springboot全局配置参数

痛定思痛。 2022-02-19 08:36 435阅读 0赞

banner.charset=UTF-8 \# Banner file encoding.  
banner.location=classpath:banner.txt \# Banner file location.  
banner.image.location=classpath:banner.gif \# Banner image file location (jpg/png can also be used).  
banner.image.width= \# Width of the banner image in chars (default 76)  
banner.image.height= \# Height of the banner image in chars (default based on image height)  
banner.image.margin= \# Left hand image margin in chars (default 2)  
banner.image.invert= \# If images should be inverted for dark terminal themes (default false)

\# LOGGING  
logging.config= \# Location of the logging configuration file. For instance \`classpath:logback.xml\` for Logback  
logging.exception-conversion-word=%wEx \# Conversion word used when logging exceptions.  
logging.file= \# Log file name. For instance \`myapp.log\`  
logging.level.\*= \# Log levels severity mapping. For instance \`logging.level.org.springframework=DEBUG\`  
logging.path= \# Location of the log file. For instance \`/var/log\`  
logging.pattern.console= \# Appender pattern for output to the console. Only supported with the default logback setup.  
logging.pattern.file= \# Appender pattern for output to the file. Only supported with the default logback setup.  
logging.pattern.level= \# Appender pattern for log level (default %5p). Only supported with the default logback setup.  
logging.register-shutdown-hook=false \# Register a shutdown hook for the logging system when it is initialized.

\# AOP  
spring.aop.auto=true \# Add @EnableAspectJAutoProxy.  
spring.aop.proxy-target-class=false \# Whether subclass-based (CGLIB) proxies are to be created (true) as opposed to standard Java interface-based proxies (false).

\# IDENTITY (ContextIdApplicationContextInitializer)  
spring.application.index= \# Application index.  
spring.application.name= \# Application name.

\# ADMIN (SpringApplicationAdminJmxAutoConfiguration)  
spring.application.admin.enabled=false \# Enable admin features for the application.  
spring.application.admin.jmx-name=org.springframework.boot:type=Admin,name=SpringApplication \# JMX name of the application admin MBean.

\# AUTO-CONFIGURATION  
spring.autoconfigure.exclude= \# Auto-configuration classes to exclude.

\# SPRING CORE  
spring.beaninfo.ignore=true \# Skip search of BeanInfo classes.

\# SPRING CACHE (CacheProperties)  
spring.cache.cache-names= \# Comma-separated list of cache names to create if supported by the underlying cache manager.  
spring.cache.caffeine.spec= \# The spec to use to create caches. Check CaffeineSpec for more details on the spec format.  
spring.cache.couchbase.expiration=0 \# Entry expiration in milliseconds. By default the entries never expire.  
spring.cache.ehcache.config= \# The location of the configuration file to use to initialize EhCache.  
spring.cache.guava.spec= \# The spec to use to create caches. Check CacheBuilderSpec for more details on the spec format.  
spring.cache.infinispan.config= \# The location of the configuration file to use to initialize Infinispan.  
spring.cache.jcache.config= \# The location of the configuration file to use to initialize the cache manager.  
spring.cache.jcache.provider= \# Fully qualified name of the CachingProvider implementation to use to retrieve the JSR-107 compliant cache manager. Only needed if more than one JSR-107 implementation is available on the classpath.  
spring.cache.type= \# Cache type, auto-detected according to the environment by default.

\# SPRING CONFIG - using environment property only (ConfigFileApplicationListener)  
spring.config.location= \# Config file locations.  
spring.config.name=application \# Config file name.

\# HAZELCAST (HazelcastProperties)  
spring.hazelcast.config= \# The location of the configuration file to use to initialize Hazelcast.

\# PROJECT INFORMATION (ProjectInfoProperties)  
spring.info.build.location=classpath:META-INF/build-info.properties \# Location of the generated build-info.properties file.  
spring.info.git.location=classpath:git.properties \# Location of the generated git.properties file.

\# JMX  
spring.jmx.default-domain= \# JMX domain name.  
spring.jmx.enabled=true \# Expose management beans to the JMX domain.  
spring.jmx.server=mbeanServer \# MBeanServer bean name.

\# Email (MailProperties)  
spring.mail.default-encoding=UTF-8 \# Default MimeMessage encoding.  
spring.mail.host= \# SMTP server host. For instance \`smtp.example.com\`  
spring.mail.jndi-name= \# Session JNDI name. When set, takes precedence to others mail settings.  
spring.mail.password= \# Login password of the SMTP server.  
spring.mail.port= \# SMTP server port.  
spring.mail.properties.\*= \# Additional JavaMail session properties.  
spring.mail.protocol=smtp \# Protocol used by the SMTP server.  
spring.mail.test-connection=false \# Test that the mail server is available on startup.  
spring.mail.username= \# Login user of the SMTP server.

\# APPLICATION SETTINGS (SpringApplication)  
spring.main.banner-mode=console \# Mode used to display the banner when the application runs.  
spring.main.sources= \# Sources (class name, package name or XML resource location) to include in the ApplicationContext.  
spring.main.web-environment= \# Run the application in a web environment (auto-detected by default).

\# FILE ENCODING (FileEncodingApplicationListener)  
spring.mandatory-file-encoding= \# Expected character encoding the application must use.

\# INTERNATIONALIZATION (MessageSourceAutoConfiguration)  
spring.messages.always-use-message-format=false \# Set whether to always apply the MessageFormat rules, parsing even messages without arguments.  
spring.messages.basename=messages \# Comma-separated list of basenames, each following the ResourceBundle convention.  
spring.messages.cache-seconds=-1 \# Loaded resource bundle files cache expiration, in seconds. When set to -1, bundles are cached forever.  
spring.messages.encoding=UTF-8 \# Message bundles encoding.  
spring.messages.fallback-to-system-locale=true \# Set whether to fall back to the system Locale if no files for a specific Locale have been found.

\# OUTPUT  
spring.output.ansi.enabled=detect \# Configure the ANSI output.

\# PID FILE (ApplicationPidFileWriter)  
spring.pid.fail-on-write-error= \# Fail if ApplicationPidFileWriter is used but it cannot write the PID file.  
spring.pid.file= \# Location of the PID file to write (if ApplicationPidFileWriter is used).

\# PROFILES  
spring.profiles.active= \# Comma-separated list (or list if using YAML) of active profiles.  
spring.profiles.include= \# Unconditionally activate the specified comma separated profiles (or list of profiles if using YAML).

\# SENDGRID (SendGridAutoConfiguration)  
spring.sendgrid.api-key= \# SendGrid api key (alternative to username/password)  
spring.sendgrid.username= \# SendGrid account username  
spring.sendgrid.password= \# SendGrid account password  
spring.sendgrid.proxy.host= \# SendGrid proxy host  
spring.sendgrid.proxy.port= \# SendGrid proxy port

\# ----------------------------------------  
\# WEB PROPERTIES  
\# ----------------------------------------

\# EMBEDDED SERVER CONFIGURATION (ServerProperties)  
server.address= \# Network address to which the server should bind to.  
server.compression.enabled=false \# If response compression is enabled.  
server.compression.excluded-user-agents= \# List of user-agents to exclude from compression.  
server.compression.mime-types= \# Comma-separated list of MIME types that should be compressed. For instance \`text/html,text/css,application/json\`  
server.compression.min-response-size= \# Minimum response size that is required for compression to be performed. For instance 2048  
server.connection-timeout= \# Time in milliseconds that connectors will wait for another HTTP request before closing the connection. When not set, the connector's container-specific default will be used. Use a value of -1 to indicate no (i.e. infinite) timeout.  
server.context-parameters.\*= \# Servlet context init parameters. For instance \`server.context-parameters.a=alpha\`  
server.context-path= \# Context path of the application.  
server.display-name=application \# Display name of the application.  
server.max-http-header-size=0 \# Maximum size in bytes of the HTTP message header.  
server.error.include-stacktrace=never \# When to include a "stacktrace" attribute.  
server.error.path=/error \# Path of the error controller.  
server.error.whitelabel.enabled=true \# Enable the default error page displayed in browsers in case of a server error.  
server.jetty.acceptors= \# Number of acceptor threads to use.  
server.jetty.max-http-post-size=0 \# Maximum size in bytes of the HTTP post or put content.  
server.jetty.selectors= \# Number of selector threads to use.  
server.jsp-servlet.class-name=org.apache.jasper.servlet.JspServlet \# The class name of the JSP servlet.  
server.jsp-servlet.init-parameters.\*= \# Init parameters used to configure the JSP servlet  
server.jsp-servlet.registered=true \# Whether or not the JSP servlet is registered  
server.port=8080 \# Server HTTP port.  
server.server-header= \# Value to use for the Server response header (no header is sent if empty)  
server.servlet-path=/ \# Path of the main dispatcher servlet.  
server.use-forward-headers= \# If X-Forwarded-\* headers should be applied to the HttpRequest.  
server.session.cookie.comment= \# Comment for the session cookie.  
server.session.cookie.domain= \# Domain for the session cookie.  
server.session.cookie.http-only= \# "HttpOnly" flag for the session cookie.  
server.session.cookie.max-age= \# Maximum age of the session cookie in seconds.  
server.session.cookie.name= \# Session cookie name.  
server.session.cookie.path= \# Path of the session cookie.  
server.session.cookie.secure= \# "Secure" flag for the session cookie.  
server.session.persistent=false \# Persist session data between restarts.  
server.session.store-dir= \# Directory used to store session data.  
server.session.timeout= \# Session timeout in seconds.  
server.session.tracking-modes= \# Session tracking modes (one or more of the following: "cookie", "url", "ssl").  
server.ssl.ciphers= \# Supported SSL ciphers.  
server.ssl.client-auth= \# Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store.  
server.ssl.enabled= \# Enable SSL support.  
server.ssl.enabled-protocols= \# Enabled SSL protocols.  
server.ssl.key-alias= \# Alias that identifies the key in the key store.  
server.ssl.key-password= \# Password used to access the key in the key store.  
server.ssl.key-store= \# Path to the key store that holds the SSL certificate (typically a jks file).  
server.ssl.key-store-password= \# Password used to access the key store.  
server.ssl.key-store-provider= \# Provider for the key store.  
server.ssl.key-store-type= \# Type of the key store.  
server.ssl.protocol=TLS \# SSL protocol to use.  
server.ssl.trust-store= \# Trust store that holds SSL certificates.  
server.ssl.trust-store-password= \# Password used to access the trust store.  
server.ssl.trust-store-provider= \# Provider for the trust store.  
server.ssl.trust-store-type= \# Type of the trust store.  
server.tomcat.accept-count= \# Maximum queue length for incoming connection requests when all possible request processing threads are in use.  
server.tomcat.accesslog.buffered=true \# Buffer output such that it is only flushed periodically.  
server.tomcat.accesslog.directory=logs \# Directory in which log files are created. Can be relative to the tomcat base dir or absolute.  
server.tomcat.accesslog.enabled=false \# Enable access log.  
server.tomcat.accesslog.pattern=common \# Format pattern for access logs.  
server.tomcat.accesslog.prefix=access\_log \# Log file name prefix.  
server.tomcat.accesslog.rename-on-rotate=false \# Defer inclusion of the date stamp in the file name until rotate time.  
server.tomcat.accesslog.request-attributes-enabled=false \# Set request attributes for IP address, Hostname, protocol and port used for the request.  
server.tomcat.accesslog.rotate=true \# Enable access log rotation.  
server.tomcat.accesslog.suffix=.log \# Log file name suffix.  
server.tomcat.additional-tld-skip-patterns= \# Comma-separated list of additional patterns that match jars to ignore for TLD scanning.  
server.tomcat.background-processor-delay=30 \# Delay in seconds between the invocation of backgroundProcess methods.  
server.tomcat.basedir= \# Tomcat base directory. If not specified a temporary directory will be used.  
server.tomcat.internal-proxies=10\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        192\\\\.168\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        169\\\\.254\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        127\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        172\\\\.1\[6-9\]\{1\}\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        172\\\\.2\[0-9\]\{1\}\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\}|\\\\  
        172\\\\.3\[0-1\]\{1\}\\\\.\\\\d\{1,3\}\\\\.\\\\d\{1,3\} \# regular expression matching trusted IP addresses.  
server.tomcat.max-connections= \# Maximum number of connections that the server will accept and process at any given time.  
server.tomcat.max-http-post-size=0 \# Maximum size in bytes of the HTTP post content.  
server.tomcat.max-threads=0 \# Maximum amount of worker threads.  
server.tomcat.min-spare-threads=0 \# Minimum amount of worker threads.  
server.tomcat.port-header=X-Forwarded-Port \# Name of the HTTP header used to override the original port value.  
server.tomcat.protocol-header= \# Header that holds the incoming protocol, usually named "X-Forwarded-Proto".  
server.tomcat.protocol-header-https-value=https \# Value of the protocol header that indicates that the incoming request uses SSL.  
server.tomcat.redirect-context-root= \# Whether requests to the context root should be redirected by appending a / to the path.  
server.tomcat.remote-ip-header= \# Name of the http header from which the remote ip is extracted. For instance \`X-FORWARDED-FOR\`  
server.tomcat.uri-encoding=UTF-8 \# Character encoding to use to decode the URI.  
server.undertow.accesslog.dir= \# Undertow access log directory.  
server.undertow.accesslog.enabled=false \# Enable access log.  
server.undertow.accesslog.pattern=common \# Format pattern for access logs.  
server.undertow.accesslog.prefix=access\_log. \# Log file name prefix.  
server.undertow.accesslog.rotate=true \# Enable access log rotation.  
server.undertow.accesslog.suffix=log \# Log file name suffix.  
server.undertow.buffer-size= \# Size of each buffer in bytes.  
server.undertow.buffers-per-region= \# Number of buffer per region.  
server.undertow.direct-buffers= \# Allocate buffers outside the Java heap.  
server.undertow.io-threads= \# Number of I/O threads to create for the worker.  
server.undertow.max-http-post-size=0 \# Maximum size in bytes of the HTTP post content.  
server.undertow.worker-threads= \# Number of worker threads.

