使用docker-compose搭建FastDFS

蔚落 2023-02-18 09:57 9阅读 0赞

### docker-compose 搭建 FastDFS ###

*   *  github下载
     *  csdn下载
     *  搭建过程
     *   *  1. 服务器新建 /usr/local/FastDFS/environment/ 目录
         *  2. 编写 /usr/local/FastDFS/docker-compose.yml
         *  3. 编写 /usr/local/FastDFS/environment/tracker.conf 文件
         *  4. 编写 /usr/local/FastDFS/environment/storage.conf 文件
         *  5. 编写 /usr/local/FastDFS/environment/mod\_fastdfs.conf 文件
         *  6. 编写 /usr/local/FastDFS/environment/entrypoint.sh 文件
         *  7. 编写 /usr/local/FastDFS/environment/Dockerfile 文件
         *  8. 编写 \`/usr/local/FastDFS/updateIp.py\` 初始化脚本

## github下载 ##

下载 libfastcommon https://github.com/happyfish100/libfastcommon/releases  
运行FastDFS基础库  
下载 FastDFS https://github.com/happyfish100/fastdfs/releases  
下载 Nginx http://nginx.org/download/  
下载 fastdfs-nginx-module https://github.com/happyfish100/fastdfs-nginx-module/releases

## csdn下载 ##

*  我已经将脚本和软件打包成了一个集合，下载地址：https://download.csdn.net/download/tianjia125/12530975
 *  下载后
    
     *  1.先运行 updateIp.py 输入对应的宿主机IP
     *  2.在执行 docker-compose up -d 启动

## 搭建过程 ##

### 1. 服务器新建 /usr/local/FastDFS/environment/ 目录 ###

将软件复制进去  
nginx-1.19.0.tar.gz  
libfastcommon-1.0.43.tar.gz  
fastdfs-nginx-module-1.22.tar.gz  
fastdfs-6.06.tar.gz

### 2. 编写 /usr/local/FastDFS/docker-compose.yml ###

version: '3.1'
    services:
      fastdfs:
        build: environment
        restart: always
        container_name: fastdfs
        volumes:
          - ./storage:/fastdfs/storage
          - ./tracker:/fastdfs/tracker
        network_mode: host

### 3. 编写 /usr/local/FastDFS/environment/tracker.conf 文件 ###

1.  port 端口修改
2.  base\_path 存储路径修改

# is this config file disabled
    # false for enabled
    # true for disabled
    disabled = false
    
    # bind an address of this host
    # empty for bind all addresses of this host
    bind_addr =
    
    # the tracker server port
    port = 22122
    
    # connect timeout in seconds
    # default value is 30
    # Note: in the intranet network (LAN), 2 seconds is enough.
    connect_timeout = 5
    
    # network timeout in seconds for send and recv
    # default value is 30
    network_timeout = 60
    
    # the base path to store data and log files
    base_path = /fastdfs/tracker
    
    # max concurrent connections this server support
    # you should set this parameter larger, eg. 10240
    # default value is 256
    max_connections = 1024
    
    # accept thread count
    # default value is 1 which is recommended
    # since V4.07
    accept_threads = 1
    
    # work thread count
    # work threads to deal network io
    # default value is 4
    # since V2.00
    work_threads = 4
    
    # the min network buff size
    # default value 8KB
    min_buff_size = 8KB
    
    # the max network buff size
    # default value 128KB
    max_buff_size = 128KB
    
    # the method for selecting group to upload files
    # 0: round robin
    # 1: specify group
    # 2: load balance, select the max free space group to upload file
    store_lookup = 2
    
    # which group to upload file
    # when store_lookup set to 1, must set store_group to the group name
    store_group = group2
    
    # which storage server to upload file
    # 0: round robin (default)
    # 1: the first server order by ip address
    # 2: the first server order by priority (the minimal)
    # Note: if use_trunk_file set to true, must set store_server to 1 or 2
    store_server = 0
    
    # which path (means disk or mount point) of the storage server to upload file
    # 0: round robin
    # 2: load balance, select the max free space path to upload file
    store_path = 0
    
    # which storage server to download file
    # 0: round robin (default)
    # 1: the source storage server which the current file uploaded to
    download_server = 0
    
