Linux strace使用

男娘i 2022-05-12 15:46 158阅读 0赞

## 1、简介 ##

strace是Linux环境下的一款程序调试工具，用来监察一个应用程序所使用的系统呼叫及它所接收的系统信息。

Strace是一个基础的调试工具，strace常用来跟踪进程执行时的系统调用和所接收的信号。 在Linux世界，进程不能直接访问硬件设备，当进程需要访问硬件设备(比如读取磁盘文件，接收网络数据等等)时，必须由用户态模式切换至内核态模式，通过系统调用访问硬件设备。strace可以跟踪到一个进程产生的系统调用,包括参数，返回值，执行消耗的时间。

## 2、下载 ##

下载地址：[http://sourceforge.net/projects/strace/][http_sourceforge.net_projects_strace]

\[oracle@xml-ora1 ~\]$ wgethttp://nchc.dl.sourceforge.net/project/strace/strace/4.7/strace-4.7.tar.xz

## 3、解压安装 ##

这种文件是使用tar打包后再压缩生成的。解压方法是：

1、xz -d \*\*.tar.xz

2、tar -xvf \*\*.tar

如没有按照xz工具，则首先需要下载、安装xz工具：[http://tukaani.org/xz/][http_tukaani.org_xz]

\[oracle@xml-ora1 ~\]$ wget http://tukaani.org/xz/xz-5.0.4.tar.gz

\[oracle@xml-ora1 ~\]$ tar -zxvf xz-5.0.4.tar.gz

\[oracle@xml-ora1 ~\]$ cd xz-5.0.4

\[oracle@xml-ora1 xz-5.0.4\]$ ./configure

\[oracle@xml-ora1 xz-5.0.4\]$ make

\[oracle@xml-ora1 xz-5.0.4\]$ sudo make install

\[oracle@xml-ora1 ~\]$ xz --help

Usage: xz \[OPTION\]... \[FILE\]...

Compress or decompress FILEs in the .xzformat.

-z,--compress      force compression

**-d, --decompress    force decompression**

-t,--test          test compressed fileintegrity

-l,--list          list information about.xz files

-k,--keep          keep (don't delete) inputfiles

-f,--force         force overwrite of outputfile and (de)compress links

-c,--stdout        write to standard outputand don't delete input files

-0... -9           compression preset;default is 6; take compressor \*and\*

decompressor memory usageinto account before using 7-9!

-e,--extreme       try to improvecompression ratio by using more CPU time;

does not affectdecompressor memory requirements

-q,--quiet         suppress warnings;specify twice to suppress errors too

-v,--verbose       be verbose; specify twicefor even more verbose

-h,--help          display this short helpand exit

-H,--long-help     display the long help(lists also the advanced options)

-V,--version       display the versionnumber and exit

With no FILE, or when FILE is -, readstandard input.

Report bugs to<lasse.collin@tukaani.org> (in English or Finnish).

XZ Utils home page:<http://tukaani.org/xz/>

\[oracle@xml-ora1 ~\]$ xz -d strace-4.7.tar.xz

\[oracle@xml-ora1 ~\]$ ls

strace-4.7.tar

\[oracle@xml-ora1 ~\]$ tar -xvf strace-4.7.tar

\[oracle@xml-ora1 strace-4.7\]$ ./configure

\[oracle@xml-ora1 strace-4.7\]$ make

\[oracle@xml-ora1 strace-4.7\]$ sudo make install

## 4、命令说明 ##

\[oracle@xml-ora1 strace-4.7\]$ strace --help

strace: invalid option -- -

usage: strace \[-CdffhiqrtttTvVxxy\] \[-I n\] \[-eexpr\]...

\[-a column\] \[-o file\] \[-sstrsize\] \[-P path\]...

-p pid... / \[-D\] \[-E var=val\]...\[-u username\] PROG \[ARGS\]

or: strace -c\[df\] \[-I n\] \[-e expr\]... \[-O overhead\] \[-S sortby\]

-p pid... / \[-D\] \[-E var=val\]...\[-u username\] PROG \[ARGS\]

\-c -- count time, calls, and errors foreach syscall and report summary统计每一系统调用的所执行的时间,次数和出错的次数等.

\-C -- like -c but also print regular output和-c参数意义，但是输出更多信息

\-d -- enable debug output to stderr   输出strace关于标准错误的调试信息.

\-D -- run tracer process as a detachedgrandchild, not as parent

\-f -- follow forks, -ff -- with output intoseparate files   告诉strace同时跟踪fork出来的进程

\-F -- attempt to follow vforks (deprecated,use -f)  告诉strace同时跟踪vfork出来的进程

\-i -- print instruction pointer at time ofsyscall     输出系统调用的入口指针.