\# FREEMARKER (FreeMarkerAutoConfiguration)  
spring.freemarker.allow-request-override=false \# Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.freemarker.allow-session-override=false \# Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.freemarker.cache=false \# Enable template caching.  
spring.freemarker.charset=UTF-8 \# Template encoding.  
spring.freemarker.check-template-location=true \# Check that the templates location exists.  
spring.freemarker.content-type=text/html \# Content-Type value.  
spring.freemarker.enabled=true \# Enable MVC view resolution for this technology.  
spring.freemarker.expose-request-attributes=false \# Set whether all request attributes should be added to the model prior to merging with the template.  
spring.freemarker.expose-session-attributes=false \# Set whether all HttpSession attributes should be added to the model prior to merging with the template.  
spring.freemarker.expose-spring-macro-helpers=true \# Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".  
spring.freemarker.prefer-file-system-access=true \# Prefer file system access for template loading. File system access enables hot detection of template changes.  
spring.freemarker.prefix= \# Prefix that gets prepended to view names when building a URL.  
spring.freemarker.request-context-attribute= \# Name of the RequestContext attribute for all views.  
spring.freemarker.settings.\*= \# Well-known FreeMarker keys which will be passed to FreeMarker's Configuration.  
spring.freemarker.suffix= \# Suffix that gets appended to view names when building a URL.  
spring.freemarker.template-loader-path=classpath:/templates/ \# Comma-separated list of template paths.  
spring.freemarker.view-names= \# White list of view names that can be resolved.

\# GROOVY TEMPLATES (GroovyTemplateAutoConfiguration)  
spring.groovy.template.allow-request-override=false \# Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.groovy.template.allow-session-override=false \# Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.groovy.template.cache= \# Enable template caching.  
spring.groovy.template.charset=UTF-8 \# Template encoding.  
spring.groovy.template.check-template-location=true \# Check that the templates location exists.  
spring.groovy.template.configuration.\*= \# See GroovyMarkupConfigurer  
spring.groovy.template.content-type=test/html \# Content-Type value.  
spring.groovy.template.enabled=true \# Enable MVC view resolution for this technology.  
spring.groovy.template.expose-request-attributes=false \# Set whether all request attributes should be added to the model prior to merging with the template.  
spring.groovy.template.expose-session-attributes=false \# Set whether all HttpSession attributes should be added to the model prior to merging with the template.  
spring.groovy.template.expose-spring-macro-helpers=true \# Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".  
spring.groovy.template.prefix= \# Prefix that gets prepended to view names when building a URL.  
spring.groovy.template.request-context-attribute= \# Name of the RequestContext attribute for all views.  
spring.groovy.template.resource-loader-path=classpath:/templates/ \# Template path.  
spring.groovy.template.suffix=.tpl \# Suffix that gets appended to view names when building a URL.  
spring.groovy.template.view-names= \# White list of view names that can be resolved.

\# SPRING HATEOAS (HateoasProperties)  
spring.hateoas.use-hal-as-default-json-media-type=true \# Specify if application/hal+json responses should be sent to requests that accept application/json.

\# HTTP message conversion  
spring.http.converters.preferred-json-mapper=jackson \# Preferred JSON mapper to use for HTTP message conversion. Set to "gson" to force the use of Gson when both it and Jackson are on the classpath.

\# HTTP encoding (HttpEncodingProperties)  
spring.http.encoding.charset=UTF-8 \# Charset of HTTP requests and responses. Added to the "Content-Type" header if not set explicitly.  
spring.http.encoding.enabled=true \# Enable http encoding support.  
spring.http.encoding.force= \# Force the encoding to the configured charset on HTTP requests and responses.  
spring.http.encoding.force-request= \# Force the encoding to the configured charset on HTTP requests. Defaults to true when "force" has not been specified.  
spring.http.encoding.force-response= \# Force the encoding to the configured charset on HTTP responses.  
spring.http.encoding.mapping= \# Locale to Encoding mapping.

\# MULTIPART (MultipartProperties)  
spring.http.multipart.enabled=true \# Enable support of multi-part uploads.  
spring.http.multipart.file-size-threshold=0 \# Threshold after which files will be written to disk. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size.  
spring.http.multipart.location= \# Intermediate location of uploaded files.  
spring.http.multipart.max-file-size=1MB \# Max file size. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size.  
spring.http.multipart.max-request-size=10MB \# Max request size. Values can use the suffixed "MB" or "KB" to indicate a Megabyte or Kilobyte size.  
spring.http.multipart.resolve-lazily=false \# Whether to resolve the multipart request lazily at the time of file or parameter access.

\# JACKSON (JacksonProperties)  
spring.jackson.date-format= \# Date format string or a fully-qualified date format class name. For instance \`yyyy-MM-dd HH:mm:ss\`.  
spring.jackson.default-property-inclusion= \# Controls the inclusion of properties during serialization.  
spring.jackson.deserialization.\*= \# Jackson on/off features that affect the way Java objects are deserialized.  
spring.jackson.generator.\*= \# Jackson on/off features for generators.  
spring.jackson.joda-date-time-format= \# Joda date time format string. If not configured, "date-format" will be used as a fallback if it is configured with a format string.  
spring.jackson.locale= \# Locale used for formatting.  
spring.jackson.mapper.\*= \# Jackson general purpose on/off features.  
spring.jackson.parser.\*= \# Jackson on/off features for parsers.  
spring.jackson.property-naming-strategy= \# One of the constants on Jackson's PropertyNamingStrategy. Can also be a fully-qualified class name of a PropertyNamingStrategy subclass.  
spring.jackson.serialization.\*= \# Jackson on/off features that affect the way Java objects are serialized.  
spring.jackson.time-zone= \# Time zone used when formatting dates. For instance \`America/Los\_Angeles\`

\# JERSEY (JerseyProperties)  
spring.jersey.application-path= \# Path that serves as the base URI for the application. Overrides the value of "@ApplicationPath" if specified.  
spring.jersey.filter.order=0 \# Jersey filter chain order.  
spring.jersey.init.\*= \# Init parameters to pass to Jersey via the servlet or filter.  
spring.jersey.servlet.load-on-startup=-1 \# Load on startup priority of the Jersey servlet.  
spring.jersey.type=servlet \# Jersey integration type.

\# SPRING LDAP (LdapProperties)  
spring.ldap.urls= \# LDAP URLs of the server.  
spring.ldap.base= \# Base suffix from which all operations should originate.  
spring.ldap.username= \# Login user of the server.  
spring.ldap.password= \# Login password of the server.  
spring.ldap.base-environment.\*= \# LDAP specification settings.

\# EMBEDDED LDAP (EmbeddedLdapProperties)  
spring.ldap.embedded.base-dn= \# The base DN  
spring.ldap.embedded.credential.username= \# Embedded LDAP username.  
spring.ldap.embedded.credential.password= \# Embedded LDAP password.  
spring.ldap.embedded.ldif=classpath:schema.ldif \# Schema (LDIF) script resource reference.  
spring.ldap.embedded.port= \# Embedded LDAP port.  
spring.ldap.embedded.validation.enabled=true \# Enable LDAP schema validation.  
spring.ldap.embedded.validation.schema= \# Path to the custom schema.

\# SPRING MOBILE DEVICE VIEWS (DeviceDelegatingViewResolverAutoConfiguration)  
spring.mobile.devicedelegatingviewresolver.enable-fallback=false \# Enable support for fallback resolution.  
spring.mobile.devicedelegatingviewresolver.enabled=false \# Enable device view resolver.  
spring.mobile.devicedelegatingviewresolver.mobile-prefix=mobile/ \# Prefix that gets prepended to view names for mobile devices.  
spring.mobile.devicedelegatingviewresolver.mobile-suffix= \# Suffix that gets appended to view names for mobile devices.  
spring.mobile.devicedelegatingviewresolver.normal-prefix= \# Prefix that gets prepended to view names for normal devices.  
spring.mobile.devicedelegatingviewresolver.normal-suffix= \# Suffix that gets appended to view names for normal devices.  
spring.mobile.devicedelegatingviewresolver.tablet-prefix=tablet/ \# Prefix that gets prepended to view names for tablet devices.  
spring.mobile.devicedelegatingviewresolver.tablet-suffix= \# Suffix that gets appended to view names for tablet devices.

\# SPRING MOBILE SITE PREFERENCE (SitePreferenceAutoConfiguration)  
spring.mobile.sitepreference.enabled=true \# Enable SitePreferenceHandler.

