在Centos Stream 9中使用docker的方式安装APISIX、APISIX-DASHBOARD

我不是女神ヾ 2024-02-05 19:51 8阅读 0赞

## 1、在虚拟机中安装Docker、Docker-compose ##

### 1.1、安装Docker ###

1.1.1、清除旧版本的docker

yum remove docker docker-client docker-client-latest docker-common docker-latest docker-latest-logrotate docker-logrotate docker-engine

1.1.2、安装docker的依赖

yum install -y yum-utils device-mapper-persistent-data lvm2

1.1.3、安装gcc

yum install -y gcc gcc-c++

1.1.4、添加软件源国内镜像

yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

1.1.5、更新yum索引

yum makecache

1.1.6、安装docker-ce

yum install docker-ce docker-ce-cli containerd.io

1.1.7、启动docker，并设置开机启动

-- 启动docker
    systemctl start docker
    -- 设置docker开机启动
    systemctl enable docker

1.1.8、验证docker的安装是否成功

docker version

### ![583c0e5d881d401988f0598e721f9418.png][] ###

### 1.2、安装Docker-compose ###

1.2.1、docker和docker-compose的兼容性

1.2.2、下载docker-compose的二进制文件

方式一：

curl -L https://github.com/docker/compose/releases/download/v2.21.0/docker-compose-'uname -s'-'uname -m' -o /usr/local/bin/docker-compose

方式二（推荐）：

直接在github上下载，将其迁移到/usr/local/bin目录下，并授予读写权限。

url：[https://github.com/docker/compose/releases][https_github.com_docker_compose_releases]

chmod -R 777 /usr/local/bin/docker-compose

注意：此处尽可能选择在github上获取，国内的地址后期出现问题的几率较大，一次不成功多试几次。

1.2.3、验证docker-compose的安装是否成功

docker compose version

## ![fa730ce29bcd4f649b3f74f715883e64.png][] ##

## 2、安装apisix ##

2.1、下载 apisix-docker仓库

git clone https://github.com/apache/apisix-docker.git

2.2、进入拉取的目录中

cd apisix-docker/example

2.3、修改docker-compose文件的内容

#
    # Licensed to the Apache Software Foundation (ASF) under one or more
    # contributor license agreements.  See the NOTICE file distributed with
    # this work for additional information regarding copyright ownership.
    # The ASF licenses this file to You under the Apache License, Version 2.0
    # (the "License"); you may not use this file except in compliance with
    # the License.  You may obtain a copy of the License at
    #
    #     http://www.apache.org/licenses/LICENSE-2.0
    #
    # Unless required by applicable law or agreed to in writing, software
    # distributed under the License is distributed on an "AS IS" BASIS,
    # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    # See the License for the specific language governing permissions and
    # limitations under the License.
    #
    
    version: "3"
    
    services:
      apisix:
        image: apache/apisix:${APISIX_IMAGE_TAG:-3.7.0-debian}
        restart: always
        volumes:
          - ./apisix_conf/config.yaml:/usr/local/apisix/conf/config.yaml:ro
        depends_on:
          - etcd
        ##network_mode: host
        ports:
          - "9180:9180/tcp"
          - "9080:9080/tcp"
          - "9091:9091/tcp"
          - "9443:9443/tcp"
          - "9092:9092/tcp"
        networks:
          apisix:
    
      etcd:
        image: bitnami/etcd:3.4.15
        restart: always
        volumes:
          - etcd_data:/bitnami/etcd
        environment:
          ETCD_ENABLE_V2: "true"
          ALLOW_NONE_AUTHENTICATION: "yes"
          ETCD_ADVERTISE_CLIENT_URLS: "http://yourip:2379"
          ETCD_LISTEN_CLIENT_URLS: "http://0.0.0.0:2379"
        ports:
          - "2379:2379/tcp"
        networks:
          apisix:
    
      web1:
        image: nginx:1.19.0-alpine
        restart: always
        volumes:
          - ./upstream/web1.conf:/etc/nginx/nginx.conf
        ports:
          - "9081:80/tcp"
        environment:
          - NGINX_PORT=80
        networks:
          apisix:
    
      web2:
        image: nginx:1.19.0-alpine
        restart: always
        volumes:
          - ./upstream/web2.conf:/etc/nginx/nginx.conf
        ports:
          - "9082:80/tcp"
        environment:
          - NGINX_PORT=80
        networks:
          apisix:
    
