centos7上harbor搭建实践记录

ゞ浴缸里的玫瑰 2022-11-22 05:20 125阅读 0赞

**一、docker安装**

1、删除原有docker:

sudo yum remove docker \\

docker-client \\

docker-client-latest \\

docker-common \\

docker-latest \\

docker-latest-logrotate \\

docker-logrotate \\

docker-selinux \\

docker-engine-selinux \\

docker-engine

**2****、配置系统docker****源**

sudo yum install -y yum-utils device-mapper-persistent-data lvm2

\#\# 注意：此处更换了阿里的源，适用国内用户

yum-config-manager --add-repo http://mirrors.aliyun.com/docker-ce/linux/centos/docker-ce.repo

3、查看docker安装列表，选择并安装

sudo yum list docker-ce --showduplicates

\# 此处直接安装最新版本的docker-ce

sudo yum install -y docker-ce

\# 注：如果要安装指定的版本可以参考下边的命令

sudo yum install -y docker-ce-3:19.03.8-3.el7.x86\_64

4、启动docker

sudo systemctl  enable docker &&  systemctl  start docker

**二、docker-compose**

sudo curl -L https://get.daocloud.io/docker/compose/releases/download/1.25.1/docker-compose-\`uname -s\`-\`uname -m\` -o /usr/local/bin/docker-compose

sudo chmod +x /usr/local/bin/docker-compose

docker-compose --version

三、harbor安装

1、下载（个人使用迅雷还是蛮快的）

https://github.com/vmware/harbor/releases/download/v1.1.2/harbor-offline-installer-v1.1.2.tgz

手册：https://github.com/bluecoffee1013/docker-library/blob/master/docs/How%20to%20install%20Harbor.md

2、安装

tar xvfz harbor-offline-installer-v1.1.2.tgz

编辑harbor.cfg（为避免手册失效，把手册内容复制过来）

harbor的nginx默认暴露本机的80端口，但是一般80端口都会被占用，我改成8060端口，如下是我的配置文件，有改动的地方我用\*\*标注了，大家也可以根据实际情况进行修改

\#\# Configuration file of Harbor

\#The IP address or hostname to access admin UI and registry service.

\#DO NOT use localhost or 127.0.0.1, because Harbor needs to be accessed by external clients.

\#修改成本地IP:暴露端口

\*\* hostname = 192.168.3.42:8060

\#The protocol for accessing the UI and token/notification service, by default it is http.

\#It can be set to https if ssl is enabled on nginx.

ui\_url\_protocol = http

\#The password for the root user of mysql db, change this before any production use.

db\_password = root123

\#Maximum number of job workers in job service

max\_job\_workers = 3

\#Determine whether or not to generate certificate for the registry's token.

\#If the value is on, the prepare script creates new root cert and private key

\#for generating token to access the registry. If the value is off the default key/cert will be used.

\#This flag also controls the creation of the notary signer's cert.

customize\_crt = on

\#The path of cert and key files for nginx, they are applied only the protocol is set to https

\#存放认证书的位置

\*\*ssl\_cert = ./data/cert/server.crt

\*\*ssl\_cert\_key = ./data/cert/server.key

\#The path of secretkey storage

\*\*secretkey\_path = ./data

\#Admiral's url, comment this attribute, or set its value to NA when Harbor is standalone

admiral\_url = NA

\#NOTES: The properties between BEGIN INITIAL PROPERTIES and END INITIAL PROPERTIES

\#only take effect in the first boot, the subsequent changes of these properties

\#should be performed on web ui

\#\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*BEGIN INITIAL PROPERTIES\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*

\#Email account settings for sending out password resetting emails.

\#Email server uses the given username and password to authenticate on TLS connections to host and act as identity.

\#Identity left blank to act as username.

email\_identity =

email\_server = smtp.mydomain.com

email\_server\_port = 25

email\_username = sample\_admin@mydomain.com

email\_password = abc

email\_from = admin <sample\_admin@mydomain.com>

email\_ssl = false

\#\#The initial password of Harbor admin, only works for the first time when Harbor starts.

\#It has no effect after the first launch of Harbor.

\#Change the admin password from UI after launching Harbor.