    # reserved storage space for system or other applications.
    # if the free(available) space of any stoarge server in 
    # a group <= reserved_storage_space, no file can be uploaded to this group.
    # bytes unit can be one of follows:
    ### G or g for gigabyte(GB)
    ### M or m for megabyte(MB)
    ### K or k for kilobyte(KB)
    ### no unit for byte(B)
    ### XX.XX% as ratio such as: reserved_storage_space = 10%
    reserved_storage_space = 20%
    
    #standard log level as syslog, case insensitive, value list:
    ### emerg for emergency
    ### alert
    ### crit for critical
    ### error
    ### warn for warning
    ### notice
    ### info
    ### debug
    log_level = info
    
    #unix group name to run this program, 
    #not set (empty) means run by the group of current user
    run_by_group=
    
    #unix username to run this program,
    #not set (empty) means run by current user
    run_by_user =
    
    # allow_hosts can ocur more than once, host can be hostname or ip address,
    # "*" (only one asterisk) means match all ip addresses
    # we can use CIDR ips like 192.168.5.64/26
    # and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
    # for example:
    # allow_hosts=10.0.1.[1-15,20]
    # allow_hosts=host[01-08,20-25].domain.com
    # allow_hosts=192.168.5.64/26
    allow_hosts = *
    
    # sync log buff to disk every interval seconds
    # default value is 10 seconds
    sync_log_buff_interval = 1
    
    # check storage server alive interval seconds
    check_active_interval = 120
    
    # thread stack size, should >= 64KB
    # default value is 256KB
    thread_stack_size = 256KB
    
    # auto adjust when the ip address of the storage server changed
    # default value is true
    storage_ip_changed_auto_adjust = true
    
    # storage sync file max delay seconds
    # default value is 86400 seconds (one day)
    # since V2.00
    storage_sync_file_max_delay = 86400
    
    # the max time of storage sync a file
    # default value is 300 seconds
    # since V2.00
    storage_sync_file_max_time = 300
    
    # if use a trunk file to store several small files
    # default value is false
    # since V3.00
    use_trunk_file = false 
    
    # the min slot size, should <= 4KB
    # default value is 256 bytes
    # since V3.00
    slot_min_size = 256
    
    # the max slot size, should > slot_min_size
    # store the upload file to trunk file when it's size <=  this value
    # default value is 16MB
    # since V3.00
    slot_max_size = 1MB
    
    # the alignment size to allocate the trunk space
    # default value is 0 (never align)
    # since V6.05
    # NOTE: the larger the alignment size, the less likely of disk
    #       fragmentation, but the more space is wasted.
    trunk_alloc_alignment_size = 256
    
    # if merge contiguous free spaces of trunk file
    # default value is false
    # since V6.05
    trunk_free_space_merge = true
    
    # if delete / reclaim the unused trunk files
    # default value is false
    # since V6.05
    delete_unused_trunk_files = false
    
    # the trunk file size, should >= 4MB
    # default value is 64MB
    # since V3.00
    trunk_file_size = 64MB
    
    # if create trunk file advancely
    # default value is false
    # since V3.06
    trunk_create_file_advance = false
    
    # the time base to create trunk file
    # the time format: HH:MM
    # default value is 02:00
    # since V3.06
    trunk_create_file_time_base = 02:00
    
    # the interval of create trunk file, unit: second
    # default value is 38400 (one day)
    # since V3.06
    trunk_create_file_interval = 86400
    
    # the threshold to create trunk file
    # when the free trunk file size less than the threshold,
    # will create he trunk files
    # default value is 0
    # since V3.06
    trunk_create_file_space_threshold = 20G
    
    # if check trunk space occupying when loading trunk free spaces
    # the occupied spaces will be ignored
    # default value is false
    # since V3.09
    # NOTICE: set this parameter to true will slow the loading of trunk spaces 
    # when startup. you should set this parameter to true when neccessary.
    trunk_init_check_occupying = false
    
    # if ignore storage_trunk.dat, reload from trunk binlog
    # default value is false
    # since V3.10
    # set to true once for version upgrade when your version less than V3.10
    trunk_init_reload_from_binlog = false
    
    # the min interval for compressing the trunk binlog file
    # unit: second, 0 means never compress
    # FastDFS compress the trunk binlog when trunk init and trunk destroy
    # recommand to set this parameter to 86400 (one day)
    # default value is 0
    # since V5.01
    trunk_compress_binlog_min_interval = 86400
    
