二 . 微服务之springbootalibaba版本 nacos1.4.2

小咪咪 2023-01-23 14:51 83阅读 0赞

[nacos文档][nacos]  
nacos配置mysql数据库  
本地启动nacos配置单机模式 修改startup.sh文件MODE字段

export MODE="standalone"

#
    # Copyright 1999-2018 Alibaba Group Holding Ltd.
    #
    # Licensed under the Apache License, Version 2.0 (the "License");
    # you may not use this file except in compliance with the License.
    # You may obtain a copy of the License at
    #
    # http://www.apache.org/licenses/LICENSE-2.0
    #
    # Unless required by applicable law or agreed to in writing, software
    # distributed under the License is distributed on an "AS IS" BASIS,
    # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
    # See the License for the specific language governing permissions and
    # limitations under the License.
    #
    
    #*************** Spring Boot Related Configurations ***************#
    ### Default web context path:
    server.servlet.contextPath=/nacos
    ### Default web server port:
    server.port=8848
    
    #*************** Network Related Configurations ***************#
    ### If prefer hostname over ip for Nacos server addresses in cluster.conf:
    # nacos.inetutils.prefer-hostname-over-ip=false
    
    ### Specify local server's IP:
    # nacos.inetutils.ip-address=
    
    
    #*************** Config Module Related Configurations ***************#
    ### If use MySQL as datasource:
    spring.datasource.platform=mysql
    
    ### Count of DB:
    db.num=1
    
    ### Connect URL of DB:
    db.url.0=xxx
    db.user=xxx
    db.password=xxx
    
    ### Connection pool configuration: hikariCP
    db.pool.config.connectionTimeout=30000
    db.pool.config.validationTimeout=10000
    db.pool.config.maximumPoolSize=20
    db.pool.config.minimumIdle=2
    
    #*************** Naming Module Related Configurations ***************#
    ### Data dispatch task execution period in milliseconds:
    # nacos.naming.distro.taskDispatchPeriod=200
    
    ### Data count of batch sync task:
    # nacos.naming.distro.batchSyncKeyCount=1000
    
    ### Retry delay in milliseconds if sync task failed:
    # nacos.naming.distro.syncRetryDelay=5000
    
    ### If enable data warmup. If set to false, the server would accept request without local data preparation:
    # nacos.naming.data.warmup=true
    
    ### If enable the instance auto expiration, kind like of health check of instance:
    # nacos.naming.expireInstance=true
    
    nacos.naming.empty-service.auto-clean=true
    nacos.naming.empty-service.clean.initial-delay-ms=50000
    nacos.naming.empty-service.clean.period-time-ms=30000
    
    
    #*************** CMDB Module Related Configurations ***************#
    ### The interval to dump external CMDB in seconds:
    # nacos.cmdb.dumpTaskInterval=3600
    
    ### The interval of polling data change event in seconds:
    # nacos.cmdb.eventTaskInterval=10
    
    ### The interval of loading labels in seconds:
    # nacos.cmdb.labelTaskInterval=300
    
    ### If turn on data loading task:
    # nacos.cmdb.loadDataAtStart=false
    
    
    #*************** Metrics Related Configurations ***************#
    ### Metrics for prometheus
    #management.endpoints.web.exposure.include=*
    
    ### Metrics for elastic search
    management.metrics.export.elastic.enabled=false
    #management.metrics.export.elastic.host=http://localhost:9200
    
    ### Metrics for influx
    management.metrics.export.influx.enabled=false
    #management.metrics.export.influx.db=springboot
    #management.metrics.export.influx.uri=http://localhost:8086
    #management.metrics.export.influx.auto-create-db=true
    #management.metrics.export.influx.consistency=one
    #management.metrics.export.influx.compressed=true
    
    
    #*************** Access Log Related Configurations ***************#
    ### If turn on the access log:
    server.tomcat.accesslog.enabled=true
    
    ### The access log pattern:
    server.tomcat.accesslog.pattern=%h %l %u %t "%r" %s %b %D %{ User-Agent}i %{ Request-Source}i
    
