[Docker学习笔记] 创建容器常见选项

墨蓝 2021-11-06 01:20 280阅读 0赞

1）docker container run，-i 交互式，-t 创建一个伪终端，-d 后台运行

[root@localhost ~]# docker container run -itd --name bs busybox
    6cfa0a43ba1b393d2f5f086ad59f662e0b6bb293d80c3a3d6bdf8d1d2ff7255c
    [root@localhost ~]# docker ps
    CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
    6cfa0a43ba1b        busybox             "sh"                4 seconds ago       Up 2 seconds                            bs
    [root@localhost ~]#

2）docker container attach 进入容器再退出容器会停；按 Ctrl+p+q 退出则会继续运行。

使用 docker container exec -it <container id | container name> 进入容器终端再退出，不会停止运行。

[root@localhost ~]# docker container attach 6cfa0a43ba1b
    / # ls
    bin   dev   etc   home  proc  root  sys   tmp   usr   var
    / # exit
    [root@localhost ~]# docker container attach bs
    You cannot attach to a stopped container, start it first
    [root@localhost ~]# docker container start bs
    bs
    [root@localhost ~]# ls
    anaconda-ks.cfg
    [root@localhost ~]# docker container attach bs
    / # ls
    bin   dev   etc   home  proc  root  sys   tmp   usr   var
    / # read escape sequence
    [root@localhost ~]# docker container exec -it bs sh
    / # exit
    [root@localhost ~]# docker ps
    CONTAINER ID        IMAGE               COMMAND             CREATED             STATUS              PORTS               NAMES
    6cfa0a43ba1b        busybox             "sh"                About an hour ago   Up About a minute                       bs
    [root@localhost ~]#

3）容器和宿主机的一些联系

第一，关于IP地址

[root@localhost ~]# ip addr
    ...(skipped)...
    3: docker0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default
        link/ether 02:42:ba:15:f7:99 brd ff:ff:ff:ff:ff:ff
        inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0
           valid_lft forever preferred_lft forever
        inet6 fe80::42:baff:fe15:f799/64 scope link
           valid_lft forever preferred_lft forever
    ...(skipped)...
    [root@localhost ~]#
    [root@localhost ~]# docker container attach 6cfa0a43ba1b
    / # ls
    bin   dev   etc   home  proc  root  sys   tmp   usr   var
    / # ifconfig
    eth0      Link encap:Ethernet  HWaddr 02:42:AC:11:00:02
              inet addr:172.17.0.2  Bcast:172.17.255.255  Mask:255.255.0.0
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:16 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:1312 (1.2 KiB)  TX bytes:0 (0.0 B)
    
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              UP LOOPBACK RUNNING  MTU:65536  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)

第二 ，每次重启容器，会重新挂载以下三个文件

[root@localhost ~]# docker container attach bs
    / # mount
    rootfs on / type rootfs (rw)
    overlay on / type overlay 
    ...(skipped)...
    /dev/mapper/centos-root on /etc/resolv.conf type xfs (rw,seclabel,relatime,attr2,inode64,noquota)
    /dev/mapper/centos-root on /etc/hostname type xfs (rw,seclabel,relatime,attr2,inode64,noquota)
    /dev/mapper/centos-root on /etc/hosts type xfs (rw,seclabel,relatime,attr2,inode64,noquota)
    ...(skipped)...
    / # cat /etc/resolv.conf
    # Generated by NetworkManager
    nameserver 114.114.114.114
    / # cat /etc/hostname
    6cfa0a43ba1b
    / # cat /etc/hosts
    127.0.0.1       localhost
    ::1     localhost ip6-localhost ip6-loopback
    fe00::0 ip6-localnet
    ff00::0 ip6-mcastprefix
    ff02::1 ip6-allnodes
    ff02::2 ip6-allrouters
    172.17.0.2      6cfa0a43ba1b
    / #