    # the interval for compressing the trunk binlog file
    # unit: second, 0 means never compress
    # recommand to set this parameter to 86400 (one day)
    # default value is 0
    # since V6.05
    trunk_compress_binlog_interval = 86400
    
    # compress the trunk binlog time base, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    # default value is 03:00
    # since V6.05
    trunk_compress_binlog_time_base = 03:00
    
    # max backups for the trunk binlog file
    # default value is 0 (never backup)
    # since V6.05
    trunk_binlog_max_backups = 7
    
    # if use storage server ID instead of IP address
    # if you want to use dual IPs for storage server, you MUST set
    # this parameter to true, and configure the dual IPs in the file
    # configured by following item "storage_ids_filename", such as storage_ids.conf
    # default value is false
    # since V4.00
    use_storage_id = false
    
    # specify storage ids filename, can use relative or absolute path
    # this parameter is valid only when use_storage_id set to true
    # since V4.00
    storage_ids_filename = storage_ids.conf
    
    # id type of the storage server in the filename, values are:
    ## ip: the ip address of the storage server
    ## id: the server id of the storage server
    # this paramter is valid only when use_storage_id set to true
    # default value is ip
    # since V4.03
    id_type_in_filename = id
    
    # if store slave file use symbol link
    # default value is false
    # since V4.01
    store_slave_file_use_link = false
    
    # if rotate the error log every day
    # default value is false
    # since V4.02
    rotate_error_log = false
    
    # rotate error log time base, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    # default value is 00:00
    # since V4.02
    error_log_rotate_time = 00:00
    
    # if compress the old error log by gzip
    # default value is false
    # since V6.04
    compress_old_error_log = false
    
    # compress the error log days before
    # default value is 1
    # since V6.04
    compress_error_log_days_before = 7
    
    # rotate error log when the log file exceeds this size
    # 0 means never rotates log file by log file size
    # default value is 0
    # since V4.02
    rotate_error_log_size = 0
    
    # keep days of the log files
    # 0 means do not delete old log files
    # default value is 0
    log_file_keep_days = 0
    
    # if use connection pool
    # default value is false
    # since V4.05
    use_connection_pool = true
    
    # connections whose the idle time exceeds this time will be closed
    # unit: second
    # default value is 3600
    # since V4.05
    connection_pool_max_idle_time = 3600
    
    # HTTP port on this tracker server
    http.server_port = 8080
    
    # check storage HTTP server alive interval seconds
    # <= 0 for never check
    # default value is 30
    http.check_alive_interval = 30
    
    # check storage HTTP server alive type, values are:
    #   tcp : connect to the storge server with HTTP port only, 
    #        do not request and get response
    #   http: storage check alive url must return http status 200
    # default value is tcp
    http.check_alive_type = tcp
    
    # check storage HTTP server alive uri/url
    # NOTE: storage embed HTTP server support uri: /status.html
    http.check_alive_uri = /status.html

### 4. 编写 /usr/local/FastDFS/environment/storage.conf 文件 ###

1.  base\_path 存储路径修改
2.  store\_path0 存储路径修改
3.  tracker\_server 只保留1个，tracker ip与端口。这里IP填写自己宿主机的IP

# is this config file disabled
    # false for enabled
    # true for disabled
    disabled = false
    
    # the name of the group this storage server belongs to
    #
    # comment or remove this item for fetching from tracker server,
    # in this case, use_storage_id must set to true in tracker.conf,
    # and storage_ids.conf must be configured correctly.
    group_name = group1
    
    # bind an address of this host
    # empty for bind all addresses of this host
    bind_addr =
    
    # if bind an address of this host when connect to other servers 
    # (this storage server as a client)
    # true for binding the address configured by the above parameter: "bind_addr"
    # false for binding any address of this host
    client_bind = true
    
    # the storage server port
    port = 23000
    
    # connect timeout in seconds
    # default value is 30
    # Note: in the intranet network (LAN), 2 seconds is enough.
    connect_timeout = 5
    
    # network timeout in seconds for send and recv
    # default value is 30
    network_timeout = 60
    
    # the heart beat interval in seconds
    # the storage server send heartbeat to tracker server periodically
    # default value is 30
    heart_beat_interval = 30
    