\# MUSTACHE TEMPLATES (MustacheAutoConfiguration)  
spring.mustache.allow-request-override= \# Set whether HttpServletRequest attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.mustache.allow-session-override= \# Set whether HttpSession attributes are allowed to override (hide) controller generated model attributes of the same name.  
spring.mustache.cache= \# Enable template caching.  
spring.mustache.charset= \# Template encoding.  
spring.mustache.check-template-location= \# Check that the templates location exists.  
spring.mustache.content-type= \# Content-Type value.  
spring.mustache.enabled= \# Enable MVC view resolution for this technology.  
spring.mustache.expose-request-attributes= \# Set whether all request attributes should be added to the model prior to merging with the template.  
spring.mustache.expose-session-attributes= \# Set whether all HttpSession attributes should be added to the model prior to merging with the template.  
spring.mustache.expose-spring-macro-helpers= \# Set whether to expose a RequestContext for use by Spring's macro library, under the name "springMacroRequestContext".  
spring.mustache.prefix=classpath:/templates/ \# Prefix to apply to template names.  
spring.mustache.request-context-attribute= \# Name of the RequestContext attribute for all views.  
spring.mustache.suffix=.html \# Suffix to apply to template names.  
spring.mustache.view-names= \# White list of view names that can be resolved.

\# SPRING MVC (WebMvcProperties)  
spring.mvc.async.request-timeout= \# Amount of time (in milliseconds) before asynchronous request handling times out.  
spring.mvc.date-format= \# Date format to use. For instance \`dd/MM/yyyy\`.  
spring.mvc.dispatch-trace-request=false \# Dispatch TRACE requests to the FrameworkServlet doService method.  
spring.mvc.dispatch-options-request=true \# Dispatch OPTIONS requests to the FrameworkServlet doService method.  
spring.mvc.favicon.enabled=true \# Enable resolution of favicon.ico.  
spring.mvc.formcontent.putfilter.enabled=true \# Enable Spring's HttpPutFormContentFilter.  
spring.mvc.ignore-default-model-on-redirect=true \# If the content of the "default" model should be ignored during redirect scenarios.  
spring.mvc.locale= \# Locale to use. By default, this locale is overridden by the "Accept-Language" header.  
spring.mvc.locale-resolver=accept-header \# Define how the locale should be resolved.  
spring.mvc.log-resolved-exception=false \# Enable warn logging of exceptions resolved by a "HandlerExceptionResolver".  
spring.mvc.media-types.\*= \# Maps file extensions to media types for content negotiation.  
spring.mvc.message-codes-resolver-format= \# Formatting strategy for message codes. For instance \`PREFIX\_ERROR\_CODE\`.  
spring.mvc.servlet.load-on-startup=-1 \# Load on startup priority of the Spring Web Services servlet.  
spring.mvc.static-path-pattern=/\*\* \# Path pattern used for static resources.  
spring.mvc.throw-exception-if-no-handler-found=false \# If a "NoHandlerFoundException" should be thrown if no Handler was found to process a request.  
spring.mvc.view.prefix= \# Spring MVC view prefix.  
spring.mvc.view.suffix= \# Spring MVC view suffix.

\# SPRING RESOURCES HANDLING (ResourceProperties)  
spring.resources.add-mappings=true \# Enable default resource handling.  
spring.resources.cache-period= \# Cache period for the resources served by the resource handler, in seconds.  
spring.resources.chain.cache=true \# Enable caching in the Resource chain.  
spring.resources.chain.enabled= \# Enable the Spring Resource Handling chain. Disabled by default unless at least one strategy has been enabled.  
spring.resources.chain.gzipped=false \# Enable resolution of already gzipped resources.  
spring.resources.chain.html-application-cache=false \# Enable HTML5 application cache manifest rewriting.  
spring.resources.chain.strategy.content.enabled=false \# Enable the content Version Strategy.  
spring.resources.chain.strategy.content.paths=/\*\* \# Comma-separated list of patterns to apply to the Version Strategy.  
spring.resources.chain.strategy.fixed.enabled=false \# Enable the fixed Version Strategy.  
spring.resources.chain.strategy.fixed.paths=/\*\* \# Comma-separated list of patterns to apply to the Version Strategy.  
spring.resources.chain.strategy.fixed.version= \# Version string to use for the Version Strategy.  
spring.resources.static-locations=classpath:/META-INF/resources/,classpath:/resources/,classpath:/static/,classpath:/public/ \# Locations of static resources.

\# SPRING SESSION (SessionProperties)  
spring.session.hazelcast.flush-mode=on-save \# Sessions flush mode.  
spring.session.hazelcast.map-name=spring:session:sessions \# Name of the map used to store sessions.  
spring.session.jdbc.initializer.enabled= \# Create the required session tables on startup if necessary. Enabled automatically if the default table name is set or a custom schema is configured.  
spring.session.jdbc.schema=classpath:org/springframework/session/jdbc/schema-@@platform@@.sql \# Path to the SQL file to use to initialize the database schema.  
spring.session.jdbc.table-name=SPRING\_SESSION \# Name of database table used to store sessions.  
spring.session.mongo.collection-name=sessions \# Collection name used to store sessions.  
spring.session.redis.flush-mode=on-save \# Sessions flush mode.  
spring.session.redis.namespace= \# Namespace for keys used to store sessions.  
spring.session.store-type= \# Session store type.

\# SPRING SOCIAL (SocialWebAutoConfiguration)  
spring.social.auto-connection-views=false \# Enable the connection status view for supported providers.

\# SPRING SOCIAL FACEBOOK (FacebookAutoConfiguration)  
spring.social.facebook.app-id= \# your application's Facebook App ID  
spring.social.facebook.app-secret= \# your application's Facebook App Secret

\# SPRING SOCIAL LINKEDIN (LinkedInAutoConfiguration)  
spring.social.linkedin.app-id= \# your application's LinkedIn App ID  
spring.social.linkedin.app-secret= \# your application's LinkedIn App Secret

\# SPRING SOCIAL TWITTER (TwitterAutoConfiguration)  
spring.social.twitter.app-id= \# your application's Twitter App ID  
spring.social.twitter.app-secret= \# your application's Twitter App Secret

\# THYMELEAF (ThymeleafAutoConfiguration)  
spring.thymeleaf.cache=true \# Enable template caching.  
spring.thymeleaf.check-template=true \# Check that the template exists before rendering it.  
spring.thymeleaf.check-template-location=true \# Check that the templates location exists.  
spring.thymeleaf.content-type=text/html \# Content-Type value.  
spring.thymeleaf.enabled=true \# Enable MVC Thymeleaf view resolution.  
spring.thymeleaf.encoding=UTF-8 \# Template encoding.  
spring.thymeleaf.excluded-view-names= \# Comma-separated list of view names that should be excluded from resolution.  
spring.thymeleaf.mode=HTML5 \# Template mode to be applied to templates. See also StandardTemplateModeHandlers.  
spring.thymeleaf.prefix=classpath:/templates/ \# Prefix that gets prepended to view names when building a URL.  
spring.thymeleaf.suffix=.html \# Suffix that gets appended to view names when building a URL.  
spring.thymeleaf.template-resolver-order= \# Order of the template resolver in the chain.  
spring.thymeleaf.view-names= \# Comma-separated list of view names that can be resolved.

\# SPRING WEB SERVICES (WebServicesProperties)  
spring.webservices.path=/services \# Path that serves as the base URI for the services.  
spring.webservices.servlet.init= \# Servlet init parameters to pass to Spring Web Services.  
spring.webservices.servlet.load-on-startup=-1 \# Load on startup priority of the Spring Web Services servlet.

\# ----------------------------------------  
\# SECURITY PROPERTIES  
\# ----------------------------------------  
\# SECURITY (SecurityProperties)  
security.basic.authorize-mode=role \# Security authorize mode to apply.  
security.basic.enabled=true \# Enable basic authentication.  
security.basic.path=/\*\* \# Comma-separated list of paths to secure.  
security.basic.realm=Spring \# HTTP basic realm name.  
security.enable-csrf=false \# Enable Cross Site Request Forgery support.  
security.filter-order=0 \# Security filter chain order.  
security.filter-dispatcher-types=ASYNC, FORWARD, INCLUDE, REQUEST \# Security filter chain dispatcher types.  
security.headers.cache=true \# Enable cache control HTTP headers.  
security.headers.content-security-policy= \# Value for content security policy header.  
security.headers.content-security-policy-mode=default \# Content security policy mode.  
security.headers.content-type=true \# Enable "X-Content-Type-Options" header.  
security.headers.frame=true \# Enable "X-Frame-Options" header.  
security.headers.hsts=all \# HTTP Strict Transport Security (HSTS) mode (none, domain, all).  
security.headers.xss=true \# Enable cross site scripting (XSS) protection.  
security.ignored= \# Comma-separated list of paths to exclude from the default secured paths.  
security.require-ssl=false \# Enable secure channel for all requests.  
security.sessions=stateless \# Session creation policy (always, never, if\_required, stateless).  
security.user.name=user \# Default user name.  
security.user.password= \# Password for the default user name. A random password is logged on startup by default.  
security.user.role=USER \# Granted roles for the default user name.

\# SECURITY OAUTH2 CLIENT (OAuth2ClientProperties)  
security.oauth2.client.client-id= \# OAuth2 client id.  
security.oauth2.client.client-secret= \# OAuth2 client secret. A random secret is generated by default

\# SECURITY OAUTH2 RESOURCES (ResourceServerProperties)  
security.oauth2.resource.filter-order= \# The order of the filter chain used to authenticate tokens.  
security.oauth2.resource.id= \# Identifier of the resource.  
security.oauth2.resource.jwt.key-uri= \# The URI of the JWT token. Can be set if the value is not available and the key is public.  
security.oauth2.resource.jwt.key-value= \# The verification key of the JWT token. Can either be a symmetric secret or PEM-encoded RSA public key.  
security.oauth2.resource.prefer-token-info=true \# Use the token info, can be set to false to use the user info.  
security.oauth2.resource.service-id=resource \#  
security.oauth2.resource.token-info-uri= \# URI of the token decoding endpoint.  
security.oauth2.resource.token-type= \# The token type to send when using the userInfoUri.  
security.oauth2.resource.user-info-uri= \# URI of the user endpoint.

