MHA安装及等效性配置

忘是亡心i 2022-08-07 11:35 121阅读 0赞

MHA由MHA节点(可以理解为子节点)及MHA管理节点2部分组成。因此对于MHA的安装，相应的也分为2个部分，即安装MHA节点，安装MHA管理节点。本文基于CentOS 5.9 64bit简要描述了MHA的安装，同时也描述了在配置MHA时需要完成的等效性配置。供大家参考。

1、MHA的组成  
MHA consists of MHA Manager and MHA Node packages. MHA Manager runs on a manager server, and MHA Node runs on each MySQL server. MHA Node programs do not run always, but are invoked from MHA manager programs when needed (at configuration check, failover, etc). Both MHA Manager and MHA Node are written in Perl.

2、安装MHA Node  
MHA Node has scripts and dependent perl modules that do the following.  
    save\_binary\_logs: Saving and copying dead master's binary logs  
    apply\_diff\_relay\_logs: Identifying differential relay log events and applying all necessary log events  
    purge\_relay\_logs: Purging relay log files  
**You need to install MHA Node to all MySQL servers (both master and slave).** You also need to install MHA Node on a management server because MHA Manager modules internally depend on MHA Node modules. MHA Manager internally connects to managed MySQL servers via SSH and executes MHA Node scripts. MHA Node does not depend on any external Perl modules except DBD::mysql so you should be able to install easily.

\#\#\#本次安装环境  
\# cat /etc/issue  
CentOS release 5.9 (Final)  
Kernel \\r on an \\m

\#\#\#本次的演示环境  
\# more /etc/hosts  
192.168.1.6  dbsrv1          \#DB master  
192.168.1.7  dbsrv2          \#DB slave1  
192.168.1.8  dbsrv3          \#DB slave2  
192.168.1.82 mysql-manager   \#DB manager node

\#\#\#以下安装包，建议node和manger都安装  
\# yum install perl-DBD-MySQL  
\# yum install perl-Config-Tiny  
\# yum install perl-Log-Dispatch  
\# yum install perl-Parallel-ForkManager

\#\#\#如果yum时相关相关包时，无法获取到，建议配置epel后再安装，需要注意对应的相关版本号。  
\# wget [http://mirrors.ustc.edu.cn/fedora/epel/5/x86\_64/epel-release-5-4.noarch.rpm][http_mirrors.ustc.edu.cn_fedora_epel_5_x86_64_epel-release-5-4.noarch.rpm]  
\# rpm -Uvh epel-release-5-4.noarch.rpm

\#\#\#以下安装包从网络上搜集整理，大家可根据情形自行决定是否安装  
\# yum  -y install perl-Config-IniFiles  ncftp perl-Params-Validate  perl-CPAN perl-Test-Mock-LWP.noarch \\  
> perl-LWP-Authen-Negotiate.noarch perl-devel perl-ExtUtils-CBuilder perl-ExtUtils-MakeMaker

\# ls -hltr  
total 172K  
\-rw-r--r-- 1 root root 112K Dec  5 15:46 mha4mysql-manager-0.56.tar.gz  
\-rw-r--r-- 1 root root  49K Dec  5 15:46 mha4mysql-node-0.56.tar.gz

\# tar -xvf mha4mysql-node-0.56.tar.gz  
\# cd mha4mysql-node-0.56  
\# perl Makefile.PL           
\# make && make install

\#\#\#验证安装后的几个文件  
\[root@dbsrv1 bin\]\# ls apply\_diff\_relay\_logs save\_binary\_logs filter\_mysqlbinlog purge\_relay\_logs  
apply\_diff\_relay\_logs  filter\_mysqlbinlog  purge\_relay\_logs  save\_binary\_logs

3、安装MHA Manager  
MHA Manager has administrative command line programs such as masterha\_manager, masterha\_master\_switch, etc, and dependent Perl modules. MHA Manager depends on the following Perl modules. You need to install them before installing MHA Manager. Do not forget to install MHA Node.  
  MHA Node package  
  DBD::mysql  
  Config::Tiny  
  Log::Dispatch  
  Parallel::ForkManager  
  Time::HiRes (included from Perl v5.7.3)

\#\#\#以下部分为管理节点上的安装，注，管理节点也要安装MHA Node，此处省略  
\# tar -xvf mha4mysql-manager-0.56.tar.gz  
\# perl Makefile.PL  
\# make && make install

\# ls /usr/bin/mast\*  
/usr/bin/masterha\_check\_repl    /usr/bin/masterha\_conf\_host       /usr/bin/masterha\_master\_switch  
/usr/bin/masterha\_check\_ssh     /usr/bin/masterha\_manager         /usr/bin/masterha\_secondary\_check  
/usr/bin/masterha\_check\_status  /usr/bin/masterha\_master\_monitor  /usr/bin/masterha\_stop