    # disk usage report interval in seconds
    # the storage server send disk usage report to tracker server periodically
    # default value is 300
    stat_report_interval = 60
    
    # the base path to store data and log files
    # NOTE: the binlog files maybe are large, make sure
    #       the base path has enough disk space,
    #       eg. the disk free space should > 50GB
    base_path = /fastdfs/storage
    
    # max concurrent connections the server supported,
    # you should set this parameter larger, eg. 10240
    # default value is 256
    max_connections = 1024
    
    # the buff size to recv / send data from/to network
    # this parameter must more than 8KB
    # 256KB or 512KB is recommended
    # default value is 64KB
    # since V2.00
    buff_size = 256KB
    
    # accept thread count
    # default value is 1 which is recommended
    # since V4.07
    accept_threads = 1
    
    # work thread count
    # work threads to deal network io
    # default value is 4
    # since V2.00
    work_threads = 4
    
    # if disk read / write separated
    ##  false for mixed read and write
    ##  true for separated read and write
    # default value is true
    # since V2.00
    disk_rw_separated = true
    
    # disk reader thread count per store path
    # for mixed read / write, this parameter can be 0
    # default value is 1
    # since V2.00
    disk_reader_threads = 1
    
    # disk writer thread count per store path
    # for mixed read / write, this parameter can be 0
    # default value is 1
    # since V2.00
    disk_writer_threads = 1
    
    # when no entry to sync, try read binlog again after X milliseconds
    # must > 0, default value is 200ms
    sync_wait_msec = 50
    
    # after sync a file, usleep milliseconds
    # 0 for sync successively (never call usleep)
    sync_interval = 0
    
    # storage sync start time of a day, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    sync_start_time = 00:00
    
    # storage sync end time of a day, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    sync_end_time = 23:59
    
    # write to the mark file after sync N files
    # default value is 500
    write_mark_file_freq = 500
    
    # disk recovery thread count
    # default value is 1
    # since V6.04
    disk_recovery_threads = 3
    
    # store path (disk or mount point) count, default value is 1
    store_path_count = 1
    
    # store_path#, based on 0, to configure the store paths to store files
    # if store_path0 not exists, it's value is base_path (NOT recommended)
    # the paths must be exist.
    #
    # IMPORTANT NOTE:
    #       the store paths' order is very important, don't mess up!!!
    #       the base_path should be independent (different) of the store paths
    
    store_path0 = /fastdfs/storage
    #store_path1 = /home/yuqing/fastdfs2
    
    # subdir_count  * subdir_count directories will be auto created under each 
    # store_path (disk), value can be 1 to 256, default value is 256
    subdir_count_per_path = 256
    
    # tracker_server can ocur more than once for multi tracker servers.
    # the value format of tracker_server is "HOST:PORT",
    #   the HOST can be hostname or ip address,
    #   and the HOST can be dual IPs or hostnames seperated by comma,
    #   the dual IPS must be an inner (intranet) IP and an outer (extranet) IP,
    #   or two different types of inner (intranet) IPs.
    #   for example: 192.168.2.100,122.244.141.46:22122
    #   another eg.: 192.168.1.10,172.17.4.21:22122
    
    tracker_server = 192.168.72.129:22122
    #tracker_server = 192.168.209.122:22122
    
    #standard log level as syslog, case insensitive, value list:
    ### emerg for emergency
    ### alert
    ### crit for critical
    ### error
    ### warn for warning
    ### notice
    ### info
    ### debug
    log_level = info
    
    #unix group name to run this program, 
    #not set (empty) means run by the group of current user
    run_by_group =
    
    #unix username to run this program,
    #not set (empty) means run by current user
    run_by_user =
    
    # allow_hosts can ocur more than once, host can be hostname or ip address,
    # "*" (only one asterisk) means match all ip addresses
    # we can use CIDR ips like 192.168.5.64/26
    # and also use range like these: 10.0.1.[0-254] and host[01-08,20-25].domain.com
    # for example:
    # allow_hosts=10.0.1.[1-15,20]
    # allow_hosts=host[01-08,20-25].domain.com
    # allow_hosts=192.168.5.64/26
    allow_hosts = *
    
    # the mode of the files distributed to the data path
    # 0: round robin(default)
    # 1: random, distributted by hash code
    file_distribute_path_mode = 0
    