\# SECURITY OAUTH2 SSO (OAuth2SsoProperties)  
security.oauth2.sso.filter-order= \# Filter order to apply if not providing an explicit WebSecurityConfigurerAdapter  
security.oauth2.sso.login-path=/login \# Path to the login page, i.e. the one that triggers the redirect to the OAuth2 Authorization Server

\# ----------------------------------------  
\# DATA PROPERTIES  
\# ----------------------------------------

\# FLYWAY (FlywayProperties)  
flyway.baseline-description= \#  
flyway.baseline-version=1 \# version to start migration  
flyway.baseline-on-migrate= \#  
flyway.check-location=false \# Check that migration scripts location exists.  
flyway.clean-on-validation-error= \#  
flyway.enabled=true \# Enable flyway.  
flyway.encoding= \#  
flyway.ignore-failed-future-migration= \#  
flyway.init-sqls= \# SQL statements to execute to initialize a connection immediately after obtaining it.  
flyway.locations=classpath:db/migration \# locations of migrations scripts  
flyway.out-of-order= \#  
flyway.password= \# JDBC password if you want Flyway to create its own DataSource  
flyway.placeholder-prefix= \#  
flyway.placeholder-replacement= \#  
flyway.placeholder-suffix= \#  
flyway.placeholders.\*= \#  
flyway.schemas= \# schemas to update  
flyway.sql-migration-prefix=V \#  
flyway.sql-migration-separator= \#  
flyway.sql-migration-suffix=.sql \#  
flyway.table= \#  
flyway.url= \# JDBC url of the database to migrate. If not set, the primary configured data source is used.  
flyway.user= \# Login user of the database to migrate.  
flyway.validate-on-migrate= \#

\# LIQUIBASE (LiquibaseProperties)  
liquibase.change-log=classpath:/db/changelog/db.changelog-master.yaml \# Change log configuration path.  
liquibase.check-change-log-location=true \# Check the change log location exists.  
liquibase.contexts= \# Comma-separated list of runtime contexts to use.  
liquibase.default-schema= \# Default database schema.  
liquibase.drop-first=false \# Drop the database schema first.  
liquibase.enabled=true \# Enable liquibase support.  
liquibase.labels= \# Comma-separated list of runtime labels to use.  
liquibase.parameters.\*= \# Change log parameters.  
liquibase.password= \# Login password of the database to migrate.  
liquibase.rollback-file= \# File to which rollback SQL will be written when an update is performed.  
liquibase.url= \# JDBC url of the database to migrate. If not set, the primary configured data source is used.  
liquibase.user= \# Login user of the database to migrate.

\# COUCHBASE (CouchbaseProperties)  
spring.couchbase.bootstrap-hosts= \# Couchbase nodes (host or IP address) to bootstrap from.  
spring.couchbase.bucket.name=default \# Name of the bucket to connect to.  
spring.couchbase.bucket.password=  \# Password of the bucket.  
spring.couchbase.env.endpoints.key-value=1 \# Number of sockets per node against the Key/value service.  
spring.couchbase.env.endpoints.query=1 \# Number of sockets per node against the Query (N1QL) service.  
spring.couchbase.env.endpoints.view=1 \# Number of sockets per node against the view service.  
spring.couchbase.env.ssl.enabled= \# Enable SSL support. Enabled automatically if a "keyStore" is provided unless specified otherwise.  
spring.couchbase.env.ssl.key-store= \# Path to the JVM key store that holds the certificates.  
spring.couchbase.env.ssl.key-store-password= \# Password used to access the key store.  
spring.couchbase.env.timeouts.connect=5000 \# Bucket connections timeout in milliseconds.  
spring.couchbase.env.timeouts.key-value=2500 \# Blocking operations performed on a specific key timeout in milliseconds.  
spring.couchbase.env.timeouts.query=7500 \# N1QL query operations timeout in milliseconds.  
spring.couchbase.env.timeouts.socket-connect=1000 \# Socket connect connections timeout in milliseconds.  
spring.couchbase.env.timeouts.view=7500 \# Regular and geospatial view operations timeout in milliseconds.

\# DAO (PersistenceExceptionTranslationAutoConfiguration)  
spring.dao.exceptiontranslation.enabled=true \# Enable the PersistenceExceptionTranslationPostProcessor.

\# CASSANDRA (CassandraProperties)  
spring.data.cassandra.cluster-name= \# Name of the Cassandra cluster.  
spring.data.cassandra.compression=none \# Compression supported by the Cassandra binary protocol.  
spring.data.cassandra.connect-timeout-millis= \# Socket option: connection time out.  
spring.data.cassandra.consistency-level= \# Queries consistency level.  
spring.data.cassandra.contact-points=localhost \# Comma-separated list of cluster node addresses.  
spring.data.cassandra.fetch-size= \# Queries default fetch size.  
spring.data.cassandra.keyspace-name= \# Keyspace name to use.  
spring.data.cassandra.load-balancing-policy= \# Class name of the load balancing policy.  
spring.data.cassandra.port= \# Port of the Cassandra server.  
spring.data.cassandra.password= \# Login password of the server.  
spring.data.cassandra.read-timeout-millis= \# Socket option: read time out.  
spring.data.cassandra.reconnection-policy= \# Reconnection policy class.  
spring.data.cassandra.retry-policy= \# Class name of the retry policy.  
spring.data.cassandra.serial-consistency-level= \# Queries serial consistency level.  
spring.data.cassandra.schema-action=none \# Schema action to take at startup.  
spring.data.cassandra.ssl=false \# Enable SSL support.  
spring.data.cassandra.username= \# Login user of the server.

\# DATA COUCHBASE (CouchbaseDataProperties)  
spring.data.couchbase.auto-index=false \# Automatically create views and indexes.  
spring.data.couchbase.consistency=read-your-own-writes \# Consistency to apply by default on generated queries.  
spring.data.couchbase.repositories.enabled=true \# Enable Couchbase repositories.

\# ELASTICSEARCH (ElasticsearchProperties)  
spring.data.elasticsearch.cluster-name=elasticsearch \# Elasticsearch cluster name.  
spring.data.elasticsearch.cluster-nodes= \# Comma-separated list of cluster node addresses. If not specified, starts a client node.  
spring.data.elasticsearch.properties.\*= \# Additional properties used to configure the client.  
spring.data.elasticsearch.repositories.enabled=true \# Enable Elasticsearch repositories.

\# DATA LDAP  
spring.data.ldap.repositories.enabled=true \# Enable LDAP repositories.

\# MONGODB (MongoProperties)  
spring.data.mongodb.authentication-database= \# Authentication database name.  
spring.data.mongodb.database=test \# Database name.  
spring.data.mongodb.field-naming-strategy= \# Fully qualified name of the FieldNamingStrategy to use.  
spring.data.mongodb.grid-fs-database= \# GridFS database name.  
spring.data.mongodb.host=localhost \# Mongo server host. Cannot be set with uri.  
spring.data.mongodb.password= \# Login password of the mongo server. Cannot be set with uri.  
spring.data.mongodb.port=27017 \# Mongo server port. Cannot be set with uri.  
spring.data.mongodb.repositories.enabled=true \# Enable Mongo repositories.  
spring.data.mongodb.uri=mongodb://localhost/test \# Mongo database URI. Cannot be set with host, port and credentials.  
spring.data.mongodb.username= \# Login user of the mongo server. Cannot be set with uri.

\# DATA REDIS  
spring.data.redis.repositories.enabled=true \# Enable Redis repositories.

\# NEO4J (Neo4jProperties)  
spring.data.neo4j.compiler= \# Compiler to use.  
spring.data.neo4j.embedded.enabled=true \# Enable embedded mode if the embedded driver is available.  
spring.data.neo4j.open-in-view=false \# Register OpenSessionInViewInterceptor. Binds a Neo4j Session to the thread for the entire processing of the request.  
spring.data.neo4j.password= \# Login password of the server.  
spring.data.neo4j.repositories.enabled=true \# Enable Neo4j repositories.  
spring.data.neo4j.uri= \# URI used by the driver. Auto-detected by default.  
spring.data.neo4j.username= \# Login user of the server.

\# DATA REST (RepositoryRestProperties)  
spring.data.rest.base-path= \# Base path to be used by Spring Data REST to expose repository resources.  
spring.data.rest.default-page-size= \# Default size of pages.  
spring.data.rest.detection-strategy=default \# Strategy to use to determine which repositories get exposed.  
spring.data.rest.enable-enum-translation= \# Enable enum value translation via the Spring Data REST default resource bundle.  
spring.data.rest.limit-param-name= \# Name of the URL query string parameter that indicates how many results to return at once.  
spring.data.rest.max-page-size= \# Maximum size of pages.  
spring.data.rest.page-param-name= \# Name of the URL query string parameter that indicates what page to return.  
spring.data.rest.return-body-on-create= \# Return a response body after creating an entity.  
spring.data.rest.return-body-on-update= \# Return a response body after updating an entity.  
spring.data.rest.sort-param-name= \# Name of the URL query string parameter that indicates what direction to sort results.

\# SOLR (SolrProperties)  
spring.data.solr.host=http://127.0.0.1:8983/solr \# Solr host. Ignored if "zk-host" is set.  
spring.data.solr.repositories.enabled=true \# Enable Solr repositories.  
spring.data.solr.zk-host= \# ZooKeeper host address in the form HOST:PORT.

\# DATASOURCE (DataSourceAutoConfiguration & DataSourceProperties)  
spring.datasource.continue-on-error=false \# Do not stop if an error occurs while initializing the database.  
spring.datasource.data= \# Data (DML) script resource references.  
spring.datasource.data-username= \# User of the database to execute DML scripts (if different).  
spring.datasource.data-password= \# Password of the database to execute DML scripts (if different).  
spring.datasource.dbcp2.\*= \# Commons DBCP2 specific settings  
spring.datasource.driver-class-name= \# Fully qualified name of the JDBC driver. Auto-detected based on the URL by default.  
spring.datasource.generate-unique-name=false \# Generate a random datasource name.  
spring.datasource.hikari.\*= \# Hikari specific settings  
spring.datasource.initialize=true \# Populate the database using 'data.sql'.  
spring.datasource.jmx-enabled=false \# Enable JMX support (if provided by the underlying pool).  
spring.datasource.jndi-name= \# JNDI location of the datasource. Class, url, username & password are ignored when set.  
spring.datasource.name=testdb \# Name of the datasource.  
spring.datasource.password= \# Login password of the database.  
spring.datasource.platform=all \# Platform to use in the schema resource (schema-$\{platform\}.sql).  
spring.datasource.schema= \# Schema (DDL) script resource references.  
spring.datasource.schema-username= \# User of the database to execute DDL scripts (if different).  
spring.datasource.schema-password= \# Password of the database to execute DDL scripts (if different).  
spring.datasource.separator=; \# Statement separator in SQL initialization scripts.  
spring.datasource.sql-script-encoding= \# SQL scripts encoding.  
spring.datasource.tomcat.\*= \# Tomcat datasource specific settings  
spring.datasource.type= \# Fully qualified name of the connection pool implementation to use. By default, it is auto-detected from the classpath.  
spring.datasource.url= \# JDBC url of the database.  
spring.datasource.username=

\# JEST (Elasticsearch HTTP client) (JestProperties)  
spring.elasticsearch.jest.connection-timeout=3000 \# Connection timeout in milliseconds.  
spring.elasticsearch.jest.multi-threaded=true \# Enable connection requests from multiple execution threads.  
spring.elasticsearch.jest.password= \# Login password.  
spring.elasticsearch.jest.proxy.host= \# Proxy host the HTTP client should use.  
spring.elasticsearch.jest.proxy.port= \# Proxy port the HTTP client should use.  
spring.elasticsearch.jest.read-timeout=3000 \# Read timeout in milliseconds.  
spring.elasticsearch.jest.uris=http://localhost:9200 \# Comma-separated list of the Elasticsearch instances to use.  
spring.elasticsearch.jest.username= \# Login user.

\# H2 Web Console (H2ConsoleProperties)  
spring.h2.console.enabled=false \# Enable the console.  
spring.h2.console.path=/h2-console \# Path at which the console will be available.  
spring.h2.console.settings.trace=false \# Enable trace output.  
spring.h2.console.settings.web-allow-others=false \# Enable remote access.

