远程调试树莓PI

比眉伴天荒 2022-01-05 14:25 135阅读 0赞

非官方

参考 http://linuxtortures.blogspot.jp/2012/06/cross-compiling-and-cross-debugging-c.html

注意：

建立 /etc/apt/sources.list.d/emdebian.list, containing:

deb [http://www.emdebian.org/debian][http_www.emdebian.org_debian] squeeze main  
　　　　deb [http://ftp.us.debian.org/debian][http_ftp.us.debian.org_debian] squeeze main contrib non-free

sudo apt-get update

遇到密钥问题

例如导入密钥为AED4B06F473041FA

gpg --keyserver pgpkeys.mit.edu --recv-key AED4B06F473041FA

gpg -a --export AED4B06F473041FA | sudo apt-key add -

官方出品：

参考 http://hertaville.com/2012/09/28/development-environment-raspberry-pi-cross-compiler/

安装交叉编译环境

git clone https://github.com/raspberrypi/tools.git

![Image 1][]

新建c++工程

![Screenshot-C_Project_.png][]

![Figure 4 Configure the Cross GCC path and prefix][]

![Figure 6. HelloWorld program successfully compiled for Raspberry Pi.!!!][Figure 6. HelloWorld program successfully compiled for Raspberry Pi.]

![Figure 7. Remote system view][]

![Figure 8. Creating a New Connection][]

![Figure 9. Select remote system type][]

![Figure 10. Remote SSH only system connection][]

![Figure 11. Starting an SSH terminal in Eclipse][]

![Figure 12. Launch Terminal][]

![Figure 13. Running the HelloRPiWorld binary on the Raspberry Pi via an eclipse's SSH terminal][Figure 13. Running the HelloRPiWorld binary on the Raspberry Pi via an eclipse_s SSH terminal]

debug

![Image 1][]

转载于:https://www.cnblogs.com/yuliyang/p/4023758.html

[http_www.emdebian.org_debian]: http://www.emdebian.org/debian
[http_ftp.us.debian.org_debian]: http://ftp.us.debian.org/debian
[Image 1]: 
[Screenshot-C_Project_.png]: http://4.bp.blogspot.com/-z0cvRmdpcU0/T-TlE_KqG3I/AAAAAAAAASM/R-73_Sw4StY/s400/Screenshot-C+++Project+.png
[Figure 4 Configure the Cross GCC path and prefix]: http://hertaville.com/wp-content/uploads/2012/09/cc4.png
[Figure 6. HelloWorld program successfully compiled for Raspberry Pi.]: http://hertaville.com/wp-content/uploads/2012/09/cc6.png
[Figure 7. Remote system view]: http://hertaville.com/wp-content/uploads/2012/09/cc7.png
[Figure 8. Creating a New Connection]: http://hertaville.com/wp-content/uploads/2012/09/cc8.png
[Figure 9. Select remote system type]: http://hertaville.com/wp-content/uploads/2012/09/cc9.png
[Figure 10. Remote SSH only system connection]: http://hertaville.com/wp-content/uploads/2012/09/cc10.png
[Figure 11. Starting an SSH terminal in Eclipse]: http://hertaville.com/wp-content/uploads/2012/09/cc11.png
[Figure 12. Launch Terminal]: http://hertaville.com/wp-content/uploads/2012/09/cc12.png
[Figure 13. Running the HelloRPiWorld binary on the Raspberry Pi via an eclipse_s SSH terminal]: http://hertaville.com/wp-content/uploads/2012/09/cc13.png