as K
    from keras import layers
    from keras.models import Model
    from keras.optimizers import SGD
    
    #定义resnet的残差模块
    def identity_block(input_tensor, kernel_size, filters, stage, block):
    
        filters1, filters2, filters3 = filters
        if K.image_data_format() == 'channels_last':
            bn_axis = 3
        else:
            bn_axis = 1
        conv_name_base = 'res' + str(stage) + block + '_branch'
        bn_name_base = 'bn' + str(stage) + block + '_branch'
    
        x = Conv2D(filters1, (1, 1), name=conv_name_base + '2a')(input_tensor)
        x = BatchNormalization(axis=bn_axis, name=bn_name_base + '2a')(x)
        x = Activation('relu')(x)
    
        x = Conv2D(filters2, kernel_size,
                   padding='same', name=conv_name_base + '2b')(x)
        x = BatchNormalization(axis=bn_axis, name=bn_name_base + '2b')(x)
        x = Activation('relu')(x)
    
        x = Conv2D(filters3, (1, 1), name=conv_name_base + '2c')(x)
        x = BatchNormalization(axis=bn_axis, name=bn_name_base + '2c')(x)
    
        x = layers.add([x, input_tensor])
        x = Activation('relu')(x)
        return x
    
    
    def conv_block(input_tensor, kernel_size, filters, stage, block, strides=(2, 2)):
        
        filters1, filters2, filters3 = filters
        if K.image_data_format() == 'channels_last':
            bn_axis = 3
        else:
            bn_axis = 1
        conv_name_base = 'res' + str(stage) + block + '_branch'
        bn_name_base = 'bn' + str(stage) + block + '_branch'
    
        x = Conv2D(filters1, (1, 1), strides=strides,
                   name=conv_name_base + '2a')(input_tensor)
        x = BatchNormalization(axis=bn_axis, name=bn_name_base + '2a')(x)
        x = Activation('relu')(x)
    
        x = Conv2D(filters2, kernel_size, padding='same',
                   name=conv_name_base + '2b')(x)
        x = BatchNormalization(axis=bn_axis, name=bn_name_base + '2b')(x)
        x = Activation('relu')(x)
    
        x = Conv2D(filters3, (1, 1), name=conv_name_base + '2c')(x)
        x = BatchNormalization(axis=bn_axis, name=bn_name_base + '2c')(x)
    
        shortcut = Conv2D(filters3, (1, 1), strides=strides,
                          name=conv_name_base + '1')(input_tensor)
        shortcut = BatchNormalization(axis=bn_axis, name=bn_name_base + '1')(shortcut)
    
        x = layers.add([x, shortcut])
        x = Activation('relu')(x)
        return x
    
    def MyResNet():
        if K.image_data_format() == 'channels_last':
            bn_axis = 3
        else:
            bn_axis = 1
        input_shape_img = (224, 224, 3)
        
        img_input = Input(shape=input_shape_img)
        
        x = Conv2D(
            64, (7, 7), strides=(2, 2), padding='same', name='conv1')(img_input)
        x = BatchNormalization(axis=bn_axis, name='bn_conv1')(x)
        x = Activation('relu')(x)
        x = MaxPooling2D((3, 3), strides=(2, 2))(x)
    
        x = conv_block(x, 3, [64, 64, 256], stage=2, block='a', strides=(1, 1))
        x = identity_block(x, 3, [64, 64, 256], stage=2, block='b')
        x = identity_block(x, 3, [64, 64, 256], stage=2, block='c')
    
        x = conv_block(x, 3, [128, 128, 512], stage=3, block='a')
        x = identity_block(x, 3, [128, 128, 512], stage=3, block='b')
        x = identity_block(x, 3, [128, 128, 512], stage=3, block='c')
        x = identity_block(x, 3, [128, 128, 512], stage=3, block='d')
    
        x = conv_block(x, 3, [256, 256, 1024], stage=4, block='a')
        x = identity_block(x, 3, [256, 256, 1024], stage=4, block='b')
        x = identity_block(x, 3, [256, 256, 1024], stage=4, block='c')
        x = identity_block(x, 3, [256, 256, 1024], stage=4, block='d')
        x = identity_block(x, 3, [256, 256, 1024], stage=4, block='e')
        x = identity_block(x, 3, [256, 256, 1024], stage=4, block='f')
    
        x = conv_block(x, 3, [512, 512, 2048], stage=5, block='a')
        x = identity_block(x, 3, [512, 512, 2048], stage=5, block='b')
        x = identity_block(x, 3, [512, 512, 2048], stage=5, block='c')
        
        #加入自己的全连接层分类器，就行了
        x = Flatten()(x)
        x = Dense(2, activation='softmax', name='fc2')(x)
        
        
        model = Model(img_input, x, name='mymodel')
        return model
    
    model = MyResNet()
    model.summary()
    #加载权重
    resnet_weight = "model/resnet50_weights_tf_dim_ordering_tf_kernels_notop.h5"
    model.load_weights(resnet_weight, by_name=True)
    #也可以指定哪一层可以进行训练
    for layer in model.layers[:10]:
        layer.trainable = False
    #编译模型,然后一般fine tune都使用比较低的学习率
    sgd = SGD(lr=0.0001, decay=0.00002, momentum=0.9, nesterov=True)
    model.compile(optimizer=sgd, loss='categorical_crossentropy', metrics=['accuracy'])