\# JOOQ (JooqAutoConfiguration)  
spring.jooq.sql-dialect= \# SQLDialect JOOQ used when communicating with the configured datasource. For instance \`POSTGRES\`

\# JPA (JpaBaseConfiguration, HibernateJpaAutoConfiguration)  
spring.data.jpa.repositories.enabled=true \# Enable JPA repositories.  
spring.jpa.database= \# Target database to operate on, auto-detected by default. Can be alternatively set using the "databasePlatform" property.  
spring.jpa.database-platform= \# Name of the target database to operate on, auto-detected by default. Can be alternatively set using the "Database" enum.  
spring.jpa.generate-ddl=false \# Initialize the schema on startup.  
spring.jpa.hibernate.ddl-auto= \# DDL mode. This is actually a shortcut for the "hibernate.hbm2ddl.auto" property. Default to "create-drop" when using an embedded database, "none" otherwise.  
spring.jpa.hibernate.naming.implicit-strategy= \# Hibernate 5 implicit naming strategy fully qualified name.  
spring.jpa.hibernate.naming.physical-strategy= \# Hibernate 5 physical naming strategy fully qualified name.  
spring.jpa.hibernate.naming.strategy= \# Hibernate 4 naming strategy fully qualified name. Not supported with Hibernate 5.  
spring.jpa.hibernate.use-new-id-generator-mappings= \# Use Hibernate's newer IdentifierGenerator for AUTO, TABLE and SEQUENCE.  
spring.jpa.open-in-view=true \# Register OpenEntityManagerInViewInterceptor. Binds a JPA EntityManager to the thread for the entire processing of the request.  
spring.jpa.properties.\*= \# Additional native properties to set on the JPA provider.  
spring.jpa.show-sql=false \# Enable logging of SQL statements.

\# JTA (JtaAutoConfiguration)  
spring.jta.enabled=true \# Enable JTA support.  
spring.jta.log-dir= \# Transaction logs directory.  
spring.jta.transaction-manager-id= \# Transaction manager unique identifier.

\# ATOMIKOS (AtomikosProperties)  
spring.jta.atomikos.connectionfactory.borrow-connection-timeout=30 \# Timeout, in seconds, for borrowing connections from the pool.  
spring.jta.atomikos.connectionfactory.ignore-session-transacted-flag=true \# Whether or not to ignore the transacted flag when creating session.  
spring.jta.atomikos.connectionfactory.local-transaction-mode=false \# Whether or not local transactions are desired.  
spring.jta.atomikos.connectionfactory.maintenance-interval=60 \# The time, in seconds, between runs of the pool's maintenance thread.  
spring.jta.atomikos.connectionfactory.max-idle-time=60 \# The time, in seconds, after which connections are cleaned up from the pool.  
spring.jta.atomikos.connectionfactory.max-lifetime=0 \# The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.  
spring.jta.atomikos.connectionfactory.max-pool-size=1 \# The maximum size of the pool.  
spring.jta.atomikos.connectionfactory.min-pool-size=1 \# The minimum size of the pool.  
spring.jta.atomikos.connectionfactory.reap-timeout=0 \# The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.  
spring.jta.atomikos.connectionfactory.unique-resource-name=jmsConnectionFactory \# The unique name used to identify the resource during recovery.  
spring.jta.atomikos.datasource.borrow-connection-timeout=30 \# Timeout, in seconds, for borrowing connections from the pool.  
spring.jta.atomikos.datasource.default-isolation-level= \# Default isolation level of connections provided by the pool.  
spring.jta.atomikos.datasource.login-timeout= \# Timeout, in seconds, for establishing a database connection.  
spring.jta.atomikos.datasource.maintenance-interval=60 \# The time, in seconds, between runs of the pool's maintenance thread.  
spring.jta.atomikos.datasource.max-idle-time=60 \# The time, in seconds, after which connections are cleaned up from the pool.  
spring.jta.atomikos.datasource.max-lifetime=0 \# The time, in seconds, that a connection can be pooled for before being destroyed. 0 denotes no limit.  
spring.jta.atomikos.datasource.max-pool-size=1 \# The maximum size of the pool.  
spring.jta.atomikos.datasource.min-pool-size=1 \# The minimum size of the pool.  
spring.jta.atomikos.datasource.reap-timeout=0 \# The reap timeout, in seconds, for borrowed connections. 0 denotes no limit.  
spring.jta.atomikos.datasource.test-query= \# SQL query or statement used to validate a connection before returning it.  
spring.jta.atomikos.datasource.unique-resource-name=dataSource \# The unique name used to identify the resource during recovery.  
spring.jta.atomikos.properties.checkpoint-interval=500 \# Interval between checkpoints.  
spring.jta.atomikos.properties.console-file-count=1 \# Number of debug logs files that can be created.  
spring.jta.atomikos.properties.console-file-limit=-1 \# How many bytes can be stored at most in debug logs files.  
spring.jta.atomikos.properties.console-file-name=tm.out \# Debug logs file name.  
spring.jta.atomikos.properties.console-log-level=warn \# Console log level.  
spring.jta.atomikos.properties.default-jta-timeout=10000 \# Default timeout for JTA transactions.  
spring.jta.atomikos.properties.enable-logging=true \# Enable disk logging.  
spring.jta.atomikos.properties.force-shutdown-on-vm-exit=false \# Specify if a VM shutdown should trigger forced shutdown of the transaction core.  
spring.jta.atomikos.properties.log-base-dir= \# Directory in which the log files should be stored.  
spring.jta.atomikos.properties.log-base-name=tmlog \# Transactions log file base name.  
spring.jta.atomikos.properties.max-actives=50 \# Maximum number of active transactions.  
spring.jta.atomikos.properties.max-timeout=300000 \# Maximum timeout (in milliseconds) that can be allowed for transactions.  
spring.jta.atomikos.properties.output-dir= \# Directory in which to store the debug log files.  
spring.jta.atomikos.properties.serial-jta-transactions=true \# Specify if sub-transactions should be joined when possible.  
spring.jta.atomikos.properties.service= \# Transaction manager implementation that should be started.  
spring.jta.atomikos.properties.threaded-two-phase-commit=true \# Use different (and concurrent) threads for two-phase commit on the participating resources.  
spring.jta.atomikos.properties.transaction-manager-unique-name= \# Transaction manager's unique name.

\# BITRONIX  
spring.jta.bitronix.connectionfactory.acquire-increment=1 \# Number of connections to create when growing the pool.  
spring.jta.bitronix.connectionfactory.acquisition-interval=1 \# Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.  
spring.jta.bitronix.connectionfactory.acquisition-timeout=30 \# Timeout, in seconds, for acquiring connections from the pool.  
spring.jta.bitronix.connectionfactory.allow-local-transactions=true \# Whether or not the transaction manager should allow mixing XA and non-XA transactions.  
spring.jta.bitronix.connectionfactory.apply-transaction-timeout=false \# Whether or not the transaction timeout should be set on the XAResource when it is enlisted.  
spring.jta.bitronix.connectionfactory.automatic-enlisting-enabled=true \# Whether or not resources should be enlisted and delisted automatically.  
spring.jta.bitronix.connectionfactory.cache-producers-consumers=true \# Whether or not produces and consumers should be cached.  
spring.jta.bitronix.connectionfactory.defer-connection-release=true \# Whether or not the provider can run many transactions on the same connection and supports transaction interleaving.  
spring.jta.bitronix.connectionfactory.ignore-recovery-failures=false \# Whether or not recovery failures should be ignored.  
spring.jta.bitronix.connectionfactory.max-idle-time=60 \# The time, in seconds, after which connections are cleaned up from the pool.  
spring.jta.bitronix.connectionfactory.max-pool-size=10 \# The maximum size of the pool. 0 denotes no limit.  
spring.jta.bitronix.connectionfactory.min-pool-size=0 \# The minimum size of the pool.  
spring.jta.bitronix.connectionfactory.password= \# The password to use to connect to the JMS provider.  
spring.jta.bitronix.connectionfactory.share-transaction-connections=false \#  Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction.  
spring.jta.bitronix.connectionfactory.test-connections=true \# Whether or not connections should be tested when acquired from the pool.  
spring.jta.bitronix.connectionfactory.two-pc-ordering-position=1 \# The position that this resource should take during two-phase commit (always first is Integer.MIN\_VALUE, always last is Integer.MAX\_VALUE).  
spring.jta.bitronix.connectionfactory.unique-name=jmsConnectionFactory \# The unique name used to identify the resource during recovery.  
spring.jta.bitronix.connectionfactory.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources.  
spring.jta.bitronix.connectionfactory.user= \# The user to use to connect to the JMS provider.  
spring.jta.bitronix.datasource.acquire-increment=1 \# Number of connections to create when growing the pool.  
spring.jta.bitronix.datasource.acquisition-interval=1 \# Time, in seconds, to wait before trying to acquire a connection again after an invalid connection was acquired.  
spring.jta.bitronix.datasource.acquisition-timeout=30 \# Timeout, in seconds, for acquiring connections from the pool.  
spring.jta.bitronix.datasource.allow-local-transactions=true \# Whether or not the transaction manager should allow mixing XA and non-XA transactions.  
spring.jta.bitronix.datasource.apply-transaction-timeout=false \# Whether or not the transaction timeout should be set on the XAResource when it is enlisted.  
spring.jta.bitronix.datasource.automatic-enlisting-enabled=true \# Whether or not resources should be enlisted and delisted automatically.  
spring.jta.bitronix.datasource.cursor-holdability= \# The default cursor holdability for connections.  
spring.jta.bitronix.datasource.defer-connection-release=true \# Whether or not the database can run many transactions on the same connection and supports transaction interleaving.  
spring.jta.bitronix.datasource.enable-jdbc4-connection-test= \# Whether or not Connection.isValid() is called when acquiring a connection from the pool.  
spring.jta.bitronix.datasource.ignore-recovery-failures=false \# Whether or not recovery failures should be ignored.  
spring.jta.bitronix.datasource.isolation-level= \# The default isolation level for connections.  
spring.jta.bitronix.datasource.local-auto-commit= \# The default auto-commit mode for local transactions.  
spring.jta.bitronix.datasource.login-timeout= \# Timeout, in seconds, for establishing a database connection.  
spring.jta.bitronix.datasource.max-idle-time=60 \# The time, in seconds, after which connections are cleaned up from the pool.  
spring.jta.bitronix.datasource.max-pool-size=10 \# The maximum size of the pool. 0 denotes no limit.  
spring.jta.bitronix.datasource.min-pool-size=0 \# The minimum size of the pool.  
spring.jta.bitronix.datasource.prepared-statement-cache-size=0 \# The target size of the prepared statement cache. 0 disables the cache.  
spring.jta.bitronix.datasource.share-transaction-connections=false \#  Whether or not connections in the ACCESSIBLE state can be shared within the context of a transaction.  
spring.jta.bitronix.datasource.test-query= \# SQL query or statement used to validate a connection before returning it.  
spring.jta.bitronix.datasource.two-pc-ordering-position=1 \# The position that this resource should take during two-phase commit (always first is Integer.MIN\_VALUE, always last is Integer.MAX\_VALUE).  
spring.jta.bitronix.datasource.unique-name=dataSource \# The unique name used to identify the resource during recovery.  
spring.jta.bitronix.datasource.use-tm-join=true Whether or not TMJOIN should be used when starting XAResources.  
spring.jta.bitronix.properties.allow-multiple-lrc=false \# Allow multiple LRC resources to be enlisted into the same transaction.  
spring.jta.bitronix.properties.asynchronous2-pc=false \# Enable asynchronously execution of two phase commit.  
spring.jta.bitronix.properties.background-recovery-interval-seconds=60 \# Interval in seconds at which to run the recovery process in the background.  
spring.jta.bitronix.properties.current-node-only-recovery=true \# Recover only the current node.  
spring.jta.bitronix.properties.debug-zero-resource-transaction=false \# Log the creation and commit call stacks of transactions executed without a single enlisted resource.  
spring.jta.bitronix.properties.default-transaction-timeout=60 \# Default transaction timeout in seconds.  
spring.jta.bitronix.properties.disable-jmx=false \# Enable JMX support.  
spring.jta.bitronix.properties.exception-analyzer= \# Set the fully qualified name of the exception analyzer implementation to use.  
spring.jta.bitronix.properties.filter-log-status=false \# Enable filtering of logs so that only mandatory logs are written.  
spring.jta.bitronix.properties.force-batching-enabled=true \#  Set if disk forces are batched.  
spring.jta.bitronix.properties.forced-write-enabled=true \# Set if logs are forced to disk.  
spring.jta.bitronix.properties.graceful-shutdown-interval=60 \# Maximum amount of seconds the TM will wait for transactions to get done before aborting them at shutdown time.  
spring.jta.bitronix.properties.jndi-transaction-synchronization-registry-name= \# JNDI name of the TransactionSynchronizationRegistry.  
spring.jta.bitronix.properties.jndi-user-transaction-name= \# JNDI name of the UserTransaction.  
spring.jta.bitronix.properties.journal=disk \# Name of the journal. Can be 'disk', 'null' or a class name.  
spring.jta.bitronix.properties.log-part1-filename=btm1.tlog \# Name of the first fragment of the journal.  
spring.jta.bitronix.properties.log-part2-filename=btm2.tlog \# Name of the second fragment of the journal.  
spring.jta.bitronix.properties.max-log-size-in-mb=2 \# Maximum size in megabytes of the journal fragments.  
spring.jta.bitronix.properties.resource-configuration-filename= \# ResourceLoader configuration file name.  
spring.jta.bitronix.properties.server-id= \# ASCII ID that must uniquely identify this TM instance. Default to the machine's IP address.  
spring.jta.bitronix.properties.skip-corrupted-logs=false \# Skip corrupted transactions log entries.  
spring.jta.bitronix.properties.warn-about-zero-resource-transaction=true \# Log a warning for transactions executed without a single enlisted resource.

