华为ensp VRRP+OSPF配置

ゝ一纸荒年。 2024-04-01 16:16 41阅读 0赞

![9662c4350f9041f08b1418e548877de4.png][]

严格安装作者文档操作，才能正常输出，别问我怎么知道的，因为这是我该了好多遍的

设置网络配置
    [R1]int e0/0/0
    [R1-Ethernet0/0/0]ip address 10.1.1.251 24
    [R1-Ethernet0/0/0]qu 
    [R1]int e0/0/1
    [R1-Ethernet0/0/1]ip address 1.1.1.1 30
    [R1-Ethernet0/0/1]qu
    设置ospf
    [R1]ospf 1
    [R1-ospf-1]area 0
    [R1-ospf-1-area-0.0.0.0]
    [R1-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255
    [R1-ospf-1-area-0.0.0.0]network 1.1.1.0 0.0.0.3
    [R1-ospf-1-area-0.0.0.0]qu
    设置vrrp
    [R1-ospf-1]int e0/0/0
    [R1-Ethernet0/0/0]vrrp vrid 10 virtual-ip 10.1.1.254	
    [R1-Ethernet0/0/0]vrrp vrid 10 priority 150
    [R1-Ethernet0/0/0]display vrrp brief 
    VRID  State        Interface                Type     Virtual IP     
    ----------------------------------------------------------------
    10    Master       Eth0/0/0                 Normal   10.1.1.254      
    ----------------------------------------------------------------
    Total:1     Master:1     Backup:0     Non-active:0

设置网络配置
    [R2]int e0/0/0
    [R2-Ethernet0/0/0]ip address 10.1.1.252 24
    [R2-Ethernet0/0/0]qu
    [R2]int e0/0/1
    [R2-Ethernet0/0/1]ip address 2.1.1.1 30
    设置ospf
    [R2-Ethernet0/0/1]ospf 1
    [R2-ospf-1]
    [R2-ospf-1]area 0
    [R2-ospf-1-area-0.0.0.0]
    [R2-ospf-1-area-0.0.0.0]network 10.1.1.0 0.0.0.255
    [R2-ospf-1-area-0.0.0.0]network 2.1.1.0 0.0.0.3
    [R2-ospf-1-area-0.0.0.0]qu
    设置vrrp
    [R2]int e0/0/0	
    [R2-Ethernet0/0/0]vrrp vrid 10 virtual-ip 10.1.1.254
    [R2-Ethernet0/0/0]display vrrp brief 
    VRID  State        Interface                Type     Virtual IP     
    ----------------------------------------------------------------
    10    Master       Eth0/0/0                 Normal   10.1.1.254     
    ----------------------------------------------------------------
    Total:1     Master:1     Backup:0     Non-active:0     
    [R2-Ethernet0/0/0]display vrr	
    [R2-Ethernet0/0/0]display vrrp br	
    [R2-Ethernet0/0/0]display vrrp brief 
    VRID  State        Interface                Type     Virtual IP     
    ----------------------------------------------------------------
    10    Initialize   Eth0/0/0                 Normal   10.1.1.254     
    ----------------------------------------------------------------
    Total:1     Master:0     Backup:0     Non-active:1     
    出现双master可以使用下面方法
    [R2-Ethernet0/0/0]shutdown
    [R2-Ethernet0/0/0]undo shutdown
    [R2-Ethernet0/0/0]display vrrp brief
    VRID  State        Interface                Type     Virtual IP     
    ----------------------------------------------------------------
    10    Backup       Eth0/0/0                 Normal   10.1.1.254     
    ----------------------------------------------------------------
    Total:1     Master:0     Backup:1     Non-active:0

设置网络配置
    [R3]int e0/0/0
    [R3-Ethernet0/0/0]ip address 1.1.1.2 30
    [R3-Ethernet0/0/0]qu
    [R3]int e0/0/1
    [R3-Ethernet0/0/1]ip address 2.1.1.2 30
    设置回环网络
    [R3]interface LoopBack 0
    [R3-LoopBack0]ip address 172.16.1.1 30
    [R3-LoopBack0]qu
    设置ospf
    [R3]ospf 1
    [R3-ospf-1]area 0
    [R3-ospf-1-area-0.0.0.0]network 1.1.1.0 0.0.0.3
    [R3-ospf-1-area-0.0.0.0]network 2.1.1.0 0.0.0.3

[9662c4350f9041f08b1418e548877de4.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/04/01/2122abf0c8fc4897b850948adb98b857.png