OPC 错误代码

男娘i 2022-12-09 03:30 319阅读 0赞

//==============================================================================
    // TITLE: operror.h
    //
    // CONTENTS:
    // 
    // Defines error codes for the Data Access specifications.
    //
    // (c) Copyright 1997-2003 The OPC Foundation
    // ALL RIGHTS RESERVED.
    //
    // DISCLAIMER:
    //  This code is provided by the OPC Foundation solely to assist in 
    //  understanding and use of the appropriate OPC Specification(s) and may be 
    //  used as set forth in the License Grant section of the OPC Specification.
    //  This code is provided as-is and without warranty or support of any sort
    //  and is subject to the Warranty and Liability Disclaimers which appear
    //  in the printed OPC Specification.
    //
    // MODIFICATION LOG:
    //
    // Date       By    Notes
    // ---------- ---   -----
    // 1997/05/12 ACC   Removed Unused messages
    //                  Added OPC_S_INUSE, OPC_E_INVALIDCONFIGFILE, OPC_E_NOTFOUND
    // 1997/05/12 ACC   Added OPC_E_INVALID_PID
    // 2002/08/12 CRT   Added new error codes for DA3.0
    // 2003/01/02 RSA   Updated formatting. Added messages to proxy/stub resource block.
    // 2003/10/12 RSA   Added error codes for complex data.
    //
    
    #ifndef __OPCERROR_H
    #define __OPCERROR_H
    
    #if _MSC_VER >= 1000
    #pragma once
    #endif // _MSC_VER >= 1000
    
    // The 'Facility' is set to the standard for COM interfaces or FACILITY_ITF (i.e. 0x004)
    // The 'Code' is set in the range defined OPC Commmon for DA (i.e. 0x0400 to 0x04FF)
    // Note that for backward compatibility not all existing codes use this range.
    
    //
    //  Values are 32 bit values layed out as follows:
    //
    //   3 3 2 2 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 1 1
    //   1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0 9 8 7 6 5 4 3 2 1 0
    //  +---+-+-+-----------------------+-------------------------------+
    //  |Sev|C|R|     Facility          |               Code            |
    //  +---+-+-+-----------------------+-------------------------------+
    //
    //  where
    //
    //      Sev - is the severity code
    //
    //          00 - Success
    //          01 - Informational
    //          10 - Warning
    //          11 - Error
    //
    //      C - is the Customer code flag
    //
    //      R - is a reserved bit
    //
    //      Facility - is the facility code
    //
    //      Code - is the facility's status code
    //
    //
    // Define the facility codes
    //
    
    
    //
    // Define the severity codes
    //
    
    
    //
    // MessageId: OPC_E_INVALIDHANDLE
    //
    // MessageText:
    //
    //  The value of the handle is invalid.
    //
    #define OPC_E_INVALIDHANDLE              ((HRESULT)0xC0040001L)
    
    //
    // MessageId: OPC_E_BADTYPE
    //
    // MessageText:
    //
    //  The server cannot convert the data between the specified format and/or requested data type and the canonical data type. 
    //
    #define OPC_E_BADTYPE                    ((HRESULT)0xC0040004L)
    
    //
    // MessageId: OPC_E_PUBLIC
    //
    // MessageText:
    //
    //  The requested operation cannot be done on a public group.
    //
    #define OPC_E_PUBLIC                     ((HRESULT)0xC0040005L)
    
    //
    // MessageId: OPC_E_BADRIGHTS
    //
    // MessageText:
    //
    //  The item's access rights do not allow the operation.
    //
    #define OPC_E_BADRIGHTS                  ((HRESULT)0xC0040006L)
    
    //
    // MessageId: OPC_E_UNKNOWNITEMID
    //
    // MessageText:
    //
    //  The item ID is not defined in the server address space or no longer exists in the server address space.
    //
    #define OPC_E_UNKNOWNITEMID              ((HRESULT)0xC0040007L)
    
    //
    // MessageId: OPC_E_INVALIDITEMID
    //
    // MessageText:
    //
    //  The item ID does not conform to the server's syntax.
    //
    #define OPC_E_INVALIDITEMID              ((HRESULT)0xC0040008L)
    
    //
    // MessageId: OPC_E_INVALIDFILTER
    //
    // MessageText:
    //
    //  The filter string was not valid.
    //
    #define OPC_E_INVALIDFILTER              ((HRESULT)0xC0040009L)
    
    //
    // MessageId: OPC_E_UNKNOWNPATH
    //
    // MessageText:
    //
    //  The item's access path is not known to the server.
    //
    #define OPC_E_UNKNOWNPATH                ((HRESULT)0xC004000AL)
    
    //
    // MessageId: OPC_E_RANGE
    //
    // MessageText:
    //
    //  The value was out of range.
    //
    #define OPC_E_RANGE                      ((HRESULT)0xC004000BL)
    
    //
    // MessageId: OPC_E_DUPLICATENAME
    //
    // MessageText:
    //
    //  Duplicate name not allowed.
    //
    #define OPC_E_DUPLICATENAME              ((HRESULT)0xC004000CL)
    