    ### The directory of access log:
    server.tomcat.basedir=
    
    
    #*************** Access Control Related Configurations ***************#
    ### If enable spring security, this option is deprecated in 1.2.0:
    #spring.security.enabled=false
    
    ### The ignore urls of auth, is deprecated in 1.2.0:
    nacos.security.ignore.urls=/,/error,/**/*.css,/**/*.js,/**/*.html,/**/*.map,/**/*.svg,/**/*.png,/**/*.ico,/console-ui/public/**,/v1/auth/**,/v1/console/health/**,/actuator/**,/v1/console/server/**
    
    ### The auth system to use, currently only 'nacos' is supported:
    nacos.core.auth.system.type=nacos
    
    ### If turn on auth system:
    nacos.core.auth.enabled=false
    
    ### The token expiration in seconds:
    nacos.core.auth.default.token.expire.seconds=18000
    
    ### The default token:
    nacos.core.auth.default.token.secret.key=SecretKey012345678901234567890123456789012345678901234567890123456789
    
    ### Turn on/off caching of auth information. By turning on this switch, the update of auth information would have a 15 seconds delay.
    nacos.core.auth.caching.enabled=true
    
    ### Since 1.4.1, Turn on/off white auth for user-agent: nacos-server, only for upgrade from old version.
    nacos.core.auth.enable.userAgentAuthWhite=true
    
    ### Since 1.4.1, worked when nacos.core.auth.enabled=true and nacos.core.auth.enable.userAgentAuthWhite=false.
    ### The two properties is the white list for auth and used by identity the request from other server.
    nacos.core.auth.server.identity.key=
    nacos.core.auth.server.identity.value=
    
    #*************** Istio Related Configurations ***************#
    ### If turn on the MCP server:
    nacos.istio.mcp.server.enabled=false
    
    
    
    ###*************** Add from 1.3.0 ***************###
    
    
    #*************** Core Related Configurations ***************#
    
    ### set the WorkerID manually
    # nacos.core.snowflake.worker-id=
    
    ### Member-MetaData
    # nacos.core.member.meta.site=
    # nacos.core.member.meta.adweight=
    # nacos.core.member.meta.weight=
    
    ### MemberLookup
    ### Addressing pattern category, If set, the priority is highest
    # nacos.core.member.lookup.type=[file,address-server]
    ## Set the cluster list with a configuration file or command-line argument
    # nacos.member.list=192.168.16.101:8847?raft_port=8807,192.168.16.101?raft_port=8808,192.168.16.101:8849?raft_port=8809
    ## for AddressServerMemberLookup
    # Maximum number of retries to query the address server upon initialization
    # nacos.core.address-server.retry=5
    ## Server domain name address of [address-server] mode
    # address.server.domain=jmenv.tbsite.net
    ## Server port of [address-server] mode
    # address.server.port=8080
    ## Request address of [address-server] mode
    # address.server.url=/nacos/serverlist
    
    #*************** JRaft Related Configurations ***************#
    
    ### Sets the Raft cluster election timeout, default value is 5 second
    # nacos.core.protocol.raft.data.election_timeout_ms=5000
    ### Sets the amount of time the Raft snapshot will execute periodically, default is 30 minute
    # nacos.core.protocol.raft.data.snapshot_interval_secs=30
    ### raft internal worker threads
    # nacos.core.protocol.raft.data.core_thread_num=8
    ### Number of threads required for raft business request processing
    # nacos.core.protocol.raft.data.cli_service_thread_num=4
    ### raft linear read strategy. Safe linear reads are used by default, that is, the Leader tenure is confirmed by heartbeat
    # nacos.core.protocol.raft.data.read_index_type=ReadOnlySafe
    ### rpc request timeout, default 5 seconds
    # nacos.core.protocol.raft.data.rpc_request_timeout_ms=5000

[nacos]: https://nacos.io/zh-cn/docs/what-is-nacos.html