      prometheus:
        image: prom/prometheus:v2.25.0
        restart: always
        volumes:
          - ./prometheus_conf/prometheus.yml:/etc/prometheus/prometheus.yml
        ports:
          - "9090:9090"
        networks:
          apisix:
    
      grafana:
        image: grafana/grafana:7.3.7
        restart: always
        ports:
          - "3000:3000"
        volumes:
          - "./grafana_conf/provisioning:/etc/grafana/provisioning"
          - "./grafana_conf/dashboards:/var/lib/grafana/dashboards"
          - "./grafana_conf/config/grafana.ini:/etc/grafana/grafana.ini"
        networks:
          apisix:
    
    networks:
      apisix:
        driver: bridge
    
    volumes:
      etcd_data:
        driver: local

该文件中主要修改下图中的位置

![d972490329714a4cb5a0d0edf1aef05a.png][]

2.4、使用docker-compose启用 APISIX

docker-compose -p docker-apisix up -d

2.5、查看apisix安装的情况

docker ps -a

此处关注的点是观察全部容器是否为up状态。

![60ea7547917d49cab4e675a71f2b38e3.png][]

## 3、安装apisix-dashboard ##

3.1、拉取apisix-dashboard镜像

docker pull apache/apisix-dashboard

3.2、添加dashboard的配置文件在/root路径下，conf.yaml

conf:
      listen:
        host: 0.0.0.0   # the address on which the `Manager API` should listen.
                        # The default value is 0.0.0.0, if want to specify, please enable it.
                        # This value accepts IPv4, IPv6, and hostname.
        port: 9000      # The port on which the `Manager API` should listen.
    
      allow_list:       # If we don't set any IP list, then any IP access is allowed by default.
      etcd:
        endpoints:      # supports defining multiple etcd host addresses for an etcd cluster
          - yourip:2379 # etcd install ip
    authentication:
      secret:
        zQ5w5jkLDh3jZpywJ3sskrw6Yv633ruq
      expire_time: 3600     # jwt token expire time, in second
      users:                # yamllint enable rule:comments-indentation
        - username: admin       # dashboard login infomation
          password: password
        - username: user
          password: password

3.3、启动容器

docker run -d --name dashboard -p 9000:9000 -v <CONFIG_FILE>:/usr/local/apisix-dashboard/conf/conf.yaml apache/apisix-dashboard
    
    -d：在后台运行
    --name：设置镜像名称
    -p：端口号
    -v：配置信息的挂载

3.4、查看容器启动情况

![0011ad66423d4f33905f2f0ea66d7e7a.png][]

## 4、测试 ##

4.1、访问[http://yourip:9000][http_yourip_9000]，可以访问到dashboard的页面，账号密码在conf.yaml文件中

![b0b6377d7b3b463c960662229c516dac.png][]

4.2、访问[http://yourip:3000][http_yourip_3000]，可以访问到grafana的页面，账号密码均为admin，需要输入两次

4.3、访问[http://yourip:9090][http_yourip_9090]，可以访问到prometheus页面

至此apisix和apisix-dashboard安装完成。

[583c0e5d881d401988f0598e721f9418.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/01/30/b4479c3558db4ea89b874f47253bebd6.png
[https_github.com_docker_compose_releases]: https://github.com/docker/compose/releases
[fa730ce29bcd4f649b3f74f715883e64.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/01/30/4530e07678104196af62ef227f77a574.png
[d972490329714a4cb5a0d0edf1aef05a.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/01/30/d5b555300f514f62b608d02be644902c.png
[60ea7547917d49cab4e675a71f2b38e3.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/01/30/d959499d3b934c01abfa3af5a76b5b4b.png
[0011ad66423d4f33905f2f0ea66d7e7a.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/01/30/3081aeaa45614e04b376bac438dc4cda.png
[http_yourip_9000]: http://yourip:9000
[b0b6377d7b3b463c960662229c516dac.png]: https://image.dandelioncloud.cn/pgy_files/images/2024/01/30/47abc130d97543cf91faa6e3e27f1139.png
[http_yourip_3000]: http://yourip:3000
[http_yourip_9090]: http://yourip:9090