使用kolla-ansible部署Ceph集群

一时失言乱红尘 2023-01-06 11:48 371阅读 0赞

目前kolla官方最新的版本已经废弃ceph的部署，不过之前的Kolla版本还是支持。最后一个版本支持部署ceph的为Openstack-Train。那就使用T版本的ceph镜像进行部署。

本次部署的ceph使用bluestore类型的存储。关于filestore和bluestore的区别，就在于写到磁盘的次数，filestore有journal存储，每次数据先写到此磁盘中，然后再写到数据库，并且还有文件系统 ，所以此方式对于连续写的集群来说，性能不佳。使用bluestore后，数据直接落盘，不存在写入到文件系统。其中blustore还有不同空间的使用，slow：慢速空间，直接存储数据，一般使用机械盘；db：高速空间，存储元数据，一般使用ssd盘；wal：超高速空间，存储集群日志，一般使用NVMe ssd 或NVRAM 时延小的SSD盘。

具体步骤如下

## 1 设置磁盘label ##

注：此步最重要，如果标签没有打对，后续部署可能会出错。  
本集群使用三台虚拟机模拟，每一台机器上面有五块盘，三块盘做slow空间，一块盘做db空间，一块盘做wal空间。

[root@node01 ~]# lsblk 
    NAME            MAJ:MIN RM  SIZE RO TYPE MOUNTPOINT
    sda               8:0    0  100G  0 disk 
    ├─sda1            8:1    0    1G  0 part /boot
    ├─sda2            8:2    0   49G  0 part 
    │ ├─centos-root 253:0    0   97G  0 lvm  /
    │ └─centos-swap 253:1    0    2G  0 lvm  
    └─sda3            8:3    0   50G  0 part 
      └─centos-root 253:0    0   97G  0 lvm  /
    sdb               8:16   0   20G  0 disk 
    sdc               8:32   0   20G  0 disk 
    sdd               8:48   0   20G  0 disk 
    sde               8:64   0   20G  0 disk 
    sdf               8:80   0   20G  0 disk 
    sr0              11:0    1 1024M  0 rom

使用ansible对三台机器行标签  
此步为设置slow空间  
先创建slow空间gpt分区

###sdb盘
    [root@node01 ~]# ansible all -m shell -a "parted /dev/sdb -s -- mklabel gpt mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO1 1 100" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node01 | SUCCESS | rc=0 >>
    
    
    node03 | SUCCESS | rc=0 >>
    
    
    node02 | SUCCESS | rc=0 >>
    
    ###sdc盘
    [root@node01 ~]# ansible all -m shell -a "parted /dev/sdc -s -- mklabel gpt mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO2 1 100" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node03 | SUCCESS | rc=0 >>
    
    
    node01 | SUCCESS | rc=0 >>
    
    
    node02 | SUCCESS | rc=0 >>
    
    ###sdd盘
    [root@node01 ~]# ansible all -m shell -a "parted /dev/sdd -s -- mklabel gpt mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO3 1 100" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node01 | SUCCESS | rc=0 >>
    
    
    node02 | SUCCESS | rc=0 >>
    
    
    node03 | SUCCESS | rc=0 >>

将此三块盘的剩余空间全部分配给slow空间

###sdb盘
    [root@node01 ~]# ansible all -m shell -a "parted /dev/sdb -s mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO1_B 101 100%" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node01 | SUCCESS | rc=0 >>
    
    
    node02 | SUCCESS | rc=0 >>
    
    
    node03 | SUCCESS | rc=0 >>
    
    ###sdc盘
    [root@node01 ~]# ansible all -m shell -a "parted /dev/sdc -s mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO2_B 101 100%" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node01 | SUCCESS | rc=0 >>
    
    
    node03 | SUCCESS | rc=0 >>
    
    
    node02 | SUCCESS | rc=0 >>
    
    ###sdd盘
    [root@node01 ~]# ansible all -m shell -a "parted /dev/sdd -s mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO3_B 101 100%" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node03 | SUCCESS | rc=0 >>
    
    
    node01 | SUCCESS | rc=0 >>
    
    
    node02 | SUCCESS | rc=0 >>

此步为设置db空间

db空间的数量对就slow空间数量，比如每台节点有3个slow空间，那么此节点分配3个db空间即可。  
关于db空间的容量分配为。size/\{slow-num\}。此集群中，每个磁盘的容量为20GB，slow数量为3，那么db空间为20GB/3，6GB多点，我这边每个空间分配了5GB。  
wal空间与上类似。