\-q -- suppress messages about attaching,detaching, etc.   禁止输出关于脱离的消息

\-r -- print relative timestamp, -t --absolute timestamp, -tt -- with usecs  打印出时间，tt表示微妙

\-T -- print time spent in each syscall  打印出每个系统调用的耗费时间

\-v -- verbose mode: print unabbreviatedargv, stat, termios, etc. args输出strace的版本信息

\-x -- print non-ascii strings in hex, -xx-- print all strings in hex以十六进制形式输出非标准字符串

\-y -- print paths associated with filedescriptor arguments

\-h -- print help message, -V -- printversion输出简要的帮助信息.

\-a column -- alignment COLUMN for printingsyscall results (default 40)设置结果的输出默认位置40

\-e expr -- a qualifying expression:  指定一个表达式,用来控制如何跟踪.格式如下

option=\[!\]all or option=\[!\]val1\[,val2\]...

options: trace, abbrev, verbose, raw, signal, read, or write

\-e trace=set

只跟踪指定的系统调用.例如:-e trace=open,close,rean,write表示只跟踪这四个系统调用.默认的为set=all

\-e trace=file

只跟踪有关文件操作的系统调用.

\-e trace=process

只跟踪有关进程控制的系统调用.

\-e trace=network

跟踪与网络有关的所有系统调用.

\-estrace=signal

跟踪所有与系统信号有关的系统调用

\-e trace=ipc

跟踪所有与进程通讯有关的系统调用

\-eabbrev=set

设定 strace输出的系统调用的结果集.-v 等与 abbrev=none.默认为abbrev=all.

\-e raw=set

将指 定的系统调用的参数以十六进制显示.

\-esignal=set

指定跟踪的系统信号.默认为all.如signal=!SIGIO(或者signal=!io),表示不跟踪SIGIO信号.

\-e read=set

输出从指定文件中读出的数据.例如:

\-e read=3,5

\-e write=set

输出写入到指定文件中的数据.

\-I interruptible --

1:no signals are blocked

2:fatal signals are blocked while decoding syscall (default)

3:fatal signals are always blocked (default if '-o FILE PROG')

4:fatal signals and SIGTSTP (^Z) are always blocked

(useful to make 'strace -o FILE PROG' not stop on ^Z)

\-o file -- send trace output to FILEinstead of stderr  将strace的输出写入文件filename

\-O overhead -- set overhead for tracingsyscalls to OVERHEAD usecs

\-p pid -- trace process with process idPID, may be repeated跟踪指定的进程pid.

\-s strsize -- limit length of print stringsto STRSIZE chars (default 32)  指定输出的字符串的最大长度.默认为32.文件名一直全部输出

\-S sortby -- sort syscall counts by: time,calls, name, nothing (default time)

\-u username -- run command as usernamehandling setuid and/or setgid以username 的UID和GID执行被跟踪的命令

\-E var=val -- put var=val in theenvironment for command输出变量值

\-E var -- remove var from the environmentfor command

\-P path -- trace accesses to path

## 5、实例使用 ##

### 5.1 一个简单的跟踪 ###

有个文件a.txt，我们跟踪下cat文件的系统调用过程：

\[oracle@xml-ora1 ~\]$ cat a.txt

hello welcome!

12344

\[oracle@xml-ora1 ~\]$ strace -o cat.log cat a.txt

hello welcome!

12344

\[oracle@xml-ora1 ~\]$ cat cat.log

execve("/bin/cat",\["cat", "a.txt"\], \[/\* 30 vars \*/\]) = 0

open("/lib/libc.so.6",O\_RDONLY)        = 3

open("/etc/ld.so.cache",O\_RDONLY)      = 3

open("/lib64/libc.so.6",O\_RDONLY)      = 3

open("a.txt", O\_RDONLY)                 = 3

fstat(3, \{st\_mode=S\_IFREG|0644, st\_size=21,...\}) = 0

read(3, "hellowelcome!\\n12344\\n", 4096) = 21

write(1, "hellowelcome!\\n12344\\n", 21) = 21

read(3, "", 4096)                       = 0

close(3)                                = 0

close(1)                                = 0

exit\_group(0)                           = ?

\+++ exited with 0 +++

跟踪文件cat.log里一大堆的东西，前面大部分都是在读取系统环境信息以及库文件，最后才是cat调用系统的信息。同时可以看到一个现象，只有是Open=3的，则说明加载库文件成功，而=-1的加载失败。

### 5.2 oracle sqlplus跟踪 ###

\[oracle@xml-ora1 ~\]$ strace -o sqlplus-trace.txtsqlplus / as sysdba

SQL\*Plus: Release 10.2.0.4.0 - Productionon Wed Dec 19 15:32:39 2012

Connected to:

Oracle Database 10g Enterprise EditionRelease 10.2.0.4.0 - 64bit Production

With the Partitioning, OLAP, Data Miningand Real Application Testing options

SQL> exit

\[oracle@xml-ora1 ~\]$ cat sqlplus-trace.txt | more

加载执行的程序路径，环境变量，系统库信息

execve("/u01/app/oracle/product/10.2/db\_1/bin/sqlplus",\["sqlplus", "/", "as", "sysdba"\], \[/\*30 vars \*/\]) = 0

brk(0)                                  = 0xe747000

mmap(NULL, 4096, PROT\_READ|PROT\_WRITE,MAP\_PRIVATE|MAP\_ANONYMOUS, -1, 0) = 0x2ae1dec57000

uname(\{sys="Linux",node="xml-ora1", ...\}) = 0

open("/u01/app/oracle/product/10.2/db\_1/lib/libsqlplus.so",O\_RDONLY) = 3

open("/u01/app/oracle/product/10.2/db\_1/lib/libclntsh.so.10.1",O\_RDONLY) = 3

open("/u01/app/oracle/product/10.2/db\_1/lib/libnnz10.so",O\_RDONLY) = 3

open("/lib/libdl.so.2",O\_RDONLY)       = 3

open("/etc/ld.so.cache",O\_RDONLY)      = 3

open("/lib64/libdl.so.2",O\_RDONLY)     = 3

open("/lib/libm.so.6",O\_RDONLY)        = 3

open("/lib64/libm.so.6",O\_RDONLY)      = 3

open("/lib/libpthread.so.0", O\_RDONLY)  = 3

open("/lib64/libpthread.so.0",O\_RDONLY) = 3

open("/lib/libnsl.so.1",O\_RDONLY)      = 3

open("/lib64/libnsl.so.1",O\_RDONLY)    = 3

open("/lib/libc.so.6",O\_RDONLY)        = 3

open("/lib64/libc.so.6",O\_RDONLY)      = 3

以下是加载oracle字符集文件

open("/u01/app/oracle/product/10.2/db\_1/nls/data/lx1boot.nlb",O\_RDONLY) = 3

open("/u01/app/oracle/product/10.2/db\_1/nls/data/lx00001.nlb",O\_RDONLY) = 3

open("/u01/app/oracle/product/10.2/db\_1/nls/data/lx20001.nlb",O\_RDONLY) = 3

open("/u01/app/oracle/product/10.2/db\_1/nls/data/lx10001.nlb",O\_RDONLY) = 3

open("/u01/app/oracle/product/10.2/db\_1/nls/data/lx31040.nlb",O\_RDONLY) = 3

open("/u01/app/oracle/product/10.2/db\_1/nls/data/lx40001.nlb",O\_RDONLY) = 3

以下加载sqlplus的一些文件，待研究，有些名字很清晰表达了组件的作用

open("/etc/hosts", O\_RDONLY)            = 8

open("/u01/app/oracle/product/10.2/db\_1/sqlplus/mesg/sp1us.msb",O\_RDONLY) = 3

open("/u01/app/oracle/product/10.2/db\_1/sqlplus/mesg/sp2us.msb",O\_RDONLY) = 4

open("/u01/app/oracle/product/10.2/db\_1/sqlplus/mesg/cpyus.msb",O\_RDONLY) = 5

open("/etc/localtime",O\_RDONLY)        = 6

open("/u01/app/oracle/product/10.2/db\_1/oracore/zoneinfo/timezlrg.dat",O\_RDONLY) = 6

输出交互信息到屏幕

write(1, "\\n", 1)                       = 1

write(1, "SQL\*Plus: Release 10.2.0.4.0- P"..., 70) = 70

write(1, "\\n", 1)                       = 1

初始化sqlplus

getcwd("/home/oracle", 256)             = 13

access("/u01/app/oracle/product/10.2/db\_1/network/admin/sqlnet.ora",F\_OK) = 0

open("/u01/app/oracle/product/10.2/db\_1/network/admin/sqlnet.ora",O\_RDONLY) = 7

open("/etc/passwd",O\_RDONLY)           = 7

open("/u01/app/oracle/product/10.2/db\_1/sqlplus/admin/glogin.sql",O\_RDONLY) = 8

write(1, "SQL> ", 5)

这个就是SQLPLUS初始化的过程，当然可以加上-f选项，此时看到的就是更详细的调用了。

[http_sourceforge.net_projects_strace]: http://sourceforge.net/projects/strace/
[http_tukaani.org_xz]: http://tukaani.org/xz/

Linux strace使用

发表评论取消回复

还没有评论，来说两句吧...

相关阅读

相关 Linux strace命令

相关 linux中的strace

相关 strace yii2 - 完整strace追踪

相关 Linux strace命令

相关 Linux strace命令

相关 Linux strace使用

相关 Linux strace命令

相关 linux strace命令简介

相关 Linux strace命令案例一

相关 Linux strace命令案例一