4、配置等效性  
\#\#\#为各节点配置hosts文件  
\# for i in  6 7 8;do scp /etc/hosts 192.168.1.$i:/etc/;done

\[root@mysql-manager \#\]$ whoami  
root  
\#\#\#配置等效性  
\[root@mysql-manager ~\]\# ssh-keygen  
\[root@mysql-manager ~\]\# ls -a ./.ssh/  
.  ..  id\_rsa  id\_rsa.pub  
\[root@mysql-manager ~\]\# ssh-copy-id -i ~/.ssh/id\_rsa.pub [root@192.168.1.6][root_192.168.1.6]  
\[root@mysql-manager ~\]\# ssh-copy-id -i ~/.ssh/id\_rsa.pub [root@192.168.1.7][root_192.168.1.7]  
\[root@mysql-manager ~\]\# ssh-copy-id -i ~/.ssh/id\_rsa.pub [root@192.168.1.8][root_192.168.1.8]

\#\#\#使用上面的方法在其余的几个节点如法炮制后验证等效性

\#\#\#注意，除了要将公钥复制到其他机器之外，也要复制到自身，否则masterha\_check\_ssh时报错@20160811  
\[root@dbsrv2 ~\]\# ssh dbsrv1 date;ssh dbsrv2 date;ssh dbsrv3 date; ssh mysql-manager date;

\#\#\#在管理节点端使用MHA命令验证等效性  
\[root@mysql-manager ~\]\# masterha\_check\_ssh --conf=/etc/app1.cnf  
Mon Feb 16 15:12:43 2015 - \[warning\] Global configuration file /etc/masterha\_default.cnf not found. Skipping.  
Mon Feb 16 15:12:43 2015 - \[info\] Reading application default configuration from /etc/app1.cnf..  
Mon Feb 16 15:12:43 2015 - \[info\] Reading server configuration from /etc/app1.cnf..  
Mon Feb 16 15:12:43 2015 - \[info\] Starting SSH connection tests..  
Mon Feb 16 15:12:45 2015 - \[debug\]  
Mon Feb 16 15:12:43 2015 - \[debug\]  Connecting via SSH from [mysql@192.168.1.6(192.168.1.6:22][mysql_192.168.1.6_192.168.1.6_22]) to [mysql@192.168.1.7(192.168.1.7:22][mysql_192.168.1.7_192.168.1.7_22])..  
Mon Feb 16 15:12:44 2015 - \[debug\]   ok.  
Mon Feb 16 15:12:44 2015 - \[debug\]  Connecting via SSH from [mysql@192.168.1.6(192.168.1.6:22][mysql_192.168.1.6_192.168.1.6_22]) to [mysql@192.168.1.8(192.168.1.8:22][mysql_192.168.1.8_192.168.1.8_22])..  
Mon Feb 16 15:12:44 2015 - \[debug\]   ok.  
Mon Feb 16 15:12:45 2015 - \[debug\]  
Mon Feb 16 15:12:44 2015 - \[debug\]  Connecting via SSH from [mysql@192.168.1.7(192.168.1.7:22][mysql_192.168.1.7_192.168.1.7_22]) to [mysql@192.168.1.6(192.168.1.6:22][mysql_192.168.1.6_192.168.1.6_22])..  
Mon Feb 16 15:12:44 2015 - \[debug\]   ok.  
Mon Feb 16 15:12:44 2015 - \[debug\]  Connecting via SSH from [mysql@192.168.1.7(192.168.1.7:22][mysql_192.168.1.7_192.168.1.7_22]) to [mysql@192.168.1.8(192.168.1.8:22][mysql_192.168.1.8_192.168.1.8_22])..  
Mon Feb 16 15:12:44 2015 - \[debug\]   ok.  
Mon Feb 16 15:12:45 2015 - \[debug\]  
Mon Feb 16 15:12:44 2015 - \[debug\]  Connecting via SSH from [mysql@192.168.1.8(192.168.1.8:22][mysql_192.168.1.8_192.168.1.8_22]) to [mysql@192.168.1.6(192.168.1.6:22][mysql_192.168.1.6_192.168.1.6_22])..  
Mon Feb 16 15:12:45 2015 - \[debug\]   ok.  
Mon Feb 16 15:12:45 2015 - \[debug\]  Connecting via SSH from [mysql@192.168.1.8(192.168.1.8:22][mysql_192.168.1.8_192.168.1.8_22]) to [mysql@192.168.1.7(192.168.1.7:22][mysql_192.168.1.7_192.168.1.7_22])..  
Mon Feb 16 15:12:45 2015 - \[debug\]   ok.  
Mon Feb 16 15:12:45 2015 - \[info\] All SSH connection tests passed successfully.

[http_mirrors.ustc.edu.cn_fedora_epel_5_x86_64_epel-release-5-4.noarch.rpm]: http://mirrors.ustc.edu.cn/fedora/epel/5/x86_64/epel-release-5-4.noarch.rpm
[root_192.168.1.6]: mailto:root@192.168.1.6
[root_192.168.1.7]: mailto:root@192.168.1.7
[root_192.168.1.8]: mailto:root@192.168.1.8
[mysql_192.168.1.6_192.168.1.6_22]: mailto:mysql@192.168.1.6%28192.168.1.6:22
[mysql_192.168.1.7_192.168.1.7_22]: mailto:mysql@192.168.1.7%28192.168.1.7:22
[mysql_192.168.1.8_192.168.1.8_22]: mailto:mysql@192.168.1.8%28192.168.1.8:22