先创建db空间gpt分区

[root@node01 ~]# ansible all -m shell -a "parted /dev/sde -s -- mklabel gpt mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO1_D 1 5001" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node01 | SUCCESS | rc=0 >>
    
    
    node02 | SUCCESS | rc=0 >>
    
    
    node03 | SUCCESS | rc=0 >>

将此磁盘的剩余空间再创建两个db空间

[root@node01 ~]# ansible all -m shell -a "parted /dev/sde -s mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO2_D 5002 10001" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node01 | SUCCESS | rc=0 >>
    
    
    node02 | SUCCESS | rc=0 >>
    
    
    node03 | SUCCESS | rc=0 >>
    
    [root@node01 ~]# ansible all -m shell -a "parted /dev/sde -s mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO3_D 10002 15002" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node01 | SUCCESS | rc=0 >>
    
    
    node03 | SUCCESS | rc=0 >>
    
    
    node02 | SUCCESS | rc=0 >>

此步为设置wal空间  
先创建db空间gpt分区

[root@node01 ~]# ansible all -m shell -a "parted /dev/sdf -s -- mklabel gpt mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO1_W 1 5001" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node01 | SUCCESS | rc=0 >>
    
    
    node03 | SUCCESS | rc=0 >>
    
    
    node02 | SUCCESS | rc=0 >>

将此磁盘的剩余空间再创建两个wal空间

[root@node01 ~]# ansible all -m shell -a "parted /dev/sdf -s mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO2_W 5002 10001" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node02 | SUCCESS | rc=0 >>
    
    
    node01 | SUCCESS | rc=0 >>
    
    
    node03 | SUCCESS | rc=0 >>
    
    
    [root@node01 ~]# ansible all -m shell -a "parted /dev/sdf -s mkpart KOLLA_CEPH_OSD_BOOTSTRAP_BS_FOO3_W 10002 15002" 
    /usr/lib/python2.7/site-packages/ansible/parsing/vault/__init__.py:44: CryptographyDeprecationWarning: Python 2 is no longer supported by the Python core team. Support for it is now deprecated in cryptography, and will be removed in the next release.
      from cryptography.exceptions import InvalidSignature
    node02 | SUCCESS | rc=0 >>
    
    
    node01 | SUCCESS | rc=0 >>
    
    
    node03 | SUCCESS | rc=0 >>

**以上标签配置好，为了防止系统分区表没生效，最好把所以机器都重启。**

## 2 配置ceph.conf ##

这是kolla配置的情况下进行的，关于kolla的配置，可以参考我的其它文章

[root@node01 config]# pwd
    /etc/kolla/config
    [root@node01 config]# cat ceph.conf 
    [global]
    osd pool default size = 3
    osd pool default min size = 2
    mon_clock_drift_allowed = 2
    mon_clock_drift_warn_backoff = 30
    
    osd_deep_scrub_randomize_ratio = 0.0
    
    [mon]
    mon_allow_pool_delete = true
    
    [osd]
    osd_max_write_size = 1024
    osd_recovery_op_priority = 1
    osd_recovery_max_active = 1
    osd_recovery_max_single_start = 1
    osd_recovery_max_chunk = 1048576
    osd_recovery_threads = 1
    osd_max_backfills = 1
    osd_scrub_begin_hour = 22
    osd_scrub_end_hour = 7
    osd_recovery_sleep = 0
    osd_crush_update_on_start = false

globals.yml配置如下：

[root@node01 kolla]# cat globals.yml | grep -v ^$ | grep -v ^#
    ---
    kolla_base_distro: "centos"
    kolla_install_type: "source"
    openstack_release: "rocky"
    kolla_internal_vip_address: "192.168.122.253"
    docker_registry: "registry.example.com:4000"
    docker_namespace: "openstackbl"
    network_interface: "ens33"
    storage_interface: "ens38"
    cluster_interface: "ens39"
    neutron_external_interface: "ens37"
    keepalived_virtual_router_id: "77"
    enable_ceph: "yes"
    enable_ceph_rgw: "yes"
    enable_cinder: "yes"
    enable_cinder_backup: "yes"
    enable_grafana: "yes"
    enable_prometheus: "yes"
    enable_ceph_rgw_keystone: "yes"
    glance_backend_ceph: "yes"
    glance_enable_rolling_upgrade: "no"
    cinder_backend_ceph: "{ { enable_ceph }}"
    cinder_backup_driver: "ceph"
    nova_backend_ceph: "{ { enable_ceph }}"
    ironic_dnsmasq_dhcp_range:
    tempest_image_id:
    tempest_flavor_ref_id:
    tempest_public_network_id:
    tempest_floating_network_name:
    enable_prometheus_ceph_mgr_exporter: "{ { enable_prometheus | bool and enable_ceph | bool }}"
    ceph_osd_store_type: "bluestore"
    ceph_osd_wipe_disk: "yes-i-really-really-mean-it"
    [root@node01 kolla]#