    # valid when file_distribute_to_path is set to 0 (round robin).
    # when the written file count reaches this number, then rotate to next path.
    # rotate to the first path (00/00) after the last path (such as FF/FF).
    # default value is 100
    file_distribute_rotate_count = 100
    
    # call fsync to disk when write big file
    # 0: never call fsync
    # other: call fsync when written bytes >= this bytes
    # default value is 0 (never call fsync)
    fsync_after_written_bytes = 0
    
    # sync log buff to disk every interval seconds
    # must > 0, default value is 10 seconds
    sync_log_buff_interval = 1
    
    # sync binlog buff / cache to disk every interval seconds
    # default value is 60 seconds
    sync_binlog_buff_interval = 1
    
    # sync storage stat info to disk every interval seconds
    # default value is 300 seconds
    sync_stat_file_interval = 300
    
    # thread stack size, should >= 512KB
    # default value is 512KB
    thread_stack_size = 512KB
    
    # the priority as a source server for uploading file.
    # the lower this value, the higher its uploading priority.
    # default value is 10
    upload_priority = 10
    
    # the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
    # multi aliases split by comma. empty value means auto set by OS type
    # default values is empty
    if_alias_prefix =
    
    # if check file duplicate, when set to true, use FastDHT to store file indexes
    # 1 or yes: need check
    # 0 or no: do not check
    # default value is 0
    check_file_duplicate = 0
    
    # file signature method for check file duplicate
    ## hash: four 32 bits hash code
    ## md5: MD5 signature
    # default value is hash
    # since V4.01
    file_signature_method = hash
    
    # namespace for storing file indexes (key-value pairs)
    # this item must be set when check_file_duplicate is true / on
    key_namespace = FastDFS
    
    # set keep_alive to 1 to enable persistent connection with FastDHT servers
    # default value is 0 (short connection)
    keep_alive = 0
    
    # you can use "#include filename" (not include double quotes) directive to 
    # load FastDHT server list, when the filename is a relative path such as 
    # pure filename, the base path is the base path of current/this config file.
    # must set FastDHT server list when check_file_duplicate is true / on
    # please see INSTALL of FastDHT for detail
    ##include /home/yuqing/fastdht/conf/fdht_servers.conf
    
    # if log to access log
    # default value is false
    # since V4.00
    use_access_log = false
    
    # if rotate the access log every day
    # default value is false
    # since V4.00
    rotate_access_log = false
    
    # rotate access log time base, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    # default value is 00:00
    # since V4.00
    access_log_rotate_time = 00:00
    
    # if compress the old access log by gzip
    # default value is false
    # since V6.04
    compress_old_access_log = false
    
    # compress the access log days before
    # default value is 1
    # since V6.04
    compress_access_log_days_before = 7
    
    # if rotate the error log every day
    # default value is false
    # since V4.02
    rotate_error_log = false
    
    # rotate error log time base, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    # default value is 00:00
    # since V4.02
    error_log_rotate_time = 00:00
    
    # if compress the old error log by gzip
    # default value is false
    # since V6.04
    compress_old_error_log = false
    
    # compress the error log days before
    # default value is 1
    # since V6.04
    compress_error_log_days_before = 7
    
    # rotate access log when the log file exceeds this size
    # 0 means never rotates log file by log file size
    # default value is 0
    # since V4.02
    rotate_access_log_size = 0
    
    # rotate error log when the log file exceeds this size
    # 0 means never rotates log file by log file size
    # default value is 0
    # since V4.02
    rotate_error_log_size = 0
    
    # keep days of the log files
    # 0 means do not delete old log files
    # default value is 0
    log_file_keep_days = 0
    
    # if skip the invalid record when sync file
    # default value is false
    # since V4.02
    file_sync_skip_invalid_record = false
    
    # if use connection pool
    # default value is false
    # since V4.05
    use_connection_pool = true
    
    # connections whose the idle time exceeds this time will be closed
    # unit: second
    # default value is 3600
    # since V4.05
    connection_pool_max_idle_time = 3600
    
    # if compress the binlog files by gzip
    # default value is false
    # since V6.01
    compress_binlog = true
    
    # try to compress binlog time, time format: Hour:Minute
    # Hour from 0 to 23, Minute from 0 to 59
    # default value is 01:30
    # since V6.01
    compress_binlog_time = 01:30
    