\# NARAYANA (NarayanaProperties)  
spring.jta.narayana.default-timeout=60 \# Transaction timeout in seconds.  
spring.jta.narayana.expiry-scanners=com.arjuna.ats.internal.arjuna.recovery.ExpiredTransactionStatusManagerScanner \# Comma-separated list of expiry scanners.  
spring.jta.narayana.log-dir= \# Transaction object store directory.  
spring.jta.narayana.one-phase-commit=true \# Enable one phase commit optimisation.  
spring.jta.narayana.periodic-recovery-period=120 \# Interval in which periodic recovery scans are performed in seconds.  
spring.jta.narayana.recovery-backoff-period=10 \# Back off period between first and second phases of the recovery scan in seconds.  
spring.jta.narayana.recovery-db-pass= \# Database password to be used by recovery manager.  
spring.jta.narayana.recovery-db-user= \# Database username to be used by recovery manager.  
spring.jta.narayana.recovery-jms-pass= \# JMS password to be used by recovery manager.  
spring.jta.narayana.recovery-jms-user= \# JMS username to be used by recovery manager.  
spring.jta.narayana.recovery-modules= \# Comma-separated list of recovery modules.  
spring.jta.narayana.transaction-manager-id=1 \# Unique transaction manager id.  
spring.jta.narayana.xa-resource-orphan-filters= \# Comma-separated list of orphan filters.

\# EMBEDDED MONGODB (EmbeddedMongoProperties)  
spring.mongodb.embedded.features=SYNC\_DELAY \# Comma-separated list of features to enable.  
spring.mongodb.embedded.storage.database-dir= \# Directory used for data storage.  
spring.mongodb.embedded.storage.oplog-size= \# Maximum size of the oplog in megabytes.  
spring.mongodb.embedded.storage.repl-set-name= \# Name of the replica set.  
spring.mongodb.embedded.version=2.6.10 \# Version of Mongo to use.

\# REDIS (RedisProperties)  
spring.redis.cluster.max-redirects= \# Maximum number of redirects to follow when executing commands across the cluster.  
spring.redis.cluster.nodes= \# Comma-separated list of "host:port" pairs to bootstrap from.  
spring.redis.database=0 \# Database index used by the connection factory.  
spring.redis.url= \# Connection URL, will override host, port and password (user will be ignored), e.g. redis://user:password@example.com:6379  
spring.redis.host=localhost \# Redis server host.  
spring.redis.password= \# Login password of the redis server.  
spring.redis.ssl=false \# Enable SSL support.  
spring.redis.pool.max-active=8 \# Max number of connections that can be allocated by the pool at a given time. Use a negative value for no limit.  
spring.redis.pool.max-idle=8 \# Max number of "idle" connections in the pool. Use a negative value to indicate an unlimited number of idle connections.  
spring.redis.pool.max-wait=-1 \# Maximum amount of time (in milliseconds) a connection allocation should block before throwing an exception when the pool is exhausted. Use a negative value to block indefinitely.  
spring.redis.pool.min-idle=0 \# Target for the minimum number of idle connections to maintain in the pool. This setting only has an effect if it is positive.  
spring.redis.port=6379 \# Redis server port.  
spring.redis.sentinel.master= \# Name of Redis server.  
spring.redis.sentinel.nodes= \# Comma-separated list of host:port pairs.  
spring.redis.timeout=0 \# Connection timeout in milliseconds.

\# TRANSACTION (TransactionProperties)  
spring.transaction.default-timeout= \# Default transaction timeout in seconds.  
spring.transaction.rollback-on-commit-failure= \# Perform the rollback on commit failures.

\# ----------------------------------------  
\# INTEGRATION PROPERTIES  
\# ----------------------------------------

\# ACTIVEMQ (ActiveMQProperties)  
spring.activemq.broker-url= \# URL of the ActiveMQ broker. Auto-generated by default. For instance \`tcp://localhost:61616\`  
spring.activemq.in-memory=true \# Specify if the default broker URL should be in memory. Ignored if an explicit broker has been specified.  
spring.activemq.password= \# Login password of the broker.  
spring.activemq.user= \# Login user of the broker.  
spring.activemq.packages.trust-all=false \# Trust all packages.  
spring.activemq.packages.trusted= \# Comma-separated list of specific packages to trust (when not trusting all packages).  
spring.activemq.pool.configuration.\*= \# See PooledConnectionFactory.  
spring.activemq.pool.enabled=false \# Whether a PooledConnectionFactory should be created instead of a regular ConnectionFactory.  
spring.activemq.pool.expiry-timeout=0 \# Connection expiration timeout in milliseconds.  
spring.activemq.pool.idle-timeout=30000 \# Connection idle timeout in milliseconds.  
spring.activemq.pool.max-connections=1 \# Maximum number of pooled connections.

\# ARTEMIS (ArtemisProperties)  
spring.artemis.embedded.cluster-password= \# Cluster password. Randomly generated on startup by default.  
spring.artemis.embedded.data-directory= \# Journal file directory. Not necessary if persistence is turned off.  
spring.artemis.embedded.enabled=true \# Enable embedded mode if the Artemis server APIs are available.  
spring.artemis.embedded.persistent=false \# Enable persistent store.  
spring.artemis.embedded.queues= \# Comma-separated list of queues to create on startup.  
spring.artemis.embedded.server-id= \# Server id. By default, an auto-incremented counter is used.  
spring.artemis.embedded.topics= \# Comma-separated list of topics to create on startup.  
spring.artemis.host=localhost \# Artemis broker host.  
spring.artemis.mode= \# Artemis deployment mode, auto-detected by default.  
spring.artemis.password= \# Login password of the broker.  
spring.artemis.port=61616 \# Artemis broker port.  
spring.artemis.user= \# Login user of the broker.

\# SPRING BATCH (BatchProperties)  
spring.batch.initializer.enabled= \# Create the required batch tables on startup if necessary. Enabled automatically if no custom table prefix is set or if a custom schema is configured.  
spring.batch.job.enabled=true \# Execute all Spring Batch jobs in the context on startup.  
spring.batch.job.names= \# Comma-separated list of job names to execute on startup (For instance \`job1,job2\`). By default, all Jobs found in the context are executed.  
spring.batch.schema=classpath:org/springframework/batch/core/schema-@@platform@@.sql \# Path to the SQL file to use to initialize the database schema.  
spring.batch.table-prefix= \# Table prefix for all the batch meta-data tables.

\# JMS (JmsProperties)  
spring.jms.jndi-name= \# Connection factory JNDI name. When set, takes precedence to others connection factory auto-configurations.  
spring.jms.listener.acknowledge-mode= \# Acknowledge mode of the container. By default, the listener is transacted with automatic acknowledgment.  
spring.jms.listener.auto-startup=true \# Start the container automatically on startup.  
spring.jms.listener.concurrency= \# Minimum number of concurrent consumers.  
spring.jms.listener.max-concurrency= \# Maximum number of concurrent consumers.  
spring.jms.pub-sub-domain=false \# Specify if the default destination type is topic.  
spring.jms.template.default-destination= \# Default destination to use on send/receive operations that do not have a destination parameter.  
spring.jms.template.delivery-delay= \# Delivery delay to use for send calls in milliseconds.  
spring.jms.template.delivery-mode= \# Delivery mode. Enable QoS when set.  
spring.jms.template.priority= \# Priority of a message when sending. Enable QoS when set.  
spring.jms.template.qos-enabled= \# Enable explicit QoS when sending a message.  
spring.jms.template.receive-timeout= \# Timeout to use for receive calls in milliseconds.  
spring.jms.template.time-to-live= \# Time-to-live of a message when sending in milliseconds. Enable QoS when set.

