DHCP Server for Windows

阳光穿透心脏的1/2处 2022-10-13 05:07 3阅读 0赞

What is a DHCP Server?  
\----------------------

A DHCP Server is a protocol server for TCP/IP networks that  
supplies IP addresses to other computers. DHCP Server for Windows  
also supports TFTP, DNS and HTTP protocol which makes a nice   
package for easy and simple to install networks e.g. for  
remote boot and other purposes.

DHCP server runs on all Win32 capable Windows operating  
systems starting from Windows 95 to Windows 7.

Installation  
\------------

The DHCP Server is a portable application and runs from anywhere  
on your computer. Extract the content of the zip file wherever you like,  
e.g. D:\\dhcpsrv

You now find the following files in there:

Configuration with **dhcpwiz.exe**  
\------------------------------

In order to get the software running I'm suggesting to start dhcpwiz.exe  
first. The dhcpwiz.exe program is a wizard style configuration program for  
the DHCP server. It will guide you in 5 easy steps through the basic  
configuration of the software. If you are an advanced user just updating from  
an earlier version then plesae go straight to the Web site   
http://www.dhcpserver.de/ and learn whats new in this version.

1. Welcome to the DHCP configuration wizard.  
There is not much more to do than to hit the next button.

2. Network interface cards.  
The DHCP configuration wizard lists all currently identified network  
interfaces on your computer. It is necessary to select one. This is  
going to be the interface that will be used by DHCP server. **It is a good  
idea to choose a network interface that by itself is not getting it's  
IP address from a DHCP server. This would probably cause conflicts.  
Hit next after interface has been selected.**

3. Supported Protocols.  
Now you can select which TCP/IP protocols should be activated.  
**I'm suggesting to enable HTTP (Web Server) and hit next**.

4. Configuring DHCP for interface.  
In this step you define the pool of IP addresses. A client will get an  
IP addresses assigned out of this pool. The default values should be good  
and lead you to the next step after hitting the next button.

5. Writing the INI file.  
The final result of the DHCP configuration wizard is an INI file. This file  
will contain all the configuration options. The filename and path shown here  
should point to **d:\\dhcpsrv\\dhcpsrv.ini**, depending on where you've exctracted  
the zip file. It is important that the INI file is placed into the same folder  
as **dhcpsrv.exe** resides. If that is all ok, then hit the "Write INI file" and  
the the next button to start the final step of the configuration.

6. DHCP configuration completed.  
The windows firewall is a great thing to have. But it can be a pain also to   
get communication server programs working. That is the reason why the wizard   
gives you at this stage the option to add the dhcp server program to the   
exception list of the windows firewall. Please hit the configure button and   
wait for the status to change from "Not configured" to "configured". If you   
are not running the DHCP configuration wizard with administrator privileges,   
then you need to do that after you have elevated your rights accordingly by   
hitting the "Admin..." button.

It is now time to start the DHCP server program. The DHCP server can run as   
a service or as an application. If you want to run it as a service then you   
can install and start the service here also. Again, non-administrators can   
do that only after elevation (the "Admin..." button). The status needs to   
change from "Not installed" to "Running". If you decide not to install DHCP   
server as a service but wants to run DHCP server as an application, then you   
can tick the "Run DHCP server immediatly" check box and click finish.

Running dhcpsrv.exe   
\-------------------

Once the INI file has been created by the DHCP configuration wizard, it is now  
time to start the actual DHCP server program. Start the dhcpsrv.exe.

If you are running Windows NT or Windows 2000/XP/VISTA/7 then the DHCP server will ask show  
a dialog box. On all older operating systems (Windows 98, etc..) the DHCP server will   
go straight into the tray as a tray icon application.  
The dialog allows you again to operate the service and the firewall.

Check if DHCP server works as expected  
\--------------------------------------

Once the DHCP configuration has been performed and DHCP server is started, you probably  
want to know whether it actually works. **If you have activated the HTTP support as part  
of step3 during the DHCP configuration wizard, then you can use your internet browser to   
open the DHCP status web site:   http://127.0.0.1/dhcpstatus.xml**  
**This should show the configured and operating connections and also all currently   
active clients. I assume there aren't any yet.**

**Once a DHCP client is assigned an IP address it will show up after reloading the page.**

Please visit my web site regularily to check for updates and any further reading.  
If you have any questions or recommendations:  
E-Mail me: Uwe.Ruttkamp@gmx.net  
or visit my WEB page: http://www.dhcpserver.de/