    # if check the mark of store path to prevent confusion
    # recommend to set this parameter to true
    # if two storage servers (instances) MUST use a same store path for
    # some specific purposes, you should set this parameter to false
    # default value is true
    # since V6.03
    check_store_path_mark = true
    
    # use the ip address of this storage server if domain_name is empty,
    # else this domain name will ocur in the url redirected by the tracker server
    http.domain_name =
    
    # the port of the web server on this storage server
    http.server_port = 8888

### 5. 编写 /usr/local/FastDFS/environment/mod\_fastdfs.conf 文件 ###

1.  tracker\_server tracker ip与端口
2.  url\_have\_group\_name 改 true
3.  store\_path0 存储路径修改

# connect timeout in seconds
    # default value is 30s
    connect_timeout=2
    
    # network recv and send timeout in seconds
    # default value is 30s
    network_timeout=30
    
    # the base path to store log files
    base_path=/tmp
    
    # if load FastDFS parameters from tracker server
    # since V1.12
    # default value is false
    load_fdfs_parameters_from_tracker=true
    
    # storage sync file max delay seconds
    # same as tracker.conf
    # valid only when load_fdfs_parameters_from_tracker is false
    # since V1.12
    # default value is 86400 seconds (one day)
    storage_sync_file_max_delay = 86400
    
    # if use storage ID instead of IP address
    # same as tracker.conf
    # valid only when load_fdfs_parameters_from_tracker is false
    # default value is false
    # since V1.13
    use_storage_id = false
    
    # specify storage ids filename, can use relative or absolute path
    # same as tracker.conf
    # valid only when load_fdfs_parameters_from_tracker is false
    # since V1.13
    storage_ids_filename = storage_ids.conf
    
    # FastDFS tracker_server can ocur more than once, and tracker_server format is
    #  "host:port", host can be hostname or ip address
    # valid only when load_fdfs_parameters_from_tracker is true
    tracker_server=192.168.72.129:22122
    
    # the port of the local storage server
    # the default value is 23000
    storage_server_port=23000
    
    # the group name of the local storage server
    group_name=group1
    
    # if the url / uri including the group name
    # set to false when uri like /M00/00/00/xxx
    # set to true when uri like ${group_name}/M00/00/00/xxx, such as group1/M00/xxx
    # default value is false
    url_have_group_name = true
    
    # path(disk or mount point) count, default value is 1
    # must same as storage.conf
    store_path_count=1
    
    # store_path#, based 0, if store_path0 not exists, it's value is base_path
    # the paths must be exist
    # must same as storage.conf
    store_path0=/fastdfs/storage
    #store_path1=/home/yuqing/fastdfs1
    
    # standard log level as syslog, case insensitive, value list:
    ### emerg for emergency
    ### alert
    ### crit for critical
    ### error
    ### warn for warning
    ### notice
    ### info
    ### debug
    log_level=info
    
    # set the log filename, such as /usr/local/apache2/logs/mod_fastdfs.log
    # empty for output to stderr (apache and nginx error_log file)
    log_filename=
    
    # response mode when the file not exist in the local file system
    ## proxy: get the content from other storage server, then send to client
    ## redirect: redirect to the original storage server (HTTP Header is Location)
    response_mode=proxy
    
    # the NIC alias prefix, such as eth in Linux, you can see it by ifconfig -a
    # multi aliases split by comma. empty value means auto set by OS type
    # this paramter used to get all ip address of the local host
    # default values is empty
    if_alias_prefix=
    
    # use "#include" directive to include HTTP config file
    # NOTE: #include is an include directive, do NOT remove the # before include
    #include http.conf
    
    
    # if support flv
    # default value is false
    # since v1.15
    flv_support = true
    
    # flv file extension name
    # default value is flv
    # since v1.15
    flv_extension = flv
    
    
    # set the group count
    # set to none zero to support multi-group on this storage server
    # set to 0  for single group only
    # groups settings section as [group1], [group2], ..., [groupN]
    # default value is 0
    # since v1.14
    group_count = 0
    
    # group settings for group #1
    # since v1.14
    # when support multi-group on this storage server, uncomment following section
    #[group1]
    #group_name=group1
    #storage_server_port=23000
    #store_path_count=2
    #store_path0=/home/yuqing/fastdfs
    #store_path1=/home/yuqing/fastdfs1
    