## 3 部署ceph ##

部署的时候在kolla-ansible后面加上 -t ceph，就指定了只部署ceph

[root@node01 ~]# kolla-ansible -i /usr/share/kolla-ansible/ansible/inventory/multinode -t ceph deploy
    PLAY RECAP *********************************************************************************************
    localhost                  : ok=2    changed=0    unreachable=0    failed=0   
    node01                     : ok=76   changed=34   unreachable=0    failed=1   
    node02                     : ok=62   changed=32   unreachable=0    failed=0   
    node03                     : ok=62   changed=32   unreachable=0    failed=0

这儿有个错误提示：

TASK [ceph : Creating the Swift service and endpoint] **************************************************
    failed: [node01] (item={ u'interface': u'admin', u'url': u'http://192.168.122.253:6780/swift/v1'}) => { "changed": true, "item": { "interface": "admin", "url": "http://192.168.122.253:6780/swift/v1"}, "msg": "'Traceback (most recent call last):\\n File \"/tmp/ansible_vwPYil/ansible_module_kolla_keystone_service.py\", line 55, in main\\n for _service in cloud.keystone_client.services.list():\\n File \"/opt/ansible/lib/python2.7/site-packages/shade/_legacy_clients.py\", line 95, in keystone_client\\n self._identity_client\\n File \"/opt/ansible/lib/python2.7/site-packages/shade/openstackcloud.py\", line 616, in _identity_client\\n \\'identity\\', min_version=2, max_version=\\'3.latest\\')\\n File \"/opt/ansible/lib/python2.7/site-packages/shade/openstackcloud.py\", line 506, in _get_versioned_client\\n if adapter.get_endpoint():\\n File \"/opt/ansible/lib/python2.7/site-packages/keystoneauth1/adapter.py\", line 282, in get_endpoint\\n return self.session.get_endpoint(auth or self.auth, **kwargs)\\n File \"/opt/ansible/lib/python2.7/site-packages/keystoneauth1/session.py\", line 1200, in get_endpoint\\n return auth.get_endpoint(self, **kwargs)\\n File \"/opt/ansible/lib/python2.7/site-packages/keystoneauth1/identity/base.py\", line 380, in get_endpoint\\n allow_version_hack=allow_version_hack, **kwargs)\\n File \"/opt/ansible/lib/python2.7/site-packages/keystoneauth1/identity/base.py\", line 271, in get_endpoint_data\\n service_catalog = self.get_access(session).service_catalog\\n File \"/opt/ansible/lib/python2.7/site-packages/keystoneauth1/identity/base.py\", line 134, in get_access\\n self.auth_ref = self.get_auth_ref(session)\\n File \"/opt/ansible/lib/python2.7/site-packages/keystoneauth1/identity/generic/base.py\", line 206, in get_auth_ref\\n self._plugin = self._do_create_plugin(session)\\n File \"/opt/ansible/lib/python2.7/site-packages/keystoneauth1/identity/generic/base.py\", line 161, in _do_create_plugin\\n \\'auth_url is correct. %s\\' % e)\\nDiscoveryFailure: Could not find versioned identity endpoints when attempting to authenticate. Please check that your auth_url is correct. Unable to establish connection to http://192.168.122.253:35357: HTTPConnectionPool(host=\\'192.168.122.253\\', port=35357): Max retries exceeded with url: / (Caused by NewConnectionError(\\'<urllib3.connection.HTTPConnection object at 0x7f68f97c8890>: Failed to establish a new connection: [Errno 113] No route to host\\',))\\n'"}

是在创建swift时出错， 因为部署的时候没有部署keystone，所以无法创建user、service、endpoint，此步对ceph集群没有影响，可以忽略。

## 4 验证ceph集群 ##

通过ceph命令查看集群状态

[root@node01 ~]# docker exec -it ceph_mon ceph -s
      cluster:
        id:     107d8048-2640-4db8-a27b-503f6b100773
        health: HEALTH_OK
     
      services:
        mon: 3 daemons, quorum 192.168.123.4,192.168.123.5,192.168.123.6 (age 5m)
        mgr: node01(active, since 4m), standbys: node02, node03
        osd: 9 osds: 9 up (since 2m), 9 in (since 2m)
        rgw: 1 daemon active (radosgw.gateway)
     
      task status:
     
      data:
        pools:   4 pools, 128 pgs
        objects: 187 objects, 1.2 KiB
        usage:   51 GiB used, 170 GiB / 221 GiB avail
        pgs:     128 active+clean
     
    [root@node01 ~]#

此时ceph集群部署完成

## 5 遇到的问题 ##