使用Lsiutil在线管理Dell R410 R610等内置阵列卡SAS 6i/R

﹏ヽ暗。殇╰゛Y 2022-03-17 10:39 415阅读 0赞

分享一下我老师大神的人工智能教程。零基础！通俗易懂！风趣幽默！还带黄段子！希望你也加入到我们人工智能的队伍中来！[https://blog.csdn.net/jiangjunshow][https_blog.csdn.net_jiangjunshow]

使用Lsiutil管理Dell SAS 6i/R  
Dell的好多型号(如R410,R610)[服务器][Link 1]默认的[RAID控制器][RAID]都是SAS 6i/R ，对于这款控制器MegaCli是不能使用的。在命令行模式下想管理SAS 6i/R，需要使用Lsiutil这个工具。

Lsiutil下载地址：[ftp://ftp.lsil.com/HostAdapterDrivers/linux/lsiutil/lsiutil.tar.gz][ftp_ftp.lsil.com_HostAdapterDrivers_linux_lsiutil_lsiutil.tar.gz]

Lsiutil有两种使用方法： 菜单驱动的交互使用 和 命令行

不带任何参数执行lsiutil，就会进入lsiutil的交互模式。在这个模式下，所有的操作都是通过文本菜单来进行的，举例如下：

\[root@Dell1950 ~\]\# lsiutil

LSI Logic MPT Configuration Utility, Version 1.56, March 19, 2008

1 MPT Port found

Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC  
1. /proc/mpt/ioc0 LSI Logic SAS1068E B3 105 00192f00 0

Select a device: \[1-1 or 0 to quit\] 1

1. Identify firmware, BIOS, and/or FCode  
2. Download firmware (update the FLASH)  
4. Download/erase BIOS and/or FCode (update the FLASH)  
8. Scan for devices  
10. Change IOC settings (interrupt coalescing)  
13. Change SAS IO Unit settings  
16. Display attached devices  
20. Diagnostics  
21. RAID actions  
22. Reset bus  
23. Reset target  
42. Display operating system names for devices  
45. Concatenate SAS firmware and NVDATA files  
60. Show non-default settings  
61. Restore default settings  
69. Show board manufacturing information  
97. Reset SAS link, HARD RESET  
98. Reset SAS link  
99. Reset port  
e Enable expert mode in menus  
p Enable paged mode  
w Enable logging

Main menu, select an option: \[1-99 or e/p/w or 0 to quit\] 21

1. Show volumes  
2. Show physical disks  
3. Get volume state  
4. Wait for volume resync to complete  
23. Replace physical disk  
26. Disable drive firmware update mode  
27. Enable drive firmware update mode  
30. Create volume  
31. Delete volume  
32. Change volume settings  
33. Change volume name  
50. Create hot spare  
99. Reset port  
e Enable expert mode in menus  
p Enable paged mode  
w Enable logging

RAID actions menu, select an option: \[1-99 or e/p/w or 0 to quit\] 1

1 volume is active, 2 physical disks are active

Volume 0 is Bus 0 Target 0, Type IM (Integrated Mirroring)  
Volume Name:  
Volume WWID: 0a09acf0a136af86  
Volume State: optimal, enabled  
Volume Settings: write caching disabled, auto configure, priority resync  
Volume draws from Hot Spare Pools: 0  
Volume Size 139392 MB, 2 Members  
Primary is PhysDisk 1 (Bus 0 Target 9)  
Secondary is PhysDisk 0 (Bus 0 Target 1)

RAID actions menu, select an option: \[1-99 or e/p/w or 0 to quit\] 0

Main menu, select an option: \[1-99 or e/p/w or 0 to quit\] 0

Port Name Chip Vendor/Type/Rev MPT Rev Firmware Rev IOC  
1. /proc/mpt/ioc0 LSI Logic SAS1068E B3 105 00192f00 0

Select a device: \[1-1 or 0 to quit\] 0  
命令行模式举例如下:

lsiutil –p1 –a 21,1,0,0,0 和上边菜单操作一样，只不过不用手动去选择菜单项了

lsiutil -p 1 -i –s 显示端口1的设置和连接的设备

lsiutil –s 显示所有端口上连接的设备

lsiutil -p 2 -l 1 强制HBA卡端口2连接速度为1Gb

[https_blog.csdn.net_jiangjunshow]: https://blog.csdn.net/jiangjunshow/article/details/77338485
[Link 1]: https://www.baidu.com/s?wd=%E6%9C%8D%E5%8A%A1%E5%99%A8&tn=24004469_oem_dg&rsv_dl=gh_pl_sl_csd
[RAID]: https://www.baidu.com/s?wd=RAID%E6%8E%A7%E5%88%B6%E5%99%A8&tn=24004469_oem_dg&rsv_dl=gh_pl_sl_csd
[ftp_ftp.lsil.com_HostAdapterDrivers_linux_lsiutil_lsiutil.tar.gz]: ftp://ftp.lsil.com/HostAdapterDrivers/linux/lsiutil/lsiutil.tar.gz