    # group settings for group #2
    # since v1.14
    # when support multi-group, uncomment following section as neccessary
    #[group2]
    #group_name=group2
    #storage_server_port=23000
    #store_path_count=1
    #store_path0=/home/yuqing/fastdfs

### 6. 编写 /usr/local/FastDFS/environment/entrypoint.sh 文件 ###

1.  用来运行程序的命令

#!/bin/sh
    /etc/init.d/fdfs_trackerd start
    /etc/init.d/fdfs_storaged start
    /usr/local/nginx/sbin/nginx -g 'daemon off;'
    #ping baidu.com

### 7. 编写 /usr/local/FastDFS/environment/Dockerfile 文件 ###

# 基础镜像
    FROM ubuntu:xenial
    
    # 更新数据源
    WORKDIR /etc/apt
    RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial main restricted universe multiverse' > sources.list
    RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial-security main restricted universe multiverse' >> sources.list
    RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial-updates main restricted universe multiverse' >> sources.list
    RUN echo 'deb http://mirrors.aliyun.com/ubuntu/ xenial-backports main restricted universe multiverse' >> sources.list
    RUN apt-get update
    
    # 安装依赖
    RUN apt-get install make gcc libpcre3-dev zlib1g-dev libevent-dev openssl libssl-dev --assume-yes
    # 安装 ping 命令常占容器，方便进入最终
    #RUN apt-get install iputils-ping --assume-yes
    
    # 复制工具包
    ADD fastdfs-6.06.tar.gz /usr/local/fastdfs
    ADD fastdfs-nginx-module-1.22.tar.gz /usr/local/fastdfs
    ADD libfastcommon-1.0.43.tar.gz /usr/local/fastdfs
    ADD nginx-1.19.0.tar.gz /usr/local/fastdfs
    
    # 安装 libfastcommon
    WORKDIR /usr/local/fastdfs/libfastcommon-1.0.43
    RUN ./make.sh && ./make.sh install
    
    # 安装 FastDFS
    WORKDIR /usr/local/fastdfs/fastdfs-6.06
    RUN ./make.sh && ./make.sh install
    
    # 配置 FastDFS 跟踪器
    ADD tracker.conf /etc/fdfs
    RUN mkdir -p /fastdfs/tracker
    
    # 配置 FastDFS 存储
    ADD storage.conf /etc/fdfs
    RUN mkdir -p /fastdfs/storage
    
    # FastDFS 与 Nginx 集成
    WORKDIR /usr/local/fastdfs/nginx-1.19.0
    RUN ./configure --add-module=/usr/local/fastdfs/fastdfs-nginx-module-1.22/src
    RUN make && make install
    ADD mod_fastdfs.conf /etc/fdfs
    
    # 配置 Nginx
    ADD nginx.conf /usr/local/nginx/conf
    
    COPY entrypoint.sh /usr/local/bin/
    RUN chmod +x /usr/local/bin/entrypoint.sh
    ENTRYPOINT ["/usr/local/bin/entrypoint.sh"]
    
    WORKDIR /
    EXPOSE 80
    EXPOSE 22122
    CMD ["/bin/bash"]

### 8. 编写 `/usr/local/FastDFS/updateIp.py` 初始化脚本 ###

import os
    import socket
    from string import Template
    
    ip = price_str = input("输入宿主机的IP地址：")
    print(ip)
    
    key = {'ip': ip, 'group_name': '${group_name}'}
    
    modFile = open(os.getcwd() + '/environment/mod_fastdfs.conf', 'r')
    modFileTem = Template(modFile.read())
    modFastdfsResult = modFileTem.substitute(key)
    modFastdfsWrite = open(os.getcwd() + '/environment/mod_fastdfs.conf', 'w+')
    modFastdfsWrite.write(modFastdfsResult);
    print("修改 /environment/mod_fastdfs.conf tracker_server 属性IP地址为=" + ip)
    
    storageFile = open(os.getcwd() + '/environment/storage.conf', 'r')
    storageFileTem = Template(storageFile.read())
    storageFastdfsResult = storageFileTem.substitute(key)
    storageFastdfsWrite = open(os.getcwd() + '/environment/storage.conf', 'w+')
    storageFastdfsWrite.write(storageFastdfsResult);
    print("修改 /environment/storage.conf tracker_server 属性IP地址为=" + ip)