\# APACHE KAFKA (KafkaProperties)  
spring.kafka.bootstrap-servers= \# Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.  
spring.kafka.client-id= \# Id to pass to the server when making requests; used for server-side logging.  
spring.kafka.consumer.auto-commit-interval= \# Frequency in milliseconds that the consumer offsets are auto-committed to Kafka if 'enable.auto.commit' true.  
spring.kafka.consumer.auto-offset-reset= \# What to do when there is no initial offset in Kafka or if the current offset does not exist any more on the server.  
spring.kafka.consumer.bootstrap-servers= \# Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.  
spring.kafka.consumer.client-id= \# Id to pass to the server when making requests; used for server-side logging.  
spring.kafka.consumer.enable-auto-commit= \# If true the consumer's offset will be periodically committed in the background.  
spring.kafka.consumer.fetch-max-wait= \# Maximum amount of time in milliseconds the server will block before answering the fetch request if there isn't sufficient data to immediately satisfy the requirement given by "fetch.min.bytes".  
spring.kafka.consumer.fetch-min-size= \# Minimum amount of data the server should return for a fetch request in bytes.  
spring.kafka.consumer.group-id= \# Unique string that identifies the consumer group this consumer belongs to.  
spring.kafka.consumer.heartbeat-interval= \# Expected time in milliseconds between heartbeats to the consumer coordinator.  
spring.kafka.consumer.key-deserializer= \# Deserializer class for keys.  
spring.kafka.consumer.max-poll-records= \# Maximum number of records returned in a single call to poll().  
spring.kafka.consumer.value-deserializer= \# Deserializer class for values.  
spring.kafka.listener.ack-count= \# Number of records between offset commits when ackMode is "COUNT" or "COUNT\_TIME".  
spring.kafka.listener.ack-mode= \# Listener AckMode; see the spring-kafka documentation.  
spring.kafka.listener.ack-time= \# Time in milliseconds between offset commits when ackMode is "TIME" or "COUNT\_TIME".  
spring.kafka.listener.concurrency= \# Number of threads to run in the listener containers.  
spring.kafka.listener.poll-timeout= \# Timeout in milliseconds to use when polling the consumer.  
spring.kafka.producer.acks= \# Number of acknowledgments the producer requires the leader to have received before considering a request complete.  
spring.kafka.producer.batch-size= \# Number of records to batch before sending.  
spring.kafka.producer.bootstrap-servers= \# Comma-delimited list of host:port pairs to use for establishing the initial connection to the Kafka cluster.  
spring.kafka.producer.buffer-memory= \# Total bytes of memory the producer can use to buffer records waiting to be sent to the server.  
spring.kafka.producer.client-id= \# Id to pass to the server when making requests; used for server-side logging.  
spring.kafka.producer.compression-type= \# Compression type for all data generated by the producer.  
spring.kafka.producer.key-serializer= \# Serializer class for keys.  
spring.kafka.producer.retries= \# When greater than zero, enables retrying of failed sends.  
spring.kafka.producer.value-serializer= \# Serializer class for values.  
spring.kafka.properties.\*= \# Additional properties used to configure the client.  
spring.kafka.ssl.key-password= \# Password of the private key in the key store file.  
spring.kafka.ssl.keystore-location= \# Location of the key store file.  
spring.kafka.ssl.keystore-password= \# Store password for the key store file.  
spring.kafka.ssl.truststore-location= \# Location of the trust store file.  
spring.kafka.ssl.truststore-password= \# Store password for the trust store file.  
spring.kafka.template.default-topic= \# Default topic to which messages will be sent.

\# RABBIT (RabbitProperties)  
spring.rabbitmq.addresses= \# Comma-separated list of addresses to which the client should connect.  
spring.rabbitmq.cache.channel.checkout-timeout= \# Number of milliseconds to wait to obtain a channel if the cache size has been reached.  
spring.rabbitmq.cache.channel.size= \# Number of channels to retain in the cache.  
spring.rabbitmq.cache.connection.mode=channel \# Connection factory cache mode.  
spring.rabbitmq.cache.connection.size= \# Number of connections to cache.  
spring.rabbitmq.connection-timeout= \# Connection timeout, in milliseconds; zero for infinite.  
spring.rabbitmq.dynamic=true \# Create an AmqpAdmin bean.  
spring.rabbitmq.host=localhost \# RabbitMQ host.  
spring.rabbitmq.listener.acknowledge-mode= \# Acknowledge mode of container.  
spring.rabbitmq.listener.auto-startup=true \# Start the container automatically on startup.  
spring.rabbitmq.listener.concurrency= \# Minimum number of consumers.  
spring.rabbitmq.listener.default-requeue-rejected= \# Whether or not to requeue delivery failures; default \`true\`.  
spring.rabbitmq.listener.idle-event-interval= \# How often idle container events should be published in milliseconds.  
spring.rabbitmq.listener.max-concurrency= \# Maximum number of consumers.  
spring.rabbitmq.listener.prefetch= \# Number of messages to be handled in a single request. It should be greater than or equal to the transaction size (if used).  
spring.rabbitmq.listener.retry.enabled=false \# Whether or not publishing retries are enabled.  
spring.rabbitmq.listener.retry.initial-interval=1000 \# Interval between the first and second attempt to deliver a message.  
spring.rabbitmq.listener.retry.max-attempts=3 \# Maximum number of attempts to deliver a message.  
spring.rabbitmq.listener.retry.max-interval=10000 \# Maximum interval between attempts.  
spring.rabbitmq.listener.retry.multiplier=1.0 \# A multiplier to apply to the previous delivery retry interval.  
spring.rabbitmq.listener.retry.stateless=true \# Whether or not retry is stateless or stateful.  
spring.rabbitmq.listener.transaction-size= \# Number of messages to be processed in a transaction. For best results it should be less than or equal to the prefetch count.  
spring.rabbitmq.password= \# Login to authenticate against the broker.  
spring.rabbitmq.port=5672 \# RabbitMQ port.  
spring.rabbitmq.publisher-confirms=false \# Enable publisher confirms.  
spring.rabbitmq.publisher-returns=false \# Enable publisher returns.  
spring.rabbitmq.requested-heartbeat= \# Requested heartbeat timeout, in seconds; zero for none.  
spring.rabbitmq.ssl.enabled=false \# Enable SSL support.  
spring.rabbitmq.ssl.key-store= \# Path to the key store that holds the SSL certificate.  
spring.rabbitmq.ssl.key-store-password= \# Password used to access the key store.  
spring.rabbitmq.ssl.trust-store= \# Trust store that holds SSL certificates.  
spring.rabbitmq.ssl.trust-store-password= \# Password used to access the trust store.  
spring.rabbitmq.ssl.algorithm= \# SSL algorithm to use. By default configure by the rabbit client library.  
spring.rabbitmq.template.mandatory=false \# Enable mandatory messages.  
spring.rabbitmq.template.receive-timeout=0 \# Timeout for \`receive()\` methods.  
spring.rabbitmq.template.reply-timeout=5000 \# Timeout for \`sendAndReceive()\` methods.  
spring.rabbitmq.template.retry.enabled=false \# Set to true to enable retries in the \`RabbitTemplate\`.  
spring.rabbitmq.template.retry.initial-interval=1000 \# Interval between the first and second attempt to publish a message.  
spring.rabbitmq.template.retry.max-attempts=3 \# Maximum number of attempts to publish a message.  
spring.rabbitmq.template.retry.max-interval=10000 \# Maximum number of attempts to publish a message.  
spring.rabbitmq.template.retry.multiplier=1.0 \# A multiplier to apply to the previous publishing retry interval.  
spring.rabbitmq.username= \# Login user to authenticate to the broker.  
spring.rabbitmq.virtual-host= \# Virtual host to use when connecting to the broker.

\# ----------------------------------------  
\# ACTUATOR PROPERTIES  
\# ----------------------------------------

\# ENDPOINTS (AbstractEndpoint subclasses)  
endpoints.enabled=true \# Enable endpoints.  
endpoints.sensitive= \# Default endpoint sensitive setting.  
endpoints.actuator.enabled=true \# Enable the endpoint.  
endpoints.actuator.path= \# Endpoint URL path.  
endpoints.actuator.sensitive=false \# Enable security on the endpoint.  
endpoints.auditevents.enabled= \# Enable the endpoint.  
endpoints.auditevents.path= \# Endpoint path.  
endpoints.auditevents.sensitive=false \# Enable security on the endpoint.  
endpoints.autoconfig.enabled= \# Enable the endpoint.  
endpoints.autoconfig.id= \# Endpoint identifier.  
endpoints.autoconfig.path= \# Endpoint path.  
endpoints.autoconfig.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.beans.enabled= \# Enable the endpoint.  
endpoints.beans.id= \# Endpoint identifier.  
endpoints.beans.path= \# Endpoint path.  
endpoints.beans.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.configprops.enabled= \# Enable the endpoint.  
endpoints.configprops.id= \# Endpoint identifier.  
endpoints.configprops.keys-to-sanitize=password,secret,key,token,.\*credentials.\*,vcap\_services \# Keys that should be sanitized. Keys can be simple strings that the property ends with or regex expressions.  
endpoints.configprops.path= \# Endpoint path.  
endpoints.configprops.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.docs.curies.enabled=false \# Enable the curie generation.  
endpoints.docs.enabled=true \# Enable actuator docs endpoint.  
endpoints.docs.path=/docs \#  
endpoints.docs.sensitive=false \#  
endpoints.dump.enabled= \# Enable the endpoint.  
endpoints.dump.id= \# Endpoint identifier.  
endpoints.dump.path= \# Endpoint path.  
endpoints.dump.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.env.enabled= \# Enable the endpoint.  
endpoints.env.id= \# Endpoint identifier.  
endpoints.env.keys-to-sanitize=password,secret,key,token,.\*credentials.\*,vcap\_services \# Keys that should be sanitized. Keys can be simple strings that the property ends with or regex expressions.  
endpoints.env.path= \# Endpoint path.  
endpoints.env.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.flyway.enabled= \# Enable the endpoint.  
endpoints.flyway.id= \# Endpoint identifier.  
endpoints.flyway.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.health.enabled= \# Enable the endpoint.  
endpoints.health.id= \# Endpoint identifier.  
endpoints.health.mapping.\*= \# Mapping of health statuses to HttpStatus codes. By default, registered health statuses map to sensible defaults (i.e. UP maps to 200).  
endpoints.health.path= \# Endpoint path.  
endpoints.health.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.health.time-to-live=1000 \# Time to live for cached result, in milliseconds.  
endpoints.heapdump.enabled= \# Enable the endpoint.  
endpoints.heapdump.path= \# Endpoint path.  
endpoints.heapdump.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.hypermedia.enabled=false \# Enable hypermedia support for endpoints.  
endpoints.info.enabled= \# Enable the endpoint.  
endpoints.info.id= \# Endpoint identifier.  
endpoints.info.path= \# Endpoint path.  
endpoints.info.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.jolokia.enabled=true \# Enable Jolokia endpoint.  
endpoints.jolokia.path=/jolokia \# Endpoint URL path.  
endpoints.jolokia.sensitive=true \# Enable security on the endpoint.  
endpoints.liquibase.enabled= \# Enable the endpoint.  
endpoints.liquibase.id= \# Endpoint identifier.  
endpoints.liquibase.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.logfile.enabled=true \# Enable the endpoint.  
endpoints.logfile.external-file= \# External Logfile to be accessed.  
endpoints.logfile.path=/logfile \# Endpoint URL path.  
endpoints.logfile.sensitive=true \# Enable security on the endpoint.  
endpoints.loggers.enabled=true \# Enable the endpoint.  
endpoints.loggers.id= \# Endpoint identifier.  
endpoints.loggers.path=/logfile \# Endpoint path.  
endpoints.loggers.sensitive=true \# Mark if the endpoint exposes sensitive information.  
endpoints.mappings.enabled= \# Enable the endpoint.  
endpoints.mappings.id= \# Endpoint identifier.  
endpoints.mappings.path= \# Endpoint path.  
endpoints.mappings.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.metrics.enabled= \# Enable the endpoint.  
endpoints.metrics.filter.enabled=true \# Enable the metrics servlet filter.  
endpoints.metrics.filter.gauge-submissions=merged \# Http filter gauge submissions (merged, per-http-method)  
endpoints.metrics.filter.counter-submissions=merged \# Http filter counter submissions (merged, per-http-method)  
endpoints.metrics.id= \# Endpoint identifier.  
endpoints.metrics.path= \# Endpoint path.  
endpoints.metrics.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.shutdown.enabled= \# Enable the endpoint.  
endpoints.shutdown.id= \# Endpoint identifier.  
endpoints.shutdown.path= \# Endpoint path.  
endpoints.shutdown.sensitive= \# Mark if the endpoint exposes sensitive information.  
endpoints.trace.enabled= \# Enable the endpoint.  
endpoints.trace.id= \# Endpoint identifier.  
endpoints.trace.path= \# Endpoint path.  
endpoints.trace.sensitive= \# Mark if the endpoint exposes sensitive information.