\# 默认的管理员登录密码

harbor\_admin\_password = Harbor12345

\#\#By default the auth mode is db\_auth, i.e. the credentials are stored in a local database.

\#Set it to ldap\_auth if you want to verify a user's credentials against an LDAP server.

auth\_mode = db\_auth

\#The url for an ldap endpoint.

ldap\_url = ldaps://ldap.mydomain.com

\#A user's DN who has the permission to search the LDAP/AD server.

\#If your LDAP/AD server does not support anonymous search, you should configure this DN and ldap\_search\_pwd.

\#ldap\_searchdn = uid=searchuser,ou=people,dc=mydomain,dc=com

\#the password of the ldap\_searchdn

\#ldap\_search\_pwd = password

\#The base DN from which to look up a user in LDAP/AD

ldap\_basedn = ou=people,dc=mydomain,dc=com

\#Search filter for LDAP/AD, make sure the syntax of the filter is correct.

\#ldap\_filter = (objectClass=person)

\# The attribute used in a search to match a user, it could be uid, cn, email, sAMAccountName or other attributes depending on your LDAP/AD

ldap\_uid = uid

\#the scope to search for users, 1-LDAP\_SCOPE\_BASE, 2-LDAP\_SCOPE\_ONELEVEL, 3-LDAP\_SCOPE\_SUBTREE

ldap\_scope = 3

\#Timeout (in seconds)  when connecting to an LDAP Server. The default value (and most reasonable) is 5 seconds.

ldap\_timeout = 5

\#Turn on or off the self-registration feature

\#是否允许用户注册

self\_registration = off

\#The expiration time (in minute) of token created by token service, default is 30 minutes

token\_expiration = 30

\#The flag to control what users have permission to create projects

\#The default value "everyone" allows everyone to creates a project.

\#Set to "adminonly" so that only admin user can create project.

\#只有管理员可以有权限创建项目

\*\*project\_creation\_restriction = adminonly

\#Determine whether the job service should verify the ssl cert when it connects to a remote registry.

\#Set this flag to off when the remote registry uses a self-signed or untrusted certificate.

verify\_remote\_cert = on

\#\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*END INITIAL PROPERTIES\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*\*

\#\#\#\#\#\#\#\#\#\#\#\#\#

**修改****docker-compose.yml**

找到proxy那一段代码，将80改成8060

proxy:

image: vmware/nginx:1.11.5-patched

container\_name: nginx

restart: always

volumes:

- ./common/config/nginx:/etc/nginx:z

networks:

- harbor

ports:

- 8060:80 //此处原来是80:80

- 443:443

- 4443:4443

depends\_on:

- mysql

- registry

- ui

- log

logging:

driver: "syslog"

options:

syslog-address: "tcp://127.0.0.1:1514"

tag: "proxy"

改完配置后，可以安装了。

./prepare

./install.sh

如果配置有问题，重新配置再执行下./install.sh就可以了。

个人按照手册去配置docker，结果一直无法启动。后面直接跳过，运行安装，也是可以的。

安装完成后，浏览器输入192.168.3.42:8060就可以打开控制台了，账号admin,密码Harbor12345。后台可以修改用户密码，还有其他配置信息，不一定要配置文件上修改安装。

三、项目创建与镜像推送

项目创建，打开管理后台，创建个项目harbor。

镜像推送：

1、docker配置

由于个人没有配置过daemon.json文件，如果已经存在就配置，不要使用以下命令，直接添加

"insecure-registries":\["192.168.20.120:8060"\]这个内容就好了，如\{  
  "registry-mirrors": \[ "https://registry.docker-cn.com"\],  
  "insecure-registries": \[ "192.168.20.120:8060"\]  
\}。没有的执行下面命令：

echo '\{"insecure-registries":\["192.168.20.120:8060"\]\}' > /etc/docker/daemon.json

配置完执行

systemctl restart docker

2、登录

docker login http://192.168.20.120:8060

输入账号密码就可以了。

3、测试镜像推送

docker images 查看已有镜像

这里我们测试推送nginx镜像

docker pull nginx  拉取镜像

docker tag nginx:latest 192.168.20.120:8060/harbor/nginx:1.19.3  打标签

docker push 192.168.20.120:8060/harbor/nginx:1.19.3    推送到harbor仓库