4）docker container run，-e 起容器的时候传入变量

[root@localhost ~]# docker container run -itd -e a=666 --name bs1 busybox
    d8758dd0bd0d18047616680decedb25021037430ddb312e707e3bae5f7dad442
    [root@localhost ~]# docker exec -it bs1 sh
    / # echo $a
    666

5）docker container run，-p 起容器的时候做端口映射，例如将容器的80端口转到宿主机的8080端口

[root@localhost ~]# docker container run -itd -p 8080:80 --name nginx01 nginx
    b83f2dc64a57b045ae8397bcafd5a9308f4e0c4d3a982e69b630b3d44f84743d
    [root@localhost ~]# docker ps | egrep 'CONTAINER|nginx01'
    CONTAINER ID        IMAGE               COMMAND                  CREATED             STATUS              PORTS                  NAMES
    b83f2dc64a57        nginx               "nginx -g 'daemon of…"   36 seconds ago      Up 35 seconds       0.0.0.0:8080->80/tcp   nginx01
    [root@localhost ~]#

打开浏览器，url输入 <宿主机地址>:8080，会进入如下页面

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3d5X2hoeHg_size_16_color_FFFFFF_t_70][]

6）docker logs <container name | container ID> 查看容器控制台输出；输出也会存储到宿主机的 /var/lib/docker/containers/<容器完整ID> 下的 json 文件。注：有时候空间不够可以看看这个json文件是不是太大可否清理

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3d5X2hoeHg_size_16_color_FFFFFF_t_70 1][]

7）docker container run， --restart=always 服务化，容器停了会再给起来

注： --restart，容器退出时的重启策略，默认no

这里试试新起一个带--restart=always的容器nginx02，然后重启docker，比较一nginx01和nginx02，发现容器nginx02自动起了，而容器nginx01处于停止状态

![watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3d5X2hoeHg_size_16_color_FFFFFF_t_70 2][]

8）容器资源限制（CPU、内存），可以使用 docker container stats 查看容器运行参数

\--cpus decimal       Number of CPUs  例如宿主机有多核CPU，限制容器只使用1核

\--memory bytes      Memory limit        例如限制容器使用内容上限512M，swap默认是内存的两倍

[root@localhost ~]# docker container run -itd --cpus 1 --name nginx03 nginx
    a120b86d31618502a889532e46edf0515c00b6ca7873b9982515af5d91947620
    [root@localhost ~]#
    [root@localhost ~]# docker container run -itd --memory 512m --name nginx04 nginx
    cc74fb0809723882b6765b10d1e4560f0326fc1390f15e1f4f6fda92e9acba85
    [root@localhost ~]#
    [root@localhost ~]# docker container stats nginx04
    CONTAINER ID        NAME                CPU %               MEM USAGE / LIMIT   MEM %               NET I/O             BLOCK I/O           PIDS
    cc74fb080972        nginx04             0.00%               1.383MiB / 512MiB   0.27%               656B / 0B           0B / 0B             2
    ……

（End）

学习的大大教学视频传送门 -> [https://ke.qq.com/course/366769?taid=2769871654197425][https_ke.qq.com_course_366769_taid_2769871654197425]

[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3d5X2hoeHg_size_16_color_FFFFFF_t_70]: /images/20211104/6a6e41799a1345a1ad05ae2b41670574.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3d5X2hoeHg_size_16_color_FFFFFF_t_70 1]: /images/20211104/58c22f94f8c849e39c09b5d21ce9be1a.png
[watermark_type_ZmFuZ3poZW5naGVpdGk_shadow_10_text_aHR0cHM6Ly9ibG9nLmNzZG4ubmV0L3d5X2hoeHg_size_16_color_FFFFFF_t_70 2]: /images/20211104/17ab369bac2f4a8095e1289d030528f0.png
[https_ke.qq.com_course_366769_taid_2769871654197425]: https://ke.qq.com/course/366769?taid=2769871654197425