\# ENDPOINTS CORS CONFIGURATION (EndpointCorsProperties)  
endpoints.cors.allow-credentials= \# Set whether credentials are supported. When not set, credentials are not supported.  
endpoints.cors.allowed-headers= \# Comma-separated list of headers to allow in a request. '\*' allows all headers.  
endpoints.cors.allowed-methods=GET \# Comma-separated list of methods to allow. '\*' allows all methods.  
endpoints.cors.allowed-origins= \# Comma-separated list of origins to allow. '\*' allows all origins. When not set, CORS support is disabled.  
endpoints.cors.exposed-headers= \# Comma-separated list of headers to include in a response.  
endpoints.cors.max-age=1800 \# How long, in seconds, the response from a pre-flight request can be cached by clients.

\# JMX ENDPOINT (EndpointMBeanExportProperties)  
endpoints.jmx.domain= \# JMX domain name. Initialized with the value of 'spring.jmx.default-domain' if set.  
endpoints.jmx.enabled=true \# Enable JMX export of all endpoints.  
endpoints.jmx.static-names= \# Additional static properties to append to all ObjectNames of MBeans representing Endpoints.  
endpoints.jmx.unique-names=false \# Ensure that ObjectNames are modified in case of conflict.

\# JOLOKIA (JolokiaProperties)  
jolokia.config.\*= \# See Jolokia manual

\# MANAGEMENT HTTP SERVER (ManagementServerProperties)  
management.add-application-context-header=true \# Add the "X-Application-Context" HTTP header in each response.  
management.address= \# Network address that the management endpoints should bind to.  
management.context-path= \# Management endpoint context-path. For instance \`/actuator\`  
management.cloudfoundry.enabled= \# Enable extended Cloud Foundry actuator endpoints  
management.cloudfoundry.skip-ssl-validation= \# Skip SSL verification for Cloud Foundry actuator endpoint security calls  
management.port= \# Management endpoint HTTP port. Uses the same port as the application by default. Configure a different port to use management-specific SSL.  
management.security.enabled=true \# Enable security.  
management.security.roles=ACTUATOR \# Comma-separated list of roles that can access the management endpoint.  
management.security.sessions=stateless \# Session creating policy to use (always, never, if\_required, stateless).  
management.ssl.ciphers= \# Supported SSL ciphers. Requires a custom management.port.  
management.ssl.client-auth= \# Whether client authentication is wanted ("want") or needed ("need"). Requires a trust store. Requires a custom management.port.  
management.ssl.enabled= \# Enable SSL support. Requires a custom management.port.  
management.ssl.enabled-protocols= \# Enabled SSL protocols. Requires a custom management.port.  
management.ssl.key-alias= \# Alias that identifies the key in the key store. Requires a custom management.port.  
management.ssl.key-password= \# Password used to access the key in the key store. Requires a custom management.port.  
management.ssl.key-store= \# Path to the key store that holds the SSL certificate (typically a jks file). Requires a custom management.port.  
management.ssl.key-store-password= \# Password used to access the key store. Requires a custom management.port.  
management.ssl.key-store-provider= \# Provider for the key store. Requires a custom management.port.  
management.ssl.key-store-type= \# Type of the key store. Requires a custom management.port.  
management.ssl.protocol=TLS \# SSL protocol to use. Requires a custom management.port.  
management.ssl.trust-store= \# Trust store that holds SSL certificates. Requires a custom management.port.  
management.ssl.trust-store-password= \# Password used to access the trust store. Requires a custom management.port.  
management.ssl.trust-store-provider= \# Provider for the trust store. Requires a custom management.port.  
management.ssl.trust-store-type= \# Type of the trust store. Requires a custom management.port.

\# HEALTH INDICATORS  
management.health.db.enabled=true \# Enable database health check.  
management.health.cassandra.enabled=true \# Enable cassandra health check.  
management.health.couchbase.enabled=true \# Enable couchbase health check.  
management.health.defaults.enabled=true \# Enable default health indicators.  
management.health.diskspace.enabled=true \# Enable disk space health check.  
management.health.diskspace.path= \# Path used to compute the available disk space.  
management.health.diskspace.threshold=0 \# Minimum disk space that should be available, in bytes.  
management.health.elasticsearch.enabled=true \# Enable elasticsearch health check.  
management.health.elasticsearch.indices= \# Comma-separated index names.  
management.health.elasticsearch.response-timeout=100 \# The time, in milliseconds, to wait for a response from the cluster.  
management.health.jms.enabled=true \# Enable JMS health check.  
management.health.ldap.enabled=true \# Enable LDAP health check.  
management.health.mail.enabled=true \# Enable Mail health check.  
management.health.mongo.enabled=true \# Enable MongoDB health check.  
management.health.rabbit.enabled=true \# Enable RabbitMQ health check.  
management.health.redis.enabled=true \# Enable Redis health check.  
management.health.solr.enabled=true \# Enable Solr health check.  
management.health.status.order=DOWN, OUT\_OF\_SERVICE, UP, UNKNOWN \# Comma-separated list of health statuses in order of severity.

\# INFO CONTRIBUTORS (InfoContributorProperties)  
management.info.build.enabled=true \# Enable build info.  
management.info.defaults.enabled=true \# Enable default info contributors.  
management.info.env.enabled=true \# Enable environment info.  
management.info.git.enabled=true \# Enable git info.  
management.info.git.mode=simple \# Mode to use to expose git information.

\# REMOTE SHELL (ShellProperties)  
management.shell.auth.type=simple \# Authentication type. Auto-detected according to the environment.  
management.shell.auth.jaas.domain=my-domain \# JAAS domain.  
management.shell.auth.key.path= \# Path to the authentication key. This should point to a valid ".pem" file.  
management.shell.auth.simple.user.name=user \# Login user.  
management.shell.auth.simple.user.password= \# Login password.  
management.shell.auth.spring.roles=ACTUATOR \# Comma-separated list of required roles to login to the CRaSH console.  
management.shell.command-path-patterns=classpath\*:/commands/\*\*,classpath\*:/crash/commands/\*\* \# Patterns to use to look for commands.  
management.shell.command-refresh-interval=-1 \# Scan for changes and update the command if necessary (in seconds).  
management.shell.config-path-patterns=classpath\*:/crash/\* \# Patterns to use to look for configurations.  
management.shell.disabled-commands=jpa\*,jdbc\*,jndi\* \# Comma-separated list of commands to disable.  
management.shell.disabled-plugins= \# Comma-separated list of plugins to disable. Certain plugins are disabled by default based on the environment.  
management.shell.ssh.auth-timeout = \# Number of milliseconds after user will be prompted to login again.  
management.shell.ssh.enabled=true \# Enable CRaSH SSH support.  
management.shell.ssh.idle-timeout = \# Number of milliseconds after which unused connections are closed.  
management.shell.ssh.key-path= \# Path to the SSH server key.  
management.shell.ssh.port=2000 \# SSH port.  
management.shell.telnet.enabled=false \# Enable CRaSH telnet support. Enabled by default if the TelnetPlugin is  available.  
management.shell.telnet.port=5000 \# Telnet port.

\# TRACING (TraceProperties)  
management.trace.include=request-headers,response-headers,cookies,errors \# Items to be included in the trace.

\# METRICS EXPORT (MetricExportProperties)  
spring.metrics.export.aggregate.key-pattern= \# Pattern that tells the aggregator what to do with the keys from the source repository.  
spring.metrics.export.aggregate.prefix= \# Prefix for global repository if active.  
spring.metrics.export.delay-millis=5000 \# Delay in milliseconds between export ticks. Metrics are exported to external sources on a schedule with this delay.  
spring.metrics.export.enabled=true \# Flag to enable metric export (assuming a MetricWriter is available).  
spring.metrics.export.excludes= \# List of patterns for metric names to exclude. Applied after the includes.  
spring.metrics.export.includes= \# List of patterns for metric names to include.  
spring.metrics.export.redis.key=keys.spring.metrics \# Key for redis repository export (if active).  
spring.metrics.export.redis.prefix=spring.metrics \# Prefix for redis repository if active.  
spring.metrics.export.send-latest= \# Flag to switch off any available optimizations based on not exporting unchanged metric values.  
spring.metrics.export.statsd.host= \# Host of a statsd server to receive exported metrics.  
spring.metrics.export.statsd.port=8125 \# Port of a statsd server to receive exported metrics.  
spring.metrics.export.statsd.prefix= \# Prefix for statsd exported metrics.  
spring.metrics.export.triggers.\*= \# Specific trigger properties per MetricWriter bean name.  
\# ----------------------------------------  
\# DEVTOOLS PROPERTIES  
\# ----------------------------------------  
\# DEVTOOLS (DevToolsProperties)  
spring.devtools.livereload.enabled=true \# Enable a livereload.com compatible server.  
spring.devtools.livereload.port=35729 \# Server port.  
spring.devtools.restart.additional-exclude= \# Additional patterns that should be excluded from triggering a full restart.  
spring.devtools.restart.additional-paths= \# Additional paths to watch for changes.  
spring.devtools.restart.enabled=true \# Enable automatic restart.  
spring.devtools.restart.exclude=META-INF/maven/\*\*,META-INF/resources/\*\*,resources/\*\*,static/\*\*,public/\*\*,templates/\*\*,\*\*/\*Test.class,\*\*/\*Tests.class,git.properties \# Patterns that should be excluded from triggering a full restart.  
spring.devtools.restart.poll-interval=1000 \# Amount of time (in milliseconds) to wait between polling for classpath changes.  
spring.devtools.restart.quiet-period=400 \# Amount of quiet time (in milliseconds) required without any classpath changes before a restart is triggered.  
spring.devtools.restart.trigger-file= \# Name of a specific file that when changed will trigger the restart check. If not specified any classpath file change will trigger the restart.

\# REMOTE DEVTOOLS (RemoteDevToolsProperties)  
spring.devtools.remote.context-path=/.~~spring-boot!~ \# Context path used to handle the remote connection.  
spring.devtools.remote.debug.enabled=true \# Enable remote debug support.  
spring.devtools.remote.debug.local-port=8000 \# Local remote debug server port.  
spring.devtools.remote.proxy.host= \# The host of the proxy to use to connect to the remote application.  
spring.devtools.remote.proxy.port= \# The port of the proxy to use to connect to the remote application.  
spring.devtools.remote.restart.enabled=true \# Enable remote restart.  
spring.devtools.remote.secret= \# A shared secret required to establish a connection (required to enable remote support).  
spring.devtools.remote.secret-header-name=X-AUTH-TOKEN \# HTTP header used to transfer the shared secret  
\# ----------------------------------------  
\# TESTING PROPERTIES  
\# ----------------------------------------  
spring.test.database.replace=any \# Type of existing DataSource to replace.  
spring.test.mockmvc.print=default