    //
    // MessageId: OPC_S_UNSUPPORTEDRATE
    //
    // MessageText:
    //
    //  The server does not support the requested data rate but will use the closest available rate.
    //
    #define OPC_S_UNSUPPORTEDRATE            ((HRESULT)0x0004000DL)
    
    //
    // MessageId: OPC_S_CLAMP
    //
    // MessageText:
    //
    //  A value passed to write was accepted but the output was clamped.
    //
    #define OPC_S_CLAMP                      ((HRESULT)0x0004000EL)
    
    //
    // MessageId: OPC_S_INUSE
    //
    // MessageText:
    //
    //  The operation cannot be performed because the object is bering referenced.
    //
    #define OPC_S_INUSE                      ((HRESULT)0x0004000FL)
    
    //
    // MessageId: OPC_E_INVALIDCONFIGFILE
    //
    // MessageText:
    //
    //  The server's configuration file is an invalid format.
    //
    #define OPC_E_INVALIDCONFIGFILE          ((HRESULT)0xC0040010L)
    
    //
    // MessageId: OPC_E_NOTFOUND
    //
    // MessageText:
    //
    //  The requested object (e.g. a public group) was not found.
    //
    #define OPC_E_NOTFOUND                   ((HRESULT)0xC0040011L)
    
    //
    // MessageId: OPC_E_INVALID_PID
    //
    // MessageText:
    //
    //  The specified property ID is not valid for the item.
    //
    #define OPC_E_INVALID_PID                ((HRESULT)0xC0040203L)
    
    //
    // MessageId: OPC_E_DEADBANDNOTSET
    //
    // MessageText:
    //
    //  The item deadband has not been set for this item.
    //
    #define OPC_E_DEADBANDNOTSET             ((HRESULT)0xC0040400L)
    
    //
    // MessageId: OPC_E_DEADBANDNOTSUPPORTED
    //
    // MessageText:
    //
    //  The item does not support deadband.
    //
    #define OPC_E_DEADBANDNOTSUPPORTED       ((HRESULT)0xC0040401L)
    
    //
    // MessageId: OPC_E_NOBUFFERING
    //
    // MessageText:
    //
    //  The server does not support buffering of data items that are collected at a faster rate than the group update rate.
    //
    #define OPC_E_NOBUFFERING                ((HRESULT)0xC0040402L)
    
    //
    // MessageId: OPC_E_INVALIDCONTINUATIONPOINT
    //
    // MessageText:
    //
    //  The continuation point is not valid.
    //
    #define OPC_E_INVALIDCONTINUATIONPOINT   ((HRESULT)0xC0040403L)
    
    //
    // MessageId: OPC_S_DATAQUEUEOVERFLOW
    //
    // MessageText:
    //
    //  Not every detected change has been returned since the server's buffer reached its limit and had to purge out the oldest data.
    //
    #define OPC_S_DATAQUEUEOVERFLOW          ((HRESULT)0x00040404L)
    
    //
    // MessageId: OPC_E_RATENOTSET
    //
    // MessageText:
    //
    //  There is no sampling rate set for the specified item.  
    //
    #define OPC_E_RATENOTSET                 ((HRESULT)0xC0040405L)
    
    //
    // MessageId: OPC_E_NOTSUPPORTED
    //
    // MessageText:
    //
    //  The server does not support writing of quality and/or timestamp.
    //
    #define OPC_E_NOTSUPPORTED               ((HRESULT)0xC0040406L)
    
    //
    // MessageId: OPCCPX_E_TYPE_CHANGED
    //
    // MessageText:
    //
    //  The dictionary and/or type description for the item has changed.
    //
    #define OPCCPX_E_TYPE_CHANGED            ((HRESULT)0xC0040407L)
    
    //
    // MessageId: OPCCPX_E_FILTER_DUPLICATE
    //
    // MessageText:
    //
    //  A data filter item with the specified name already exists. 
    //
    #define OPCCPX_E_FILTER_DUPLICATE        ((HRESULT)0xC0040408L)
    
    //
    // MessageId: OPCCPX_E_FILTER_INVALID
    //
    // MessageText:
    //
    //  The data filter value does not conform to the server's syntax.
    //
    #define OPCCPX_E_FILTER_INVALID          ((HRESULT)0xC0040409L)
    
    //
    // MessageId: OPCCPX_E_FILTER_ERROR
    //
    // MessageText:
    //
    //  An error occurred when the filter value was applied to the source data.
    //
    #define OPCCPX_E_FILTER_ERROR            ((HRESULT)0xC004040AL)
    
    //
    // MessageId: OPCCPX_S_FILTER_NO_DATA
    //
    // MessageText:
    //
    //  The item value is empty because the data filter has excluded all fields.
    //
    #define OPCCPX_S_FILTER_NO_DATA          ((HRESULT)0x0004040BL)
    
    #endif // ifndef __OPCERROR_H